PLA Marble

6 products from 6 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.

Key

set apart: test bar not described as printed, or no stated load
Izod where no Charpy is published
added filler or additive
not published

How the numbers are worked out

Bambu Lab PLA MarbleStrength XY, MPa33Strength Z, MPa30Modulus XY, GPa2.33Charpy notched, kJ/m²9.5HDT 0.45, °C56HDT 1.8, °C53Price, CAD/kg32Nozzle, °C190–230Bed, °C35–45Chamber, °C25–45Drying, °C, h558 h

Bambu Lab PLA MarbleBambu Lab

Published values

Property	As published	Conditions	On the Overview
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Marble21 valuesUnless a row says otherwise: printed specimen dry Dried before testing (see preparation) as printed All the specimens were annealed and dried at 55 °C for 8 h before testing print settings Specimen Printing Conditions Subjects Data Nozzle Temperature 220 °C Bed Temperature 35 °C Printing Speed 200 mm/s Infill Density 100% *All the specimens were annealed and dried at 55 °C for 8 h before testing. And the suggested annealing temperature of models printed with Bambu PLA Marble is 50 to 60 °C, and the time is 6 to 12 hours. The annealing effect depends on the anne
Tensile modulus XY	2330 ± 240 MPap. 2: Young's Modulus (X-Y)	ISO 527, GB/T 1040	in the median
Tensile modulus Z	1970 ± 210 MPap. 2: Young's Modulus (Z)	ISO 527, GB/T 1040	in the median
Tensile strength (yield or break not stated) XY	33 ± 4 MPap. 2: Tensile Strength (X-Y)	ISO 527, GB/T 1040	in the median
Tensile strength (yield or break not stated) Z	30 ± 4 MPap. 2: Tensile Strength (Z)	ISO 527, GB/T 1040	in the median
Elongation at break XY	6.7 ± 0.5 %p. 2: Breaking Elongation Rate (X-Y)	ISO 527, GB/T 1040	in the median
Elongation at break Z	5.3 ± 0.4 %p. 2: Breaking Elongation Rate (Z)	ISO 527, GB/T 1040	in the median
Flexural modulus XY	2920 ± 180 MPap. 2: Bending Modulus (X-Y)	ISO 178, GB/T 9341	in the median
Flexural modulus Z	2560 ± 170 MPap. 2: Bending Modulus (Z)	ISO 178, GB/T 9341	in the median
Flexural strength XY	75 ± 5 MPap. 2: Bending Strength (X-Y)	ISO 178, GB/T 9341	in the median
Flexural strength Z	55 ± 4 MPap. 2: Bending Strength (Z)	ISO 178, GB/T 9341	in the median
Charpy impact strength XY	24.0 ± 2.5 kJ/m²;p. 2: Impact Strength (X-Y) — unnotched	ISO 179, GB/T 1043	not in the median: unnotched
Charpy impact strength XY	9.5 ± 2.6 kJ/m²p. 2: Impact Strength (X-Y) — notched	ISO 179, GB/T 1043	in the median
Charpy impact strength Z	6.5 ± 0.8 kJ/m²p. 2: Impact Strength (Z)	ISO 179, GB/T 1043	not in the median: notch not stated
HDT at 0.45 MPa	56 °Cp. 2: Heat Deflection Temperature	ISO 75 As the sheet prints it: ISO 75 0.45 MPa	in the median
HDT at 1.8 MPa	53 °Cp. 2: Heat Deflection Temperature	ISO 75 As the sheet prints it: ISO 75 1.8 MPa	in the median
Glass transition temperature	56 °Cp. 2: Glass Transition Temperature	DSC As the sheet prints it: DSC, 10 °C/min	in the median
Vicat softening temperature	57 °Cp. 2: Vicar Softening Temperature	ISO 306, GB/T 1633
Melting temperature	156 °Cp. 2: Melting Temperature	DSC As the sheet prints it: DSC, 10 °C/min
Density	1.22 g/cm³p. 2: Density	specimen not stated, ISO 1183
Water absorption	0.44 %p. 2: Saturated Water Absorption Rate	no standard named As the sheet prints it: te 25 °C, 55% RH tested at 25°C
Melt mass-flow rate	32.2 ± 4.5 g/10 minp. 2: Melt Index	specimen not stated, no standard named As the sheet prints it: 210 °C, 2.16 kg tested at 210°Cmoisture state not statedtreatment not stated

