PLA
196 products from 39 makers. Most documented first. Select a column to sort, a product to see its values, print settings and documents.
196 products
Key
- set apart: test bar not described as printed, or no stated load
- measured after annealing
- from the Bambu Lab Filament Guide
- Izod where no Charpy is published
- sold as toughened
- added filler or additive
- shared data sheet
- hardened nozzle
- not published
How the numbers are worked out
Bambu Lab PLA BasicStrength XY, MPa35Strength Z, MPa31Modulus XY, GPa2.58Charpy notched, kJ/m²7.9HDT 0.45, °C57HDT 1.8, °C54Price, CAD/kg28Nozzle, °C190–230Bed, °C35–45Chamber, °C25–45Drying, °C, h508 h
Bambu Lab PLA BasicBambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Basic21 valuesThe same values also in Bambu Lab, Technical Data Sheet V3.0 PLA Basic.Unless a row says otherwise: printed specimendryDried before testing (see preparation)as printedAll the specimens were annealed and dried at 55 °C for 8 h before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 220 °C Bed Temperature 35 °C Printing Speed 200 mm/s Infill Density 100% *All the specimens were annealed and dried at 55 °C for 8 h before testing. And the suggested annealing temperature of models printed with Bambu PLA Basic is 50 to 60 °C, and the time is 6 to 12 hours. The annealing effect depends on the annea | |||
| Tensile modulus XY | 2580 ± 220 MPap. 2: Young's Modulus (X-Y)also in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 2060 ± 170 MPap. 2: Young's Modulus (Z)also in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 35 ± 4 MPap. 2: Tensile Strength (X-Y)also in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 31 ± 3 MPap. 2: Tensile Strength (Z)also in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 12.2 ± 1.8 %p. 2: Breaking Elongation Rate (X-Y)also in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 7.5 ± 1.3 %p. 2: Breaking Elongation Rate (Z)also in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 2750 ± 160 MPap. 2: Bending Modulus (X-Y)also in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 2370 ± 150 MPap. 3: Bending Modulus (Z)also in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 76 ± 5 MPap. 3: Bending Strength (X-Y)also in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 59 ± 6 MPap. 3: Bending Strength (Z)also in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 26.6 ± 2.8 kJ/m²;p. 3: Impact Strength (X-Y) — unnotched | ISO 179, GB/T 1043 | not in the median: unnotched |
| Charpy impact strength XY | 7.9 ± 1.2 kJ/m²p. 3: Impact Strength (X-Y) — notchedalso in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | ISO 179, GB/T 1043 | in the median |
| Charpy impact strength Z | 13.8 ± 0.9 kJ/m²p. 3: Impact Strength (Z)also in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 57 °Cp. 2: Heat Deflection Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | ISO 75As the sheet prints it: ISO 75 0.45 MPa | in the median |
| HDT at 1.8 MPa | 54 °Cp. 2: Heat Deflection Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | ISO 75As the sheet prints it: ISO 75 1.8 MPa | in the median |
| Glass transition temperature | 60 °Cp. 2: Glass Transition Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | DSCAs the sheet prints it: DSC, 10 °C/min | in the median |
| Vicat softening temperature | 57 °Cp. 2: Vicar Softening Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | ISO 306, GB/T 1633 | |
| Melting temperature | 160 °Cp. 2: Melting Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.24 g/cm³p. 2: Densityalso in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | specimen not stated, ISO 1183 | |
| Water absorption | 0.43 %p. 2: Saturatedalso in Bambu Lab, Technical Data Sheet V3.0 PLA Basic | no standard namedAs the sheet prints it: rated Water Absorption Rate 25 °C, 55% RH | |
| Melt mass-flow rate | 23.2 ± 3.5 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
| Also named without a value: crystallization temperature. | |||
| Bambu Lab, Technical Data Sheet V3.0 PLA Basic1 value | |||
| Melt mass-flow rate | 42.4 ± 3.5 g/10 minp. 2: Melt Index 210 °C, 2.16 kg | no standard namedAs the sheet prints it: 210 °C 2.16 kg | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 35–45 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 50 °C for 8 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 190 - 230 °C; Bed 35 - 45 °C; Chamber 25 - 45 °C; Drying Blast Drying Oven: 50 °C, 8 hBambu Lab, Bambu Filament Technical Data Sheet - PLA BasicRecommended printing settings
- Nozzle 190 - 230 °C; Bed 35 - 45 °C; Chamber 25 - 45 °C; Drying Blast Drying Oven: 55 °C, 8 hBambu Lab, Technical Data Sheet V3.0 PLA Basicp. 1: Recommended printing settings: Nozzle Temperature; p. 1: Drying Settings before Printing: Blast Drying Oven
Price
28 CAD/kgthe median of its 2 regular prices in the sample
5 listings: 2 in its price, 2 with no regular price per kilogram recorded, 1 where a Canadian listing is used instead
- Bambu Lab Canada: 26 CAD/kgPLA Basic - Jade White (10100) / Refill / 1kgin its price; seen 10 Sep 2026
- Bambu Lab Canada: 30 per kg, sale pricePLA Basic - Jade White (10100) / Filament with spool / 1kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
- 3D Printing Canada: 26 CAD/kgCocoa Brown - Bambu Lab PLA Basic Filament - 1.75mm, 1kg / Refillnot used: a Canadian listing is used instead; seen 10 Sep 2026
- 3D Printing Canada: 30 CAD/kgRed - Bambu Lab PLA Basic Filament - 1.75mm, 1kg / Filament with spoolin its price; seen 10 Sep 2026
- 3D Printing Canada: 47 per kg, sale priceGray - Bambu Lab PLA Basic Filament - 1.75mm, 1kg / Refill - 2 Packnot used: no regular price per kilogram recorded; seen 10 Sep 2026
Its 3 documents
What the maker says (7)
- Benefits
PLA is the most common material in 3D printing as it's easy to print and inexpensive.
Bambu Lab, Technical Data Sheet V3.0 PLA Basicp. 1 - Benefits
Meanwhile, its stiffness and strength can meet most printing needs.
Bambu Lab, Technical Data Sheet V3.0 PLA Basicp. 1 - Benefits
It is worth mentioning that it can biodegrade in some artificial composting conditions.
Bambu Lab, Technical Data Sheet V3.0 PLA Basicp. 1 - Benefits
Bambu PLA Basic is designed for high-speed printing.
Bambu Lab, Technical Data Sheet V3.0 PLA Basicp. 1 - Adhesion between layers
Compared to general PLA, it can easily achieve printing speeds up to 250-300 mm/s and has excellent toughness and Z-layer strength.
Bambu Lab, Technical Data Sheet V3.0 PLA Basicp. 1 - Supports and removal
Support Material Support for PLA
Bambu Lab, Technical Data Sheet V3.0 PLA Basicp. 2 - Odour and emissions
Odor Odorless
Bambu Lab, Technical Data Sheet V3.0 PLA Basicp. 3
Specimen preparation (1)
All the specimens were annealed and dried at 55 °C for 8 h before testing
Bambu Lab, Bambu Filament Technical Data Sheet - PLA BasicTest specimen preparation
Chemicals and environment (7)
- Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - PLA BasicSolubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA BasicResistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA BasicResistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - PLA BasicResistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - PLA BasicResistance to Oil and Grease - Flammability: flammable
Flammable
Bambu Lab, Bambu Filament Technical Data Sheet - PLA BasicFlammability - Post-processing: described in words
the suggested annealing temperature of models printed with Bambu PLA Basic is 50 to 60 °C, and the time is 6 to 12 hours.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Basicp. 4: Annealing note
Bambu Lab PLA Basic GradientStrength XY, MPa36Strength Z, MPa32Modulus XY, GPa2.58Charpy notched, kJ/m²20.3HDT 0.45, °C57HDT 1.8, °C54Price, CAD/kg32Nozzle, °C190–230Bed, °C35–45Chamber, °C25–45Drying, °C, h558 h
Bambu Lab PLA Basic GradientBambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Basic21 valuesUnless a row says otherwise: printed specimendryDried before testing (see preparation)as printedAll the specimens were annealed and dried at 55 °C for 8 h ours before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 220 °C Bed Temperature 35 °C Printing Speed 200 mm/s Infill Density 100% *All the specimens were annealed and dried at 55 °C for 8 h ours before testing. 1. Tensile Testing 2. Bending Testing 3. Impact Testing • Disclaimer The performance values are tested by standard samples at Bambu Lab, and the values are for de | |||
| Tensile modulus XY | 2580 ± 150 MPap. 2: Young's Modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 1980 ± 100 MPap. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 36 ± 2 MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 32 ± 5 MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 15.2 ± 0.5 %p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 8.3 ± 0.3 %p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 2270 ± 60 MPap. 2: Bending Modulus (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 1990 ± 50 MPap. 2: Bending Modulus (Z) | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 73 ± 3 MPap. 2: Bending Strength (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 68 ± 5 MPap. 2: Bending Strength (Z) | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 61.2 ± 2.8 kJ/m² *;p. 2: Impact Strength (X-Y) — unnotched | ISO 179, GB/T 1043 | not in the median: unnotched |
| Charpy impact strength XY | 20.3 ± 1.2 kJ/m²p. 2: Impact Strength (X-Y) — notched | ISO 179, GB/T 1043 | in the median |
| Charpy impact strength Z | 23.8 ± 0.9 kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 57 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 0.45 MPa | in the median |
| HDT at 1.8 MPa | 54 °Cp. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 1.8 MPa | in the median |
| Glass transition temperature | 60 °Cp. 2: Glass Transition Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | in the median |
| Vicat softening temperature | 57 °Cp. 2: Vicar Softening Temperature | ISO 306, GB/T 1633 | |
| Melting temperature | 160 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.24 g/cm³p. 2: Density | specimen not stated, ISO 1183 | |
| Water absorption | 0.43 %p. 2: Saturated Water Absorption Rate | no standard namedAs the sheet prints it: te 25 °C, 55% RH | |
| Melt mass-flow rate | 45.8 ± 6.6 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
| Also named without a value: crystallization temperature. | |||
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 35–45 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 55 °C for 8 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190 - 230 °C; Bed 35 - 45 °C; Chamber 25 - 45 °C; Drying 55 °C, 8 hoursBambu Lab, Bambu Filament Technical Data Sheet - PLA BasicRecommended printing settings
Price
32 CAD/kgits one regular price in the sample
2 listings: 1 in its price, 1 with no regular price per kilogram recorded
- Bambu Lab Canada: 32 per kg, sale pricePLA Basic Gradient - Arctic Whisper (10900) / Filament with spool / 1kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
- DigitMakers: 32 CAD/kgBambu Lab PLA Basic Gradient 1.75mm - 1kg (Various Colors) / Arctic Whisper (10900) (SKU A00-M0-1.75-1000-SPL)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (7)
- Benefits
PLA is the most common material in 3D printing as it's easy to print and inexpensive.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Basicp. 1 - Benefits
Meanwhile, its stiffness and strength can meet most printing needs.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Basicp. 1 - Benefits
It is worth mentioning that it can biodegrade in some artificial composting conditions.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Basicp. 1 - Benefits
Bambu PLA Basic is designed for high-speed printing.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Basicp. 1 - Adhesion between layers
Compared to general PLA, it can easily achieve printing speeds up to 250-300 mm/s and has excellent toughness and Z-layer strength.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Basicp. 1 - Supports and removal
Support Material Support for PLA
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Basicp. 2 - Odour and emissions
Odor Odorless
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Basicp. 3
Specimen preparation (1)
All the specimens were annealed and dried at 55 °C for 8 h ours before testing
Bambu Lab, Bambu Filament Technical Data Sheet - PLA BasicTest specimen preparation
Chemicals and environment (6)
- Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - PLA BasicSolubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA BasicResistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA BasicResistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - PLA BasicResistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - PLA BasicResistance to Oil and Grease - Flammability: described in words
Flammable and self-extinguishing in the air
Bambu Lab, Bambu Filament Technical Data Sheet - PLA BasicFlammability
Bambu Lab PLA Tough+Strength XY, MPa34.9Strength Z, MPa20.9Modulus XY, GPa1.86Charpy notched, kJ/m²72.3HDT 0.45, °C61HDT 1.8, °C58Price, CAD/kg27Nozzle, °C220–250Bed, °C35–65Chamber, °C25–45Drying, °C, h558 h
Bambu Lab PLA Tough+Bambu Lab
Sold as toughened or impact-modified: "Engineered for real-world impact, Bambu PLA Tough+ delivers toughness on par with ABS and offers up to 2× stronger layer adhesion than standard PLA. It shrugs off bumps, drops, and hits, making it ideal for RC cars, model planes, and durable tools." (Bambu Lab, PLA Tough+ — official product page, later saved copy, p. 1: Engineered for real-world impact). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Tough+22 valuesThe same values also in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+.Unless a row says otherwise: printed specimendryDried before testing (see preparation)as printedAll the specimens were annealed and dried at 50 °C for 8 h before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 245 °C Bed Temperature 55 °C Printing Speed 150 mm/s InfillDensity 100% Allthe specimens were annealed and dried at 50 °C for 8 h before testing. And the suggested annealing temperature of models printed with Bambu PLA Tough+ is50 to 60 °C, and the time is6 to 12 hours. The annealing effect depends on the annealing | |||
| Tensile modulus XY | 1860 ± 70 MPap. 2: Young's Modulus (X-Y)also in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 1920 ± 20 MPap. 2: Young's Modulus (Z)also in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 34.9 ± 1 MPap. 2: Tensile Strength (X-Y)also in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 20.9 ± 1 MPap. 2: Tensile Strength (Z)also in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 9.4 ± 2.3 %p. 2: Breaking Elongation Rate (X-Y)also in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 9.3 ± 3 %p. 2: Breaking Elongation Rate (Z)also in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 2140 ± 80 MPap. 2: Bending Modulus (X-Y)also in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 2066 ± 100 MPap. 2: Bending Modulus (Z)also in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 65 ± 1 MPap. 2: Bending Strength (X-Y)also in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 54 ± 4 MPap. 2: Bending Strength (Z)also in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 80.6 ± 9.5 kJ/m²;p. 2: Impact Strength (X-Y) — unnotched | ISO 179, GB/T 1043 | not in the median: unnotched |
| Charpy impact strength XY | 72.3 ± 6.1 kJ/m²p. 2: Impact Strength (X-Y) — notchedalso in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | ISO 179, GB/T 1043 | not in the median: sold as toughened, set apart |
| Charpy impact strength Z | 18.6 ± 2.3 kJ/m²p. 2: Impact Strength (Z) (Silver)also in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Charpy impact strength Z | 25.9 ± 3.3 kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 61 °Cp. 2: Heat Deflection Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | ISO 75As the sheet prints it: ISO 75 0.45 MPa | in the median |
| HDT at 1.8 MPa | 58 °Cp. 2: Heat Deflection Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | ISO 75As the sheet prints it: ISO 75 1.8 MPa | in the median |
| Glass transition temperature | 61 °Cp. 2: Glass Transition Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | DSCAs the sheet prints it: DSC, 10 °C/min | in the median |
| Vicat softening temperature | 62 °Cp. 2: Vicat Softening Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | ISO 306, GB/T 1633 | |
| Melting temperature | 151 °Cp. 2: Melting Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.21 g/cm³p. 2: Densityalso in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | specimen not stated, ISO 1183 | |
| Water absorption | 0.27 %p. 2: Saturated Wateralso in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | no standard namedAs the sheet prints it: ter Absorption Rate 25 °C, 55% RH | |
| Melt mass-flow rate | 18.0 ± 2.5 g/10 minp. 2: Melt Indexalso in Bambu Lab, Technical Data Sheet V3.0 PLA Tough+ | specimen not stated, no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
Print settings
- Nozzle
- 220–250 °Cown data sheet
- Bed
- 35–65 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 55 °C for 8 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 220 -250 °C; Bed 35 -65 °C; Chamber 25 - 45 °C; Drying Blast Drying Oven: 55 °C, 8 hBambu Lab, Bambu Filament Technical Data Sheet - PLA Tough+Recommended printing settings; p. 1: Drying Settings before Printing: Blast Drying Oven
- Nozzle 220 - 250 °C; Bed 35 - 65 °C; Chamber 25 – 45 °C; Drying Blast Drying Oven: 55 °C, 8 hBambu Lab, Technical Data Sheet V3.0 PLA Tough+p. 1: Recommended printing settings: Nozzle Temperature; p. 1: Drying Settings before Printing: Blast Drying Oven
Price
27 CAD/kgits one regular price in the sample
2 listings: 1 in its price, 1 with no regular price per kilogram recorded
- Bambu Lab Canada: 31 per kg, sale pricePLA Tough+ - White (12107) / Filament with Spool / 1kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
- Bambu Lab Canada: 27 CAD/kgPLA Tough+ - White (12107) / Refill / 1kgin its price; seen 10 Sep 2026
Its 4 documents
What the maker says (5)
- Supports and removal
Support Material Support for PLA
Bambu Lab, Technical Data Sheet V3.0 PLA Tough+p. 1 - Odour and emissions
Odor Odorless
Bambu Lab, Technical Data Sheet V3.0 PLA Tough+p. 2 - Benefits
Engineered for real-world impact, Bambu PLA Tough+ delivers toughness on par with ABS and offers up to 2× stronger layer adhesion than standard PLA. It shrugs off bumps, drops, and hits, making it ideal for RC cars, model planes, and durable tools.
