PLA Silk
33 products from 15 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
33 products
Key
- set apart: test bar not described as printed, or no stated load
- Izod where no Charpy is published
- sold as toughened
- shared data sheet
- not published
How the numbers are worked out
Bambu Lab PLA Silk Dual ColorStrength XY, MPa27Strength Z, MPa18Modulus XY, GPa1.83Charpy notched, kJ/m²8.2HDT 0.45, °C53HDT 1.8, °C50Price, CAD/kg32Nozzle, °C210–240Bed, °C35–45Chamber, °C25–45Drying, °C, h558 h
Bambu Lab PLA Silk Dual ColorBambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silk21 valuesUnless a row says otherwise: printed specimendryDried before testing (see preparation)as printedAll the specimens were annealed and dried at 55 °C for 8 h before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 230 °C Bed Temperature 35 °C Printing Speed 200 mm/s InfillDensity 100% * All the specimens were annealed and dried at 55 °C for 8 h before testing. And the suggested annealing temperature of models printed with Bambu PLA Silkis50 to 55 °C, and the time is6 to 12 hours. The annealing effect depends on the annealing | |||
| Tensile modulus XY | 1830 ± 210 MPap. 2: Young's Modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 1250 ± 140 MPap. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 27 ± 4 MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 18 ± 4 MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 3.5 ± 0.6 %p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 1.7 ± 0.2 %p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 2370 ± 150 MPap. 2: Bending Modulus (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 1840 ± 160 MPap. 2: Bending Modulus (Z) | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 66 ± 4 MPap. 2: Bending Strength (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 21 ± 5 MPap. 2: Bending Strength (Z) | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 24.5 ± 1.7 kJ/m²p. 2: Impact Strength (X-Y) | ISO 179, GB/T 1043unnotched | not in the median: unnotched |
| Charpy impact strength XY | 8.2 ± 0.5 kJ/m² (notched)p. 2: Impact Strength (X-Y) (notched) | ISO 179, GB/T 1043 | in the median |
| Charpy impact strength Z | 4.6 ±1.1 kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 53 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 0.45 MPa | in the median |
| HDT at 1.8 MPa | 50 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 1.8 MPa | in the median |
| Glass transition temperature | 57 °Cp. 2: Glass Transition Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | in the median |
| Vicat softening temperature | 56 °Cp. 2: Vicar Softening Temperature | ISO 306, GB/T 1633 | |
| Melting temperature | 152 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.32 g/cm³p. 2: Density | specimen not stated, ISO 1183 | |
| Water absorption | 0.52 %p. 2: Saturated Water | no standard namedAs the sheet prints it: 25 °C, 55% RH | |
| Melt mass-flow rate | 20.5 ± 1.2 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
| Also named without a value: crystallization temperature. | |||
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 35–45 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 55 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210 -240 °C; Bed 35 - 45°C; Chamber 25 -45 °C; Drying Blast Drying Oven: 55 °C, 8 hBambu Lab, Bambu Filament Technical Data Sheet - PLA SilkRecommended printing settings
Price
32 CAD/kgthe median of its 2 regular prices in the sample
2 listings
- Bambu Lab Canada: 32 CAD/kgPLA Silk Multi-Color - Gilded Rose (13901) / Filament with spool / 1 kgin its price; seen 10 Sep 2026
- 3D Printing Canada: 32 CAD/kgVelvet Eclipse (Black-Red) - Bambu Lab PLA Silk Dual Color Filament - 1.75mm, 1kg / Filament with spoolin its price; seen 10 Sep 2026
Its 2 documents
What the maker says (5)
- Good for
Ideal for printing aesthetic parts and decorative objects.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silkp. 1 - Surface finish
Retaining its silky texture and high-gloss features, this filament transitions between two colors, creating a natural and smooth gradient.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silkp. 1 - Printing advice
You can easily change the visible color by rotating the color-blending filament to different orientations.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silkp. 1 - Supports and removal
Support Material Support for PLA
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silkp. 2 - Odour and emissions
Odor Odorless
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silkp. 3
Specimen preparation (1)
All the specimens were annealed and dried at 55 °C for 8 h before testing
Bambu Lab, Bambu Filament Technical Data Sheet - PLA SilkTest specimen preparation
Chemicals and environment (6)
- Flammability: flammable
Flammable
Bambu Lab, Bambu Filament Technical Data Sheet - PLA SilkFlammability - Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - PLA SilkSolubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA SilkResistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA SilkResistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - PLA SilkResistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - PLA SilkResistance to Oil and Grease
Bambu Lab PLA Silk+Strength XY, MPa33Strength Z, MPa25Modulus XY, GPa2.13Charpy notched, kJ/m²10.3HDT 0.45, °C60HDT 1.8, °C56Price, CAD/kg31Nozzle, °C210–240Bed, °C35–45Chamber, °C25–45Drying, °C, h558 h
Bambu Lab PLA Silk+Bambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silk+21 valuesUnless a row says otherwise: printed specimendryDried before testing (see preparation)as printedAll the specimens were annealed and dried at 55 °C for 8 h before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 230 °C Bed Temperature 35 °C Printing Speed 200 mm/s InfillDensity 100% * All the specimens were printed at the following settings: Nozzle Temperature = 230 °C, Printing Speed = 200 mm/s, Bed Temperature = 35 °C, InfillDensity = 100%. All the specimens were annealed and dried at 55 °C for 8 h before testing. And th | |||
| Tensile modulus XY | 2130 ± 210 MPap. 2: Young's Modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 1850 ± 140 MPap. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 33 ± 4 MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 25 ± 4 MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 2.8 ± 0.6 %p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 1.5 ± 0.2 %p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 2460 ± 150 MPap. 2: Bending Modulus (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 2150 ± 160 MPap. 2: Bending Modulus (Z) | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 75 ± 4 MPap. 2: Bending Strength (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 30 ± 5 MPap. 2: Bending Strength (Z) | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 18.5 ± 1.6 kJ/m²;p. 2: Impact Strength (X-Y) — unnotched | ISO 179, GB/T 1043 | not in the median: unnotched |
| Charpy impact strength XY | 10.3 ± 0.5 kJ/m²p. 2: Impact Strength (X-Y) — notched | ISO 179, GB/T 1043 | in the median |
| Charpy impact strength Z | 8.5 ± 1.1 kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 60 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 0.45 MPa | in the median |
| HDT at 1.8 MPa | 56 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 1.8 MPa | in the median |
| Glass transition temperature | 57 °Cp. 2: Glass Transition Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | in the median |
| Vicat softening temperature | 66 °Cp. 2: Vicar Softening Temperature | ISO 306, GB/T 1633 | |
| Melting temperature | 158 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.27 g/cm³p. 2: Density | specimen not stated, ISO 1183 | |
| Water absorption | 0.40 %p. 2: Saturated Water | no standard namedAs the sheet prints it: 25 °C, 55% RH | |
| Melt mass-flow rate | 14.5 ± 1.2 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 35–45 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 55 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210 - 240 °C; Bed 35 - 45 °C; Chamber 25 - 45 °C; Drying Blast Drying Oven: 55 °C, 8 hBambu Lab, Bambu Filament Technical Data Sheet - PLA Silk+Recommended printing settings
Price
31 CAD/kgthe median of its 2 regular prices in the sample
3 listings: 2 in its price, 1 with no regular price per kilogram recorded
- Bambu Lab Canada: 30 CAD/kgPLA Silk+ - Gold (13405) / Filament with spool / 1 kgin its price; seen 10 Sep 2026
- Bambu Lab Canada: 26 per kg, sale pricePLA Silk+ - Gold (13405) / Refill / 1 kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
- 3D Printing Canada: 32 CAD/kgCandy Red - Bambu Lab PLA Silk+ Filament - 1.75mm, 1kg / Filament with spoolin its price; seen 10 Sep 2026
Its 2 documents
What the maker says (3)
- Surface finish
Bambu PLA Silk+ delivers both with its impressive strength, while still offering a stunning silk gloss finish.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silk+p. 1 - Supports and removal
Support Material Support for PLA
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silk+p. 2 - Odour and emissions
Odor Odorless
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silk+p. 3
Specimen preparation (1)
All the specimens were annealed and dried at 55 °C for 8 h before testing
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silk+Test specimen preparation
Chemicals and environment (7)
- Flammability: flammable
Flammable
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silk+Flammability - Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silk+Solubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silk+Resistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silk+Resistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silk+Resistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silk+Resistance to Oil and Grease - Post-processing: described in words
the suggested annealing temperature of models printed with Bambu PLA Silk+ is 50 to 55 °C, and the time is 6 to 12 hours.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Silk+p. 3: Annealing note
Eryone Hyper Speed Dual Color Silk PLAStrength XY, MPa62.7Strength Z, MPa19.1Modulus XY, GPa1.93Charpy notched, kJ/m²—HDT 0.45, °C50HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C55–70Chamber, °CnoneDrying, °C, h50–606 h
Eryone Hyper Speed Dual Color Silk PLAEryone
Data sheet shared with Eryone Hyper Speed Triple Color Silk PLA: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Eryone, Technical Data Sheet (TDS) Hyper Speed Dual Color Silk PLA15 valuesThe same values also in Eryone, Technical Data Sheet (TDS) Hyper Speed Triple Color Silk PLA.Unless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 1932.1 MPap. 2: Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=215 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile modulus Z (X-Z) | 1873.5 MPap. 2: Elastic modulus X-Z 50mm/min GB/T 1040.1-2006 MPaalso in Eryone, Technical Data Sheet (TDS) Hyper Speed Triple Color Silk PLA | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=215 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) XY | 62.7 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=215 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) Z (X-Z) | 19.1 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPaalso in Eryone, Technical Data Sheet (TDS) Hyper Speed Triple Color Silk PLA | GB/T 1843As the sheet prints it: 50mm/min GB/T 1843print settingsprinting temperature=215 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Elongation at break XY | 2.3 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=215 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Elongation at break Z (X-Z) | 1.9 %p. 2: Elongation at break X-Z 50mm/min GB/T 1040.4 %also in Eryone, Technical Data Sheet (TDS) Hyper Speed Triple Color Silk PLA | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=215 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural modulus orientation not stated | 2917.3 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=215 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural strength orientation not stated | 86.7 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=215 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Charpy impact strength orientation not stated | 3.8 kJ/m2p. 2: Charpy Impact strenght | GB/T 1843As the sheet prints it: GB/T 1843; energy=2.75J | not in the median: notch not stated |
| Impact strength, test unclear | 3.8 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1843 kJ/m2 | GB/T 1843As the sheet prints it: 2.75J GB/T 1843print settingsprinting temperature=215 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | listed under other properties |
| HDT at 0.45 MPa | 50 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃ | specimen not stated; its document points to a moulded or resin bar, ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 57 ℃p. 1: Glass transition temperature (° C) DSC, 10 ° C/min ℃ | specimen not stated, DSCAs the sheet prints it: ° C DSC | in the median |
| Vicat softening temperature | 56 ℃p. 1: Vicat Softening Temperature(° C) ASTM D1525 (ISO 306 GB/T 1633) ℃ | specimen not stated, ASTM D1525, ISO 306, GB/T 1633 | |
| Density | 1.32 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ | specimen not stated, ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 | |
| Melt mass-flow rate | 20 ± 1.5 g/10minp. 1: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min | specimen not stated, no standard namedAs the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 55–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190℃-220℃; Bed 55-70℃; Drying 50℃-60℃, 6hEryone, Technical Data Sheet (TDS) Hyper Speed Dual Color Silk PLAp. 1: Recommended printing settings; p. 1: Sealed printing; p. 1: Bed material
Price
Not in the price sample.
Its 3 documents
What the maker says (3)
- Benefits
Utilizing a comprehensively improved formula, it offers significantly faster printing speeds compared to standard silky PLA, reaching up to 500 mm/s.