Print settings

Nozzle: 190–230 °Cown data sheet
Bed: 35–45 °Cown data sheet
Heated chamber: 25–45 °Cown data sheet
Drying: 55 °C for 8 hown data sheet
Hardened nozzle: not stated

Its print profile, in the documents' words

Nozzle 190 - 230 °C; Bed 35 - 45 °C; Chamber 25 - 45 °C; Drying 55 °C, 8 hoursBambu Lab, Bambu Filament Technical Data Sheet - PLA MarbleRecommended printing settings

Price

32 CAD/kgits one regular price in the sample

1 listing

Bambu Lab Canada: 32 CAD/kgPLA Marble - White Marble (13103) / Filament with spool / 1 kgin its price; seen 10 Sep 2026

Its 2 documents

What the maker says (8)

BenefitsPLA is the most common material in 3D printing as it's easy to print and inexpensive.Bambu Lab, Bambu Filament Technical Data Sheet - PLA Marblep. 1
BenefitsMeanwhile, its stiffness and strength can meet most printing needs.Bambu Lab, Bambu Filament Technical Data Sheet - PLA Marblep. 1
BenefitsIt is worth mentioning that it can biodegrade in some artificial composting conditions.Bambu Lab, Bambu Filament Technical Data Sheet - PLA Marblep. 1
Pitfalls and limitationsHowever, it is not recommended to use a 0.2 mm nozzle for printing as clogging may occur.Bambu Lab, Bambu Filament Technical Data Sheet - PLA Marblep. 1
Surface finishBambu PLA Marble is a unique filament that mimics the appearance of natural stone.Bambu Lab, Bambu Filament Technical Data Sheet - PLA Marblep. 1
Surface finishWith inorganic particles in its composition, this filament offers a vivid stone-like texture that resembles marble, granite, or bricks.Bambu Lab, Bambu Filament Technical Data Sheet - PLA Marblep. 1
Supports and removalSupport Material Support for PLABambu Lab, Bambu Filament Technical Data Sheet - PLA Marblep. 2
Odour and emissionsOdor OdorlessBambu Lab, Bambu Filament Technical Data Sheet - PLA Marblep. 3

Specimen preparation (1)

All the specimens were annealed and dried at 55 °C for 8 h before testingBambu Lab, Bambu Filament Technical Data Sheet - PLA MarbleTest specimen preparation

Chemicals and environment (7)

Water solubility: insolubleInsoluble in waterBambu Lab, Bambu Filament Technical Data Sheet - PLA MarbleSolubility
Acid resistance: not resistantNot resistantBambu Lab, Bambu Filament Technical Data Sheet - PLA MarbleResistance to Acid
Alkali resistance: not resistantNot resistantBambu Lab, Bambu Filament Technical Data Sheet - PLA MarbleResistance to Alkali
Organic solvent resistance: limitedNot resistant to some organic solventsBambu Lab, Bambu Filament Technical Data Sheet - PLA MarbleResistance to Organic Solvent
Oil and grease resistance: limitedResistant to most kinds of oil and greaseBambu Lab, Bambu Filament Technical Data Sheet - PLA MarbleResistance to Oil and Grease
Flammability: flammableFlammableBambu Lab, Bambu Filament Technical Data Sheet - PLA MarbleFlammability
Post-processing: described in wordsthe suggested annealing temperature of models printed with Bambu PLA Marble is 50 to 60 °C, and the time is 6 to 12 hours.Bambu Lab, Bambu Filament Technical Data Sheet - PLA Marblep. 3: Annealing note

Eryone Marble PLAStrength XY, MPa53.8Strength Z, MPa22.8Modulus XY, GPa1.73Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg31Nozzle, °C200–220Bed, °C55–70Chamber, °CnoneDrying, °C, h50–606 h