Bambu Lab, PLA Tough+ — official product page, later saved copyp. 1: Engineered for real-world impact - Good for
Designed for repeated flexing, Bambu PLA Tough+ outlasts standard PLA where it typically fails. It’s perfect for prints that need to bend without breaking—like springs, clips, and connectors.
Bambu Lab, PLA Tough+ — official product page, later saved copyp. 1: Designed for repeated flexing - Good for
With enhanced durability, Bambu PLA Tough+ maintains its performance over time, extending the lifespan of standard PLA prints and making it suitable for demanding, tool-grade applications. Use it for parts that need impact resistance and repeated flexing.
Bambu Lab, PLA Tough+ — official product page, later saved copyp. 1: enhanced durability
Chemicals and environment (7)
- Flammability: flammable
Flammable
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Tough+Flammability - Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Tough+Solubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Tough+Resistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Tough+Resistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Tough+Resistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Tough+Resistance to Oil and Grease - Post-processing: described in words
the suggested annealing temperature of models printed with Bambu PLA Tough+ is 50 to 60 °C, and the time is 6 to 12 hours.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Tough+p. 3: Annealing note
Bambu Lab PLA TranslucentStrength XY, MPa55.4Strength Z, MPa28.9Modulus XY, GPa2.88Charpy notched, kJ/m²6.7HDT 0.45, °C60HDT 1.8, °C55Price, CAD/kg30Nozzle, °C200–240Bed, °C35–65Chamber, °C25–45Drying, °C, h508 h
Bambu Lab PLA TranslucentBambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Translucent21 valuesUnless a row says otherwise: printed specimendryDried before testing (see preparation)as printedAll the specimens were annealed and dried at 50 °C for 8 h before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 220 °C Bed Temperature 35 °C Printing Speed 150 mm/s InfillDensity 100% Allthe specimens were annealed and dried at 50 °C for 8 h before testing.And the suggested annealing temperature ofmodels printed with Bambu PLA Translucent is50 to 60 °C, and the time is 6 to 12 hours. The annealing effect depends on the annea | |||
| Tensile modulus XY | 2880 ± 190 MPap. 2: Young's Modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 2550 ± 150 MPap. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 55.4 ± 5 MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 28.9 ± 4 MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 11 ± 3.1 %p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 9.6 ± 1.7 %p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 3000 ± 120 MPap. 2: Bending Modulus (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 2650 ± 140 MPap. 2: Bending Modulus (Z) | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 85 ± 3 MPap. 2: Bending Strength (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 42 ± 4 MPap. 2: Bending Strength (Z) | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 18.5 ± 3.7 kJ/m²;p. 2: Impact Strength (X-Y) — unnotched | ISO 179, GB/T 1043 | not in the median: unnotched |
| Charpy impact strength XY | 6.7 ± 2.2 kJ/m²p. 2: Impact Strength (X-Y) — notched | ISO 179, GB/T 1043 | in the median |
| Charpy impact strength Z | 8.5 ± 1.2 kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 60 ℃p. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 0.45 MPa | in the median |
| HDT at 1.8 MPa | 55 ℃p. 2: Heat Deflection Temperature | ISO 75As the sheet prints it: ISO 75 1.8 MPa | in the median |
| Glass transition temperature | 54 ℃p. 2: Glass Transition Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | in the median |
| Vicat softening temperature | 61 ℃p. 2: Vicat Softening Temperature | ISO 306, GB/T 1633 | |
| Melting temperature | 156 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.22 g/cm³p. 2: Density | specimen not stated, ISO 1183 | |
| Water absorption | 0.34 %p. 2: Saturated Water | no standard namedAs the sheet prints it: ter Absorption Rate 25 °C, 55% RH | |
| Melt mass-flow rate | 4.08 ± 1.5 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
Print settings
- Nozzle
- 200–240 °Cown data sheet
- Bed
- 35–65 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 50 °C for 8 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 200 -240 °C; Bed 35 -65 °C; Chamber 25 -45°C; Drying Blast Drying Oven: 50 °C, 8 hBambu Lab, Bambu Filament Technical Data Sheet - PLA TranslucentRecommended printing settings
Price
30 CAD/kgits one regular price in the sample
1 listing
- Bambu Lab Canada: 30 CAD/kgPLA Translucent - Teal (13612) / Filament with spool / 1 kgin its price; seen 10 Sep 2026
Its 2 documents
What the maker says (5)
- Good for
Bambu PLA Translucent, available in 10 vibrant colors, is perfect for crafting lightshades and decorative lanterns.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Translucentp. 1 - Good for
With enhanced durability, it's ideal for long-term indoor lighting and décor.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Translucentp. 1 - Surface finish
Its frosted finish diffuses light beautifully.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Translucentp. 1 - Supports and removal
Support Material Support for PLA
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Translucentp. 1 - Odour and emissions
Odor Odorless
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Translucentp. 3
Chemicals and environment (7)
- Flammability: flammable
Flammable
Bambu Lab, Bambu Filament Technical Data Sheet - PLA TranslucentFlammability - Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - PLA TranslucentSolubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA TranslucentResistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA TranslucentResistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - PLA TranslucentResistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - PLA TranslucentResistance to Oil and Grease - Post-processing: described in words
the suggested annealing temperature of models printed with Bambu PLA Translucent is 50 to 60 °C, and the time is 6 to 12 hours.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Translucentp. 3: Annealing note
Kingroon PLA BasicStrength XY, MPa35Strength Z, MPa31Modulus XY, GPa2.58Charpy notched, kJ/m²7.9HDT 0.45, °C57HDT 1.8, °C54Price, CAD/kg—Nozzle, °C190–230Bed, °C35–45Chamber, °C25–45Drying, °C, h508 h
Kingroon PLA BasicKingroon
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Kingroon, KINGROON Filament Technical Data Sheet V1.0 PLA Basic20 values | |||
| Tensile modulus XY | 2580 ± 220 Mpap. 2: Young's Modulus(X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 2060 ± 170 MPap. 2: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 35 ± 4 MPap. 2: Tensile Strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 31 ± 3 MPap. 2: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 12.2 ± 1.8 %p. 2: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 7.5 ± 1.3 %p. 2: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 2750 ± 160 MPap. 2: Bending Modulus (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 2370 ± 150 Mpap. 2: Bending Modulus (Z) | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 76 ± 5 Mpap. 2: Bending Strength (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 59 ± 6 Mpap. 2: Bending Strength (Z) | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 7.9 ± 1.2 kJ/m²p. 2: Impact Strength (X-Y) (notched) | ISO 179, GB/T 1043 | in the median |
| Charpy impact strength XY | 26.6 ± 2.8 kJ/m²;p. 2: Impact Strength (X-Y) (unnotched, the first of the cell's two values) | ISO 179, GB/T 1043 | not in the median: unnotched |
| Charpy impact strength Z | 13.8 ± 0.9 kJ/m²p. 2: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 57 °Cp. 2: Heat Deflection Temperature (57 °C) | ISO 75As the sheet prints it: ISO 75; 0.45 Mpa | in the median |
| HDT at 1.8 MPa | 54 °Cp. 2: Heat Deflection Temperature (54 °C) | ISO 75As the sheet prints it: ISO 75; 1.8 Mpa | in the median |
| Glass transition temperature | 60 °Cp. 2: Glass Transition Temperature | DSCAs the sheet prints it: DSC; rate=10 °C/min | in the median |
| Vicat softening temperature | 57 °Cp. 2: Vicar Softening Temperature | ISO 306, GB/T 1633 | |
| Melting temperature | 160 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC; rate=10 °C/min | |
| Density | 1.24 g/cm³p. 2: Density | ISO 1183 | |
| Melt mass-flow rate | 23.2 ± 3.5 g/10 minp. 2: Melt Index | no standard namedAs the sheet prints it: 2.16 kg | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 35–45 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 50 °C for 8 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190 - 230 °C; Bed 35 - 45 °C; Chamber 25 - 45 °C; Drying Blast Drying Oven: 50 °C, 8 hKingroon, KINGROON Filament Technical Data Sheet V1.0 PLA Basicp. 1: Nozzle Temperature, Bed Temperature, Chamber Temperature; p. 1: Drying Settings before Printing; p. 1: Nozzle Size; p. 1: Bed Type
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
Additionally, PLA can biodegrade under certain artificial composting conditions, making it a more environmentally friendly option.
Kingroon, KINGROON Filament Technical Data Sheet V1.0 PLA Basicp. 1 - Benefits
KINGROON PLA Basic is specially designed for high-speed printing.
Kingroon, KINGROON Filament Technical Data Sheet V1.0 PLA Basicp. 1 - Odour and emissions
Odor Odorless
Kingroon, KINGROON Filament Technical Data Sheet V1.0 PLA Basicp. 2
Polymaker HT PLAStrength XY, MPa42.9Strength Z, MPa20.8Modulus XY, GPa2.95Charpy notched, kJ/m²4.94HDT 0.45, °C61HDT 1.8, °C59Price, CAD/kg28Nozzle, °C210–230Bed, °C25–60Chamber, °CnoneDrying, °C, h606 h
Polymaker HT PLAPolymaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Polymaker, Polymaker HT PLA17 valuesThe same values also in Polymaker, Polymaker HT PLA and Polymaker, Polymaker™ HT-PLA Technical Data Sheet.Unless a row says otherwise:as printed | |||
| Tensile modulus XY | 2945.75 ± 77.35 MPap. 4: Young's modulus (X-Y)also in Polymaker, Polymaker HT PLAalso in Polymaker, Polymaker™ HT-PLA Technical Data Sheet | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Infill 100%; Environmental temperature Ambient temperature; Cooling fan ON | in the median |
| Tensile modulus Z | 2596.43 ± 160.44 MPap. 4: Young's modulus (Z)also in Polymaker, Polymaker HT PLAalso in Polymaker, Polymaker™ HT-PLA Technical Data Sheet | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Infill 100%; Environmental temperature Ambient temperature; Cooling fan ON | in the median |
| Tensile strength (yield or break not stated) XY | 42.86 ± 0.76 MPap. 4: Tensile strength (X-Y)also in Polymaker, Polymaker HT PLAalso in Polymaker, Polymaker™ HT-PLA Technical Data Sheet | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Infill 100%; Environmental temperature Ambient temperature; Cooling fan ON | in the median |
| Tensile strength (yield or break not stated) Z | 20.83 ± 0.51 Mpap. 4: Tensile strength (Z)also in Polymaker, Polymaker HT PLAalso in Polymaker, Polymaker™ HT-PLA Technical Data Sheet | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Infill 100%; Environmental temperature Ambient temperature; Cooling fan ON | in the median |
| Elongation at break XY | 2.80 ± 0.26 %p. 4: Elongation at break (X-Y)also in Polymaker, Polymaker HT PLAalso in Polymaker, Polymaker™ HT-PLA Technical Data Sheet | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Infill 100%; Environmental temperature Ambient temperature; Cooling fan ON | in the median |
| Elongation at break Z | 0.97 ± 0.05 %p. 4: Elongation at break (Z)also in Polymaker, Polymaker HT PLAalso in Polymaker, Polymaker™ HT-PLA Technical Data Sheet | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Infill 100%; Environmental temperature Ambient temperature; Cooling fan ON | in the median |
| Flexural modulus XY | 2893.46 ± 53.15 MPap. 4: Bending modulus (X-Y)also in Polymaker, Polymaker HT PLAalso in Polymaker, Polymaker™ HT-PLA Technical Data Sheet | ISO 178, GB/T 9341print settingsPrinting temperature 230°C; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Infill 100%; Environmental temperature Ambient temperature; Cooling fan ON | in the median |
| Flexural modulus Z | 2411.22 ± 139.22 MPap. 4: Bending modulus (Z)also in Polymaker, Polymaker HT PLAalso in Polymaker, Polymaker™ HT-PLA Technical Data Sheet | ISO 178, GB/T 9341print settingsPrinting temperature 230°C; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Infill 100%; Environmental temperature Ambient temperature; Cooling fan ON | in the median |
| Flexural strength XY | 74.04 ± 0.66 MPap. 4: Bending strength (X-Y)also in Polymaker, Polymaker HT PLAalso in Polymaker, Polymaker™ HT-PLA Technical Data Sheet | ISO 178, GB/T 9341print settingsPrinting temperature 230°C; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Infill 100%; Environmental temperature Ambient temperature; Cooling fan ON | in the median |
| Flexural strength Z | 29.39 ± 1.18 Mpap. 4: Bending strength (Z)also in Polymaker, Polymaker HT PLAalso in Polymaker, Polymaker™ HT-PLA Technical Data Sheet | ISO 178, GB/T 9341print settingsPrinting temperature 230°C; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Infill 100%; Environmental temperature Ambient temperature; Cooling fan ON | in the median |
| Charpy impact strength Z | 4.50±0.11 kJ/m²p. 4: Notched Charpy impact strength (Z) | ISO 179, GB/T 1043 | not in the median: measured on a bar in another orientation |
| HDT at 0.45 MPa | 61.4 °Cp. 3: Heat deflection temperature ISO 75 0.45MPa | ISO 75As the sheet prints it: 0.45MPa 75 as printed ISO 75 | in the median |
| HDT at 1.8 MPa | 58.6 °Cp. 3: Heat deflection temperature ISO 75 1.8MPa | ISO 75As the sheet prints it: 1.8MPa 75 as printed ISO 75 | in the median |
| Vicat softening temperature | 156.2 °Cp. 3: Vicat softening temperature ISO 306, GB/T 1633 | ISO 306, GB/T 1633As the sheet prints it: 306 as printed ISO 306 GB/T 1633 | |
| Melting temperature | 177.23 °Cp. 3: Melting temperature DSC, 10°C/minalso in Polymaker, Polymaker HT PLA | DSCtreatment not stated | |
| Crystallization temperature | 77.21 °Cp. 3: Crystallization temperature DSC, 10°C/minalso in Polymaker, Polymaker HT PLA | DSCtreatment not stated | |
| Density | 1.287 g/cm3p. 2: Density ISO1183, GB/T1033also in Polymaker, Polymaker HT PLA | ISO 1183, GB/T 1033As the sheet prints it: 1183 ISO1183 GB/T1033 | |
Polymaker, Polymaker™ HT-PLA Technical Data Sheet17 valuesThe same values also in Polymaker, Polymaker HT PLA and Polymaker, Polymaker HT PLA.Unless a row says otherwise: printed specimenannealed at a temperature its sheet does not state for a time its sheet does not stateafter annealing | |||
| Tensile modulus XY | 3267.16 ± 66.41 MPa | ISO 527, GB/T 1040 | not in the median: annealed; the as-printed value is in it |
| Tensile strength (yield or break not stated) Z | 18.82 ± 0.98 MPa | ISO 527, GB/T 1040 | not in the median: annealed; the as-printed value is in it |
| Elongation at break XY | 1.87 ± 0.09% | ISO 527, GB/T 1040 | not in the median: annealed; the as-printed value is in it |
| Elongation at break Z | 0.81 ± 0.08% | ISO 527, GB/T 1040 | not in the median: annealed; the as-printed value is in it |
| Flexural modulus XY | 2960.42 ± 46.91 MPa | ISO 178, GB/T 9341 | not in the median: annealed; the as-printed value is in it |
| Flexural strength XY | 66.75 ± 0.51 MPa | ISO 178, GB/T 9341 | not in the median: annealed; the as-printed value is in it |
| Flexural strength Z | 28.95 ± 1.44 MPa | ISO 178, GB/T 9341 | not in the median: annealed; the as-printed value is in it |
| Charpy impact strength XY | 4.94 ± 0.31 kJ/m2p. 1: Notched charpy impact strength (X-Y) | ISO 179, GB/T 1043as printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | in the median |
| Charpy impact strength XY | 4.67 ± 0.20 kJ/m2p. 1: Notched Charpy impact strength (X-Y) | ISO 179, GB/T 1043print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | not in the median: annealed; the as-printed value is in it |
| Charpy impact strength Z | 4.39 ± 0.18 kJ/m2p. 1: Notched Charpy impact strength (Z) | no standard namedAs the sheet prints it: Z annealedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | not in the median: annealed; the as-printed value is in it |
| HDT at 0.45 MPa | 107.2°C (annealed)p. 1: Heat deflection temp. (ISO 75, 0.45MPa) | ISO 75As the sheet prints it: ISO 75, 0.45MPa | not in the median: annealed; the as-printed value is in it |
| HDT at 1.8 MPa | 71.7°C (annealed)p. 1: Heat deflection temp. (ISO 75, 1.8MPa) | ISO 75As the sheet prints it: ISO 75, 1.8MPa | not in the median: annealed; the as-printed value is in it |
| Glass transition temperature | 59.8 °Cp. 1: Glass transition temp. DSC, 10°C/minalso in Polymaker, Polymaker HT PLAalso in Polymaker, Polymaker HT PLA | DSCtreatment not stated | in the median |
| Vicat softening temperature | 155.2°C (annealed)p. 1: Viact Softening temp. | ISO 306, GB/T 1633 | |
| Decomposition temperature | 335.94°Cp. 1: Decompostition temp. | TGAAs the sheet prints it: TGA, 20°C; rate=20 °C | |
| Density | 1.29 g/cm3p. 1: Density ISO1183, GB/T1033 | ISO 1183, GB/T 1033As the sheet prints it: 1183 ISO1183 GB/T1033 | |
| Melt mass-flow rate | 22.6 g/10minp. 1: Melt index 210°C, 2.16 kgalso in Polymaker, Polymaker HT PLAalso in Polymaker, Polymaker HT PLA | specimen not stated, no standard namedAs the sheet prints it: 210°C 2.16 kg | |
Polymaker, Polymaker HT PLA3 valuesUnless a row says otherwise: printed specimen (implied by the document)as printedAs printed | |||
| HDT at 0.45 MPa | 69.9 °Cp. 3: Heat deflection temperature ISO 75 0.45MPa | ISO 75As the sheet prints it: 0.45MPa 75 as printed ISO 75 | not in the median: another value of this product is in it |
| HDT at 1.8 MPa | 57.2 °Cp. 3: Heat deflection temperature ISO 75 1.8MPa | ISO 75As the sheet prints it: 1.8MPa 75 as printed ISO 75 | not in the median: another value of this product is in it |
| Vicat softening temperature | 152 °Cp. 3: Vicat softening temperature ISO 306, GB/T 1633 | specimen not stated, ISO 306, GB/T 1633As the sheet prints it: 306 as printed ISO 306 GB/T 1633 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 60 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
- Annealing
- temperature not statedown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 210-230 (°C); Bed 25-60 (°C); Drying 60°C for 6hPolymaker, Polymaker HT PLAp. 5: Recommended printing settings: Nozzle temperature; p. 5: Drying setting; p. 5: Closure chamber
- Nozzle 210-230 (°C); Bed 25-60 (°C); Drying 60°C for 6hPolymaker, Polymaker HT PLAp. 5: Recommended printing settings: Nozzle temperature; p. 5: Drying setting; p. 5: Closure chamber
- Nozzle 210-230°C; Bed 25-60°C; Drying 60°C/6HPolymaker, Polymaker™ HT-PLA Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time; p. 1: Closure chamber; p. 1: Build surface treatment; p. 1: *Based on 0.4mm nozzle
Price
28 CAD/kgits one regular price in the sample
1 listing
- Voxel Factory: 28 CAD/kgPolymaker HT-PLA 1.75mm 1Kg / Black (SKU PMK-HTP-BLK-175-1KG)in its price; seen 30 Sep 2026
Its 4 documents
What the maker says (6)
- Benefits
Enjoy the ease of printing and eco-friendliness of PLA—no post-processing required.