Eryone, Technical Data Sheet (TDS) Hyper Speed Dual Color Silk PLAp. 1 - Surface finish
This high-speed silky PLA material delivers a brighter surface with a silky sheen.
Eryone, Technical Data Sheet (TDS) Hyper Speed Dual Color Silk PLAp. 1 - Surface finish
Brightness can be controlled by adjusting temperature and speed: higher temperatures and lower printing speeds result in higher brightness.
Eryone, Technical Data Sheet (TDS) Hyper Speed Dual Color Silk PLAp. 1
Eryone Hyper Speed Triple Color Silk PLAStrength XY, MPa62.7Strength Z, MPa19.1Modulus XY, GPa1.93Charpy notched, kJ/m²—HDT 0.45, °C50HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C55–70Chamber, °CnoneDrying, °C, h50–606 h
Eryone Hyper Speed Triple Color Silk PLAEryone
Data sheet shared with Eryone Hyper Speed Dual Color Silk PLA: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 55–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190℃-220℃; Bed 55-70℃; Drying 50℃-60℃, 6hEryone, Technical Data Sheet (TDS) Hyper Speed Triple Color Silk PLAp. 1: Nozzle temperature, Bed temperature, Sealed printing; p. 1: Bed material
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
Utilizing a comprehensively improved formula, it offers significantly faster printing speeds compared to standard silky PLA, reaching up to 500 mm/s.
Eryone, Technical Data Sheet (TDS) Hyper Speed Triple Color Silk PLAp. 1 - Surface finish
This high-speed silky PLA material delivers a brighter surface with a silky sheen.
Eryone, Technical Data Sheet (TDS) Hyper Speed Triple Color Silk PLAp. 1 - Surface finish
Brightness can be controlled by adjusting temperature and speed: higher temperatures and lower printing speeds result in greater brightness.
Eryone, Technical Data Sheet (TDS) Hyper Speed Triple Color Silk PLAp. 1
Eryone Silk PLAStrength XY, MPa55.2Strength Z, MPa12.1Modulus XY, GPa1.22Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg29Nozzle, °C190–220Bed, °C55–70Chamber, °CnoneDrying, °C, h50–606 h
Eryone Silk PLAEryone
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Eryone, Technical Data Sheet (TDS) Silk PLA14 values | |||
| Tensile modulus XY | 1215.4 MPap. 2: Tensile modulus X-Y 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=220 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile modulus Z (X-Z) | 1051.9 MPap. 2: Tensile modulus X-Z 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=220 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) XY | 55.2 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=220 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) Z (X-Z) | 12.1 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPa | GB/T 1843As the sheet prints it: 50mm/min GB/T 1843print settingsprinting temperature=220 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Elongation at break XY | 1.7 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=220 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Elongation at break Z | 1.2 %p. 2: Elongation at breakX-Z 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=220 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural modulus orientation not stated | 3006.8 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=220 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural strength orientation not stated | 83 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=220 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Charpy impact strength | 2.83 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1043.1-2008 kJ/m2 | GB/T 1043.1As the sheet prints it: 2.75J GB/T 1043.1-2008print settingsprinting temperature=220 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | not in the median: notch not stated |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃ | ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 63 ℃p. 1: Glass transition temperature (° C) DSC, 10 ° C/min ℃ | DSCAs the sheet prints it: ° C DSC | in the median |
| Vicat softening temperature | 56 ℃p. 1: Vicat Softening Temperature(° C) ASTM D1525 (ISO 306 GB/T 1633) ℃ | ASTM D1525, ISO 306, GB/T 1633 | |
| Density | 1.32 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ | ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 | |
| Melt mass-flow rate | 20.5 ± 1.5 g/10minp. 1: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min | no standard namedAs the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 55–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190-220 ℃; Bed 55-70℃; Drying 50-60℃, 6hEryone, Technical Data Sheet (TDS) Silk PLAp. 1: Recommended printing settings; p. 1: Bed temperature; p. 1: Sealed printing; p. 1: Bed material
Price
29 CAD/kgits one regular price in the sample
1 listing
- ERYONE Canada: 29 CAD/kgPLA Silk Filament - 1.75mm±0.03mm (1kg) / PLA Silk-Black (SKU B0102497)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (5)
- Good for
Compatible with 99% of 3D printing equipment on the market, it's the ideal choice for creating exquisite artworks, creative decorative pieces, or intricately detailed character models.
Eryone, Technical Data Sheet (TDS) Silk PLAp. 1 - Benefits
This lint offers excellent printability, producing even, uniform, and smooth filament output without clogging.
Eryone, Technical Data Sheet (TDS) Silk PLAp. 1 - Surface finish
ERYONE Silk PLA 3D Printing Lint boasts a satin-like, delicate, and lustrous metallic sheen.
Eryone, Technical Data Sheet (TDS) Silk PLAp. 1 - Surface finish
Its smooth, refined surface effectively conceals print textures, resulting in a seamless, glossy finish.
Eryone, Technical Data Sheet (TDS) Silk PLAp. 1 - Printing advice
Sealed printing supports open printing, and the sealing effect is better if it is sealed
Eryone, Technical Data Sheet (TDS) Silk PLAp. 1
Eryone Silk PLA Dual-ColorStrength XY, MPa49.8Strength Z, MPa11Modulus XY, GPa1.72Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C55–70Chamber, °CnoneDrying, °C, h50–606 h
Eryone Silk PLA Dual-ColorEryone
Data sheet shared with Eryone Silk Rainbow PLA and Eryone Silk PLA Tri-Color: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 55–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190-220 ℃; Bed 55-70℃; Drying 50-60℃, 6hEryone, Technical Data Sheet (TDS) Silk PLA Dual-Colorp. 1: Nozzle temperature, Bed temperature, Sealed printing; p. 1: Bed material
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Surface finish
The printed model surface can present a dazzling and silky texture
Eryone, Technical Data Sheet (TDS) Silk PLA Dual-Colorp. 1 - Printing advice
Sealed printing supports open printing, and the sealing effect is better if it is sealed
Eryone, Technical Data Sheet (TDS) Silk PLA Dual-Colorp. 1
Eryone Silk PLA Tri-ColorStrength XY, MPa49.8Strength Z, MPa11Modulus XY, GPa1.72Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C55–70Chamber, °CnoneDrying, °C, h50–606 h
Eryone Silk PLA Tri-ColorEryone
Data sheet shared with Eryone Silk Rainbow PLA and Eryone Silk PLA Dual-Color: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 55–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190-220 ℃; Bed 55-70℃; Drying 50-60℃, 6hEryone, Technical Data Sheet (TDS) Silk PLA Tri-Colorp. 1: Nozzle temperature, Bed temperature, Sealed printing; p. 1: Bed material
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Surface finish
The printed model surface can present a dazzling and silky texture
Eryone, Technical Data Sheet (TDS) Silk PLA Tri-Colorp. 1 - Printing advice
Sealed printing supports open printing, and the sealing effect is better if it is sealed
Eryone, Technical Data Sheet (TDS) Silk PLA Tri-Colorp. 1
Eryone Silk Rainbow PLAStrength XY, MPa49.8Strength Z, MPa11Modulus XY, GPa1.72Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg48Nozzle, °C190–220Bed, °C55–70Chamber, °CnoneDrying, °C, h50–606 h
Eryone Silk Rainbow PLAEryone
Data sheet shared with Eryone Silk PLA Tri-Color and Eryone Silk PLA Dual-Color: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Eryone, Technical Data Sheet (TDS) Silk Rainbow PLA14 valuesThe same values also in Eryone, Technical Data Sheet (TDS) Silk PLA Dual-Color and Eryone, Technical Data Sheet (TDS) Silk PLA Tri-Color. | |||
| Tensile modulus XY | 1724.9 MPap. 2: Tensile modulus X-Y 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile modulus Z (X-Z) | 1653.5 MPap. 2: Tensile modulus X-Z 50mm/min GB/T 1040.1-2006 MPaalso in Eryone, Technical Data Sheet (TDS) Silk PLA Dual-Color | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) XY | 49.8 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) Z (X-Z) | 11 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPaalso in Eryone, Technical Data Sheet (TDS) Silk PLA Dual-Color | GB/T 1843As the sheet prints it: 50mm/min GB/T 1843print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Elongation at break XY | 1.7 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Elongation at break Z | 1.1 %p. 2: Elongation at breakX-Z 50mm/min GB/T 1040.4 %also in Eryone, Technical Data Sheet (TDS) Silk PLA Dual-Color | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural modulus orientation not stated | 2315.5 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural strength orientation not stated | 66.7 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Charpy impact strength | 7.5 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1043.1-2008 kJ/m2 | GB/T 1043.1As the sheet prints it: 2.75J GB/T 1043.1-2008print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | not in the median: notch not stated |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃ | ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 63 ℃p. 1: Glass transition temperature (° C) DSC, 10 ° C/min ℃ | DSCAs the sheet prints it: ° C DSC | in the median |
| Vicat softening temperature | 56 ℃p. 1: Vicat Softening Temperature(° C) ASTM D1525 (ISO 306 GB/T 1633) ℃ | ASTM D1525, ISO 306, GB/T 1633 | |
| Density | 1.32 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ | ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 | |
| Melt mass-flow rate | 20.5 ± 1.5 g/10minp. 1: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10minalso in Eryone, Technical Data Sheet (TDS) Silk PLA Tri-Color | no standard namedAs the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg | |
| Eryone, Technical Data Sheet (TDS) Silk PLA Tri-Color1 value | |||
| Tensile strength (yield or break not stated) Z (X-Z) | 12 MPap. 2: Tensile strength X-Z | GB/T 1843As the sheet prints it: GB/T 1843; rate=50mm/min | not in the median: another value of this product is in it |
| Eryone, Technical Data Sheet (TDS) Silk PLA Dual-Color1 value | |||
| Charpy impact strength orientation not stated | 7.5 kJ/m2p. 2: Charpy Impact strenght | GB/T 1043.1As the sheet prints it: GB/T 1043.1-2008; energy=2.75J | not in the median: notch not stated |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 55–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190-220 ℃; Bed 55-70℃; Drying 50-60℃, 6hEryone, Technical Data Sheet (TDS) Silk Rainbow PLAp. 1: Recommended printing settings; p. 1: Drying conditions; p. 1: Nozzle temperature; p. 1: Bed temperature; p. 1: Sealed printing; p. 1: Bed material
Price
48 CAD/kgits one regular price in the sample
1 listing
- ERYONE Canada: 48 CAD/kgPLA Rainbow Silk Filament - 1.75mm±0.03mm (1kg) / PLA Rainbow Silk-Steampunk (SKU B0103062)in its price; seen 30 Sep 2026
Its 4 documents
What the maker says (2)
- Surface finish
The surface effect is very bright and smooth
Eryone, Technical Data Sheet (TDS) Silk Rainbow PLAp. 1 - Printing advice
Sealed printing supports open printing, and the sealing effect is better if it is sealed
Eryone, Technical Data Sheet (TDS) Silk Rainbow PLAp. 1
eSUN PLA-SilkStrength XY, MPa32.5Strength Z, MPa17.4Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C50HDT 1.8, °C—Price, CAD/kg29Nozzle, °C190–230Bed, °C45–60Chamber, °C—Drying, °C, h50≥ 8 h
eSUN PLA-SilkeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
eSUN, PLA-Silk Technical Data Sheet13 valuesThe same values also in eSUN, eSilk-PLA Technical Data Sheet.Unless a row says otherwise: printed specimenprint settingseSUN printing test conditions (p. 3): Bambu P1S, 0.4 mm nozzle, OrcaSlicer 2.1.0 Beta; extruder 220 °C; build platform 60 °C; 2 outer layers; 3 top/bottom layers; 100% infill; fan 100% | |||
| Tensile strength (yield or break not stated) XY | 32.53 Mpap. 2: Tensile Strength (X-Y) | GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 17.36 MPap. 2: Tensile Strength (Z) | GB/T 1040 | in the median |
| Elongation at break XY | 11.65 %p. 2: Elongation at Break (X-Y) | GB/T 1040 | in the median |
| Elongation at break Z | 1.84 %p. 2: Elongation at Break (Z) | GB/T 1040 | in the median |
| Flexural modulus XY | 1917.35 MPap. 2: Flexural Modulus (X-Y) | GB/T 9341 | in the median |
| Flexural modulus Z | 1858.86 Mpap. 2: Flexural Modulus (Z) | GB/T 9341 | in the median |
| Flexural strength XY | 44.4 MPap. 2: Flexural Strength (X-Y) | GB/T 9341 | in the median |
| Flexural strength Z | 23.1 Mpap. 2: Flexural Strength (Z) | GB/T 9341 | in the median |
| Izod impact strength XY | 2.93 KJ/m²p. 2: IZOD Impact Strength (X-Y) | GB/T 1843 | not in the median: notch not stated |
| Izod impact strength Z | 2.19 KJ/m²p. 2: IZOD Impact Strength (Z) | GB/T 1843 | not in the median: notch not stated |
| HDT at 0.45 MPa | 50 ℃ (0.45Mpa) °Cp. 1: Heat Distortion Temperature | GB/T 1634As the sheet prints it: GB/T 1634, 0.45 MPa | in the median |
| Density | 1.21 g/cm3p. 1: Densityalso in eSUN, eSilk-PLA Technical Data Sheet | specimen not stated, GB/T 1033print settings not stated | |
| Melt mass-flow rate | 4.8 (190 ℃/2.16 kg) g/10 min (unit not printed)p. 1: Melt Flow Index | specimen not stated, GB/T 3682As the sheet prints it: GB/T 3682 (190 °C, 2.16 kg) | |
| eSUN, eSilk-PLA Technical Data Sheet6 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 52 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 14.4 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 1447 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 65 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 5.86 kJ/m2p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT | 50 ℃p. 1: Heat distortion Temperature | GB/T 1634 | not in the median: measured on a moulded bar |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 50 °C for ≥ 8 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 190-230℃; Bed 45-60°CeSUN, eSilk-PLA Technical Data Sheetp. 2: Recommended printing settings
- Nozzle 190-230℃; Bed 45-60℃; Drying 50℃ >8HeSUN, PLA-Silk Technical Data Sheetp. 2: Build Platform Temperature, Drying Preparation, Nozzle Temperature; p. 2: Build Platform Type
Price
28.8 CAD/kgthe median of its 2 regular prices in the sample
2 listings
- Shop3D.ca: 32.5 CAD/kgeSUN PLA-Silk Filament - 1.75mm - 1kg / Red (SKU eSilk-PLA175R1)in its price; seen 30 Sep 2026
- DigitMakers: 25 CAD/kgeSun eSilk PLA Refill 1.75mm 1kg - Various Colors / Black (SKU ESUN-RFL-ESILK-PLA-1.75-1KG-BLCK)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (8)
- Good for
Toys
eSUN, eSilk-PLA Technical Data Sheetp. 1 - Benefits
Easy to print as PLA
eSUN, eSilk-PLA Technical Data Sheetp. 1 - Benefits
High toughness.
