PLA Sparkle
4 products from 4 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
4 products
Key
- set apart: test bar not described as printed, or no stated load
- Izod where no Charpy is published
- not published
How the numbers are worked out
Bambu Lab PLA SparkleStrength XY, MPa39Strength Z, MPa32Modulus XY, GPa1.94Charpy notched, kJ/m²23.2HDT 0.45, °C55HDT 1.8, °C53Price, CAD/kg32Nozzle, °C190–230Bed, °C35–45Chamber, °C25–45Drying, °C, h558 h
Bambu Lab PLA SparkleBambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Sparkle20 valuesUnless a row says otherwise: printed specimendryDried before testing (see preparation)as printedAll the specimens were annealed and dried at 55 °C for 8 hours before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 220 °C Bed Temperature 35 °C Printing Speed 200 mm/s InfillDensity 100% *Allthe specimens were annealed and dried at 55 °C for 8 hours before testing. 1. Tensile Testing 2. Bending Testing 3. Impact Testing • Disclaimer The performance values are tested by standard samples at Bambu Lab, and the values are for design | |||
| Tensile modulus XY | 1940 ± 230 MPap. 2: Young's Modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 1660 ± 210 MPap. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 39 ± 3 MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 32 ± 2 MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 11.7 ± 0.7 %p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 6.8 ± 0.6 %p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 2350 ± 140 MPap. 2: Bending Modulus (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 75 ± 4 MPap. 2: Bending Strength (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 51 ± 2 MPap. 2: Bending Strength (Z) | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 66.5 ± 3.6 kJ/m²;p. 2: Impact Strength (X-Y) — unnotched | ISO 179, GB/T 1043 | not in the median: unnotched |
| Charpy impact strength XY | 23.2 ± 2.4 kJ/m²p. 2: Impact Strength (X-Y) — notched | ISO 179, GB/T 1043 | in the median |
| Charpy impact strength Z | 10.3 ± 0.7 kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 55 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 0.45 MPa | in the median |
| HDT at 1.8 MPa | 53 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 1.8 MPa | in the median |
| Glass transition temperature | 56 °Cp. 2: Glass Transition Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | in the median |
| Vicat softening temperature | 57 °Cp. 2: Vicar Softening Temperature | ISO 306, GB/T 1633 | |
| Melting temperature | 156 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.26 g/cm³p. 2: Density | specimen not stated, ISO 1183 | |
| Water absorption | 0.44 %p. 2: Saturated Water Absorption | no standard namedAs the sheet prints it: ption 25 °C, 55% RH | |
| Melt mass-flow rate | 34.2 ± 3.3 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
| Also named without a value: crystallization temperature. | |||
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 35–45 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 55 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190 - 230 °C; Bed 35 - 45 °C; Chamber 25-45 °C; Drying 55 °C, 8 hoursBambu Lab, Bambu Filament Technical Data Sheet - PLA SparkleRecommended printing settings
Price
32 CAD/kgits one regular price in the sample
2 listings: 1 in its price, 1 with no regular price per kilogram recorded
- Bambu Lab Canada: 32 CAD/kgPLA Sparkle - Alpine Green Sparkle (13501) / Filament with spool / 1 kgin its price; seen 10 Sep 2026
- Bambu Lab Canada: 32 per kg, sale pricePLA Sparkle - Crimson Red Sparkle (13200) / Filament with spool / 1 kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
Its 2 documents
What the maker says (7)
- Benefits
PLA is the most common material in 3D printing as it's easy to print and inexpensive.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Sparklep. 1 - Benefits
Meanwhile, its stiffness and strength can meet most printing needs.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Sparklep. 1 - Benefits
It is worth mentioning that it can biodegrade in some artificial composting conditions.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Sparklep. 1 - Pitfalls and limitations
However, it is not recommended to use a 0.2 mm nozzle for printing as clogging may occur.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Sparklep. 1 - Surface finish
With metal particles included in its composition, Bambu PLA Sparkle adds a special sparkling look to your prints that sets them apart from the rest.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Sparklep. 1 - Supports and removal
Support Material Support for PLA
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Sparklep. 2 - Odour and emissions
Odor Odorless
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Sparklep. 3
Chemicals and environment (6)
- Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - PLA SparkleSolubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA SparkleResistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA SparkleResistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - PLA SparkleResistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - PLA SparkleResistance to Oil and Grease - Flammability: described in words
Flammable and self-extinguishing in the air
Bambu Lab, Bambu Filament Technical Data Sheet - PLA SparkleFlammability
SUNLU PLA TwinklingStrength XY, MPa59Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²3.1IzodHDT 0.45, °C51HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–240Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU PLA TwinklingSUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, TECHNICAL DATA SHEET ISO PLA Twinkling15 valuesUnless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 59 ± 4 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Elongation at break XY | 12.5 ± 3 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural modulus XY | 3100 ± 250 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural strength XY | 97 ± 3 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength XY | 3.1 ± 1.2 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength ZX | 8.7 ± 3 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | not in the median: unnotched |
| Hardness | 78.5 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | |
| HDT XY, at 0.45 MPa | 50.8 ± 3 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | in the median |
| Glass transition temperature | 63 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-2 | in the median |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temp. ISO 306 5kg, 50℃/h ℃ | ISO 306As the sheet prints it: 5kg ISO 306 | |
| Melting temperature | 164 ℃p. 1: Melting Temperature ISO 11357-3 10 ℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Decomposition temperature | ≥374 ℃p. 1: @5%Decomposition Temp. | ISO 11358As the sheet prints it: ISO 11358; rate=20 ℃/min; loss=5% | |
| Density | 1.25 g/cm3p. 1: Density ISO 1183 23℃ g/cm3 | specimen not stated, ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 8.6 ± 2 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 190℃/2.16 kg g/10 min | ISO 1133As the sheet prints it: 190℃/2.16 kg ISO 1133 | |
| Mould shrinkage orientation not stated | 0.1-0.3 %p. 1: Moulding Shrinkage | ISO 294tested at 23℃ | |
Print settings
- Nozzle
- 200–240 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200-210; 210-240; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO PLA Twinklingp. 2: Recommended printing settings; p. 2: Nozzle Temp.