Polymaker, Polymaker HT PLAp. 2 - Benefits
Polymaker™ HT-PLA sets a new standard for heat-stable 3D printing, maintaining its shape at high temperatures (up to 130°C) without sagging or deforming under its own weight.
Polymaker, Polymaker HT PLAp. 2 - Warping and shrinkage
Shrinkage (D) 0.52%
Polymaker, Polymaker HT PLAp. 3 - Warping and shrinkage
Shrinkage (X-Y) 0.88%
Polymaker, Polymaker HT PLAp. 3 - Benefits
Polymaker™ HT-PLA sets a new standard for heat-stable 3D printing, maintaining its shape at high temperatures (up to 150°C) without sagging or deforming under its own weight.
Polymaker, Polymaker HT PLAp. 2 - Moisture sensitivity
It is highly recommended to use the PolyBox™ or PolyDryer™ Box when printing or storing Polymaker™ HT-PLA.
Polymaker, Polymaker™ HT-PLA Technical Data Sheetp. 1
Chemicals and environment (3)
- Post-processing: described in words
For higher temperature stability, you can anneal this material for 30 minutes @ 80-90°C.
Polymaker, Polymaker HT PLAp. 5: Annealing note - Acid resistance: resistant
Good
Effect of weak acids · weakPolymaker, Polymaker HT PLAp. 2: Effect of weak acids Good - Acid resistance: not resistant
Poor
Effect of strong acids · strongPolymaker, Polymaker HT PLAp. 2: Effect of strong acids Poor
Polymaker HT PLA ProStrength XY, MPa37.6Strength Z, MPa26.8Modulus XY, GPa2.27Charpy notched, kJ/m²9.94HDT 0.45, °C56HDT 1.8, °C54Price, CAD/kg—Nozzle, °C230Bed, °C25–65Chamber, °CnoneDrying, °C, h606 h
Polymaker HT PLA ProPolymaker
Sold as toughened or impact-modified: "Polymaker™ HT-PLA Pro is a tough PLA engineered for functional parts that need to survive real-world use." (Polymaker, POLYMAKER™ HT-PLA Pro Technical Data Sheet, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Polymaker, POLYMAKER™ HT-PLA Pro Technical Data Sheet37 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 2.27 ± 0.05 GPap. 1: Young’s modulus (X-Y) | ISO 527As the sheet prints it: ISO 527-1: 2019as printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 65°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | in the median |
| Tensile modulus XY | 2.53 ± 0.03 GPap. 1: Young’s modulus (X-Y) ISO 527-1: 2019 | ISO 527As the sheet prints it: X-Y annealed ISO 527-1: 2019annealed at a temperature its sheet does not state for a time its sheet does not stateannealedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 65°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | not in the median: annealed; the as-printed value is in it |
| Tensile modulus Z | 1.85 ± 0.04 GPap. 1: Young’s modulus (Z) ISO 527-2: 2025 | ISO 527As the sheet prints it: Z as printed ISO 527-2: 2025as printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 65°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | in the median |
| Tensile modulus Z | 1.94±0.16 GPap. 1: Young’s modulus (Z) | ISO 527As the sheet prints it: ISO 527-2: 2025annealed at a temperature its sheet does not state for a time its sheet does not stateafter annealing | not in the median: annealed; the as-printed value is in it |
| Tensile strength (yield or break not stated) XY | 37.6 ± 1.1 MPap. 1: Tensile strength (X-Y) | ISO 527As the sheet prints it: ISO 527-1: 2019as printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 65°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | in the median |
| Tensile strength (yield or break not stated) Z | 26.8 ± 1.2 MPap. 1: Tensile strength (Z) ISO 527-2: 2025 | ISO 527As the sheet prints it: Z as printed ISO 527-2: 2025as printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 65°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | in the median |
| Tensile strength (yield or break not stated) Z | 25.0 ± 1.5 MPap. 1: Tensile strength (Z) | ISO 527As the sheet prints it: ISO 527-2: 2025annealed at a temperature its sheet does not state for a time its sheet does not stateannealedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 65°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | not in the median: annealed; the as-printed value is in it |
| Elongation at break XY | 13 ± 3 %p. 1: Elongation at break (X-Y) | ISO 527As the sheet prints it: ISO 527-1: 2019as printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 65°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | in the median |
| Elongation at break XY | 4.3±0.7 % | ISO 527As the sheet prints it: ISO 527-1: 2019annealed at a temperature its sheet does not state for a time its sheet does not stateafter annealing | not in the median: annealed; the as-printed value is in it |
| Elongation at break Z | 2.6 ± 0.7 %p. 1: Elongation at break (Z) ISO 527-2: 2025 | ISO 527As the sheet prints it: Z as printed ISO 527-2: 2025as printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 65°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | in the median |
| Elongation at break Z | 1.9±0.4 %p. 1: Elongation at break (Z) | ISO 527As the sheet prints it: ISO 527-2: 2025annealed at a temperature its sheet does not state for a time its sheet does not stateafter annealing | not in the median: annealed; the as-printed value is in it |
| Flexural modulus XY | 2.21 ± 0.14 GPap. 1: Bending modulus (X-Y) | ISO 178As the sheet prints it: ISO 178: 2019as printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 65°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | in the median |
| Flexural modulus XY | 2.42±0.05 GPa | ISO 178As the sheet prints it: ISO 178: 2019annealed at a temperature its sheet does not state for a time its sheet does not stateafter annealing | not in the median: annealed; the as-printed value is in it |
| Flexural modulus Z | 1.91 ± 0.04 GPap. 1: Bending modulus (Z) | ISO 178As the sheet prints it: ISO 178: 2019as printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 65°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | in the median |
| Flexural modulus Z | 2.02±0.03 GPa | ISO 178As the sheet prints it: ISO 178: 2019annealed at a temperature its sheet does not state for a time its sheet does not stateafter annealing | not in the median: annealed; the as-printed value is in it |
| Flexural strength XY | 60.1 ± 2.1 MPap. 1: Bending strength (X-Y) | ISO 178As the sheet prints it: ISO 178: 2019as printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 65°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | in the median |
| Flexural strength XY | 65.0±0.7 MPa | ISO 178As the sheet prints it: ISO 178: 2019annealed at a temperature its sheet does not state for a time its sheet does not stateafter annealing | not in the median: annealed; the as-printed value is in it |
| Flexural strength Z | 37.1 ± 1.5 MPap. 1: Bending strength (Z) | ISO 178As the sheet prints it: ISO 178: 2019as printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 65°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | in the median |
| Flexural strength Z | 34.8±0.3 MPa | ISO 178As the sheet prints it: ISO 178: 2019annealed at a temperature its sheet does not state for a time its sheet does not stateafter annealing | not in the median: annealed; the as-printed value is in it |
| Charpy impact strength XY | 45.7 ± 7.3 kJ/m2p. 1: Notched charpy impact strength (X-Y) Unnotched charpy impact strength (X-Y) | no standard statedas printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 65°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | not in the median: unnotched |
| Charpy impact strength XY | 10.1 ± 1.3 kJ/m2p. 1: Notched charpy impact strength (X-Y) Notched Impact Strength (X-Y) | no standard statedannealed at a temperature its sheet does not state for a time its sheet does not stateannealedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 65°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | not in the median: annealed; the as-printed value is in it |
| Charpy impact strength XY | 38.7 ± 8.0 kJ/m2p. 1: Notched charpy impact strength (X-Y) Unnotched Impact Strength (X-Y) ISO 179-1: 2023 | ISO 179As the sheet prints it: ISO 179-1: 2023annealed at a temperature its sheet does not state for a time its sheet does not stateannealedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 65°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | not in the median: annealed; the as-printed value is in it |
| Charpy impact strength XY | 9.94±1.43 kJ/m²p. 1: Notched charpy impact strength (X-Y) | ISO 179As the sheet prints it: ISO 179-1: 2023 | not in the median: sold as toughened, set apart |
| Charpy impact strength Z | 10.3 ± 2.1 kJ/m2p. 1: Notched charpy impact strength (X-Y) Unnotched charpy impact strength (Z) | no standard statedas printedAs printedprint settingsPrinting temperature 230°C; Infill 100%; Bed temperature 65°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient | not in the median: unnotched |
| Charpy impact strength Z | 7.15±1.15 kJ/m²p. 1: Unnotched Impact Stength (Z) | ISO 179As the sheet prints it: ISO 179-1: 2023annealed at a temperature its sheet does not state for a time its sheet does not stateafter annealing | not in the median: annealed; the as-printed value is in it |
| HDT at 0.45 MPa | 56.3°Cp. 1: Heat deflection temp. 0.45MPa (as printed) | printed specimen (implied by the document), ISO 75As the sheet prints it: ISO 75-1: 2020; ISO 75-2: 2013; 0.45 MPa | in the median |
| HDT at 0.45 MPa | 107.6°Cp. 1: Heat deflection temp. 0.45MPa (annealed) | printed specimen (implied by the document), ISO 75As the sheet prints it: ISO 75-1: 2020; ISO 75-2: 2013; 0.45 MPaannealed at a temperature its sheet does not state for a time its sheet does not stateannealed | not in the median: annealed; the as-printed value is in it |
| HDT at 1.8 MPa | 53.8°Cp. 1: Heat deflection temp. 1.8MPa (as printed) | printed specimen (implied by the document), ISO 75As the sheet prints it: ISO 75-1: 2020; ISO 75-2: 2013; 1.8 MPa | in the median |
| HDT at 1.8 MPa | 68.6°Cp. 1: Heat deflection temp. 1.8MPa (annealed) | printed specimen (implied by the document), ISO 75As the sheet prints it: ISO 75-1: 2020; ISO 75-2: 2013; 1.8 MPaannealed at a temperature its sheet does not state for a time its sheet does not stateannealed | not in the median: annealed; the as-printed value is in it |
| Glass transition temperature | 59.15 °Cp. 1: Glass transition temp. | specimen not stated, no standard stated | in the median |
| Vicat softening temperature | 148.3 °Cp. 1: Vicat softening temp. ISO 306: 2022 | specimen not stated, ISO 306As the sheet prints it: ISO 306: 2022as printedAs printed | |
| Vicat softening temperature | 150.5°Cp. 1: Vicat softening temp. (annealed) | specimen not stated, ISO 306As the sheet prints it: ISO 306: 2022annealed at a temperature its sheet does not state for a time its sheet does not stateannealed | |
| Melting temperature | 173.35°Cp. 1: Melting temp. | specimen not stated, ISO 11357As the sheet prints it: ISO 11357-1: 2023; ISO 11357-3: 2025 | |
| Crystallization temperature | 129.98°Cp. 1: Crystallization temp. | specimen not stated, ISO 11357As the sheet prints it: ISO 11357-1: 2023; ISO 11357-3: 2025 | |
| Decomposition temperature | 320.14°Cp. 1: Decomposition temp. | specimen not stated, ISO 11358As the sheet prints it: ISO 11358-1: 2022 | |
| Density | 1.24 g/cm3p. 1: Density ISO 1183-1: 2015 | specimen not stated, ISO 1183As the sheet prints it: 1183-1: 2015 ISO 1183-1: 2015 | |
| Melt mass-flow rate | 24.43 g/10minp. 1: Melt index ISO 1133-1: 2022 210°C, 2.16kg | specimen not stated, ISO 1133As the sheet prints it: 1133-1: 2022 210°C 2.16kg ISO 1133-1: 2022 | |
Print settings
- Nozzle
- 230 °Cown data sheet
- Bed
- 25–65 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 60 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
- Annealing
- temperature not statedown data sheet
Its print profile, in the documents' words
- Nozzle 230°C; Bed 25-65°C; Chamber Not Needed; Drying 60°C/6HPolymaker, POLYMAKER™ HT-PLA Pro Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Build surface treatment; p. 1: Based on 0.4mm nozzle
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Good for
Polymaker™ HT-PLA Pro is a tough PLA engineered for functional parts that need to survive real-world use.
Polymaker, POLYMAKER™ HT-PLA Pro Technical Data Sheetp. 1 - Warping and shrinkage
Fast printing up to 300 mm/s, low warp and a consistent surface finish.
Polymaker, POLYMAKER™ HT-PLA Pro Technical Data Sheetp. 1 - Moisture sensitivity
It is highly recommended to use the PolyBox™ or PolyDryer™ Box when printing or storing Polymaker™ HT-PLA Pro.
Polymaker, POLYMAKER™ HT-PLA Pro Technical Data Sheetp. 1
Chemicals and environment (3)
- Post-processing: described in words
NOTE: For higher temp. resistance, you can anneal this material for 30 mins. @ 100°C.