eSUN, eSilk-PLA Technical Data Sheetp. 1 - Surface finish
Smooth surface
eSUN, eSilk-PLA Technical Data Sheetp. 1 - Surface finish
The model has shinny and silk luster texture, The printing surface is smooth without layer patterns.
eSUN, eSilk-PLA Technical Data Sheetp. 1 - Benefits
Easy to print as PLA
eSUN, PLA-Silk Technical Data Sheetp. 1 - Surface finish
The model has a silky luster and texture, with a smooth surface that does not show layering patterns.
eSUN, PLA-Silk Technical Data Sheetp. 1 - Supports and removal
Com pared with other materials, the support is easier to peel off from the model surface, and the contact surfac e is smooth and flat.
eSUN, PLA-Silk Technical Data Sheetp. 1
Anycubic PLA SilkStrength XY, MPa37Strength Z, MPa12Modulus XY, GPa2Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–240Bed, °C55–65Chamber, °C—Drying, °C, h55–656–8 h
Anycubic PLA SilkAnycubic
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Anycubic, Anycubic PLA Silk15 values | |||
| Tensile modulus XY | 2000±200 MPap. 1: Young's Modulus / MPa (X-Y) | ISO 527 | in the median |
| Tensile strength (yield or break not stated) XY | 37±4 MPap. 1: Tensile Strength / MPa (X-Y) | ISO 527 | in the median |
| Tensile strength (yield or break not stated) Z | 12±4 MPap. 1: Tensile Strength / MPa (Z) | ISO 527 | in the median |
| Elongation at break XY | 28±5 %p. 1: Elongation at Break / % (X-Y) | ISO 527 | in the median |
| Flexural modulus XY | 2400±160 MPap. 1: Bending Modulus / MPa (X-Y) | ISO 178 | in the median |
| Flexural strength XY | 66±4 MPap. 1: Bending Strength / MPa (X-Y) | ISO 178 | in the median |
| Izod impact strength XY | 20±2 kJ/m²p. 1: Izod Impact Strength (kJ/m²) (X-Y) | ISO 179 | not in the median: notch not stated |
| HDT at 0.45 MPa | 53 ℃p. 2: Heat Deflection Temperature (HDT) ISO 75-2, 0.45MPa ℃ | ISO 75As the sheet prints it: 0.45MPa ISO 75-2 | in the median |
| Glass transition temperature | 55.6 ℃p. 2: Glass Transition Temperature ISO 11357-1, 10℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-1 | in the median |
| Vicat softening temperature | 54 ℃p. 2: Vicat Softening Temperature (VST) ISO 306, 10N ℃ | ISO 306As the sheet prints it: VST 10N ISO 306 | |
| Melting temperature | 164 ℃p. 2: Melting Temperature ISO 11357-1, 10℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-1 | |
| Crystallization temperature | 102 ℃p. 2: Crystallization Temperature ISO 11357-1, 10℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-1 | |
| Density | 1.22 g/cm3p. 1: Density/(g/cm³) ISO 1183,at 23°C g/cm3 | ISO 1183As the sheet prints it: at 23°C ISO 1183 | |
| Moisture content | 0.28 %p. 1: Moisture Content ISO 787-2 % | ISO 787As the sheet prints it: ISO 787-2 | |
| Melt mass-flow rate | 9 ± 1 g/10minp. 1: Melt Index/ ( g/10min) ISO 1133 g/10min | ISO 1133As the sheet prints it: g/10min ISO 1133 | |
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 55–65 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 55–65 °C for 6–8 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210-240; Bed 55-65; Drying 55-65℃,6-8hAnycubic, Anycubic PLA Silkp. 2: Recommended printing settings; p. 2: Dry Environment; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Based on a 0.4mm nozzle
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Surface finish
Anycubic PLA Silk is a durable and reflective aesthetic filament that creates models with a silky luster.
Anycubic, Anycubic PLA Silkp. 1 - Surface finish
The luster can be fine-tuned by adjusting the printer's temperature settings.
Anycubic, Anycubic PLA Silkp. 1
SUNLU PLA+ (Silk PLA+)Strength XY, MPa50Strength Z, MPa—Modulus XY, GPa2.76Charpy notched, kJ/m²3.5IzodHDT 0.45, °C57HDT 1.8, °C—Price, CAD/kg—Nozzle, °C205–215Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU PLA+ (Silk PLA+)SUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, Product Information PLA+ (Silk PLA+)14 values | |||
| Tensile modulus orientation not stated | 2760 MPap. 1: Young’s Modulus ASTM D638 1mm/min MPa | ASTM D638As the sheet prints it: 1mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 60.6 MPap. 1: Tensile Strength ASTM D638 50mm/min MPa | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 6.3 %p. 1: Elongation at break ASTM D638 50mm/min % | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: another value of this product is in it |
| Flexural modulus orientation not stated | 1895 MPap. 1: Flexural Modulus ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: another value of this product is in it |
| Flexural strength orientation not stated | 65 MPap. 1: Flexural Strength ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: another value of this product is in it |
| Izod impact strength | 33 J/mp. 1: IZOD Impact Notched ASTM D256 3.2mm, 23℃ J/m | ASTM D256As the sheet prints it: 3.2mm 23℃ ASTM D256 | not in the median: in J/m |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat Deflection (HDT) ASTM D648 0.45MPa ℃ | ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: another value of this product is in it |
| Glass transition temperature | 60.9 ℃p. 1: Glass Transition(Tg) ASTM D7426 10℃/min ℃ | ASTM D7426 | in the median |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temp. ASTM D1525 5kg,50℃/h ℃ | ASTM D1525As the sheet prints it: 5kg ASTM D1525 | |
| Melting temperature | 164 ℃p. 1: Melting Point ASTM D7426 10℃/min ℃ | ASTM D7426 | |
| Decomposition temperature | 364 ℃p. 1: @5%Decomposition Temp. ASTM E2402 20℃/min ℃ | ASTM E2402As the sheet prints it: E2402 | |
| Density | 1.25 g/cm3p. 1: Density ASTM D792 23℃ g/cm3 | ASTM D792As the sheet prints it: 23℃ ASTM D792 | |
| Melt mass-flow rate | 9.0 g/10minp. 1: Melt Flow Rate ASTM D1238 190℃/2.16kg g/10min | ASTM D1238As the sheet prints it: 190℃/2.16kg ASTM D1238 | |
| Mould shrinkage orientation not stated | 0.1-0.3 %p. 1: Mold Shrinkage ASTM D955 23℃ % | ASTM D955As the sheet prints it: 23℃ ASTM D955 | |
| SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+9 valuesUnless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile strength (yield or break not stated) XY | 50±4 MPap. 1: (X-Y) Tensile Strength | ISO 527As the sheet prints it: ISO 527/2; rate=50 mm/min | in the median |
| Elongation at break XY | 11±3 %p. 1: (X-Y) Elongation at break | ISO 527As the sheet prints it: ISO 527/2; rate=50 mm/min | in the median |
| Flexural modulus XY | 2600±300 MPap. 1: (X-Y) Flexural Modulus | ISO 178As the sheet prints it: ISO 178; rate=2 mm/min | in the median |
| Flexural strength XY | 78±5 MPap. 1: (X-Y) Flexural Strength | ISO 178As the sheet prints it: ISO 178; rate=2 mm/min | in the median |
| Izod impact strength XY | 3.5±1.5 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched Specimen | ISO 180tested at 23 °C | in the median |
| Izod impact strength ZX | 4±1.5 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched Specimen | ISO 180tested at 23 °C | not in the median: unnotched |
| HDT XY, at 0.45 MPa | 57±3 ℃p. 1: (X-Y) Heat Distortion (HDT) | printed specimen (implied by the document), ISO 75As the sheet prints it: ISO 75; 0.45 MPa | in the median |
| Density | 1.23 g/cm3p. 1: Density | specimen not stated, ISO 1183tested at 23 ℃ | |
| Melt mass-flow rate | 7±2.5 g/10 minp. 1: Melt Mass-flow Rate | specimen not stated, ISO 1133As the sheet prints it: ISO 1133; 2.16 kg | |
Print settings
- Nozzle
- 205–215 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not stated
Its 3 print profiles, in the documents' words
- Nozzle 205-215℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information PLA+ (Silk PLA+)p. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Print Platform Temp.; p. 2: Room Temp.; p. 2: Print Platform Material
- Nozzle 210-230; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+p. 2: Nozzle Temp., Plate Temp.; p. 2: Plate Material
- Nozzle 215-235℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information PLA+ (Silk PLA+)p. 2: Recommended Printing Parameters: Zonal Temperature, 100-200mm/s; p. 2: Print Platform Material
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Surface finish
Smooth silky surface and glossy bright colors
SUNLU, Product Information PLA+ (Silk PLA+)p. 1 - Supports and removal
Support Material PVA
SUNLU, Product Information PLA+ (Silk PLA+)p. 2 - Surface finish
A silky-smooth surface with vibrant, glossy colors
SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+p. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+p. 2
SUNLU PLA+ Silk 2.0Strength XY, MPa51Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²4.29IzodHDT 0.45, °C57HDT 1.8, °C—Price, CAD/kg—Nozzle, °C205–235Bed, °C50–60Chamber, °CnoneDrying, °C, h55
SUNLU PLA+ Silk 2.0SUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, 三绿耗材物性表 ISO PLA+丝绸 2.0 (PLA+ Silk 2.0)22 values | |||
| Tensile modulus XY | 597 ± 50 MPaphysically implausiblep. 1: 拉伸模量(X-Y) Tensile Modulus ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settings测试样条打印速度 90 mm/s，打印温度 220 ℃。填充 100%，走线方式为 90 度。 | not in the median: physically implausible as published |
| Tensile modulus ZX | 363 ± 30 MPaphysically implausiblep. 1: 拉伸模量(Z-X) Tensile Modulus ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settings测试样条打印速度 90 mm/s，打印温度 220 ℃。填充 100%，走线方式为 90 度。 | not in the median: physically implausible as published |
| Tensile strength (yield or break not stated) XY | 51 ± 4 MPap. 1: 拉伸强度(X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settings测试样条打印速度 90 mm/s，打印温度 220 ℃。填充 100%，走线方式为 90 度。 | in the median |