Eryone Marble PLAEryone

Published values

Property	As published	Conditions	On the Overview
Eryone, Technical Data Sheet (TDS) Marble PLA13 valuesUnless a row says otherwise: printed specimen print settings printing temperature=210° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm
Tensile modulus XY	1730.9 MPap. 2: Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.1-2006	in the median
Tensile modulus Z (X-Z)	1683.4 MPap. 2: Elastic modulus X-Z 50mm/min GB/T 1040.1-2006 MPa	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.1-2006	in the median
Tensile strength (yield or break not stated) XY	53.8 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.4	in the median
Tensile strength (yield or break not stated) Z (X-Z)	22.8 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPa	GB/T 1843 As the sheet prints it: 50mm/min GB/T 1843	in the median
Elongation at break XY	2.1 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 %	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.4	in the median
Elongation at break Z (X-Z)	1.7 %p. 2: Elongation at break X-Z 50mm/min GB/T 1040.4 %	GB/T 1040 As the sheet prints it: 50mm/min GB/T 1040.4	in the median
Flexural modulus orientation not stated	3025.7 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa	GB/T 9341 As the sheet prints it: 2mm/min GB/T 9341	in the median
Flexural strength orientation not stated	88.9 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa	GB/T 9341 As the sheet prints it: 2mm/min GB/T 9341	in the median
Impact strength, test unclear	3.8 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1843 kJ/m2	GB/T 1843 As the sheet prints it: 2.75J GB/T 1843 Which test: probably Izod	listed under other properties
HDT at 0.45 MPa	53 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃	specimen not stated; its document points to a moulded or resin bar, ASTM D648 As the sheet prints it: 0.45MPa ASTM D648 print settings not stated	not in the median: set apart (never used to pass), test bar not described as printed
Vicat softening temperature	57 ℃p. 1: Vicat Softening Temperature(° ASTM D1525 (ISO 306 GB/T ℃	specimen not stated, ASTM D1525, ISO 306print settings not stated
Density	1.25 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T g/cm³	specimen not stated, ASTM D792, ISO 1183 As the sheet prints it: g/cm³ at 21.5 ° C) GB/T ASTM D792 ISO 1183 tested at 21.5°Cprint settings not stated
Melt mass-flow rate	32 g/10minp. 1: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min	specimen not stated, no standard named As the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg tested at 220°Cprint settings not stated

Print settings

Nozzle: 200–220 °Cown data sheet
Bed: 55–70 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 50–60 °C for 6 hown data sheet
Hardened nozzle: not stated

Its print profile, in the documents' words

Nozzle 200℃-220℃; Bed 55-70℃; Drying 50℃-60℃,6hEryone, Technical Data Sheet (TDS) Marble PLAp. 1: Recommended printing settings; p. 1: Drying conditions; p. 1: Sealed printing

Price

31 CAD/kgits one regular price in the sample

1 listing

ERYONE Canada: 31 CAD/kgPLA Marble Filament - 1.75mm±0.03mm (1kg) / PLA Marble (SKU B0105001)in its price; seen 30 Sep 2026

Its 2 documents

What the maker says (2)

Good forIt is widely used in sculptures, artworks, and architectural style printed works.Eryone, Technical Data Sheet (TDS) Marble PLAp. 1
Surface finishIt has a smooth and delicate surface, with an elegant textureEryone, Technical Data Sheet (TDS) Marble PLAp. 1

SUNLU High Speed Marble PLAStrength XY, MPa41Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²11IzodHDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–260Bed, °C50–60Chamber, °CnoneDrying, °C, h50