Polymaker, POLYMAKER™ HT-PLA Pro Technical Data Sheetp. 1: Annealing note - Acid resistance: resistant
Good
Effect of weak acids · weakPolymaker, POLYMAKER™ HT-PLA Pro Technical Data Sheetp. 1: Effect of weak acids Good - Acid resistance: not resistant
Poor
Effect of strong acids · strongPolymaker, POLYMAKER™ HT-PLA Pro Technical Data Sheetp. 1: Effect of strong acids Poor
Polymaker PLA ProStrength XY, MPa39.9Strength Z, MPa25.4Modulus XY, GPa2.53Charpy notched, kJ/m²20.8HDT 0.45, °C58HDT 1.8, °C56Price, CAD/kg34Nozzle, °C210–230Bed, °C30–60Chamber, °CnoneDrying, °C, h556 h
Polymaker PLA ProPolymaker
Sold as toughened or impact-modified: "Engineered for high impact resistance and PLA-easy printability, it produces durable, high-quality parts fast, ideal for prototypes and end-use applications where speed and strength matter most." (Polymaker, Polymaker™ PLA Pro Technical Data Sheet, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Polymaker, Polymaker™ PLA Pro Technical Data Sheet23 values | |||
| Tensile modulus XY | 2531.08 ± 25.16 MPap. 1: Young’s modulus (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 60°C; Shell 2; Top & bottom layer 3; Cooling fan 100%; Environmental Temperature 24°C | in the median |
| Tensile modulus Z | 2265.58 ± 48.68 MPap. 1: Young’s modulus (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 60°C; Shell 2; Top & bottom layer 3; Cooling fan 100%; Environmental Temperature 24°C | in the median |
| Tensile strength (yield or break not stated) XY | 39.93 ± 0.44 MPap. 1: Tensile strength (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 60°C; Shell 2; Top & bottom layer 3; Cooling fan 100%; Environmental Temperature 24°C | in the median |
| Tensile strength (yield or break not stated) Z | 25.39 ± 0.45 MPap. 1: Tensile strength (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 60°C; Shell 2; Top & bottom layer 3; Cooling fan 100%; Environmental Temperature 24°C | in the median |
| Elongation at break XY | 16.57 ± 6.18 %p. 1: Elongation at break (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 60°C; Shell 2; Top & bottom layer 3; Cooling fan 100%; Environmental Temperature 24°C | in the median |
| Elongation at break Z | 3.05 ± 0.19 %p. 1: Elongation at break (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 60°C; Shell 2; Top & bottom layer 3; Cooling fan 100%; Environmental Temperature 24°C | in the median |
| Flexural modulus XY | 2438.41 ± 78.20 MPap. 1: Bending modulus (X-Y) | ISO 178, GB/T 9341print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 60°C; Shell 2; Top & bottom layer 3; Cooling fan 100%; Environmental Temperature 24°C | in the median |
| Flexural modulus Z | 2368.62 ± 61.58 MPap. 1: Bending modulus (Z) | ISO 178, GB/T 9341print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 60°C; Shell 2; Top & bottom layer 3; Cooling fan 100%; Environmental Temperature 24°C | in the median |
| Flexural strength XY | 62.12 ± 0.78 MPap. 1: Bending strength (X-Y) | ISO 178, GB/T 9341print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 60°C; Shell 2; Top & bottom layer 3; Cooling fan 100%; Environmental Temperature 24°C | in the median |
| Flexural strength Z | 49.96 ± 1.06 MPap. 1: Bending strength (Z) | ISO 178, GB/T 9341print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 60°C; Shell 2; Top & bottom layer 3; Cooling fan 100%; Environmental Temperature 24°C | in the median |
| Charpy impact strength XY | 20.76 ± 2.18 kJ/m2p. 1: Notched charpy impact strength (X-Y) ISO 179, GB/T 1043 | ISO 179, GB/T 1043print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 60°C; Shell 2; Top & bottom layer 3; Cooling fan 100%; Environmental Temperature 24°C | not in the median: sold as toughened, set apart |
| Charpy impact strength XY | 51.7 ± 4.58 kJ/m²p. 1: Un-notched charpy impact strength (X-Y) | ISO 179, GB/T 1043unnotched | not in the median: unnotched |
| Charpy impact strength Z | 21.7 ± 2.22 kJ/m²p. 1: Un-notched charpy impact strength (Z) | ISO 179, GB/T 1043unnotched | not in the median: unnotched |
| HDT at 0.45 MPa | 58.1°Cp. 1: Heat deflection temp. 0.45MPa | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | in the median |
| HDT at 1.8 MPa | 55.6°Cp. 1: Heat deflection temp. 1.8MPa | ISO 75As the sheet prints it: ISO 75; 1.8 MPa | in the median |
| Glass transition temperature | 58.3 °Cp. 1: Glass transition temp. DSC, 10°C/min | DSC | in the median |
| Vicat softening temperature | 63.5 °Cp. 1: Vicat softening temp. ISO 306, GB/T 1633 | ISO 306, GB/T 1633As the sheet prints it: 306 ISO 306 GB/T 1633 | |
| Melting temperature | 158.9°Cp. 1: Melting temp. | DSCAs the sheet prints it: DSC, 10°C/min; rate=10 °C/min | |
| Crystallization temperature | 113.3°Cp. 1: Crystalization temp. | DSCAs the sheet prints it: DSC, 10°C/min; rate=10 °C/min | |
| Decomposition temperature | 357.2°Cp. 1: Decomposition temp. | TGAAs the sheet prints it: TGA, 20°C/min; rate=20 °C/min | |
| Density | 1.237 g/cm3p. 1: Density ISO1183, GB/T 1033 | ISO 1183, GB/T 1033As the sheet prints it: 1183 ISO1183 GB/T 1033 | |
| Water absorption | 0.449 %p. 1: Equilibrium water absorption (%)= | no standard stated | |
| Melt mass-flow rate | 13.4 g/10minp. 1: Melt index 210°C, 2.16 kg | no standard namedAs the sheet prints it: 210°C 2.16 kg | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 30–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 55 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 210-230°C; Bed 30-60°C; Drying 55°C/6HPolymaker, Polymaker™ PLA Pro Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time; p. 1: Closure chamber; p. 1: Build surface treatment; p. 1: Based on 0.4mm nozzle
Price
34 CAD/kgits one regular price in the sample
1 listing
- Voxel Factory: 34 CAD/kgPolymaker PLA Pro 1.75mm 1kg / Black (SKU PMK-PLA-PRO-BLK-000)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (2)
- Good for
Engineered for high impact resistance and PLA-easy printability, it produces durable, high-quality parts fast, ideal for prototypes and end-use applications where speed and strength matter most.
Polymaker, Polymaker™ PLA Pro Technical Data Sheetp. 1 - Benefits
Polymaker™ PLA Pro combines exceptional toughness with fast print speeds to maximize productivity.
Polymaker, Polymaker™ PLA Pro Technical Data Sheetp. 1
Chemicals and environment (2)
- Acid resistance: limited
Fair
Effect of weak acids · weakPolymaker, Polymaker™ PLA Pro Technical Data Sheetp. 1: Effect of weak acids Fair - Acid resistance: not resistant
Poor
Effect of strong acids · strongPolymaker, Polymaker™ PLA Pro Technical Data Sheetp. 1: Effect of strong acids Poor
Bambu Lab PLA MatteStrength XY, MPa30Strength Z, MPa22Modulus XY, GPa1.96Charpy notched, kJ/m²—HDT 0.45, °C58HDT 1.8, °C52Price, CAD/kg28Nozzle, °C190–230Bed, °C35–45Chamber, °C25–45Drying, °C, h508 h
Bambu Lab PLA MatteBambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Matte20 valuesThe same values also in Bambu Lab, Technical Data Sheet V3.0 PLA Matte.Unless a row says otherwise: printed specimendryDried before testing (see preparation)as printedAll the specimens were annealed and dried at 55 °C for 8 h before testingprint settingsSpecimen Printing Conditions Subjects Data Nozzle Temperature 220 °C Bed Temperature 35 °C Printing Speed 200 mm/s Infill Density 100% *All the specimens were annealed and dried at 55 °C for 8 h before testing. And the suggested annealing temperature of models printed with Bambu PLA Matte is 50 to 60 °C, and the time is 6 to 12 hours. The annealing effect depends on the annea | |||
| Tensile modulus XY | 1960 ± 180 MPap. 2: Young's Modulus (X-Y)also in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 1670 ± 140 MPap. 2: Young's Modulus (Z)also in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 30 ± 5 MPap. 2: Tensile Strength (X-Y)also in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 22 ± 4 MPap. 2: Tensile Strength (Z)also in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 14.8 ± 4.2 %p. 2: Breaking Elongation Rate (X-Y)also in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 4.8 ±1.7 %p. 2: Breaking Elongation Rate (Z)also in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 2360 ± 250 MPap. 2: Bending Modulus (X-Y)also in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 1770 ± 210 MPap. 3: Bending Modulus (Z)also in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 53 ± 6 MPap. 3: Bending Strength (X-Y)also in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | ISO 178, GB/T 9341 | in the median |
| Flexural strength Z | 29 ± 5 MPap. 3: Bending Strength (Z)also in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 19.2 ± 3.7 kJ/m²p. 3: Impact Strength (X-Y) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Charpy impact strength Z | 6.6 ± 1.1 kJ/m²p. 3: Impact Strength (Z)also in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 58 °Cp. 2: Heat Deflection Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | ISO 75As the sheet prints it: ISO 75 0.45 MPa | in the median |
| HDT at 1.8 MPa | 52 °Cp. 2: Heat Deflection Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | ISO 75As the sheet prints it: ISO 75 1.8 MPa | in the median |
| Glass transition temperature | 61 °Cp. 2: Glass Transition Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | DSCAs the sheet prints it: DSC, 10 °C/min | in the median |
| Vicat softening temperature | 63 °Cp. 2: Vicar Softening Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | ISO 306, GB/T 1633 | |
| Melting temperature | 163 °Cp. 2: Melting Temperaturealso in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.31 g/cm³p. 2: Densityalso in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | specimen not stated, ISO 1183 | |
| Water absorption | 0.40 %p. 2: Saturatedalso in Bambu Lab, Technical Data Sheet V3.0 PLA Matte | no standard namedAs the sheet prints it: rated Water Absorption Rate 25 °C, 55% RH | |
| Melt mass-flow rate | 18.0 ± 3.2 g/10 minp. 2: Melt Index | specimen not stated, no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
| Also named without a value: crystallization temperature. | |||
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 35–45 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 50 °C for 8 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 190 - 230 °C; Bed 35 - 45 °C; Chamber 25 - 45 °C; Drying Blast Drying Oven: 50 °C, 8 hBambu Lab, Bambu Filament Technical Data Sheet - PLA MatteRecommended printing settings
- Nozzle 190 - 230 °C; Bed 35 - 45 °C; Chamber 25 - 45 °C; Drying Blast Drying Oven: 55 °C, 8 hBambu Lab, Technical Data Sheet V3.0 PLA Mattep. 1: Recommended printing settings: Nozzle Temperature; p. 1: Drying Settings before Printing: Blast Drying Oven
Price
28 CAD/kgthe median of its 2 regular prices in the sample
6 listings: 2 in its price, 3 with no regular price per kilogram recorded, 1 where a Canadian listing is used instead
- Bambu Lab Canada: 26 CAD/kgPLA Matte - Ivory White (11100) / Refill / 1kgin its price; seen 10 Sep 2026
- Bambu Lab Canada: 30 per kg, sale pricePLA Matte - Marine Blue (11600) / Filament with spool / 1kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
- Bambu Lab Canada: 26 per kg, sale pricePLA Matte - Bone White (11103) / Refill / 1kgnot used: no regular price per kilogram recorded; seen 10 Sep 2026
- 3D Printing Canada: 26 CAD/kgMatte Scarlet Red - Bambu Lab PLA Matte Filament - 1.75mm, 1kg / Refillnot used: a Canadian listing is used instead; seen 10 Sep 2026
- 3D Printing Canada: 30 CAD/kgMatte Scarlet Red - Bambu Lab PLA Matte Filament - 1.75mm, 1kg / Filament with spoolin its price; seen 10 Sep 2026
- 3D Printing Canada: 26 per kg, sale priceMatte Marine Blue - Bambu Lab PLA Matte Filament - 1.75mm, 1kg / Refillnot used: no regular price per kilogram recorded; seen 10 Sep 2026
Its 3 documents
What the maker says (7)
- Benefits
PLA is the most common material in 3D printing as it's easy to print and inexpensive.
Bambu Lab, Technical Data Sheet V3.0 PLA Mattep. 1 - Benefits
Meanwhile, its stiffness and strength can meet most printing needs.
Bambu Lab, Technical Data Sheet V3.0 PLA Mattep. 1 - Benefits
It is worth mentioning that it can biodegrade in some artificial composting conditions.
Bambu Lab, Technical Data Sheet V3.0 PLA Mattep. 1 - Benefits
Compared to general PLA, it can easily achieve printing speeds up to 250-300 mm/s, and endows the prints with matte finishes that look classic.
Bambu Lab, Technical Data Sheet V3.0 PLA Mattep. 1 - Surface finish
Bambu PLA Matte has a matte finish and is designed for high-speed printing.
Bambu Lab, Technical Data Sheet V3.0 PLA Mattep. 1 - Supports and removal
Support Material Support for PLA
Bambu Lab, Technical Data Sheet V3.0 PLA Mattep. 2 - Odour and emissions
Odor Odorless
Bambu Lab, Technical Data Sheet V3.0 PLA Mattep. 3
Specimen preparation (1)
All the specimens were annealed and dried at 55 °C for 8 h before testing
Bambu Lab, Bambu Filament Technical Data Sheet - PLA MatteTest specimen preparation
Chemicals and environment (7)
- Water solubility: insoluble
Insoluble in water
Bambu Lab, Bambu Filament Technical Data Sheet - PLA MatteSolubility - Acid resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA MatteResistance to Acid - Alkali resistance: not resistant
Not resistant
Bambu Lab, Bambu Filament Technical Data Sheet - PLA MatteResistance to Alkali - Organic solvent resistance: limited
Not resistant to some organic solvents
Bambu Lab, Bambu Filament Technical Data Sheet - PLA MatteResistance to Organic Solvent - Oil and grease resistance: limited
Resistant to most kinds of oil and grease
Bambu Lab, Bambu Filament Technical Data Sheet - PLA MatteResistance to Oil and Grease - Flammability: flammable
Flammable
Bambu Lab, Bambu Filament Technical Data Sheet - PLA MatteFlammability - Post-processing: described in words
the suggested annealing temperature of models printed with Bambu PLA Matte is 50 to 60 °C, and the time is 6 to 12 hours.