| Tensile strength (yield or break not stated) ZX | 18 ± 3 MPap. 1: 拉伸强度(Z-X) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settings测试样条打印速度 90 mm/s，打印温度 220 ℃。填充 100%，走线方式为 90 度。 | not in the median: measured on a bar in another orientation |
| Elongation at break XY | 11 ± 3 %p. 1: 断裂伸长率(X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settings测试样条打印速度 90 mm/s，打印温度 220 ℃。填充 100%，走线方式为 90 度。 | in the median |
| Elongation at break ZX | 5 ± 1.5 %p. 1: 断裂伸长率(Z-X) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settings测试样条打印速度 90 mm/s，打印温度 220 ℃。填充 100%，走线方式为 90 度。 | not in the median: measured on a bar in another orientation |
| Flexural modulus XY | 2473 ± 300 MPap. 1: 弯曲模量(X-Y) Flexural Modulus ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settings测试样条打印速度 90 mm/s，打印温度 220 ℃。填充 100%，走线方式为 90 度。 | in the median |
| Flexural modulus ZX | 1719 ± 200 MPap. 1: 弯曲模量(Z-X) Flexural Modulus ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settings测试样条打印速度 90 mm/s，打印温度 220 ℃。填充 100%，走线方式为 90 度。 | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 77 ± 5 MPap. 1: 弯曲强度(X-Y) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settings测试样条打印速度 90 mm/s，打印温度 220 ℃。填充 100%，走线方式为 90 度。 | in the median |
| Flexural strength ZX | 27 ± 3 MPap. 1: 弯曲强度(Z-X) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settings测试样条打印速度 90 mm/s，打印温度 220 ℃。填充 100%，走线方式为 90 度。 | not in the median: measured on a bar in another orientation |
| Izod impact strength XY | 15.5 ± 1.5 KJ/m2p. 1: 悬臂梁无缺口冲击强度(X-Y) Izod Impact ISO 180 23℃ KJ/m2 Strength of Unnotched Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Strength of Specimen ISO 180print settings测试样条打印速度 90 mm/s，打印温度 220 ℃。填充 100%，走线方式为 90 度。 | not in the median: unnotched |
| Izod impact strength XY | 4.29 ± 1.5 KJ/m2p. 1: 悬 臂 梁 缺 口 冲 击 强 度 (X-Y) Izod Impact ISO 180 23℃ KJ/m2 Strength of Notched Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Strength of Specimen ISO 180print settings测试样条打印速度 90 mm/s，打印温度 220 ℃。填充 100%，走线方式为 90 度。 | in the median |
| Izod impact strength ZX | 6.5 ± 1.5 KJ/m2p. 1: 悬臂梁无缺口冲击强度(Z-X) Izod Impact ISO 180 23℃ KJ/m2 Strength of Unnotched Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Strength of Specimen ISO 180print settings测试样条打印速度 90 mm/s，打印温度 220 ℃。填充 100%，走线方式为 90 度。 | not in the median: unnotched |
| Hardness | 82.5 Shore (scale not specified by source)p. 1: 邵氏硬度 Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | |
| HDT XY, at 0.45 MPa | 57 ± 3 ℃p. 1: 热变形温度(X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | in the median |
| Glass transition temperature | 60.9 ℃p. 1: 玻璃化转变温度 Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-2 | in the median |
| Vicat softening temperature | 54 ℃p. 1: 维卡软化温度 Vicat Softening Temp. ISO 306 5kg, 50℃/h ℃ | ISO 306As the sheet prints it: 5kg ISO 306 | |
| Melting temperature | 164 ℃p. 1: 熔点温度 Melting Temperature ISO 11357-3 10 ℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Decomposition temperature | ≥364 ℃p. 1: 分解温度@5%Decomposition Temp. | ISO 11358As the sheet prints it: ISO 11358; mass loss=5%; rate=20 ℃/min | |
| Density | 1.25 g/cm3p. 1: 密度 Density ISO 1183 23℃ g/cm3 | ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 4 ± 2 g/10 minp. 1: 熔体指数(线材) Melt Mass-flow Rate ISO 1133 190℃/2.16 kg g/10 min | ISO 1133As the sheet prints it: 190℃/2.16 kg ISO 1133 | |
| Mould shrinkage orientation not stated | 0.1-0.3 %p. 1: 收缩率 Moulding Shrinkage | ISO 294tested at 23 ℃ | |
Print settings
- Nozzle
- 205–235 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 55 °Cown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 205-215°C; 215-235°C; Bed 50-60℃; Chamber 常温; Drying 55℃SUNLU, 三绿耗材物性表 ISO PLA+丝绸 2.0 (PLA+ Silk 2.0)p. 2: Drying Temp.; p. 2: 喷嘴温度 Nozzle Temp.; p. 2: 平台温度 Plate Temp.; p. 2: 平台材料 Plate Material
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Supports and removal
Supported Material PVA
SUNLU, 三绿耗材物性表 ISO PLA+丝绸 2.0 (PLA+ Silk 2.0)p. 2
SUNLU Silk PLA+ Dual-ColorStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²3.5IzodHDT 0.45, °C57HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU Silk PLA+ Dual-ColorSUNLU
Data sheet shared with SUNLU Silk PLA+ Four-Color, SUNLU Silk PLA+ Rainbow and SUNLU Silk PLA+ Tri-Color: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210-230; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+ Dual-Colorp. 2: Nozzle Temp., Plate Temp.; p. 2: Plate Material
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Surface finish
Silky-smooth surface with vibrant, glossy colors, producing models with two colors on different surfaces after printing.
SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+ Dual-Colorp. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+ Dual-Colorp. 2
SUNLU Silk PLA+ Four-ColorStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²3.5IzodHDT 0.45, °C57HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU Silk PLA+ Four-ColorSUNLU
Data sheet shared with SUNLU Silk PLA+ Dual-Color, SUNLU Silk PLA+ Rainbow and SUNLU Silk PLA+ Tri-Color: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+ Four-Color13 valuesThe same values also in SUNLU, Silk PLA+ Four-Color.Unless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 50 ± 4 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 90 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Elongation at break XY | 11 ± 3 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 90 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural modulus XY | 2600 ± 300 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 90 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural strength XY | 78 ± 5 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 90 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength XY | 3.5 ± 1.5 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 90 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength ZX | 4 ± 1.5 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 90 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | not in the median: unnotched |
| Hardness | 79.6 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | |
| HDT XY, at 0.45 MPa | 57 ± 3 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | in the median |
| Glass transition temperature | 60.9 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃also in SUNLU, Silk PLA+ Four-Color | ISO 11357As the sheet prints it: ISO 11357-2 | in the median |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temp. ISO 306 5kg, 50℃/h ℃also in SUNLU, Silk PLA+ Four-Color | ISO 306As the sheet prints it: 5kg ISO 306 | |
| Melting temperature | 164 ℃p. 1: Melting Temperature ISO 11357-3 10 ℃/min ℃also in SUNLU, Silk PLA+ Four-Color | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Density | 1.23 g/cm3p. 1: Density ISO 1183 23℃ g/cm3 | specimen not stated, ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 7 ± 2.5 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 190℃/2.16 kg g/10 min | ISO 1133As the sheet prints it: 190℃/2.16 kg ISO 1133 | |
| SUNLU, Silk PLA+ Four-Color10 values | |||
| Tensile strength (yield or break not stated) XY | 47.7 MPap. 1: Tensile Strength(X-Y) ISO527/2 50mm/min MPa | ISO 527As the sheet prints it: 50mm/min ISO527/2 | not in the median: another value of this product is in it |
| Elongation at break XY | 11.4 %p. 1: Elongation at break(X-Y) ISO527/2 50mm/min % | ISO 527As the sheet prints it: 50mm/min ISO527/2 | not in the median: another value of this product is in it |
| Flexural modulus XY | 2745 MPap. 1: Flexural Modulus(X-Y) ISO178 2mm/min MPa | ISO 178As the sheet prints it: 2mm/min ISO178 | not in the median: another value of this product is in it |
| Flexural strength XY | 80.7 MPap. 1: Flexural Strength(X-Y) ISO178 2mm/min MPa | ISO 178As the sheet prints it: 2mm/min ISO178 | not in the median: another value of this product is in it |
| Izod impact strength XY | 3.3 KJ/m2p. 1: IZOD Impact Notched(X-Y) ISO180 23℃ KJ/m2 | ISO 180As the sheet prints it: 23℃ ISO180 | not in the median: another value of this product is in it |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat Deflection (HDT) ISO75 0.45MPa ℃ | ISO 75As the sheet prints it: 0.45MPa ISO75 | not in the median: another value of this product is in it |
| Decomposition temperature | 364 ℃p. 1: @5%Decomposition Temp. ISO11358 20℃/min ℃ | ISO 11358 | |
| Density | 1.25 g/cm3p. 1: Density ISO1183 23℃ g/cm3 | ISO 1183As the sheet prints it: 23℃ ISO1183 | |
| Melt mass-flow rate | 9.0 g/10minp. 1: Melt Flow Rate ISO1133 190℃/2.16kg g/10min | ISO 1133As the sheet prints it: 190℃/2.16kg ISO1133 | |
| Mould shrinkage orientation not stated | 0.1-0.3 %p. 1: Mold Shrinkage ISO294 23℃ % | ISO 294As the sheet prints it: 23℃ ISO294 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 210-230; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+ Four-Colorp. 2: Recommended printing settings; p. 2: Nozzle Temp.
- Nozzle 205-215; 215-230; Bed 50-70℃; Chamber Normal temperature; Drying 50℃SUNLU, Silk PLA+ Four-Colorp. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Print Platform Material
Price
Not in the price sample.
Its 3 documents
What the maker says (5)
- Surface finish
Silky-smooth surface with vibrant, glossy colors, producing models with four colors on different surfaces after printing.
SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+ Four-Colorp. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+ Four-Colorp. 2 - Good for
Ornaments, toys, ornaments, handcrafts
SUNLU, Silk PLA+ Four-Colorp. 1 - Surface finish
Silk glossy surface and four colors on different sides.
SUNLU, Silk PLA+ Four-Colorp. 1 - Supports and removal
Support Material PVA
SUNLU, Silk PLA+ Four-Colorp. 2
SUNLU Silk PLA+ RainbowStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²3.5IzodHDT 0.45, °C57HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU Silk PLA+ RainbowSUNLU
Data sheet shared with SUNLU Silk PLA+ Four-Color, SUNLU Silk PLA+ Dual-Color and SUNLU Silk PLA+ Tri-Color: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210-230; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+ Rainbowp. 2: Nozzle Temp., Plate Temp.; p. 2: Plate Material
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Surface finish
A silky-smooth surface with bright, glossy colors.
SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+ Rainbowp. 1 - Surface finish
The printed models feature rainbow-like gradient color transitions on the surface.
SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+ Rainbowp. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+ Rainbowp. 2
SUNLU Silk PLA+ Tri-ColorStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²3.5IzodHDT 0.45, °C57HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU Silk PLA+ Tri-ColorSUNLU
Data sheet shared with SUNLU Silk PLA+ Four-Color, SUNLU Silk PLA+ Dual-Color and SUNLU Silk PLA+ Rainbow: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210-230; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+ Tri-Colorp. 2: Nozzle Temp., Plate Temp.; p. 2: Plate Material
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Surface finish
Silky-smooth surface with vibrant, glossy colors, producing models with three colors on different surfaces after printing.
SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+ Tri-Colorp. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO Silk PLA+ Tri-Colorp. 2
Spectrum PLA Magic SILKStrength XY, MPa59Strength Z, MPa—Modulus XY, GPa2.7Charpy notched, kJ/m²—HDT 0.45, °C50HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–240Bed, °C40–60Chamber, °CnoneDrying, °C, hdry first
Spectrum PLA Magic SILKSpectrum
Data sheet shared with Spectrum PLA SILK and Spectrum PLA SILK Rainbow: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET PLA Magic SILK11 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2700 MPap. 1: Tensile Modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 59 MPap. 1: Tensile Strength at Yield | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 45 MPap. 1: Tensile Strength at Break | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 10,00 %p. 1: Elongation at Break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 5,00 %p. 1: Elongation at Yield | ISO 527 | listed under other properties |
| Flexural strength orientation not stated | 72 MPap. 1: Flexural Strength | ASTM D790As the sheet prints it: D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 6 J/mp. 1: Notched Izod Impact Strength | ASTM D256As the sheet prints it: D 256 | not in the median: in J/m |
| HDT | 50 °Cp. 1: Heat Distortion Temperature | ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 57 °Cp. 1: Glass Transition Temperature | no standard stated | in the median |
| Density | 1.22 g/cm3p. 1: Specific Gravity | ASTM D792As the sheet prints it: D 792 | |
| Melt mass-flow rate | 6 g/10minp. 1: MFR (210°C, 2.16kg) | ASTM D1238As the sheet prints it: 210°C 2.16kg D 1238 | |
| Spectrum, TECHNICAL DATA SHEET PLA SILK1 value | |||
| Izod impact strength orientation not stated | 6 J/mp. 1: Notched Izod Impact Strength | ASTM D256As the sheet prints it: D 256 | not in the median: in J/m |
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 40–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- required, schedule not statedown data sheet
- Hardened nozzle
- not neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 210-240°C; Bed 40-60°CSpectrum, TECHNICAL DATA SHEET PLA Magic SILKp. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: settings footnote
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
- Nozzle 210–240 °C; Bed 40–60 °C; Drying Drying before use improves surface qualitySpectrum, Material guide - PLA Magic SILK (SpectrumFilaments.com)p. 1: drying; p. 1: Nozzle Temperature; p. 1: Bed Temperature
Price
Not in the price sample.
Its 5 documents
What the maker says (7)
- Surface finish
Spectrum Magic SILK PLA is an innovative 3D filament that, thanks to co-extrusion technology, combines two colors in one strand, creating stun-ning color transitions.
Spectrum, TECHNICAL DATA SHEET PLA Magic SILKp. 1 - Surface finish
Smooth, silky print surface
Spectrum, TECHNICAL DATA SHEET PLA Magic SILKp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET PLA Magic SILKp. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET PLA Magic SILKp. 1 - Benefits
Dual-color transitions; co-extrusion technology; smooth surface; ideal for artistic and decorative prints
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20 - Good for
ideal for artistic and decorative prints
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20 - Surface finish
smooth surface
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20
Spectrum PLA SILKStrength XY, MPa59Strength Z, MPa—Modulus XY, GPa2.7Charpy notched, kJ/m²—HDT 0.45, °C50HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–240Bed, °C40–60Chamber, °CnoneDrying, °C, h554 h
Spectrum PLA SILKSpectrum
Data sheet shared with Spectrum PLA Magic SILK and Spectrum PLA SILK Rainbow: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 40–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 55 °C for 4 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 210-240°C; Bed 40-60°CSpectrum, TECHNICAL DATA SHEET PLA SILKp. 1: Bed temperature, Closed chamber, Nozzle note; p. 1: settings footnote
- Nozzle 210-240 °C; Chamber not necessarySpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Nozzle temp. [°C]; p. 4: Closed chamber for printing; p. 4: Adhesive
- Drying 55°C, 4h; In justified casesSpectrum, Filament drying - Spectrum Filamentsp. 1: Drying time; Drying temperature; Need for drying
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- 3D Printing Canada: 26 per kg, sale priceSapphire Blue - Spectrum Silk PLA Filament - 1.75mm, 1kg (SKU 67bbba037791b)not used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 4 documents
What the maker says (6)
- Benefits
maintenance of all the mechanical strength parameters of the standard PLA
Spectrum, TECHNICAL DATA SHEET PLA SILKp. 1 - Surface finish
The silky surface texture of printed items largely reduces the visibility of layers on the side surface of printed items.
Spectrum, TECHNICAL DATA SHEET PLA SILKp. 1 - Surface finish
silky shine on the entire surface of printed items
Spectrum, TECHNICAL DATA SHEET PLA SILKp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET PLA SILKp. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET PLA SILKp. 1 - Surface finish
Original, phenomenal colors; unique aesthetic properties, user friendly
Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 3
Spectrum PLA SILK RainbowStrength XY, MPa59Strength Z, MPa—Modulus XY, GPa2.7Charpy notched, kJ/m²—HDT 0.45, °C50HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–240Bed, °C40–60Chamber, °CnoneDrying, °C, hdry first
Spectrum PLA SILK RainbowSpectrum
Data sheet shared with Spectrum PLA Magic SILK and Spectrum PLA SILK: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 40–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- required, schedule not statedSpectrum PLA Magic SILK's data sheet, shared
- Hardened nozzle
- not neededown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Spectrum, PLA Silk Rainbow.
Its 2 print profiles, in the documents' words
- Nozzle 215-240°C; Bed 30-60°CSpectrum, PLA Silk Rainbowp. 1: Nozzle temperature [°C]; p. 1: Bed temperature [°C]; p. 1: Enclosure; p. 1: Drybox recommended; p. 1: Ruby or hardened nozzle recommended
- Nozzle 210-240°C; Bed 40-60°CSpectrum, KARTA TECHNICZNA PLA SILK Rainbowp. 1: Temperatura dyszy; p. 1: Temperatura stołu; p. 1: Suszarka do filamentu; p. 1: ustawienia oparto na dyszy o średnicy 0,4 mm
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- 3D Printing Canada: 28 per kg, sale priceFire Red - Spectrum PLA Rainbow SILK Filament - 1.75mm, 1kg (SKU 81017)not used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 3 documents
What the maker says (21)
- Surface finish
Thanks to the unique production technology, this filament offers smooth color changes during printing process.
Spectrum, PLA Silk Rainbowp. 1 - Surface finish
Unbelievable glossy effect with exceptional color variations
Spectrum, PLA Silk Rainbowp. 1 - Surface finish
Spectrum PLA SILK Rainbow is a unique type of 3D printing filament based on PLA SILK using coloring concentrates giving the effect of a satin structure.
Spectrum, PLA Silk Rainbowp. 1 - Surface finish
The most distinctive feature of the PLA Rainbow filament is its color transitions.
Spectrum, PLA Silk Rainbowp. 1 - Surface finish
This effect gives your prints a unique character and aesthetics.
Spectrum, PLA Silk Rainbowp. 1 - Precision and tolerance
Spectrum PLA SILK Rainbow filament is characterized by excellent precision and printing stability.
Spectrum, PLA Silk Rainbowp. 1 - Good for
It is perfect for creating decorative elements, prototypes, models, as well as all types of projects where aesthetics play an important role.
Spectrum, PLA Silk Rainbowp. 1 - Good for
You can use it to print decorative details, jewelry, gadgets or even artistic elements.
Spectrum, PLA Silk Rainbowp. 1 - Benefits
Spectrum PLA SILK Rainbow filament is compatible with most popular 3D printers, which makes it easy to integrate it with your current printing system.
Spectrum, PLA Silk Rainbowp. 1 - Precision and tolerance
Thanks to it, your designs will take on a new dimension, delighting not only with the precision of printing, but also with an extraordinary color effect that will make them stand out from others.
Spectrum, PLA Silk Rainbowp. 1 - Surface finish
unique aesthetic properties
Spectrum, PLA Silk Rainbowp. 1 - Surface finish
regularly varying color along the entire length of the filament
Spectrum, PLA Silk Rainbowp. 1 - Surface finish
reduced visibility of layers on the side surfaces of printed items
Spectrum, PLA Silk Rainbowp. 1 - Surface finish
satin shine on the entire surface of printed items
Spectrum, PLA Silk Rainbowp. 1 - Benefits
maintenance of all the mechanical strength parameters of the standard PLA
Spectrum, PLA Silk Rainbowp. 1 - Benefits
user friendly
Spectrum, PLA Silk Rainbowp. 1 - Warping and shrinkage
no shrinkage after cooling
Spectrum, PLA Silk Rainbowp. 1 - Good for
decorative art
Spectrum, PLA Silk Rainbowp. 1 - Good for
interior design
Spectrum, PLA Silk Rainbowp. 1 - Good for
educational projects
Spectrum, PLA Silk Rainbowp. 1 - Good for
concept and demo prototyping of designed finished and semi-finished products
Spectrum, PLA Silk Rainbowp. 1
SIDDAMENT PLA SilkStrength XY, MPa60.6Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²4.2IzodHDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–220Bed, °C60Chamber, °CnoneDrying, °C, h502–4 h
SIDDAMENT PLA SilkSIDDAMENT
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SIDDAMENT, PLA Silk - Technical Datasheet8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 60.6 MPap. 1: Tensile Strength ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 6.3 %p. 1: Elongation at Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 1895 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 65 MPap. 1: Bending Strength ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 4.2 kJ/m2p. 1: Notched Impact Strength ISO 180 kJ/m2 | ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT | 53 °Cp. 1: Heat Deflection ISO 75 °C | ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm3p. 1: Density ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 0.3 %p. 1: Water Absorption ISO 62 % | ISO 62 | |
Print settings
- Nozzle
- 200–220 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 2–4 hown data sheet
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200-220°C; Bed 60°C; Drying If damp, dry at 50°C for 2-4 hours.SIDDAMENT, PLA Silk - Technical Datasheetp. 1: Drying note; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Printing Platform; p. 2: Nozzle Diameter
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Supports and removal
Supporting Material: Self-supporting, PVA
SIDDAMENT, PLA Silk - Technical Datasheetp. 2
Flashforge SilkStrength XY, MPa45Strength Z, MPa—Modulus XY, GPa1.15Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C25–60Chamber, °C25–40Drying, °C, h—
Flashforge SilkFlashforge
Sold as toughened or impact-modified: "toughened, high-gloss polylactic acid modified material" (Flashforge, Technical Data Sheet Silk Filament, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Flashforge, Technical Data Sheet Silk Filament10 values | |||
| Tensile modulus XY | 1150-1250 Mpap. 1: Modulus of Elasticity(X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 220 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Tensile strength (yield or break not stated) XY | 45-49 Mpap. 1: Tensile Strength(X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 220 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Elongation at break XY | 10.5-12.5 %p. 1: Elongation at Break(X-Y) ISO 527 % | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 220 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Flexural strength XY | 72-75 Mpap. 1: Bending Strength(X-Y) ISO 178 Mpa | ISO 178print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 220 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Izod impact strength XY | 5-6 KJ/m2p. 1: Izod Impact Strength(X-Y) ISO 180 KJ/m2 | ISO 180print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 220 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | not in the median: notch not stated |
| HDT at 0.45 MPa | 53 ℃p. 1: HDT@ 0.455 MPa(66 psi) ISO75 ℃ | ISO 75As the sheet prints it: 0.455 MPa 66 psi ISO75 | in the median |
| Continuous service temperature | 50 ℃p. 1: Continuous Service Temperature IEC 60216 ℃ | IEC 60216 | |
| Density | 1.25-1.26 g/cm³p. 1: Density ISO 1183 g/cm³ | ISO 1183 | |
| Water absorption | 0.3 %p. 1: Water Absorption (23℃/24h) ISO 62 % | ISO 62As the sheet prints it: 23℃/24h ISO 62 | |
| Melt mass-flow rate | 5-10 g/10minp. 1: Melt Flow Rate (MFR) (190℃/2.16Kg) ISO 1133 g/10min | ISO 1133As the sheet prints it: MFR 190℃/2.16Kg ISO 1133 | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- 25–40 °Cown data sheet
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190~220℃ (220℃ recommended); Bed Room temperature~60℃ (40℃ recommended); Chamber Room temperature~40℃Flashforge, Technical Data Sheet Silk Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 2: Build Surface Material; p. 2: Nozzle Diameter (recommended printing settings)
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Benefits
It offers excellent bending strength and rigidity, is easy to print, and outputs a silk-like surface finish, with the ability to be printable on various FFF 3D printers.