SUNLU High Speed Marble PLASUNLU

Published values

Property	As published	Conditions	On the Overview
SUNLU, 产品资料 Version1.0 2024-614 valuesThe same values also in SUNLU, TECHNICAL DATA SHEET ISO High Speed Marble PLA.
Tensile strength (yield or break not stated) XY	41 MPap. 1: 拉伸强度(X-Y)Tensile Strength ISO527/2 50mm/min MPa	ISO 527 As the sheet prints it: 50mm/min ISO527/2 print settings 测试样条打印速度 45 mm/s，打印温度 210 ℃。填充 100%，走线方式为 90 度。	not in the median: another value of this product is in it
Elongation at break XY	80 %p. 1: 断裂伸长率(X-Y) Elongation at break ISO527/2 50mm/min %	ISO 527 As the sheet prints it: 50mm/min ISO527/2 print settings 测试样条打印速度 45 mm/s，打印温度 210 ℃。填充 100%，走线方式为 90 度。	not in the median: another value of this product is in it
Flexural modulus XY	3400 MPap. 1: 弯曲模量 (X-Y) Flexural Modulus ISO178 2mm/min MPa	ISO 178 As the sheet prints it: 2mm/min ISO178 print settings 测试样条打印速度 45 mm/s，打印温度 210 ℃。填充 100%，走线方式为 90 度。	not in the median: another value of this product is in it
Flexural strength XY	70 MPap. 1: 弯曲强度 (X-Y) Flexural Strength ISO178 2mm/min MPa	ISO 178 As the sheet prints it: 2mm/min ISO178 print settings 测试样条打印速度 45 mm/s，打印温度 210 ℃。填充 100%，走线方式为 90 度。	not in the median: another value of this product is in it
Izod impact strength XY	11 KJ/m2p. 1: 悬臂梁缺口冲击强度(X-Y)IZOD Impact ISO180 23℃ KJ/m2 Notched	ISO 180 As the sheet prints it: 23℃ ISO180 tested at 23°C print settings 测试样条打印速度 45 mm/s，打印温度 210 ℃。填充 100%，走线方式为 90 度。	not in the median: another value of this product is in it
Izod impact strength ZX	7.2 KJ/m2p. 1: 悬臂梁缺口冲击强度(Z-X)IZOD Impact ISO180 23℃ KJ/m2 Notched	ISO 180 As the sheet prints it: 23℃ ISO180 tested at 23°C print settings 测试样条打印速度 45 mm/s，打印温度 210 ℃。填充 100%，走线方式为 90 度。	not in the median: measured on a bar in another orientation
Hardness	82 Shore (scale not specified by source)p. 1: 邵氏硬度 Shore hardness ISO868 23℃ HA/HDalso in SUNLU, TECHNICAL DATA SHEET ISO High Speed Marble PLA	ISO 868 As the sheet prints it: 23℃ HA/HD ISO868 tested at 23°C
HDT XY, at 0.45 MPa	54.8 ℃p. 1: 热变形温度(X-Y)Heat Deflection (HDT) ISO75 0.45MPa ℃	ISO 75 As the sheet prints it: 0.45MPa ISO75	not in the median: another value of this product is in it
Vicat softening temperature	54 ℃p. 1: 维卡软化温度 Vicat Softening Temp. ISO306 5kg,50℃/h ℃also in SUNLU, TECHNICAL DATA SHEET ISO High Speed Marble PLA	ISO 306 As the sheet prints it: 5kg ISO306
Melting temperature	164 ℃p. 1: 熔点温度 Melting Point ISO11357-3 10℃/min ℃also in SUNLU, TECHNICAL DATA SHEET ISO High Speed Marble PLA	ISO 11357 As the sheet prints it: ISO11357-3
Decomposition temperature	374 ℃p. 1: 分解温度@5%Decomposition Temp. ISO11358 20℃/min ℃	ISO 11358
Density	1.25 g/cm3p. 1: 密度 Density ISO1183 23℃ g/cm3	ISO 1183 As the sheet prints it: 23℃ ISO1183 tested at 23°C
Melt mass-flow rate	10.7 g/10minp. 1: 熔体指数 Melt Flow Rate ISO1133 190℃/2.16kg g/10min	ISO 1133 As the sheet prints it: 190℃/2.16kg ISO1133 tested at 190°C
Mould shrinkage orientation not stated	0.1-0.3 %p. 1: 收缩率 Mold Shrinkage ISO294 23℃ %	ISO 294 As the sheet prints it: 23℃ ISO294 tested at 23°C