Bambu Lab, Bambu Filament Technical Data Sheet - PLA Mattep. 4: Annealing note
Bambu Lab PLA PureStrength XY, MPa51.5Strength Z, MPa30Modulus XY, GPa2.48Charpy notched, kJ/m²—HDT 0.45, °C60HDT 1.8, °C56Price, CAD/kg34Nozzle, °C190–230Bed, °C35–65Chamber, °C25–40Drying, °C, h508 h
Bambu Lab PLA PureBambu Lab
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Bambu Lab, TDS of Bambu PLA Pure15 valuesThe same values also in Bambu Lab, TDS of Bambu PLA Pure. | |||
| Tensile modulus XY | 2481 ± 20 MPap. 3: Young's Modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 2196 ± 25 MPap. 3: Young's Modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 30.0 ± 3 MPap. 3: Tensile Strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 5.6 ± 1.0 %p. 3: Breaking Elongation Rate (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 2.8 ± 0.5 %p. 3: Breaking Elongation Rate (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural strength Z | 55 ± 5 MPap. 3: Bending Strength (Z) | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength Z | 10.0 ± 0.7 kJ/m²p. 3: Impact Strength (Z) | ISO 179, GB/T 1043 | not in the median: notch not stated |
| HDT at 0.45 MPa | 60 °Cp. 2: Heat Deflection Temperature (60 °C) | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | in the median |
| HDT at 1.8 MPa | 56 °Cp. 2: Heat Deflection Temperature (56 °C) | ISO 75As the sheet prints it: ISO 75; 1.8 MPa | in the median |
| Glass transition temperature | 55 °Cp. 2: Glass Transition Temperature | DSCAs the sheet prints it: DSC; rate=10 °C/min | in the median |
| Vicat softening temperature | 63 °Cp. 2: Vicat Softening Temperature | ISO 306, GB/T 1633 | |
| Melting temperature | 160 °Cp. 2: Melting Temperature | DSCAs the sheet prints it: DSC; rate=10 °C/min | |
| Density | 1.24 g/cm3p. 2: Density ISO 1183also in Bambu Lab, TDS of Bambu PLA Pure | ISO 1183 | |
| Water absorption | 0.28%p. 2: Saturated Water Absorption Rate | no standard namedAs the sheet prints it: humidity=55 % RHafter moisture conditioning25 °C, 55% RH | |
| Melt mass-flow rate | 11.76 ± 1.6 g/10 minp. 2: Melt Index 210 °C, 2.16 kgalso in Bambu Lab, TDS of Bambu PLA Pure | no standard namedAs the sheet prints it: 210 °C 2.16 kg | |
| Bambu Lab, TDS of Bambu PLA Pure5 valuesUnless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 51.5 ± 2 MPap. 3: Tensile Strength (X-Y ISO 527, GB/T 1040 | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 2880 ± 100 MPap. 3: Bending Modulus (X-Y) ISO 178, GB/T 9341 | ISO 178, GB/T 9341 | in the median |
| Flexural modulus Z | 2599 ± 71 MPap. 3: Bending Modulus (Z) ISO 178, GB/T 9341 | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 75 ± 2 MPap. 3: Bending Strength (X-Y) ISO 178, GB/T 9341 | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength XY | 20.6 ± 0.7 kJ/m2p. 3: Impact Strength (X-Y) ISO 179, GB/T 1043 | ISO 179, GB/T 1043 | not in the median: notch not stated |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 35–65 °Cown data sheet
- Heated chamber
- 25–40 °Cown data sheet
- Drying
- 50 °C for 8 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 190 - 230°C; Bed 35 - 65 °C; Chamber 25 - 40 °C; Drying Blast Drying Oven: 50 °C, 8hBambu Lab, TDS of Bambu PLA Purep. 1: Bed Temperature, Chamber Temperature, Drying Settings before Printing, Nozzle Temperature; p. 1: Build Plate Type; p. 1: Drying Settings before Printing
- Nozzle 190 - 230 °C; Bed 35 - 65 °C; Chamber 25 - 40 °C; Drying Blast Drying Oven: 50 °C, 8 hBambu Lab, TDS of Bambu PLA Purep. 1: Drying Settings before Printing; p. 1: Nozzle Size; p. 1: Nozzle Temperature; p. 1: Build Plate Type; p. 1: Bed Temperature; p. 1: Chamber Temperature
Price
34 CAD/kgthe median of its 3 regular prices in the sample
4 listings: 3 in its price, 1 with no regular price per kilogram recorded
- 3D Printing Canada: 34 per kg, sale priceAbsolute Black - Bambu Lab PLA PURE Filament with Spool - 1.75mm, 1kg / Default Titlenot used: no regular price per kilogram recorded; seen 10 Sep 2026
- Shop3D.ca: 34 CAD/kgBambu Lab - PLA Pure (1.75mm) 1kg / Absolute Black (SKU A19-K00-1.75-1000-SPL)in its price; seen 30 Sep 2026
- DigitMakers: 22 CAD/kgBambu Lab PLA Pure Refill 1.75mm - 1kg (Various Colors) / Absolute Black (17101) (SKU A19-K00-1.75-1000-SPLFREE)in its price; seen 30 Sep 2026
- 3D Printing Canada: 34 CAD/kgBaby blue - Bambu Lab PLA PURE Filament with Spool - 1.75mm, 1kg (SKU 6a989b85d4f5f)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (3)
- Odour and emissions
cleaner Ingredients, and noticeably lower emissions while It prints.
Bambu Lab, TDS of Bambu PLA Purep. 1 - Supports and removal
support Support for PLA
Bambu Lab, TDS of Bambu PLA Purep. 1 - Odour and emissions
Odor Odorless
Bambu Lab, TDS of Bambu PLA Purep. 3
Polymaker PolyLite CosPLA Version AStrength XY, MPa31.1Strength Z, MPa16.7Modulus XY, GPa2.25Charpy notched, kJ/m²5.9HDT 0.45, °C58HDT 1.8, °C56Price, CAD/kg—Nozzle, °C190–230Bed, °C25–60Chamber, °CnoneDrying, °C, h556 h
Polymaker PolyLite CosPLA Version APolymaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Polymaker, Polymaker™ PolyLite™ CosPLA Version A Technical Data Sheet17 values | |||
| Tensile modulus XY | 2245.9 ± 90.7 MPap. 1: Young’s modulus (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Tensile modulus Z | 1781.2 ± 53.2 MPap. 1: Young’s modulus (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Tensile strength (yield or break not stated) XY | 31.1 ± 0.8 MPap. 1: Tensile strength (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Tensile strength (yield or break not stated) Z | 16.7 ± 0.4 MPap. 1: Tensile strength (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Elongation at break XY | 13.8 ± 2.9 %p. 1: Elongation at break (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Elongation at break Z | 1.1 ± 0.1 %p. 1: Elongation at break (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Flexural modulus XY | 2441.9 ± 77.5 MPap. 1: Bending modulus (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Flexural strength XY | 58.7 ± 1.0 MPap. 1: Bending strength (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Charpy impact strength XY | 5.9 ± 0.5 kJ/m2p. 1: Notched charpy impact strength (X-Y) ISO 179, GB/T 1043 | ISO 179, GB/T 1043print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| HDT at 0.45 MPa | 58°Cp. 1: Heat deflection temp. 0.45MPa | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | in the median |
| HDT at 1.8 MPa | 56°Cp. 1: Heat deflection temp. 1.8MPa | ISO 75As the sheet prints it: ISO 75; 1.8 MPa | in the median |
| Glass transition temperature | 59 °Cp. 1: Glass transition temp. DSC, 10°C/min | DSC | in the median |
| Vicat softening temperature | 62 °Cp. 1: Vicat softening temp. ISO 306, GB/T 1633 | ISO 306, GB/T 1633As the sheet prints it: 306 ISO 306 GB/T 1633 | |
| Melting temperature | 161°Cp. 1: Melting temp. | DSCAs the sheet prints it: DSC, 10°C/min; rate=10 °C/min | |
| Density | 1.24 g/cm3p. 1: Density ISO1183, GB/T1033 | ISO 1183, GB/T 1033As the sheet prints it: 1183 ISO1183 GB/T1033 | |
| Water absorption | 0.41%p. 1: Equilibrium Water Absorption Rate | no standard namedAs the sheet prints it: RH=70%after moisture conditioning70% RH 23°C | |
| Melt mass-flow rate | 8 g/10minp. 1: Melt index 210°C, 2.16kg | no standard namedAs the sheet prints it: 210°C 2.16kg | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 55 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-230°C; Bed 25-60°C; Drying 55°C/6HPolymaker, Polymaker™ PolyLite™ CosPLA Version A Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time; p. 1: Closure chamber; p. 1: Build surface treatment; p. 1: Based on 0.4mm nozzle
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Good for
PolyLite™ CosPLA is a special PLA formula designed for cosplay props application.
Polymaker, Polymaker™ PolyLite™ CosPLA Version A Technical Data Sheetp. 1 - Surface finish
It has been enhanced for ease of sanding, durability and paint-ability.
Polymaker, Polymaker™ PolyLite™ CosPLA Version A Technical Data Sheetp. 1
Chemicals and environment (2)
- Acid resistance: resistant
Good
Effect of weak acids · weakPolymaker, Polymaker™ PolyLite™ CosPLA Version A Technical Data Sheetp. 1: Effect of weak acids Good - Acid resistance: not resistant
Poor
Effect of strong acids · strongPolymaker, Polymaker™ PolyLite™ CosPLA Version A Technical Data Sheetp. 1: Effect of strong acids Poor
Polymaker PolyLite CosPLA Version BStrength XY, MPa49.8Strength Z, MPa36.5Modulus XY, GPa2.93Charpy notched, kJ/m²17.1HDT 0.45, °C59HDT 1.8, °C58Price, CAD/kg—Nozzle, °C190–220Bed, °C30–60Chamber, °C0–40Drying, °C, h556 h
Polymaker PolyLite CosPLA Version BPolymaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Polymaker, Polymaker PolyLite CosPLA Version B17 valuesThe same values also in Polymaker, TECHNICAL DATA SHEET Polymaker™ PolyLite™ CosPLA. | |||
| Tensile modulus XY | 2932.2 ± 55.3 MPap. 4: Young’s modulus (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100 %; Environmental temperature 25 ˚C; Cooling fan ON | in the median |
| Tensile modulus Z | 2633.0 ± 117.4 MPap. 4: Young’s modulus (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100 %; Environmental temperature 25 ˚C; Cooling fan ON | in the median |
| Tensile strength (yield or break not stated) XY | 49.8 ± 0.4 MPap. 4: Tensile strength (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100 %; Environmental temperature 25 ˚C; Cooling fan ON | in the median |
| Tensile strength (yield or break not stated) Z | 36.5 ± 0.6 MPap. 4: Tensile strength (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100 %; Environmental temperature 25 ˚C; Cooling fan ON | in the median |
| Elongation at break XY | 6.3 ± 0.9 %p. 4: Elongation at break (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100 %; Environmental temperature 25 ˚C; Cooling fan ON | in the median |
| Elongation at break Z | 2.4 ± 0.3 %p. 4: Elongation at break (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100 %; Environmental temperature 25 ˚C; Cooling fan ON | in the median |
| Flexural modulus XY | 2933.8 ± 78.3 MPap. 4: Bending modulus (X-Y) | ISO 178, GB/T 9341print settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100 %; Environmental temperature 25 ˚C; Cooling fan ON | in the median |
| Flexural strength XY | 77.9 ± 0.4 MPap. 4: Bending strength (X-Y) | ISO 178, GB/T 9341print settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100 %; Environmental temperature 25 ˚C; Cooling fan ON | in the median |
| Charpy impact strength XY | 17.1 ± 1.2 kJ/m2p. 4: Charpy impact strength (X-Y) | ISO 179, GB/T 1043notchedprint settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100 %; Environmental temperature 25 ˚C; Cooling fan ON | in the median |
| HDT at 0.45 MPa | 59.3 °Cp. 3: Heat deflection temperature ISO 75 0.45MPa | ISO 75As the sheet prints it: 0.45MPa ISO 75 | not in the median: another value of this product is in it |
| HDT at 1.8 MPa | 57.6 °Cp. 3: Heat deflection temperature ISO 75 1.8MPa | ISO 75As the sheet prints it: 1.8MPa ISO 75 | not in the median: another value of this product is in it |
| Glass transition temperature | 62 °Cp. 3: Glass transition temperature DSC, 10°C/min | DSC | in the median |
| Vicat softening temperature | 62.7 °Cp. 3: Vicat softening temperature ISO 306, GB/T 1633 | ISO 306, GB/T 1633 | |
| Melting temperature | 150 °Cp. 3: Melting temperature DSC, 10°C/min | DSC | |
| Density | 1.22 g/cm3p. 2: Density ISO1183, GB/T1033also in Polymaker, TECHNICAL DATA SHEET Polymaker™ PolyLite™ CosPLA | ISO 1183, GB/T 1033 | |
| Water absorption | 0.291 %p. 2: Equilibrium water absorptionalso in Polymaker, TECHNICAL DATA SHEET Polymaker™ PolyLite™ CosPLA | no standard stated | |
| Melt mass-flow rate | 6 g/10minp. 2: Melt index 210°C, 2.16 kg | no standard namedAs the sheet prints it: 210°C 2.16 kg | |
| Polymaker, TECHNICAL DATA SHEET Polymaker™ PolyLite™ CosPLA3 valuesUnless a row says otherwise: printed specimen (implied by the document) | |||
| HDT at 0.45 MPa | 59°Cp. 1: Heat deflection temp. (ISO 75 0.45MPa) | ISO 75As the sheet prints it: ISO 75 0.45MPa | in the median |
| HDT at 1.8 MPa | 58°Cp. 1: Heat deflection temp. (ISO 75 1.8MPa) | ISO 75As the sheet prints it: ISO 75 1.8MPa | in the median |
| Vicat softening temperature | 63°Cp. 1: Vicat softening temp. | specimen not stated, ISO 306, GB/T 1633 | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 30–60 °Cown data sheet
- Heated chamber
- 0–40 °Cown data sheet
- Drying
- 55 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 190 – 220 (℃); Bed 30 - 60 (°C); Chamber 0 - 40 (˚C)Polymaker, Polymaker PolyLite CosPLA Version Bp. 4: Recommended printing settings: Nozzle temperature; p. 4: Environmental temperature
- Nozzle 190-230°C; Bed 30-60°C; Drying 55°C/6HPolymaker, TECHNICAL DATA SHEET Polymaker™ PolyLite™ CosPLAp. 1: Nozzle temperature, Build plate temperature, Closure chamber; p. 1: Build surface treatment; p. 1: *Based on 0.4mm nozzle
Price
Not in the price sample.
Its 3 documents
What the maker says (5)
- Good for
PolyLite™ CosPLA is a special PLA formula designed for cosplay props application.
Polymaker, TECHNICAL DATA SHEET Polymaker™ PolyLite™ CosPLAp. 1 - Surface finish
It has been enhanced for ease of sanding, durability and paint-ability.
Polymaker, TECHNICAL DATA SHEET Polymaker™ PolyLite™ CosPLAp. 1 - Good for
PolyLite™ CosPLA is a special PLA formula designed for cosplay props application.
Polymaker, Polymaker PolyLite CosPLA Version Bp. 2 - Surface finish
It has been enhanced for ease of sanding, durability and paint-ability.
Polymaker, Polymaker PolyLite CosPLA Version Bp. 2 - Supports and removal
Recommended support material PolySupport™ and PolyDissolve™ S1
Polymaker, Polymaker PolyLite CosPLA Version Bp. 4
Chemicals and environment (4)
- Acid resistance: not resistant
Not resistant
Effect of weak acids · weakPolymaker, Polymaker PolyLite CosPLA Version Bp. 2: Effect of weak acids Not resistant - Acid resistance: not resistant
Not resistant
Effect of strong acids · strongPolymaker, Polymaker PolyLite CosPLA Version Bp. 2: Effect of strong acids Not resistant - Acid resistance: resistant
Good
Effect of weak acids · weakPolymaker, TECHNICAL DATA SHEET Polymaker™ PolyLite™ CosPLAp. 1: Effect of weak acids Good - Acid resistance: not resistant
Poor
Effect of strong acids · strongPolymaker, TECHNICAL DATA SHEET Polymaker™ PolyLite™ CosPLAp. 1: Effect of strong acids Poor
Polymaker PolyLite PLA ProStrength XY, MPa49.8Strength Z, MPa36.5Modulus XY, GPa2.93Charpy notched, kJ/m²17.1HDT 0.45, °C59HDT 1.8, °C58Price, CAD/kg—Nozzle, °C190–230Bed, °C30–60Chamber, °CnoneDrying, °C, h556 h
Polymaker PolyLite PLA ProPolymaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Polymaker, PolyLite™ PLA Pro Technical Data Sheet17 values | |||
| Tensile modulus XY | 2932.2 ± 55.3 MPap. 1: Young’s modulus (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Tensile modulus Z | 2633.0 ± 117.4 MPap. 1: Young’s modulus (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Tensile strength (yield or break not stated) XY | 49.8 ± 0.4 MPap. 1: Tensile strength (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Tensile strength (yield or break not stated) Z | 36.5 ± 0.6 MPap. 1: Tensile strength (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Elongation at break XY | 6.3 ± 0.9 %p. 1: Elongation at break (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Elongation at break Z | 2.4 ± 0.3 %p. 1: Elongation at break (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Flexural modulus XY | 2933.8 ± 78.3 MPap. 1: Bending modulus (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Flexural strength XY | 77.9 ± 0.4 MPap. 1: Bending strength (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Charpy impact strength XY | 17.1 ± 1.2 kJ/m2p. 1: Notched charpy impact strength (X-Y) | ISO 179, GB/T 1043print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| HDT at 0.45 MPa | 59°Cp. 1: Heat deflection temp. 0.45MPa | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | in the median |
| HDT at 1.8 MPa | 58°Cp. 1: Heat deflection temp. 1.8MPa | ISO 75As the sheet prints it: ISO 75; 1.8 MPa | in the median |
| Glass transition temperature | 62 °Cp. 1: Glass transition temp. DSC, 10°C/min | DSC | in the median |
| Vicat softening temperature | 63 °Cp. 1: Vicat softening temp. ISO 306, GB/T 1633 | ISO 306, GB/T 1633As the sheet prints it: 306 ISO 306 GB/T 1633 | |
| Melting temperature | 150°Cp. 1: Melting temp. | DSCAs the sheet prints it: DSC, 10°C/min; rate=10 °C/min | |
| Density | 1.23 g/cm3p. 1: Density ISO1183, GB/T 1033 | ISO 1183, GB/T 1033As the sheet prints it: 1183 ISO1183 GB/T 1033 | |
| Water absorption | 0.291 %p. 1: Equilibrium water absorption (%)= | no standard stated | |
| Melt mass-flow rate | 15.5 g/10minp. 1: Melt index 210°C, 2.16 kg | no standard namedAs the sheet prints it: 210°C 2.16 kg | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 30–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 55 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-230°C; Bed 30-60°C; Drying 55°C/6HPolymaker, PolyLite™ PLA Pro Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time; p. 1: Closure chamber; p. 1: Build surface treatment; p. 1: Based on 0.4mm nozzle
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- DigitMakers: 28.8 per kg, sale pricePolyLite™ PLA Pro - 1.75mm 1kg / Black (SKU PLMK-FL-PLITE-PLA-PRO-1.75-1000G-BLK)not used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 2 documents
What the maker says (1)
- Benefits
Polylite™ PLA Pro is a first of its kind combining high toughness and high rigidity, this professional PLA offers engineering properties with the ease of print of regular PLA.