Flashforge, Technical Data Sheet Silk Filamentp. 1 - Benefits
High glossiness/Easy to print/High rigidity
Flashforge, Technical Data Sheet Silk Filamentp. 1 - Supports and removal
Support Material Self-supporting, PVA, BVOH
Flashforge, Technical Data Sheet Silk Filamentp. 2 - Benefits
toughened, high-gloss polylactic acid modified material
Flashforge, Technical Data Sheet Silk Filamentp. 1
Yousu Silk PLAStrength XY, MPa40Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C65Price, CAD/kg—Nozzle, °C190–240Bed, °C50Chamber, °C—Drying, °C, h—
Yousu Silk PLAYousu
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Yousu, YOUSU Silk PLA 3D FILMAENT Technical Data Sheet9 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Tensile strength (yield or break not stated) orientation not stated | 40 MPa | ASTM D638As the sheet prints it: 10mm/min D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 5 % | ASTM D638As the sheet prints it: 10mm/min D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 3000 MPap. 1: FlexuralModulus | ASTM D790As the sheet prints it: D790; rate=2mm/min | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 90 MPa | ASTM D790As the sheet prints it: 2mm/min D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 4 KJ/m2 | ASTM D256As the sheet prints it: D256 | not in the median: to another standard |
| HDT at 1.8 MPa | 65 ℃p. 1: Heat Distortion Temp. | ASTM D648As the sheet prints it: D648; 1.8MPa; thickness=6.4mm | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.23 g/cm3 | specimen not stated, ASTM D792As the sheet prints it: 23℃ D792 | |
| Melt mass-flow rate | 6 g/10minp. 1: Melt Flow Rate D1238 g/10min 190℃, 2.16Kg | specimen not stated, ASTM D1238As the sheet prints it: 190℃ 2.16Kg D1238 | |
| Mould shrinkage orientation not stated | 0.4-0.6 % | specimen not stated, ASTM D955As the sheet prints it: 23℃ D955 | |
Print settings
- Nozzle
- 190–240 °Cown data sheet
- Bed
- 50 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190-240℃; Bed None needed(or 50℃ if applicable)Yousu, YOUSU Silk PLA 3D FILMAENT Technical Data Sheetp. 1: Recommended printing settings; p. 1: Bed Temp
Price
Not in the price sample.
Its 3 documents
What the maker says (23)
- Surface finish
The shiny effect makes the layers marks produced by the printing process less obvious
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Surface finish
Pearlescent, gorgeous surface with shinning result
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Benefits
100% non-knotted with reliable printing
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Benefits
Easy to Print, No clogging
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Benefits
High Compatibility
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Surface finish
Without polishing, you can get pearlescent & gorgeous printing surface.
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Benefits
Unique based recipe assures less stringing and better overhang performance.
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Surface finish
Silk color obtained by light refraction.
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Surface finish
The color maybe different with the picture and different temperature setting will impact final silk result
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Benefits
Perfect filament winding that compatible with the most FDM/FFF 3D printers.
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Benefits
You don't need to bear printing failure after 8 hours printing or more due to tangle issue.
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Warping and shrinkage
Excellent first layer adhesion to reduce warpage, shrinkage, curl and print failure.
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Adhesion between layers
Good layer bonding strength make the printing parts stronger.
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Benefits
avoid print failure jam or clog and making you a smoothly printing & better surface.
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Surface finish
Silk PLA is normally marketed as specially colored PLA filament that it’s shinier than standard PLA.
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Good for
The parts printed with Silk PLA have a pearlescent or metallic shine that makes it very suitable for decoration.
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Surface finish
One of the advantages is that is possible to produce very attractive prints without the need for coating.
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Surface finish
The shiny effect makes the layers marks produced by the printing process less obvious and the printed parts don’t look like plastic that much.
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Benefits
Tangle free winding to assure you high success rate of 3d printing.
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Benefits
When you buy the roll, you can expect continuous printing without tangle issue.
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Benefits
Unique recipe – Make the filament stronger and assure less stringing and better overhang performance.
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Precision and tolerance
On line X & Y dimension diameter laser control and SGS ISO 9001 compliance plant assure us better capability to provide accurate product to consumer.
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1 - Benefits
As a return our consumer can get smoothly printing surface and less clogging issue.
Yousu, YOUSU Silk PLA 3D Filament with gorgeous surface, Tangle free, Pearlescent 1.75mm, 2.85mm 1kgp. 1
eSUN ePLA-Silk RainbowStrength XY, MPa—Strength Z, MPa11.1Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C45–60Chamber, °CnoneDrying, °C, h—
eSUN ePLA-Silk RainboweSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, Technical Data Sheet ePLA-Silk Rainbow7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 11.1 MPaphysically implausiblep. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: physically implausible as published |
| Elongation at break orientation not stated | 3.05 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 2023 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 75.34 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 4.58 kJ/m2p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT | 55.85 ℃p. 1: Heat distortion Temperature | GB/T 1634 | not in the median: measured on a moulded bar |
| Density | 1.21 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
| eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filament5 valuesUnless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile strength (yield or break not stated) Z | 11.1 MPap. 1: Tensile Strength (Z) (MPa) | no standard stated | in the median |
| Elongation at break Z | 3.05 %p. 1: Elongation at Break (Z) (%) | no standard stated | in the median |
| Flexural modulus XY | 2023.4 MPap. 1: Flexural Modulus (XY) (MPa) | no standard stated | in the median |
| Flexural strength XY | 75.34 MPap. 1: Flexural Strength (XY) (MPa) | no standard stated | in the median |
| Melt mass-flow rate | 4.5 (190℃/2.16kg) g/10minp. 1: Melt Flow Index(g/10min) | specimen not stated, no standard namedAs the sheet prints it: 2.16kg | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- not stated
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filament.
Its 2 print profiles, in the documents' words
- Nozzle 190- 230℃; Bed 45-60°CeSUN, Technical Data Sheet ePLA-Silk Rainbowp. 2: Recommended printing settings: Extruder Temperature, Build Platform Temperature; p. 2: Footnote
- Nozzle 210-230℃/410-446℉; Bed 45 - 60°CeSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1: Bed Temperature(°C); p. 1: Extruder Temperature(°C); p. 1: Printing precautions
Price
Not in the price sample.
Its 3 documents
What the maker says (27)
- Good for
Cultural Creativity • Animation Industry
eSUN, Technical Data Sheet ePLA-Silk Rainbowp. 1 - Benefits
Excellent printability
eSUN, Technical Data Sheet ePLA-Silk Rainbowp. 1 - Surface finish
smooth surface
eSUN, Technical Data Sheet ePLA-Silk Rainbowp. 1 - Surface finish
The ePLA silk rainbow has a silky luster and texture, while the various color variations give the model a brilliant and dazzling appearance, just like silk draped with rainbow colors.
eSUN, Technical Data Sheet ePLA-Silk Rainbowp. 1 - Surface finish
The surface of the model is smooth without any layering
eSUN, Technical Data Sheet ePLA-Silk Rainbowp. 1 - Supports and removal
Supporting materials are easier to peel off from the surface of the model compared to other materials.
eSUN, Technical Data Sheet ePLA-Silk Rainbowp. 1 - Printing advice
Reducing overhang angle structure in the model or the speed in printing to keep the cooling.
eSUN, Technical Data Sheet ePLA-Silk Rainbowp. 2 - Surface finish
PLA-Silk Rainbow offers a silky sheen and refined texture, with its spectrum of colors bestowing a vivid, radiant beauty on models, reminiscent of silk ribbons in a rainbow.
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Surface finish
The surface remains smooth, devoid of layering,
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Supports and removal
supports easy removal of support materials
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Surface finish
Featuring an 8-meter harmonious color gradient, it presents a smooth transition of rainbow hues, endowing printed models with a gorgeous and captivating visual expression.
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Surface finish
Combining a silky gloss with the rainbow gradient, it creates flowing layers of light and shadow reminiscent of silk, elevating the premium aesthetic of your creations.
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Surface finish
Inheriting the stable properties of our Silk series, it offers smooth extrusion and effectively hides layer lines, effortlessly achieving rainbow gradient effects even on complex models.
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Surface finish
Silky Finish
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Surface finish
Smooth Surface
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Benefits
Excellent Printability
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Surface finish
Vibrant Colors
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Good for
Cultural & Creative
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Printing advice
Slow down the outer-wall speed for better gloss
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Printing advice
Excessive printing speed can reduce surface gloss.
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Printing advice
When printing with PLA-Silk, slow down the outer wall speed to enhance the surface shine.
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Pitfalls and limitations
PLA-Silk has slightly poorer cooling performance than regular PLA.
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Printing advice
A higher cooling fan speed is required when printing overhangs.
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Pitfalls and limitations
PLA series materials have low heat resistance.
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Printing advice
We recommend keeping the printer enclosure open during printing to lower the chamber temperature.
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Printing advice
If the ambient temperature is too high (above 32°C), it is best to turn on the air conditioning to cool down the room.