SUNLU, TECHNICAL DATA SHEET ISO High Speed Marble PLA10 valuesThe same values also in SUNLU, 产品资料 Version1.0 2024-6.Unless a row says otherwise: printed specimen
Tensile strength (yield or break not stated) XY	41 ± 6 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa	ISO 527 As the sheet prints it: 50 mm/min ISO 527/2 print settings Printing speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation	in the median
Elongation at break XY	25 ± 7 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min %	ISO 527 As the sheet prints it: 50 mm/min ISO 527/2 print settings Printing speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation	in the median
Flexural modulus XY	3100 ± 400 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa	ISO 178 As the sheet prints it: 2 mm/min ISO 178 print settings Printing speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation	in the median
Flexural strength XY	72 ± 5 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa	ISO 178 As the sheet prints it: 2 mm/min ISO 178 print settings Printing speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation	in the median
Izod impact strength XY	11 ± 3 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen	ISO 180 As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180 tested at 23°C print settings Printing speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation	in the median
Izod impact strength ZX	7 ± 3 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen	ISO 180 As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180 tested at 23°C print settings Printing speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation	not in the median: unnotched
HDT XY, at 0.45 MPa	55 ± 3 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃	ISO 75 As the sheet prints it: 0.45 MPa ISO 75	in the median
Glass transition temperature	63 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃also in SUNLU, 产品资料 Version1.0 2024-6	ISO 11357 As the sheet prints it: ISO 11357-2	in the median
Density	1.26 g/cm3p. 1: Density ISO 1183 23℃ g/cm3	specimen not stated, ISO 1183 As the sheet prints it: 23℃ ISO 1183 tested at 23°C
Melt mass-flow rate	8.3 ± 2 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 190℃/2.16 kg g/10 min	ISO 1133 As the sheet prints it: 190℃/2.16 kg ISO 1133 tested at 190°C

Print settings

Nozzle: 210–260 °Cown data sheet
Bed: 50–60 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: 50 °Cown data sheet
Hardened nozzle: not stated

Its 2 print profiles, in the documents' words

Nozzle 210-230; 230-260; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO High Speed Marble PLAp. 2: Recommended printing settings; p. 2: Nozzle Temp.
Nozzle 190-210; 210-230; 230-260; Bed 50-60℃; Chamber 常温; Drying 50℃SUNLU, 产品资料 Version1.0 2024-6p. 2: Drying Temp.; p. 2: Nozzle Print Temp.; p. 2: 打印平台温度 Print Platform Temp.; p. 2: 打印平台材料 Print Platform Material

Price

Not in the price sample.

Its 3 documents

What the maker says (3)

Surface finishContains 0.4 mm marble particles, giving the printed models a distinctive marble-like texture.SUNLU, TECHNICAL DATA SHEET ISO High Speed Marble PLAp. 1
Supports and removalSupported Material PVASUNLU, TECHNICAL DATA SHEET ISO High Speed Marble PLAp. 2
Supports and removalSupport Material PVASUNLU, 产品资料 Version1.0 2024-6p. 2

Spectrum PLA Stone AgeStrength XY, MPa60Strength Z, MPa—Modulus XY, GPa3.5Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C185–225Bed, °C0–45Chamber, °CnoneDrying, °C, hnone