Polymaker, PolyLite™ PLA Pro Technical Data Sheetp. 1
Chemicals and environment (2)
- Acid resistance: resistant
Good
Effect of weak acids · weakPolymaker, PolyLite™ PLA Pro Technical Data Sheetp. 1: Effect of weak acids Good - Acid resistance: not resistant
Poor
Effect of strong acids · strongPolymaker, PolyLite™ PLA Pro Technical Data Sheetp. 1: Effect of strong acids Poor
Polymaker PolyMax PLAStrength XY, MPa41.3Strength Z, MPa32.4Modulus XY, GPa2.15Charpy notched, kJ/m²38.9HDT 0.45, °C55HDT 1.8, °C52Price, CAD/kg—Nozzle, °C190–230Bed, °C25–60Chamber, °CnoneDrying, °C, h556 h
Polymaker PolyMax PLAPolymaker
Sold as toughened or impact-modified: "has an impact resistance significantly higher than regular PLA, and better overall mechanical properties than ABS." (Polymaker, PolyMax PLA Technical Data Sheet, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Polymaker, PolyMax™ PLA Technical Data Sheet18 valuesThe same values also in Polymaker, PolyMax PLA Technical Data Sheet. | |||
| Tensile modulus XY | 2150.8 ± 67.8 MPap. 1: Young’s modulus (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Tensile modulus Z | 1983.6 ± 50.1 MPap. 1: Young’s modulus (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Tensile strength (yield or break not stated) XY | 41.3 ± 2.2 MPap. 1: Tensile strength (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Tensile strength (yield or break not stated) Z | 32.4 ± 1.2 MPap. 1: Tensile strength (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Elongation at break XY | 5.7 ± 0.8 %p. 1: Elongation at break (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Elongation at break Z | 4.7 ± 1.2 %p. 1: Elongation at break (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Flexural modulus XY | 2393.2 ± 195.2 MPap. 1: Bending modulus (X-Y) | ISO 178, GB/T 9341print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Flexural strength XY | 62.0 ± 0.9 MPap. 1: Bending strength (X-Y) | ISO 178, GB/T 9341print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | in the median |
| Charpy impact strength XY | 38.9 ± 2.4 kJ/m2p. 1: Notched charpy impact strength (X-Y) | ISO 179, GB/T 1043print settingsPrinting temperature 230°C; Infill 100%; Bed temperature 50°C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental Temperature Ambient temp. | not in the median: sold as toughened, set apart |
| HDT at 0.45 MPa | 55°Cp. 1: Heat deflection temp. 0.45MPa | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | in the median |
| HDT at 1.8 MPa | 52°Cp. 1: Heat deflection temp. 1.8MPa | ISO 75As the sheet prints it: ISO 75; 1.8 MPa | in the median |
| Glass transition temperature | 61 °Cp. 1: Glass transition temp. DSC, 10°C/min | DSC | in the median |
| Vicat softening temperature | 62 °Cp. 1: Vicat softening temp. ISO 306, GB/T 1633 | ISO 306, GB/T 1633As the sheet prints it: 306 ISO 306 GB/T 1633 | |
| Melting temperature | 149°Cp. 1: Melting temp. | DSCAs the sheet prints it: DSC, 10°C/min; rate=10 °C/min | |
| Crystallization temperature | 112°Cp. 1: Crystalization temp. | DSCAs the sheet prints it: DSC, 10°C/min; rate=10 °C/min | |
| Density | 1.17-1.24 g/cm3p. 1: Density ISO1183, GB/T 1033 | ISO 1183, GB/T 1033As the sheet prints it: 1183 ISO1183 GB/T 1033 | |
| Water absorption | 0.51 %p. 1: Equilibrium water absorption (%)= | no standard stated | |
| Melt mass-flow rate | 5-8 g/10minp. 1: Melt index 210°C, 2.16kgalso in Polymaker, PolyMax PLA Technical Data Sheet | no standard namedAs the sheet prints it: 210°C 2.16kg | |
| Polymaker, PolyMax PLA Technical Data Sheet5 values | |||
| Tensile modulus orientation not stated | 1879 ± 109 MPap. 1: Young’s modulus (MPa) | ASTM D638, ISO 527, GB/T 1040print settingsprinted using a MakerBot Replicator 2; Printing temperature = 200 °C, printing speed = 90 mm/s, number of shells = 2, 100% infill | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) orientation not stated | 28.1 ± 1.3 MPap. 1: Tensile strength (MPa) | ASTM D638, ISO 527, GB/T 1040print settingsprinted using a MakerBot Replicator 2; Printing temperature = 200 °C, printing speed = 90 mm/s, number of shells = 2, 100% infill | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 1.36 ± 0.30 %p. 1: Elongation at break (%) | ASTM D638, ISO 527, GB/T 1040print settingsprinted using a MakerBot Replicator 2; Printing temperature = 200 °C, printing speed = 90 mm/s, number of shells = 2, 100% infill | not in the median: another value of this product is in it |
| Glass transition temperature | 50 - 60 °Cp. 1: Glass transition temperature (°C) | DSCAs the sheet prints it: DSC, 10 °C/min; rate=10 °C/min | not in the median: another value of this product is in it |
| Moisture content | 0.1 %p. 1: Moisture content (%) Thermogravimetric | no standard stated | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 55 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 190-230°C; Bed 25-60°C; Drying 55°C/6HPolymaker, PolyMax™ PLA Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time; p. 1: Closure chamber; p. 1: Build surface treatment; p. 1: Based on 0.4mm nozzle
- No temperature statedPolymaker, PolyMax PLA Technical Data Sheetp. 1: the conditions the test specimens were printed under, which are not printing guidance
Price
Not in the price sample.
Its 3 documents
What the maker says (3)
- Benefits
PolyMax™ PLA is an incredibly easy-to-print filament with improved mechanical properties, making it an excellent alternative to ABS.
Polymaker, PolyMax™ PLA Technical Data Sheetp. 1 - Benefits
has an impact resistance significantly higher than regular PLA, and better overall mechanical properties than ABS.
Polymaker, PolyMax PLA Technical Data Sheetp. 1 - Odour and emissions
Odor / Almost odorless
Polymaker, PolyMax PLA Technical Data Sheetp. 1
Chemicals and environment (2)
- Acid resistance: resistant
Good
Effect of weak acids · weakPolymaker, PolyMax™ PLA Technical Data Sheetp. 1: Effect of weak acids Good - Acid resistance: not resistant
Poor
Effect of strong acids · strongPolymaker, PolyMax™ PLA Technical Data Sheetp. 1: Effect of strong acids Poor
Polymaker PolySonic PLAStrength XY, MPa46Strength Z, MPa37.3Modulus XY, GPa2.88Charpy notched, kJ/m²6.1HDT 0.45, °C53HDT 1.8, °C52Price, CAD/kg—Nozzle, °C190–210Bed, °C30–60Chamber, °CnoneDrying, °C, h556 h
Polymaker PolySonic PLAPolymaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Polymaker, PolySonic™ PLA18 valuesThe same values also in Polymaker, PolySonic™ PLA Technical Data Sheet.Unless a row says otherwise: printed specimenprint settingsHigh printing speed 300 mm/s, printing temperature 230 °C, 0.4 mm nozzle, 0.2 mm layers; bed 25 °C, 2 shells, 3 top and bottom layers, 100% infill, cooling fan on (p. 3, p. 6) | |||
| Tensile modulus XY | 2649.7 ± 78.3 MPap. 3: Young’s modulus (X-Y) | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | not in the median: another value of this product is in it |
| Tensile modulus Z | 2433.4 ± 79.4 MPap. 3: Young’s modulus (Z) | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) XY | 43.9 ± 0.4 MPap. 3: Tensile strength (X-Y) | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) Z | 32.4 ± 0.4 MPap. 3: Tensile strength (Z) | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | not in the median: another value of this product is in it |
| Elongation at break XY | 21.5 ± 5.02 %p. 3: Elongation at break (X-Y) | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | not in the median: another value of this product is in it |
| Elongation at break XY | 15.1 ± 3.9 %p. 3: Elongation at break (X-Y) | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | not in the median: another value of this product is in it |
| Elongation at break Z | 3.3 ± 0.5 %p. 3: Elongation at break (Z) | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testing | not in the median: another value of this product is in it |
| Flexural modulus XY | 2797.9 ± 40.7 MPap. 3: Bending modulus (X-Y) | ISO 178, GB/T 9341moistureAll specimens were conditioned at room temperature for 24h prior to testing | not in the median: another value of this product is in it |
| Flexural strength XY | 71.4 ± 0.6 MPap. 3: Bending strength (X-Y) | ISO 178, GB/T 9341moistureAll specimens were conditioned at room temperature for 24h prior to testing | not in the median: another value of this product is in it |
| Charpy impact strength XY | 6.1 ± 0.6 kJ/m2p. 3: Charpy impact strength (X-Y)also in Polymaker, PolySonic™ PLA Technical Data Sheet | ISO 179, GB/T 1043moistureAll specimens were conditioned at room temperature for 24h prior to testing | in the median |
| Charpy impact strength XY | 5.0 ± 0.5 kJ/m2p. 3: Charpy impact strength (X-Y)also in Polymaker, PolySonic™ PLA Technical Data Sheet | ISO 179, GB/T 1043moistureAll specimens were conditioned at room temperature for 24h prior to testing | not in the median: another value of this product is in it |
| HDT at 0.45 MPa | 53 °Cp. 3: Heat deflection temperature | ISO 75As the sheet prints it: ISO 75 0.45MPa | in the median |
| HDT at 1.8 MPa | 52 °Cp. 3: Heat deflection temperature | ISO 75As the sheet prints it: ISO 75 1.8MPa | in the median |
| Vicat softening temperature | 61 °Cp. 3: Vicat softening temperaturealso in Polymaker, PolySonic™ PLA Technical Data Sheet | ISO 306, GB/T 1633 | |
| Melting temperature | 164 °Cp. 3: Melting temperature | DSCAs the sheet prints it: DSC, 10°C/min | |
| Crystallization temperature | 96 °Cp. 3: Crystallization temperature | DSCAs the sheet prints it: DSC, 10°C/min | |
| Density | 1.23 g/cm3p. 2: Densityalso in Polymaker, PolySonic™ PLA Technical Data Sheet | specimen not stated, ISO 1183, GB/T 1033 | |
| Water absorption | 0.40 %p. 2: Equilibrium water absorption (%)also in Polymaker, PolySonic™ PLA Technical Data Sheet | specimen not stated, no standard namedAs the sheet prints it: Equilibrium water absorption | |
| Also named without a value: flexural modulus, flexural strength, charpy impact strength, thermal conductivity. | |||
Polymaker, PolySonic™ PLA Technical Data Sheet11 valuesThe same values also in Polymaker, PolySonic™ PLA.Unless a row says otherwise: printed specimenprint settingsPrinting temperature 210 °C/230 °C; Infill 100%; Bed temperature 50 °C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental temperature Ambient | |||
| Tensile modulus XY | 2878.3 ± 74.3 MPap. 1: Young’s modulus (X-Y)also in Polymaker, PolySonic™ PLA | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 2689.8 ± 92.0 MPap. 1: Young’s modulus (Z)also in Polymaker, PolySonic™ PLA | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 46.0 ± 0.5 MPap. 1: Tensile strength (X-Y)also in Polymaker, PolySonic™ PLA | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 37.3 ± 0.7 MPap. 1: Tensile strength (Z)also in Polymaker, PolySonic™ PLA | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 21.5 ± 5.1 %p. 1: Elongation at break (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 4.2 ± 2.0 %p. 1: Elongation at break (Z)also in Polymaker, PolySonic™ PLA | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 2868.2 ± 78.4 MPap. 1: Bending modulus (X-Y)also in Polymaker, PolySonic™ PLA | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 76.5 ± 0.9 MPap. 1: Bending strength (X-Y)also in Polymaker, PolySonic™ PLA | ISO 178, GB/T 9341 | in the median |
| Glass transition temperature | 59 °Cp. 1: Glass transition temp. DSC, 10°C/minalso in Polymaker, PolySonic™ PLA | DSCprint settings not stated | in the median |
| Decomposition temperature | 370 °Cp. 1: Decomposition temp. | TGAAs the sheet prints it: TGA, 20°C/min; rate=20 °C/min | |
| Melt mass-flow rate | 15.4 g/10minp. 1: Melt index 210°C, 2.16kg | specimen not stated, no standard namedAs the sheet prints it: 210°C 2.16kg | |
Print settings
- Nozzle
- 190–210 °Cown data sheet
- Bed
- 30–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 55 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 4 print profiles, in the documents' words
- Nozzle Classic :190-210 °C; Bed 30 - 60 (˚C); Chamber Not required (Closure Chamber: No needed); Drying 55˚C for 6hPolymaker, PolySonic™ PLARecommended printing settings; p. 4: Drying setting
- Nozzle Classic: 190-210 °C; Bed 30 - 60 (˚C); Drying 55˚C for 6hPolymaker, PolySonic™ PLA Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time; p. 1: Closure chamber; p. 1: Build surface treatment; p. 1: *Based on 0.4mm nozzle
- Nozzle High-speed: 210-230 °C; Bed 30 - 60 (˚C); Drying 55˚C for 6hPolymaker, PolySonic™ PLA Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature, High-speed; p. 1: Build surface treatment; p. 1: *Based on 0.4mm nozzle
- Nozzle High-speed: 210-230 °C; Bed 30 - 60 (˚C); Chamber Not required (Closure Chamber: No needed); Drying 55˚C for 6hPolymaker, PolySonic™ PLARecommended printing settings: Nozzle temperature, High-speed
Price
Not in the price sample.
Its 3 documents
What the maker says (3)
- Adhesion between layers
With its lightning-fast extrusion rate, cutting-edge precision, and exceptional layer adhesion you can ramp up the speed of your 3D printer and witness new levels of productivity.
Polymaker, PolySonic™ PLAp. 2 - Supports and removal
Recommended support material PolySupport™ and PolyDissolve™ S1
Polymaker, PolySonic™ PLAp. 4 - Adhesion between layers
With its lightning-fast extrusion rate, cutting-edge precision, and exceptional layer adhesion you can ramp up the speed of your 3D printer and witness new levels of productivity.