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1 - Pitfalls and limitations
Excessive heat can cause the PLA filament to soften and deform at the extruder gears, leading to clogging.
eSUN, PLA-Silk Rainbow Filament 3D Printer Silk PLA Multicolor Filamentp. 1
Polymaker Panchroma Silk PLAStrength XY, MPa41.1Strength Z, MPa23.8Modulus XY, GPa2.4Charpy notched, kJ/m²13.8HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C25–60Chamber, °CnoneDrying, °C, h556 h
Polymaker Panchroma Silk PLAPolymaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Polymaker, Panchroma Product Data Sheet6 valuesThe same values also in Polymaker, Panchroma™ Silk PLA.Unless a row says otherwise: printed specimenprint settingsPrinted at 230 °C nozzle, 50 °C bed, 100% infill, 2 shells, 3 top and bottom layers, ambient environment, cooling fan on | |||
| Tensile modulus XY | 2403 ± 74.5 MPaData table, Silk: Young's modulus (X-Y) | ISO 527 | in the median |
| Tensile strength (yield or break not stated) XY | 41.1 ± 0.8 MPaData table, Silk: Tensile strength (X-Y) | ISO 527 | in the median |
| Tensile strength (yield or break not stated) Z | 23.8 ± 2.8 MPaData table, Silk: Tensile strength (Z) | ISO 527 | in the median |
| Charpy impact strength orientation not stated | 13.8 ± 1.3 kJ/m²Data table, Silk: Notched Charpy impact strength | ISO 179 | in the median |
| Vicat softening temperature | 64.7 °CData table, Silk: Vicat softening temperature | specimen not stated, ISO 306print settings not stated | |
| Density | 1.24 g/cm³ at 23 °CData table, Silk: Densityalso in Polymaker, Panchroma™ Silk PLA | specimen not stated, no standard statedtested at 23 °Cprint settings not stated | |
| Polymaker, Panchroma™ Silk PLA2 valuesUnless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile modulus XY | 2403 GPaphysically implausiblep. 1: Young's modulus GPa·ISO 527 (X-Y) | ISO 527 | not in the median: physically implausible as published |
| Charpy impact strength XY | 13.8 KJ/m²p. 1: Charpy, notched KJ/m²·ISO 179 (X-Y) | ISO 179 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 55 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 190-230 °C; Bed 25-60 °C; Chamber Not required (enclosure not needed); Drying 55 °C for 6 hPolymaker, Panchroma Silk PLA product pageTechnical Specifications
- Nozzle 190˚C - 230˚C; Bed 25˚C - 60˚C; Drying 55˚C for 6h (Only if the material has absorbed moisture)Polymaker, Panchroma™ Silk PLAp. 1: Printing Temperature; p. 1: Bed Temperature; p. 1: Drying Settings; p. 1: Enclosure; p. 1: Printing Tips; p. 1: Printing Tips
Price
Not in the price sample.
Its 4 documents
What the maker says (1)
- Printing advice
Use standard PLA settings, a 0.4 mm or larger nozzle, and full cooling for the best surface quality.
Polymaker, Panchroma™ Silk PLAp. 1
3DJake ecoPLA Silk RainbowStrength XY, MPa47.6Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C35–60Chamber, °C—Drying, °C, h—
3DJake ecoPLA Silk Rainbow3DJake
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3DJake, Technical Data Sheet 3DJAKE ecoPLA Silk Rainbow5 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus orientation not stated | 400.339 MPa (TDS prints "400,339" with European decimal separator)physically implausiblep. 1: E-Modulus | ISO 527 | not in the median: physically implausible as published |
| Tensile yield strength orientation not stated | 47.636 MPa (TDS prints "47,636" with European decimal separator)p. 1: Tensile strength at Yield | ISO 527 | in the median |
| Elongation at break orientation not stated | 47.29 % (TDS prints "47,290" with European decimal separator)p. 1: Strain at break | ISO 527 | in the median |
| Density | 1.238 g/cc (TDS prints "1,238" with European decimal separator)p. 1: Specific gravity | ISO 1183 | |
| Melt mass-flow rate | 10,48 g/10 minp. 1: MFR 210 °C/2,16kg | moulded bar (resin supplier's value), ASTM D1238As the sheet prints it: 210 °C/2 16kg D-1238 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 35–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210 – 230 °C; Bed If you have a heated bed the recommended temperature is ± 35-60˚C3DJake, Technical Data Sheet 3DJAKE ecoPLA Silk Rainbowp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Warping and shrinkage
Due to its low tendency to warp 3DJAKE ecoPLA Silk Rainbow can also be printed without a heated bed.
3DJake, Technical Data Sheet 3DJAKE ecoPLA Silk Rainbowp. 1
FormFutura Silk Gloss PLAStrength XY, MPa64Strength Z, MPa—Modulus XY, GPa2.58Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C215–230Bed, °C0–60Chamber, °CnoneDrying, °C, h—
FormFutura Silk Gloss PLAFormFutura
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet Silk Gloss PLA5 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2580 Mpap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 64 Mpap. 1: Tensile strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 58° Cp. 1: Viscat softening temp. | no standard stated | |
| Density | 1.24 g/ccp. 1: Specific gravity | ISO 1183 | |
| Melt mass-flow rate | 14 g/10minp. 1: Melt flow rate | ISO 1133 | |
Print settings
- Nozzle
- 215–230 °Cown data sheet
- Bed
- 0–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- not stated
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle ± 215 - 230° CFormFutura, Technical Data Sheet Silk Gloss PLAp. 1: Recommended printing settings
- Nozzle ± 215 - 230° C; Bed ± 0 - 60° CFormFutura, Silk Gloss PLAp. 1: General printing guidelines
Price
Not in the price sample.
Its 3 documents
What the maker says (16)
- Surface finish
Silk Gloss PLA (polylactic acid) is modified with another polymer to have a very smooth and silky surface finish with a high level of light dispersion and reflection.
FormFutura, Technical Data Sheet Silk Gloss PLAp. 1 - Surface finish
Silk Gloss PLA exhibits excellent 3D printing properties and allows objects to be 3D printed with a high level of glossiness and almost no visible layers.
FormFutura, Technical Data Sheet Silk Gloss PLAp. 1 - Surface finish
Good surface quality
FormFutura, Silk Gloss PLAp. 1 - Surface finish
Shiny silk gloss surface finish without visible layers and fine detail
FormFutura, Silk Gloss PLAp. 1 - Surface finish
High level of light dispersion and reflection
FormFutura, Silk Gloss PLAp. 1 - Printing advice
Lowering printing speed and temperature increases the silk gloss effect
FormFutura, Silk Gloss PLAp. 1 - Benefits
Easy to 3D print
FormFutura, Silk Gloss PLAp. 1 - Warping and shrinkage
Warp-free printing and improved flowing behaviour
FormFutura, Silk Gloss PLAp. 1 - Printing advice
Excellent first layer adhesion to several (un)heated print surfaces
FormFutura, Silk Gloss PLAp. 1 - Supports and removal
Compatible with AquaSolve PVA for complex dual extrusion 3D printing
FormFutura, Silk Gloss PLAp. 1 - Surface finish
Wide variety of vivid and brilliant silk gloss colours
FormFutura, Silk Gloss PLAp. 1 - Good for
Aesthetics, design, and art
FormFutura, Silk Gloss PLAp. 1 - Good for
Complex educational projects and models
FormFutura, Silk Gloss PLAp. 1 - Good for
Household articles
FormFutura, Silk Gloss PLAp. 1 - Good for
Visualization aids
FormFutura, Silk Gloss PLAp. 1 - Printing advice
Above displayed settings are meant as guidance to find your optimal print settings.
FormFutura, Silk Gloss PLAp. 1
3DJake ecoPLA SilkStrength XY, MPa39.9Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C35–60Chamber, °C—Drying, °C, h—
3DJake ecoPLA Silk3DJake
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3DJake, Technical Data Sheet 3DJAKE ecoPLA Silk5 values | |||
| Tensile modulus orientation not stated | 411.583 MPa (TDS prints "411,583" with European decimal separator)physically implausiblep. 1: E-Modulus | ISO 527 | not in the median: physically implausible as published |
| Tensile yield strength orientation not stated | 39.928 MPa (TDS prints "39,928" with European decimal separator)p. 1: Tensile strength at Yield | ISO 527 | in the median |
| Elongation at break orientation not stated | 44.554 % (TDS prints "44,554" with European decimal separator)p. 1: Strain at break | ISO 527 | in the median |
| Density | 1.224 g/cc (TDS prints "1,224" with European decimal separator)p. 1: Specific gravity | ISO 1183 | |
| Melt mass-flow rate | 10,92 g/10 minp. 1: MFR 210 °C/2,16kg | ASTM D1238As the sheet prints it: 210 °C/2 16kg D-1238 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 35–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210 – 230 °C; Bed If you have a heated bed the recommended temperature is ± 35-60˚C3DJake, Technical Data Sheet 3DJAKE ecoPLA Silkp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Warping and shrinkage
Due to its low tendency to warp 3DJAKE ecoPLA Silk can also be printed without a heated bed.
3DJake, Technical Data Sheet 3DJAKE ecoPLA Silkp. 1
Fabru Polylactide Silk (PLA Silk)Strength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C62HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–210Bed, °C50Chamber, °C—Drying, °C, h802 h
Fabru Polylactide Silk (PLA Silk)Fabru
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fabru, Polylactide Silk (PLA Silk)7 valuesThe same values also in Fabru, Polylactide Silk (PLA Silk). | |||
| Tensile modulus orientation not stated | 3440 MPap. 1: Tensile modulus (ASTM D882) | ASTM D882 | not in the median: measured on film |
| Tensile yield strength orientation not stated | 58.9 MPap. 1: Yield stress (ASTM D882) | ASTM D882 | not in the median: measured on film |
| Elongation at break orientation not stated | 9.4 %p. 1: Elongation at break (ASTM D882) | ASTM D882 | not in the median: measured on film |
| Elongation at yield orientation not stated | 5.8 %p. 1: Elongation at yield (ASTM D882) | ASTM D882 | listed under other properties |
| HDT at 0.45 MPa | 62 °Cp. 1: Heat deflection temperature | ASTM E2092As the sheet prints it: 0.45 MPa (ASTM E2092) | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm3p. 1: Density (ASTM D792) | ASTM D792 | |
| Melt mass-flow rate | 6.6 g/10minp. 1: MFR (ASTM D1238)also in Fabru, Polylactide Silk (PLA Silk) | ASTM D1238 | |
Print settings
- Nozzle
- 190–210 °Cown data sheet
- Bed
- 50 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 80 °C for 2 hown data sheet
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fabru, purefil PLA Silk blue 10m 1.75mm.
Its 3 print profiles, in the documents' words
- Nozzle 190-210 ° C; Bed 50-70 ° CFabru, purefil PLA Silk blue 10m 1.75mmp. 1: Nozzle temperature; p. 1: Printing table temperature
- Nozzle 190-210 ° C; Drying 80 ° C, 2hFabru, Polylactide Silk (PLA Silk)p. 1: Température d'impression; p. 1: Température de séchage / Temps de séchage
- Nozzle 190-210 °C; Bed Not required, 50°C recommended; Drying 60°C, 4hFabru, Polylactide Silk (PLA Silk)p. 1: Printing temperature; p. 1: Heated bed temperature; p. 1: Drying temperature / Drying time
Price
Not in the price sample.
Its 4 documents
What the maker says (18)
- Good for
This unique filament is particularly suitable for applications with high demands on the appearance of the printed parts.
Fabru, Polylactide Silk (PLA Silk)p. 1 - Benefits
PLA Silk is as easy to process as standard PLA and has slightly better mechanical properties.
Fabru, Polylactide Silk (PLA Silk)p. 1 - Pitfalls and limitations
Can become soft again from 60 degrees
Fabru, Polylactide Silk (PLA Silk)p. 1 - Pitfalls and limitations
Due to the additives included, PLA Silk is no longer 100% biodegradable and cannot be composted.
Fabru, Polylactide Silk (PLA Silk)p. 1 - Surface finish
Purefil PLA Silk is a PLA-based filament to which appropriate additives are added to achieve a metallic sheen.