Spectrum PLA Stone AgeSpectrum

Published values

Property	As published	Conditions	On the Overview
Spectrum, TECHNISCHES MERKBLATT PLA Stone Age9 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	3.5 Gpap. 1: Elastizitätsmodul bei Dehnung	ASTM D882 As the sheet prints it: D 882	not in the median: set apart (never used to pass), test bar not described as printed
Tensile yield strength orientation not stated	60 MPap. 1: Zugfestigkeit an der Elastizitätsgrenze	ASTM D882 As the sheet prints it: D 882	not in the median: set apart (never used to pass), test bar not described as printed
Tensile break strength orientation not stated	53 MPap. 1: Zugfestigkeit an der Bruchgrenze	ASTM D882 As the sheet prints it: D 882	not in the median: another value of this product is in it
Elongation at break orientation not stated	6,00%p. 1: Dehnung bei Zugprüfung	ASTM D882 As the sheet prints it: D 882	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	3.8 MPaphysically implausiblep. 1: Elastizitätsmodul beim Biegen	ASTM D790 As the sheet prints it: D790	not in the median: physically implausible as published
Flexural strength orientation not stated	83 MPap. 1: Biegefestigkeit	ASTM D790 As the sheet prints it: D790	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength orientation not stated	16 J/mp. 1: Schlagbiegeprüfung nach Izod mit Kerbe	ASTM D256 As the sheet prints it: D 256 notched	not in the median: in J/m
Glass transition temperature	55-60°Cp. 1: Glasübergangstemperatur	ASTM D3418 As the sheet prints it: D3418	in the median
Melt mass-flow rate	6 g/10minp. 1: MFR (210°C, 2,16 kg)	ASTM D1238 As the sheet prints it: D 1238; 2,16 kg tested at 210 °C
Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO2 valuesUnless a row says otherwise: specimen not stated
HDT	55°Cp. 4: HDT	no standard stated	not in the median: set apart (never used to pass), test bar not described as printed
Density	1.24 g/cm³p. 4: Density [g/cm³]	no standard stated

Print settings

Nozzle: 185–225 °Cown data sheet
Bed: 0–45 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: not neededown data sheet
Hardened nozzle: not neededown data sheet

Its 4 print profiles, in the documents' words

Nozzle 185-225 °C; Chamber not necessarySpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Nozzle temp. [°C]; p. 4: Closed chamber for printing; p. 4: Adhesive
No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
Nozzle 185-230°C; Bed 0-50°CSpectrum, PLA Stone Age™p. 1: Tip; p. 1: Nozzle temperature [°C]; p. 1: Bed temperature [°C]; p. 1: Enclosure; p. 1: Drybox recommended; p. 1: Ruby or hardened nozzle recommended; p. 1: Adhesive
Nozzle 185-225°C; Bed 0-45°C; Drying nicht notwendigSpectrum, TECHNISCHES MERKBLATT PLA Stone Agep. 1: Druckkopftemperatur; p. 1: Heizbetttemperatur; p. 1: Filament Trockner; p. 1: Empfohlene Düse

Price

Not in the price sample.

Its 5 documents

What the maker says (1)

Printing adviceA major aspect is the use of printing nozzles with diameters of 0.4mm or more.Spectrum, PLA Stone Age™p. 1

SIDDAMENT PLA MarbleStrength XY, MPa29Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²5.2IzodHDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C180–210Bed, °C60Chamber, °CnoneDrying, °C, h502–4 h

SIDDAMENT PLA MarbleSIDDAMENT

Published values

Property	As published	Conditions	On the Overview
SIDDAMENT, PLA Marble - Technical Datasheet8 valuesUnless a row says otherwise: specimen not stated
Tensile strength (yield or break not stated) orientation not stated	29 MPap. 1: Tensile Strength ISO 527 MPa	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Elongation at break orientation not stated	4 %p. 1: Elongation at Break ISO 527 %	ISO 527	not in the median: set apart (never used to pass), test bar not described as printed
Flexural modulus orientation not stated	2034 MPap. 1: Flexural Modulus ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Flexural strength orientation not stated	48 MPap. 1: Bending Strength ISO 178 MPa	ISO 178	not in the median: set apart (never used to pass), test bar not described as printed
Izod impact strength	5.2 kJ/m2p. 1: Notched Impact Strength ISO 180 kJ/m2	ISO 180	not in the median: set apart (never used to pass), test bar not described as printed
HDT	53 °Cp. 1: Heat Deflection ISO 75 °C	ISO 75	not in the median: set apart (never used to pass), test bar not described as printed
Density	1.24 g/cm3p. 1: Density ISO 1183 g/cm3	ISO 1183
Water absorption	0.3 %p. 1: Water Absorption ISO 62 %	ISO 62

Print settings

Nozzle: 180–210 °Cown data sheet
Bed: 60 °Cown data sheet
Heated chamber: not requiredown data sheet
Drying: optional: 50 °C for 2–4 hown data sheet
Hardened nozzle: not stated

Its print profile, in the documents' words

Nozzle 180-210°C; Bed 60°C; Drying If damp, dry at 50°C for 2-4 hours.SIDDAMENT, PLA Marble - Technical Datasheetp. 1: Drying note; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Printing Platform; p. 2: Nozzle Diameter

Price

Not in the price sample.