Polymaker, PolySonic™ PLA Technical Data Sheetp. 1
Chemicals and environment (6)
- Acid resistance: not resistant
Not resistant
Effect of weak acids · weakPolymaker, PolySonic™ PLAEffect of weak acids - Acid resistance: not resistant
Not resistant
Effect of strong acids · strongPolymaker, PolySonic™ PLAEffect of strong acids - Alkali resistance: not resistant
Not resistant
Effect of weak alkalis · weakPolymaker, PolySonic™ PLAEffect of weak alkalis - Alkali resistance: not resistant
Not resistant
Effect of strong alkalis · strongPolymaker, PolySonic™ PLAEffect of strong alkalis - Organic solvent resistance: no data
No data available
Effect of organic solventPolymaker, PolySonic™ PLAEffect of organic solvent - Oil and grease resistance: no data
No data available
Effect of oils and greasePolymaker, PolySonic™ PLAEffect of oils and grease
Polymaker PolySonic PLA Pro 6.0Strength XY, MPa41.2Strength Z, MPa33.6Modulus XY, GPa2.36Charpy notched, kJ/m²22.7HDT 0.45, °C55HDT 1.8, °C52Price, CAD/kg—Nozzle, °C190–210Bed, °C30–60Chamber, °CnoneDrying, °C, h556 h
Polymaker PolySonic PLA Pro 6.0Polymaker
Sold as toughened or impact-modified: "PolySonic™ PLA PRO is a tough PLA that can print at incredible speeds." (Polymaker, PolySonic™ PLA PRO Technical Data Sheet, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Polymaker, PolySonic™ PLA PRO Technical Data Sheet23 values | |||
| Tensile modulus XY | 2360.0 ± 30.1 MPap. 1: Young’s modulus (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 210 °C/230 °C; Infill 100%; Bed temperature 50 °C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental temperature Ambient | in the median |
| Tensile modulus XY | 2305.7 ± 42.9 MPa | ISO 527, GB/T 1040As the sheet prints it: ISO 527, GB/T 1040; mode=High speed; print speed=300 mm/s; printing temperature=230 °C; nozzle=0.4 mm; layer=0.2 mm | not in the median: another value of this product is in it |
| Tensile modulus Z | 2283.3 ± 32.1 MPap. 1: Young’s modulus (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 210 °C/230 °C; Infill 100%; Bed temperature 50 °C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental temperature Ambient | in the median |
| Tensile strength (yield or break not stated) XY | 41.2 ± 0.6 MPap. 1: Tensile strength (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 210 °C/230 °C; Infill 100%; Bed temperature 50 °C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental temperature Ambient | in the median |
| Tensile strength (yield or break not stated) XY | 39.3 ± 0.5 MPa | ISO 527, GB/T 1040As the sheet prints it: ISO 527, GB/T 1040; mode=High speed; print speed=300 mm/s; printing temperature=230 °C; nozzle=0.4 mm; layer=0.2 mm | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) Z | 33.6 ± 0.5 MPap. 1: Tensile strength (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 210 °C/230 °C; Infill 100%; Bed temperature 50 °C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental temperature Ambient | in the median |
| Elongation at break XY | 23.4 ± 6.3 %p. 1: Elongation at break (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 210 °C/230 °C; Infill 100%; Bed temperature 50 °C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental temperature Ambient | in the median |
| Elongation at break XY | 17.9 ± 5.2 % | ISO 527, GB/T 1040As the sheet prints it: ISO 527, GB/T 1040; mode=High speed; print speed=300 mm/s; printing temperature=230 °C; nozzle=0.4 mm; layer=0.2 mm | not in the median: another value of this product is in it |
| Elongation at break Z | 4.9 ± 1.1 %p. 1: Elongation at break (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 210 °C/230 °C; Infill 100%; Bed temperature 50 °C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental temperature Ambient | in the median |
| Flexural modulus XY | 2688.7 ± 26.1 MPap. 1: Bending modulus (X-Y) | ISO 178, GB/T 9341print settingsPrinting temperature 210 °C/230 °C; Infill 100%; Bed temperature 50 °C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental temperature Ambient | in the median |
| Flexural strength XY | 67.5 ± 0.7 MPap. 1: Bending strength (X-Y) | ISO 178, GB/T 9341print settingsPrinting temperature 210 °C/230 °C; Infill 100%; Bed temperature 50 °C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental temperature Ambient | in the median |
| Charpy impact strength XY | 22.7 ± 2.5 kJ/m²p. 1: Charpy impact strength (X-Y) notched (MECHANICAL PROPERTIES - Classic Speed) | ISO 179, GB/T 1043As the sheet prints it: ISO 179, GB/T 1043; mode=Classic; print speed=46.7 mm/s; printing temperature=210 °C; nozzle=0.4 mm; layer=0.2 mm | not in the median: sold as toughened, set apart |
| Charpy impact strength XY | 19.4 ± 3.4 kJ/m²p. 1: Charpy impact strength (X-Y) notched (MECHANICAL PROPERTIES - High Speed) | ISO 179, GB/T 1043As the sheet prints it: ISO 179, GB/T 1043; mode=High speed; print speed=300 mm/s; printing temperature=230 °C; nozzle=0.4 mm; layer=0.2 mm | not in the median: another value of this product is in it |
| HDT at 0.45 MPa | 55 °Cp. 1: Heat deflection temp. 0.45MPa | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | in the median |
| HDT at 1.8 MPa | 52 °Cp. 1: Heat deflection temp. 1.8MPa | ISO 75As the sheet prints it: ISO 75; 1.8 MPa | in the median |
| Glass transition temperature | 61 °Cp. 1: Glass transition temp. DSC, 10°C/min | DSC | in the median |
| Vicat softening temperature | 61 °Cp. 1: Vicat softening temp. ISO 306, GB/T 1633 | ISO 306, GB/T 1633As the sheet prints it: 306 ISO 306 GB/T 1633 | |
| Melting temperature | 164 °Cp. 1: Melting temp. | DSCAs the sheet prints it: DSC, 10°C/min; rate=10 °C/min | |
| Crystallization temperature | 96 °Cp. 1: Crystallization temp. | DSCAs the sheet prints it: DSC, 10°C/min; rate=10 °C/min | |
| Decomposition temperature | 370 °Cp. 1: Decomposition temp. | TGAAs the sheet prints it: TGA, 20°C/min; rate=20 °C/min | |
| Density | 1.23 g/cm3p. 1: Density ISO1183, GB/T1033 | ISO 1183, GB/T 1033As the sheet prints it: 1183 ISO1183 GB/T1033 | |
| Water absorption | 0.39%p. 1: Equilibrium water absorption | no standard namedAs the sheet prints it: RH=70%after moisture conditioning70% RH 23°C | |
| Melt mass-flow rate | 15.5 g/10minp. 1: Melt index 210°C, 2.16kg | no standard namedAs the sheet prints it: 210°C 2.16kg | |
Print settings
- Nozzle
- 190–210 °Cown data sheet
- Bed
- 30–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 55 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle Classic: 190-210 °C; Bed 30 - 60 (˚C); Drying 55˚C for 6hPolymaker, PolySonic™ PLA PRO Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time; p. 1: Closure chamber; p. 1: Build surface treatment; p. 1: Based on 0.4mm nozzle
- Nozzle High-speed: 210-230 °C; Bed 30 - 60 (˚C); Drying 55˚C for 6hPolymaker, PolySonic™ PLA PRO Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature, High-speed; p. 1: Build surface treatment; p. 1: Based on 0.4mm nozzle
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Good for
When time is of the essence for functional parts, PLA PRO is the ideal choice for you.
Polymaker, PolySonic™ PLA PRO Technical Data Sheetp. 1 - Benefits
PolySonic™ PLA PRO is a tough PLA that can print at incredible speeds.
Polymaker, PolySonic™ PLA PRO Technical Data Sheetp. 1
Chemicals and environment (2)
- Acid resistance: resistant
Good
Effect of weak acids · weakPolymaker, PolySonic™ PLA PRO Technical Data Sheetp. 1: Effect of weak acids Good - Acid resistance: not resistant
Poor
Effect of strong acids · strongPolymaker, PolySonic™ PLA PRO Technical Data Sheetp. 1: Effect of strong acids Poor
Anycubic PLAStrength XY, MPa51.2Strength Z, MPa24.2Modulus XY, GPa2.83Charpy notched, kJ/m²—HDT 0.45, °C54HDT 1.8, °C53Price, CAD/kg—Nozzle, °C190–230Bed, °C55–65Chamber, °CnoneDrying, °C, h45–506–8 h
Anycubic PLAAnycubic
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Anycubic, ANYCUBIC PLA17 values | |||
| Tensile modulus XY | 2834 ± 79 MPap. 1: Young’s Modulus (X-Y) ISO 527 MPa | ISO 527 | in the median |
| Tensile modulus Z | 2426 ± 156 MPap. 1: Young’s Modulus (Z) ISO 527 MPa | ISO 527 | in the median |
| Tensile strength (yield or break not stated) XY | 51.2 ± 0.6 MPap. 1: Tensile Strength (X-Y) ISO 527 MPa | ISO 527 | in the median |
| Tensile strength (yield or break not stated) Z | 24.2 ± 0.7 MPap. 1: Tensile Strength (Z) ISO 527 MPa | ISO 527 | in the median |
| Elongation at break XY | 4.2 ± 1.1 %p. 1: Elongation at Break (X-Y) ISO 527 % | ISO 527 | in the median |
| Elongation at break Z | 1.1 ± 0.15 %p. 1: Elongation at Break (Z) ISO 527 % | ISO 527 | in the median |
| Flexural modulus XY | 3020±12 MPap. 1: Bending Modulus (X-Y) | ISO 178 | in the median |
| Flexural strength XY | 79.2±1.1 MPap. 1: Bending Strength (X-Y) | ISO 178 | in the median |
| HDT at 0.45 MPa | 55.1 ℃p. 2: Heat Deflection Temperature (HDT) ISO 75-2, 0.45MPa ℃ | ISO 75As the sheet prints it: 0.45MPa ISO 75-2 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| HDT at 1.8 MPa | 52.7 ℃p. 2: Heat Deflection Temperature (HDT) ISO 75-2, 1.8MPa ℃ | ISO 75As the sheet prints it: 1.8MPa ISO 75-2 | in the median |
| Glass transition temperature | 59.2 ℃p. 2: Glass Transition Temperature ISO 11357-1, 10℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-1 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Vicat softening temperature | 62.1 ℃p. 2: Vicat Softening Temperature (VST) ISO 306, 10N ℃ | ISO 306As the sheet prints it: VST 10N ISO 306 | |
| Melting temperature | 169.5 ℃p. 2: Melting Temperature ISO 11357-1, 10℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-1 | |
| Crystallization temperature | 114.3 ℃p. 2: Crystallization Temperature ISO 11357-1, 10℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-1 | |
| Density | 1.241 ± 0.06 g/cm3p. 1: Density ISO 1183,at 23°C g/cm3 | ISO 1183As the sheet prints it: at 23°C ISO 1183 | |
| Moisture content | 0.25 ± 0.03 %p. 1: Moisture Content ISO 787-2 % | ISO 787As the sheet prints it: ISO 787-2 | |
| Melt mass-flow rate | 4.86 ± 0.35 g/10minp. 1: Melt Index ISO 1133 g/10min | ISO 1133 | |
| Anycubic, Anycubic PLA9 valuesUnless a row says otherwise: specimen not stated | |||
| Izod impact strength XY | 22±1 kJ/m²p. 1: Izod Impact Strength (kJ/m²) (X-Y) | printed specimen, ISO 179 | not in the median: notch not stated |
| HDT at 0.45 MPa | 54 ℃p. 2: Heat Deflection Temperature (HDT) ISO 75-2, 0.45MPa ℃ | printed specimen (implied by the document), ISO 75As the sheet prints it: 0.45MPa ISO 75-2 | in the median |
| Glass transition temperature | 61.2 ℃p. 2: Glass Transition Temperature ISO 11357-1, 10℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-1 | in the median |
| Vicat softening temperature | 55 ℃p. 2: Vicat Softening Temperature (VST) ISO 306, 10N ℃ | ISO 306As the sheet prints it: VST 10N ISO 306 | |
| Melting temperature | 166 ℃p. 2: Melting Temperature ISO 11357-1, 10℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-1 | |
| Crystallization temperature | 114 ℃p. 2: Crystallization Temperature ISO 11357-1, 10℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-1 | |
| Density | 1.24 g/cm3p. 1: Density/(g/cm³) ISO 1183,at 23°C g/cm3 | ISO 1183As the sheet prints it: at 23°C ISO 1183 | |
| Moisture content | 0.26 %p. 1: Moisture Content ISO 787-2 % | ISO 787As the sheet prints it: ISO 787-2 | |
| Melt mass-flow rate | 5.7 ± 0.67 g/10minp. 1: Melt Index/ ( g/10min) ISO 1133 g/10min | ISO 1133As the sheet prints it: g/10min ISO 1133 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 55–65 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 45–50 °C for 6–8 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 190-230; Bed 55-65; Drying 45-50℃,6-8hAnycubic, Anycubic PLAp. 2: Recommended printing settings; p. 2: Dry Environment
- Nozzle 190~230℃; Bed 55~65℃; Drying 50~60℃, 6~8hAnycubic, ANYCUBIC PLAp. 2: Recommended printing settings; p. 2: Dry Environment
Price
Not in the price sample.
Its 3 documents
What the maker says (1)
- Surface finish
It provides prints with smooth surfaces and high success rates.
Anycubic, Anycubic PLAp. 1
Polymaker PolyLite PLA PRO Army BeigeStrength XY, MPa35.6Strength Z, MPa39.7Modulus XY, GPa2.68Charpy notched, kJ/m²—HDT 0.45, °C59HDT 1.8, °C58Price, CAD/kg—Nozzle, °C190–220Bed, °C30–60Chamber, °C0–40Drying, °C, h508 h
Polymaker PolyLite PLA PRO Army BeigePolymaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Polymaker, Techanical Data Sheet Polylite™ PLA Pro17 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 2681 ± 215 MPap. 5: Young’s modulus (X-Y) | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100 %; Environmental temperature 25 ˚C; Cooling fan ON | in the median |
| Tensile modulus Z | 2551 ± 335 MPap. 5: Young’s modulus (Z) | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100 %; Environmental temperature 25 ˚C; Cooling fan ON | in the median |
| Tensile strength (yield or break not stated) XY | 35.65 ± 0.93 MPap. 5: Tensile strength (X-Y) | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100 %; Environmental temperature 25 ˚C; Cooling fan ON | in the median |
| Tensile strength (yield or break not stated) Z | 39.66 ± 0.60 MPap. 5: Tensile strength (Z) | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100 %; Environmental temperature 25 ˚C; Cooling fan ON | in the median |
| Elongation at break XY | 2.45 ± 0.61 %p. 5: Elongation at break (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 6.02 ± 2.43 %p. 5: Elongation at break (Z) | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100 %; Environmental temperature 25 ˚C; Cooling fan ON | in the median |
| Flexural modulus XY | 2700 ± 154 MPap. 5: Bending modulus (X-Y) | ISO 178, GB/T 9341moistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100 %; Environmental temperature 25 ˚C; Cooling fan ON | in the median |
| Flexural strength XY | 68.08 ± 2.21 MPap. 5: Bending strength (X-Y) | ISO 178, GB/T 9341moistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100 %; Environmental temperature 25 ˚C; Cooling fan ON | in the median |
| Charpy impact strength XY | 13.44 ± 1.17 kJ/m2p. 5: Charpy impact strength (X-Y) | ISO 179, GB/T 1043moistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100 %; Environmental temperature 25 ˚C; Cooling fan ON | not in the median: notch not stated |
| HDT at 0.45 MPa | 59.3 °Cp. 4: Heat deflection temperature ISO 75 0.45MPa | ISO 75As the sheet prints it: 0.45MPa 75 ISO 75 | in the median |
| HDT at 1.8 MPa | 57.6 °Cp. 4: Heat deflection temperature ISO 75 1.8MPa | ISO 75As the sheet prints it: 1.8MPa 75 ISO 75 | in the median |
| Glass transition temperature | 62 °Cp. 4: Glass transition temperature DSC, 10°C/min | specimen not stated, DSC | in the median |
| Vicat softening temperature | 62.7 °Cp. 4: Vicat softening temperature ISO 306, GB/T 1633 | ISO 306, GB/T 1633As the sheet prints it: 306 ISO 306 GB/T 1633 | |
| Melting temperature | 150 °Cp. 4: Melting temperature DSC, 10°C/min | specimen not stated, DSC | |
| Density | 1.22 g/cm3p. 2: Density ISO1183, GB/T1033 | specimen not stated, ISO 1183, GB/T 1033As the sheet prints it: 1183 ISO1183 GB/T1033 | |
| Water absorption | 0.291 %p. 3: Equilibrium water absorption (%) | specimen not stated, no standard statedafter moisture conditioning70% RH - 23 ℃ | |
| Melt mass-flow rate | 6 g/10minp. 2: Melt index 210°C, 2.16 kg | specimen not stated, no standard namedAs the sheet prints it: 210°C 2.16 kg | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 30–60 °Cown data sheet
- Heated chamber
- 0–40 °Cown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190 – 220 (℃); Bed 30 - 60 (˚C); Chamber 0 - 40 (˚C)Polymaker, Techanical Data Sheet Polylite™ PLA Prop. 5: Recommended printing settings: Nozzle temperature; p. 5: Environmental temperature; p. 5: Based on 0.4 mm nozzle; p. 5: Build surface material
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
Polylite™ PLA Pro is a first of its kind combining high toughness and high rigidity, this professional PLA offers engineering properties with the ease of print of regular PLA.