Fabru, Polylactide Silk (PLA Silk)p. 1 - Good for
This unique filament is particularly suitable for applications with high demands on the appearance of the printed parts.
Fabru, purefil PLA Silk blue 10m 1.75mmp. 1 - Good for
The purefil filament samples are particularly suitable for small printed objects or for use in 3D printing pens.
Fabru, purefil PLA Silk blue 10m 1.75mmp. 1 - Benefits
The use of high-quality raw materials creates a 3D printer filament that is particularly easy to process.
Fabru, purefil PLA Silk blue 10m 1.75mmp. 1 - Precision and tolerance
Using a state-of-the-art manufacturing process, very low manufacturing tolerances are achieved, which leads to convincing print results with all FDM 3D printers.
Fabru, purefil PLA Silk blue 10m 1.75mmp. 1 - Precision and tolerance
low diameter and roundness tolerances
Fabru, purefil PLA Silk blue 10m 1.75mmp. 1 - Benefits
easy to print
Fabru, purefil PLA Silk blue 10m 1.75mmp. 1 - Surface finish
The printed parts have exceptional aesthetic properties.
Fabru, purefil PLA Silk blue 10m 1.75mmp. 1 - Benefits
This filament meets the compositional requirements of European Regulation No. 10/2011 on plastic materials intended for food contact.
Fabru, purefil PLA Silk blue 10m 1.75mmp. 1 - Surface finish
fantastically beautiful optics
Fabru, purefil PLA Silk blue 10m 1.75mmp. 1 - Benefits
slightly better mechanical properties than standard PLA
Fabru, purefil PLA Silk blue 10m 1.75mmp. 1 - Surface finish
beautiful shine effect
Fabru, purefil PLA Silk blue 10m 1.75mmp. 1 - Benefits
easily printable
Fabru, purefil PLA Silk blue 10m 1.75mmp. 1 - Surface finish
does not fade
Fabru, purefil PLA Silk blue 10m 1.75mmp. 1
iSANMATE PLA SilkStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–220Bed, °C35–60Chamber, °C0–40Drying, °C, h—
iSANMATE PLA SilkiSANMATE
Data sheet shared with iSANMATE PLA Silk Dual Color: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 200–220 °Cown data sheet
- Bed
- 35–60 °Cown data sheet
- Heated chamber
- 0–40 °Cown data sheet
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200 -220 ºC; Bed 35-60 ºC; Chamber 0-40 °CiSANMATE, PLA Silk Technical Data Sheet (TDS)p. 2: Nozzle Temperature, Bed Temperature, Chamber Temperature
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Warping and shrinkage
One of the key advantages of iSANMATE PLA Silk filament is its low shrinkage rate, which allows for the printing of large models without the risk of warping.
iSANMATE, PLA Silk Technical Data Sheet (TDS)p. 1 - Surface finish
iSANMATE PLA Silk filament is a premium 3D printing material that combines the eco-friendly benefits of PLA with a stunning silky finish.
iSANMATE, PLA Silk Technical Data Sheet (TDS)p. 1 - Surface finish
With its smooth, glossy finish, every print is sure to stand out
iSANMATE, PLA Silk Technical Data Sheet (TDS)p. 1 - Adhesion between layers
Its excellent interlayer adhesion enhances the strength and durability of printed models making it ideal for both functional and decorative applications.
iSANMATE, PLA Silk Technical Data Sheet (TDS)p. 1
iSANMATE PLA Silk Dual ColorStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–220Bed, °C35–60Chamber, °C0–40Drying, °C, h—
iSANMATE PLA Silk Dual ColoriSANMATE
Data sheet shared with iSANMATE PLA Silk: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, PLA Silk Dual Color Technical Data Sheet (TDS)5 values | |||
| Tensile modulus orientation not stated | 3309 MPap. 1: Tensile Modulus MD ASTM D882 | ASTM D882 | not in the median: measured on film |
| Tensile strength (yield or break not stated) orientation not stated | 110,3 MPap. 1: Tensile Strength MD ASTM D882 | ASTM D882 | not in the median: measured on film |
| Elongation at break orientation not stated | 19.35 %p. 1: Elongation at Break | no standard stated | not in the median: measured on film |
| Melting temperature | 145-160 °Cp. 1: Melting Point ASTM 3418 | no standard namedAs the sheet prints it: ASTM 3418 | |
| Density | 1.24 g/Cm3p. 1: Density | ASTM D1505 | |
Print settings
- Nozzle
- 200–220 °Cown data sheet
- Bed
- 35–60 °Cown data sheet
- Heated chamber
- 0–40 °Cown data sheet
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 200 -220 °C; Bed 35-60 °C; Chamber 0-40 °CiSANMATE, PLA Silk Dual Color Technical Data Sheet (TDS)p. 2: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Good for
whether for decorative items, gifts, or intricate models.
iSANMATE, PLA Silk Dual Color Technical Data Sheet (TDS)p. 1 - Adhesion between layers
This dual color filament offers excellent print quality with smooth layer adhesion
iSANMATE, PLA Silk Dual Color Technical Data Sheet (TDS)p. 1
AzureFilm SILKStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–240Bed, °C70–80Chamber, °C—Drying, °C, h—
AzureFilm SILKAzureFilm
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
AzureFilm, Technical Data Sheet SILK TDS8 valuesUnless a row says otherwise: Printed specimen at partial infillprint settings3D printer: Creality Ender 3; Nozzle temperature: 230 °C; Infill: 20 %; Slicer: Cura; Bed temperature: 55 °C; Shells: 2; Nozzle: 0,4 mm; Print speed: 50 mm/s; Layer height: 0,2 mm | |||
| Tensile modulus orientation not stated | 3,3 MPaphysically implausiblep. 1: Tensile modulus [MPa] | no standard namedAs the sheet prints it: rate=1 mm/min | not in the median: physically implausible as published |
| Tensile strength (yield or break not stated) orientation not stated | 59,0 MPap. 1: Tensile strength [MPa] | no standard namedAs the sheet prints it: rate=50 mm/min | not in the median: printed below 100 % infill |
| Elongation at break orientation not stated | 4,2 %p. 1: Strain at break (Tensile) [%] | no standard namedAs the sheet prints it: rate=50 mm/min | not in the median: printed below 100 % infill |
| Tensile strain at strength orientation not stated | 3,8 %p. 1: Strain at tensile strength [%] | no standard namedAs the sheet prints it: rate=50 mm/min | listed under other properties |
| Flexural modulus orientation not stated | 2,8 GPap. 1: Flexural modulus [GPa] | no standard namedAs the sheet prints it: rate=2 mm/min | not in the median: printed below 100 % infill |
| Flexural strength orientation not stated | 73,6 MPap. 1: Flexural strength [MPa] | no standard namedAs the sheet prints it: rate=2 mm/min | not in the median: printed below 100 % infill |
| Flexural elongation at break orientation not stated | 3,3 %p. 1: Strain at break (Flexural) [%] | no standard namedAs the sheet prints it: rate=2 mm/min | listed under other properties |
| Charpy impact strength orientation not stated | 10,4 kJ/m²p. 1: Charpy unnotched [kJ/m²] | no standard statedtested at 23 °C | not in the median: printed below 100 % infill |
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 70–80 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210 – 240°C; Bed Not required (recommended 70-80 °C)AzureFilm, Technical Data Sheet SILK TDSp. 1: Nozzle temperature; p. 1: Heated bed; p. 1: Build platform
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Benefits
This filament is suitable for parts that require high strenght and stiffness and easy processability (no warping, no irritating smell).
AzureFilm, Technical Data Sheet SILK TDSp. 1
eSUN ePLA-Silk MagicStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C45–60Chamber, °C—Drying, °C, h—
eSUN ePLA-Silk MagiceSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, Technical Data Sheet ePLA-Silk Magic7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) | 52 MPap. 1: Tensile Strength | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break | 14.4 %p. 1: Elongation at Break | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus | 1447 MPap. 1: Flexural Modulus | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength | 65 MPap. 1: Flexural Strength | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 5.86 kJ/m²p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT | 54.7 ℃p. 1: Heat distortion Temperature | GB/T 1634 | not in the median: measured on a moulded bar |
| Density | 1.256 g/cm³p. 1: Density | GB/T 1033 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190- 230℃; Bed 45-60°CeSUN, Technical Data Sheet ePLA-Silk Magicp. 2: Extruder Temperature, Build Platform Temperature; p. 2: Footnote
Price
Not in the price sample.
Its 2 documents
What the maker says (6)
- Good for
Toys
eSUN, Technical Data Sheet ePLA-Silk Magicp. 1 - Benefits
Easy to print as PLA
eSUN, Technical Data Sheet ePLA-Silk Magicp. 1 - Surface finish
Smooth surface
eSUN, Technical Data Sheet ePLA-Silk Magicp. 1 - Surface finish
The model has a dreamy and gorgeous two-color appearance, different color performance can be observed at different angles, rotating the model more dynamic sense of the two-color gradient brought about by the appearance of rich silk luster texture, the surface is smooth and does not show the layer of lines
eSUN, Technical Data Sheet ePLA-Silk Magicp. 1 - Supports and removal
support compared to other materials, easier to peel off from the surface of the model, the surface of the contact surface is smooth and even
eSUN, Technical Data Sheet ePLA-Silk Magicp. 1 - Printing advice
Reducing overhang angle structure in the model or the speed in printing to keep the cooling.
eSUN, Technical Data Sheet ePLA-Silk Magicp. 2
eSUN ePLA-Silk MysticStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg40Nozzle, °C190–230Bed, °C45–60Chamber, °C—Drying, °C, h—
eSUN ePLA-Silk MysticeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, Technical Data Sheet ePLA-Silk Mystic7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) | 52 MPap. 1: Tensile Strength | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break | 14.4 %p. 1: Elongation at Break | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus | 1447 MPap. 1: Flexural Modulus | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength | 65 MPap. 1: Flexural Strength | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 5.86 kJ/m²p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT | 54.7 ℃p. 1: Heat distortion Temperature | GB/T 1634 | not in the median: measured on a moulded bar |
| Density | 1.23 g/cm³p. 1: Density | GB/T 1033 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 190- 230℃; Bed 45-60°CeSUN, Technical Data Sheet ePLA-Silk Mysticp. 2: Extruder Temperature, Build Platform Temperature; p. 2: Footnote
Price
40 CAD/kgits one regular price in the sample
1 listing
- DigitMakers: 40 CAD/kgeSun ePLA-Silk Mystic Filament 1.75mm 1kg Spool / Gold Green Black (SKU ESUN-FL-ESILK-MSC-PLA-1.75-1KG-GGB)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (6)
- Good for
Toys
eSUN, Technical Data Sheet ePLA-Silk Mysticp. 1 - Benefits
Easy to print as PLA
eSUN, Technical Data Sheet ePLA-Silk Mysticp. 1 - Surface finish
Smooth surface
eSUN, Technical Data Sheet ePLA-Silk Mysticp. 1 - Surface finish
A filament of three colors, rich horizontal color collocation makes the print model full of mystery, each print can be observed at different angles to the rich color combination performance, rotating the model more three-color interweaving gradient brought about by the wonderful dynamic sense of the appearance of rich silk luster texture, the surface is smooth and does not show the layer of texture
eSUN, Technical Data Sheet ePLA-Silk Mysticp. 1 - Supports and removal
support compared to other materials, easier to peel off from the surface of the model.
eSUN, Technical Data Sheet ePLA-Silk Mysticp. 1 - Printing advice
Reducing overhang angle structure in the model or the speed in printing to keep the cooling.
eSUN, Technical Data Sheet ePLA-Silk Mysticp. 2
No product matches "".
Values are for the colour each sheet tested; pigment can change them.