Its 2 documents

What the maker says (1)

Supports and removalSupporting Material: Self-supporting, PVASIDDAMENT, PLA Marble - Technical Datasheetp. 2

FormFutura StoneFilStrength XY, MPa38Strength Z, MPa—Modulus XY, GPa4.76Charpy notched, kJ/m²2.9HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–240Bed, °C50–60Chamber, °C—Drying, °C, h—

FormFutura StoneFilFormFutura

Modified: declared dense filler. Its values are kept out of the material's medians.

Published values

Property	As published	Conditions	On the Overview
FormFutura, Technical Data Sheet StoneFil™8 valuesUnless a row says otherwise: specimen not stated
Tensile modulus orientation not stated	4760 Mpap. 1: Tensile modulus	ISO 527	not in the median: added filler or additive
Tensile yield strength orientation not stated	38.0 Mpap. 1: Tensile strength	ISO 527	not in the median: added filler or additive
Elongation at break orientation not stated	33 %p. 1: Elongation at break	ISO 527	not in the median: added filler or additive
Charpy impact strength	2.9 KJ/m²p. 1: Impact strength	ISO 179tested at 23° C (73° F)notched	not in the median: added filler or additive
Vicat softening temperature	57° C °Cp. 1: Viscat softening temp.	ISO 306 As the sheet prints it: ISO 306; VST/A/50 (50° C/h, 10N)
Melting temperature	77 - 153° C °Cp. 1: Melting termperature	ISO 11357
Density	1.7 g/ccp. 1: Specific gravity	ISO 1183
Melt mass-flow rate	94 g/10minp. 1: Melt flow rate	ISO 1133

Print settings

Nozzle: 190–240 °Cown data sheet
Bed: 50–60 °Cown data sheet
Heated chamber: not stated
Drying: not stated
Hardened nozzle: not stated

Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in FormFutura, StoneFil.

Its 2 print profiles, in the documents' words

Nozzle ± 190 - 240° CFormFutura, Technical Data Sheet StoneFil™p. 1: Recommended printing settings
Nozzle ± 185 – 225° C; Bed ± 50 – 60° CFormFutura, StoneFilp. 1: General printing guidelines

Price

Not in the price sample.

Its 3 documents

What the maker says (12)

Surface finishStoneFil™ is an easy-to-print filament and printed objects have an extremely matte stone-like finish with unique natural gradient linings resulting in a unique chromatic spectrum per print.FormFutura, Technical Data Sheet StoneFil™p. 1
Surface finishStoneFil is a PLA-based 3D printer filament with a 50% powdered stone filling, which give 3D printed parts true stone-like aesthetics and a rough and matt stone-like surface finish.FormFutura, StoneFilp. 1
BenefitsThis high stone-filling has resulted in a 3D printer filament with remarkable aesthetic features.FormFutura, StoneFilp. 1
Surface finishStoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish.FormFutura, StoneFilp. 1
BenefitsStoneFil is a filament which is based on our modified and easy-to-print EasyFil PLA compound.FormFutura, StoneFilp. 1
BenefitsEasy to printFormFutura, StoneFilp. 1
Surface finishMatte and rough stone-like finishFormFutura, StoneFilp. 1
Printing adviceExperience level: BeginnerFormFutura, StoneFilp. 1
Nozzle wearStoneFil has a very high filling with stone powders and therefore the filament can have a slightly more abrasive effect on brass nozzles than unfilled filaments.FormFutura, StoneFilp. 1
Printing adviceWhen printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle.FormFutura, StoneFilp. 1
Printing adviceThis will make sure that any potential fillers are flown out of your nozzle.FormFutura, StoneFilp. 1
Printing adviceIt is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.FormFutura, StoneFilp. 1

Values are for the colour each sheet tested; pigment can change them.