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Surface finish
Contains 15% glitter, giving printed models a sparkling, shimmering appearance.
SUNLU, TECHNICAL DATA SHEET ISO PLA Twinklingp. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO PLA Twinklingp. 2
Spectrum PLA GlitterStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C185–215Bed, °C0–45Chamber, °CnoneDrying, °C, h454 h
Spectrum PLA GlitterSpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET PLA Glitter11 values | |||
| Tensile modulus orientation not stated | 3.5 Gpap. 1: Tensile Modulus | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
| Tensile yield strength orientation not stated | 60 MPap. 1: Tensile Yield Strength | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
| Tensile break strength orientation not stated | 53 MPap. 1: Tensile Strength at Break | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
| Elongation at break orientation not stated | 6,00 %p. 1: Tensile Elongation | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
| Flexural modulus orientation not stated | 3.8 MPaphysically implausiblep. 1: Flexural Modulus | ASTM D790As the sheet prints it: D790 | not in the median: physically implausible as published |
| Flexural strength orientation not stated | 83 MPap. 1: Flexural Strength | ASTM D790As the sheet prints it: D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 16 J/mp. 1: Notched Izod Impact | ASTM D256As the sheet prints it: D 256 | not in the median: in J/m |
| HDT | 55 °Cp. 1: Heat Distortion Temperature | ASTM E2092As the sheet prints it: E 2092 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 55-60 °Cp. 1: Glass Transition Temperature | ASTM D3418As the sheet prints it: D3418 | in the median |
| Density | 1.24 g/cm3p. 1: Specific Gravity | ASTM D792As the sheet prints it: D 792 | |
| Melt mass-flow rate | 6 g/10minp. 1: MFR (210°C, 2.16kg) | ASTM D1238As the sheet prints it: 210°C 2.16kg D 1238 | |
Print settings
- Nozzle
- 185–215 °Cown data sheet
- Bed
- 0–45 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 45 °C for 4 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 4 print profiles, in the documents' words
- Nozzle 185-215°C; Bed 0-45°CSpectrum, TECHNICAL DATA SHEET PLA Glitterp. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box; p. 1: Recommended nozzle
- Nozzle 185-215 °C; Bed 0-45 °C; Chamber not necessarySpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Nozzle temp. [°C]; p. 4: Bed temp. [°C]; p. 4: Closed chamber for printing; p. 4: Dry box recommended; p. 4: Ruby or hardened nozzle recommended; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
- Drying 45°C, 4h; OptionalSpectrum, Filament drying - Spectrum Filamentsp. 1: Drying time; Drying temperature; Need for drying
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- 3D Printing Canada: 35 per kg, sale priceClear Gold - Spectrum Glitter PLA Filament - 1.75mm, 1kg (SKU 67bbba01b85b1)not used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 5 documents
What the maker says (7)
- Benefits
easy to print
Spectrum, TECHNICAL DATA SHEET PLA Glitterp. 1 - Surface finish
There is a possibility to control the gloss level by increasing/decreasing the wall thickness.
Spectrum, TECHNICAL DATA SHEET PLA Glitterp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET PLA Glitterp. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET PLA Glitterp. 1 - Nozzle wear
not abrasive
Spectrum, TECHNICAL DATA SHEET PLA Glitterp. 1 - Benefits
Unique glitter-gloss effect, reduced visibility of layers, not abrasive
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20 - Surface finish
Unique glitter-gloss effect, reduced visibility of layers
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20
eSUN TwinklingStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C45–60Chamber, °C—Drying, °C, h—
eSUN TwinklingeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, Twinkling Technical Data Sheet6 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 58 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 2100 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 70 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 4 kJ/m2p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT | 67 ℃p. 1: Heat distortion Temperature GB/T 1634 | GB/T 1634 | not in the median: measured on a moulded bar |
| Density | 1.41 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200- 230℃; Bed 45-60°CeSUN, Twinkling Technical Data Sheetp. 2: Recommended printing settings; p. 2: Based on
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Good for
Toys
eSUN, Twinkling Technical Data Sheetp. 1 - Benefits
This material is based on PLA material which bring it not only with characteristic of easy to print as PLA but also with special glittering color.
eSUN, Twinkling Technical Data Sheetp. 1 - Pitfalls and limitations
The material is not easy to bend as the strong rigidity.
eSUN, Twinkling Technical Data Sheetp. 2 - Printing advice
Try to avoid any bending in feeding.
eSUN, Twinkling Technical Data Sheetp. 2
No product matches "".
Values are for the colour each sheet tested; pigment can change them.