Polymaker, Techanical Data Sheet Polylite™ PLA Prop. 2 - Supports and removal
Recommended support material PolySupport™ and PolyDissolve™ S1
Polymaker, Techanical Data Sheet Polylite™ PLA Prop. 5
Chemicals and environment (2)
- Acid resistance: not resistant
Not resistant
Effect of weak acids · weakPolymaker, Techanical Data Sheet Polylite™ PLA Prop. 2: Effect of weak acids Not resistant - Acid resistance: not resistant
Not resistant
Effect of strong acids · strongPolymaker, Techanical Data Sheet Polylite™ PLA Prop. 2: Effect of strong acids Not resistant
Polymaker PolyWoodStrength XY, MPa23.2Strength Z, MPa14.5Modulus XY, GPa2.64Charpy notched, kJ/m²2.06HDT 0.45, °C56HDT 1.8, °C54Price, CAD/kg65Nozzle, °C190–210Bed, °C25–60Chamber, °C25–45Drying, °C, h708 h
Polymaker PolyWoodPolymaker
Modified: lightweight additive. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Polymaker, PolyWood16 valuesThe same values also in Polymaker, PolyWood™. | |||
| Tensile modulus XY | 2636 ± 330 MPap. 4: Young’s modulus (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 195 °C; Bed temperature 60 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) XY | 23.2 ± 0.4 MPap. 4: Tensile strength (X-Y)also in Polymaker, PolyWood™ | ISO 527, GB/T 1040print settingsPrinting temperature 195 °C; Bed temperature 60 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) Z | 14.5 ± 0.4 MPap. 4: Tensile strength (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 195 °C; Bed temperature 60 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: added filler or additive |
| Elongation at break XY | 8.21 ± 0.87 %p. 4: Elongation at break (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 195 °C; Bed temperature 60 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: added filler or additive |
| Elongation at break Z | 7.91 ± 1.3 %p. 4: Elongation at break (Z) | ISO 527, GB/T 1040print settingsPrinting temperature 195 °C; Bed temperature 60 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: added filler or additive |
| Flexural modulus XY | 2607 ± 50 MPap. 4: Bending modulus (X-Y) | ISO 178, GB/T 9341print settingsPrinting temperature 195 °C; Bed temperature 60 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: added filler or additive |
| Flexural strength XY | 52.9 ± 0.3 MPap. 4: Bending strength (X-Y) | ISO 178, GB/T 9341print settingsPrinting temperature 195 °C; Bed temperature 60 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: added filler or additive |
| Charpy impact strength XY | 2.06 ± 0.19 kJ/m2p. 4: Charpy impact strength (X-Y) | ISO 179, GB/T 1043notchedprint settingsPrinting temperature 195 °C; Bed temperature 60 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: added filler or additive |
| HDT at 0.45 MPa | 56.2 °Cp. 3: Heat deflection temperature ISO 75 0.45MPa | ISO 75As the sheet prints it: 0.45MPa ISO 75 | not in the median: added filler or additive |
| HDT at 1.8 MPa | 54.1 °Cp. 3: Heat deflection temperature ISO 75 1.8MPa | ISO 75As the sheet prints it: 1.8MPa ISO 75 | not in the median: added filler or additive |
| Glass transition temperature | 62.4 °Cp. 3: Glass transition temperature DSC, 10°C/min | DSC | not in the median: added filler or additive |
| Vicat softening temperature | 60.3 °Cp. 3: Vicat softening temperature ISO 306, GB/T 1633 | ISO 306, GB/T 1633 | |
| Melting temperature | 150.8 °Cp. 3: Melting temperature DSC, 10°C/min | DSC | |
| Crystallization temperature | 115.5 °Cp. 3: Crystallization temperature DSC, 10°C/min | DSC | |
| Density | 0.8 g/cm3p. 2: Density ISO1183, GB/T1033also in Polymaker, PolyWood™ | ISO 1183, GB/T 1033 | |
| Water absorption | 0.4 %p. 2: Equilibrium water absorption (%)= | no standard stated | |
| Polymaker, PolyWood™8 values | |||
| Elongation at break XY | 8.2 ± 0.9 %p. 6: Elongation at break (X-Y) ASTM D638 (ISO 527, GB/T 1040) | ASTM D638, ISO 527, GB/T 1040 | not in the median: another value of this product is in it |
| Flexural modulus orientation not stated | 2607 ± 50 MPap. 6: Bending modulus ASTM D790 (ISO 178, GB/T 9341) | ASTM D790, ISO 178, GB/T 9341 | not in the median: another value of this product is in it |
| Flexural strength orientation not stated | 52.9 ± 0.3 MPap. 6: Bending strength ASTM D790 (ISO 178, GB/T 9341) | ASTM D790, ISO 178, GB/T 9341 | not in the median: another value of this product is in it |
| Impact strength, test unclear | 2.1 ± 0.2 kJ/m2p. 6: Charpy impact strength ASTM D256 (ISO 179, GB/T 1043) | ASTM D256, ISO 179, GB/T 1043notchedWhich test: probably Charpy | listed under other properties |
| Glass transition temperature | 62 °Cp. 6: Glass transition temperature DSC, 10 °C/min | DSC | not in the median: another value of this product is in it |
| Vicat softening temperature | 60 °Cp. 6: Vicat softening temperature ASTM D1525 (ISO 306, GB/T 1633) | ASTM D1525, ISO 306, GB/T 1633 | |
| Melting temperature | 151 °Cp. 6: Melting temperature DSC, 10 °C/min | DSC | |
| Crystallization temperature | 116 °Cp. 6: Crystallization temperature DSC, 10 °C/min | DSC | |
Print settings
- Nozzle
- 190–210 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 70 °C for 8 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 190 – 210 (℃); Bed 25 - 60 (°C); Chamber Room temperature - 45 (˚C)Polymaker, PolyWoodp. 4: Recommended printing settings: Nozzle temperature; p. 4: Environmental temperature
- Nozzle 190°C - 210°C; Bed 25°C - 60°C; Drying 70˚C for 8hPolymaker, PolyWood™p. 4: Recommended printing settings; p. 6: Drying settings
Price
65 CAD/kgits one regular price in the sample
1 listing
- Voxel Factory: 65 CAD/kgPolymaker PolyWood 1.75mm 0.6kg (SKU PMK-PWD-WUD-175-600)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (6)
- Printing advice
PolyWood™ can tend to have more stringing than regular PLA, we recommend to adjust the retraction settings and increase the print head travel speed.
Polymaker, PolyWood™p. 4 - Surface finish
PolyWood™ can be wet sanded to obtain a smoother surface.
Polymaker, PolyWood™p. 5 - Moisture sensitivity
It is recommended to store PolyWood™ in the PolyBox™ to prevent moisture absorption which will lower the quality and the mechanical properties of the print.
Polymaker, PolyWood™p. 5 - Printing advice
PolyWood™ can be dipped in hot water (above 70˚C) and be reshaped.
Polymaker, PolyWood™p. 5 - Benefits
PolyWood™ is a wood mimic filament without actual wood powder, which removes all risks of nozzle clogs.
Polymaker, PolyWood™p. 6 - Supports and removal
Recommended support material PolySupport™ and PolyDissolve™ S1
Polymaker, PolyWoodp. 4
Chemicals and environment (2)
- Acid resistance: not resistant
Not resistant
Effect of weak acids · weakPolymaker, PolyWoodp. 2: Effect of weak acids Not resistant - Acid resistance: not resistant
Not resistant
Effect of strong acids · strongPolymaker, PolyWoodp. 2: Effect of strong acids Not resistant
Raise3D Hyper Speed PLAStrength XY, MPa48Strength Z, MPa39Modulus XY, GPa2.6Charpy notched, kJ/m²—HDT 0.45, °C58HDT 1.8, °C55Price, CAD/kg52Nozzle, °C190–230Bed, °C30–65Chamber, °CnoneDrying, °C, h508 h
Raise3D Hyper Speed PLARaise3D
Sold as toughened or impact-modified: "The mechanical properties of Hyper Speed PLA outperform regular PLA under high-speed printing, significantly improving the interlayer bonding quality and impact resistance." (Raise3D, Raise3D Hyper Speed PLA Technical Data Sheet, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Raise3D, Raise3D Hyper Speed PLA Technical Data Sheet16 valuesUnless a row says otherwise: printed specimenmoistureconditioned at room temperature for 24 h | |||
| Tensile modulus XY | 2600 ±215 MPap. 1: Young’s modulus (MPa) (XY) | ISO 527, GB/T 1040print settingsNozzle diameter = 0.4 mm; nozzle temperature = 220 °C; printing speed = 200 mm/s; build plate temperature = 60 °C; infill = 100% | in the median |
| Tensile modulus Z (ZX) | 2475 ±234 MPap. 1: Young’s modulus (MPa) (ZX) | ISO 527, GB/T 1040print settingsNozzle diameter = 0.4 mm; nozzle temperature = 220 °C; printing speed = 200 mm/s; build plate temperature = 60 °C; infill = 100% | in the median |
| Tensile strength (yield or break not stated) XY | 48 ± 7 MPap. 1: Tensile strength (MPa) (XY) | ISO 527, GB/T 1040print settingsNozzle diameter = 0.4 mm; nozzle temperature = 220 °C; printing speed = 200 mm/s; build plate temperature = 60 °C; infill = 100% | in the median |
| Tensile strength (yield or break not stated) Z (ZX) | 39 ± 4 MPap. 1: Tensile strength (MPa) (ZX) | ISO 527, GB/T 1040print settingsNozzle diameter = 0.4 mm; nozzle temperature = 220 °C; printing speed = 200 mm/s; build plate temperature = 60 °C; infill = 100% | in the median |
| Elongation at break XY | 9.6 ± 0.8 %p. 1: Elongation at break (%) (XY) | ISO 527, GB/T 1040print settingsNozzle diameter = 0.4 mm; nozzle temperature = 220 °C; printing speed = 200 mm/s; build plate temperature = 60 °C; infill = 100% | in the median |
| Elongation at break Z (ZX) | 3.8 ± 1.4 %p. 1: Elongation at break (%) (ZX) | ISO 527, GB/T 1040print settingsNozzle diameter = 0.4 mm; nozzle temperature = 220 °C; printing speed = 200 mm/s; build plate temperature = 60 °C; infill = 100% | in the median |
| Flexural modulus XY | 2700 ±154 MPap. 1: Bending modulus (MPa) | ISO 178, GB/T 9341print settingsNozzle diameter = 0.4 mm; nozzle temperature = 220 °C; printing speed = 200 mm/s; build plate temperature = 60 °C; infill = 100% | in the median |
| Flexural strength XY | 81 ± 2 MPap. 1: Bending strength (MPa) | ISO 178, GB/T 9341print settingsNozzle diameter = 0.4 mm; nozzle temperature = 220 °C; printing speed = 200 mm/s; build plate temperature = 60 °C; infill = 100% | in the median |
| Izod impact strength XY | 4.3 ± 1.3 kJ/m²p. 1: Izod impact strength (kJ/m²) | ISO 180, GB/T 1843print settingsNozzle diameter = 0.4 mm; nozzle temperature = 220 °C; printing speed = 200 mm/s; build plate temperature = 60 °C; infill = 100% | not in the median: notch not stated |
| Hardness XY | 81 Shore Dp. 1: Hardness Shore D (XY) | ISO 7619, GB/T 531 | in the median |
| Hardness ZX | 80 Shore Dp. 1: Hardness Shore D (ZX) | ISO 7619, GB/T 531 | not in the median: measured on a bar in another orientation |
| HDT at 0.45 MPa | 58 °Cp. 2: Heat distortion temperature (°C) (58) | printed specimen (implied by the document), ISO 75As the sheet prints it: ISO 75; 0.45 MPa | in the median |
| HDT at 1.8 MPa | 55 °Cp. 2: Heat distortion temperature (°C) (55) | printed specimen (implied by the document), ISO 75As the sheet prints it: ISO 75; 1.8 MPa | in the median |
| Density | 1.21 g/cm³p. 1: Density | specimen not stated, ISO 1183, GB/T 1033moisture state not stated | |
| Water absorption | 0.4 %p. 1: Water absorption (%) | specimen not stated, ISO 62As the sheet prints it: ISO 62: Method 1 | |
| Melt mass-flow rate | 4.5 g/10 minp. 2: Melt flow index (g/10 min) | specimen not stated, no standard namedAs the sheet prints it: 2.16 kg | |
Print settings
- Nozzle
- 190–230 °CBambu Lab Filament Guide
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- No temperature statedRaise3D, Raise3D Hyper Speed PLA Technical Data Sheetp. 1: Recommended printing settings. Its nozzle and bed temperatures are the specimens' print conditions, which are not printing guidance.
Price
52 CAD/kgits one regular price in the sample
1 listing
- Shop3D.ca: 52 CAD/kgRaise3D Hyper Speed PLA Filament - 1.75mm (1kg) / White (SKU [S]5.11.19130A01)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (6)
- Good for
Therefore, Hyper speed PLA meets the general performance needs of various applications for Hyper FFF™ solution, including prototyping, models, props, jigs and fixtures combining.
Raise3D, Raise3D Hyper Speed PLA Technical Data Sheetp. 1 - Benefits
Hyper Speed PLA is made from renewable resources and comes in different colors.
Raise3D, Raise3D Hyper Speed PLA Technical Data Sheetp. 1 - Precision and tolerance
Its outstanding printability allows easy printing of large-sized models with high dimensional accuracy at high speeds.
Raise3D, Raise3D Hyper Speed PLA Technical Data Sheetp. 1 - Surface finish
As a result, it delivers excellent surface quality and detailed model structures.
Raise3D, Raise3D Hyper Speed PLA Technical Data Sheetp. 1 - Adhesion between layers
The mechanical properties of Hyper Speed PLA outperform regular PLA under high-speed printing, significantly improving the interlayer bonding quality and impact resistance.
Raise3D, Raise3D Hyper Speed PLA Technical Data Sheetp. 1 - Odour and emissions
Odor / Almost odorless
Raise3D, Raise3D Hyper Speed PLA Technical Data Sheetp. 1
Polymaker PolyTerra PLAStrength XY, MPa23.2Strength Z, MPa12.2Modulus XY, GPa2Charpy notched, kJ/m²—HDT 0.45, °C58HDT 1.8, °C—Price, CAD/kg29Nozzle, °C190–230Bed, °C25–60Chamber, °C25–60Drying, °C, h556 h
Polymaker PolyTerra PLAPolymaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Polymaker, PolyTerra™ PLA Technical Data Sheet11 valuesThe same values also in Polymaker, PolyTerra PLA.Unless a row says otherwise: printed specimenprint settingsPrinting temperature 230 °C; Infill 100%; Bed temperature 50 °C; Shell 2; Top & bottom layer 3; Cooling fan ON; Environmental temperature Ambient | |||
| Tensile modulus XY | 1997 ± 64 MPap. 1: Young’s modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile modulus Z | 1615 ± 54 MPap. 1: Young’s modulus (Z) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 23.2 ± 0.5 MPap. 1: Tensile strength (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 12.2 ± 0.7 MPap. 1: Tensile strength (Z) | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 27.8 ± 2.4 %p. 1: Elongation at break (X-Y) | ISO 527, GB/T 1040 | in the median |
| Elongation at break Z | 0.9 ± 0.1 %p. 1: Elongation at break (Z) | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 2209 ± 75 MPap. 1: Bending modulus (X-Y) | ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 40.4 ± 1.1 MPap. 1: Bending strength (X-Y) | ISO 178, GB/T 9341 | in the median |
| HDT at 0.45 MPa | 58 °Ctranscription correctedp. 1: Heat deflection temp. ISO 75 0.45MPa | printed specimen (implied by the document), ISO 75As the sheet prints it: 0.45MPa ISO 75 | in the median |
| Glass transition temperature | 61 °Cp. 1: Glass transition temp. DSC, 10°C/min | specimen not stated, DSCprint settings not stated | in the median |
| Melt mass-flow rate | 14-20 g/10minp. 1: Melt index N/Aalso in Polymaker, PolyTerra PLA | specimen not stated, no standard statedprint settings not stated | |
| Polymaker, PolyTerra PLA8 valuesUnless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile modulus XY | 1882 ± 141 MPap. 4: Young’s modulus (X-Y) | ISO 527, GB/T 1040 | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) XY | 20.9 ± 2.0 MPap. 4: Tensile strength (X-Y) | ISO 527, GB/T 1040 | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) Z | 18.0 ± 0.3 MPap. 4: Tensile strength (Z) | ISO 527, GB/T 1040 | not in the median: another value of this product is in it |
| Elongation at break XY | 34.5 ± 8.1 %p. 4: Elongation at break (X-Y) | ISO 527, GB/T 1040 | not in the median: another value of this product is in it |
| Flexural modulus XY | 2695 ± 541 MPap. 4: Bending modulus (X-Y) | ISO 178, GB/T 9341 | not in the median: another value of this product is in it |
| Flexural strength XY | 39.6 ± 1.1 MPap. 4: Bending strength (X-Y) | ISO 178, GB/T 9341 | not in the median: another value of this product is in it |
| Charpy impact strength XY | 5.7 ± 0.4 kj/m²p. 4: Charpy impact strength (X-Y) | ISO 179, GB/T 9343 | not in the median: notch not stated |
| Density | 1.31 ± 0.02 g/cm3p. 2: Density ISO1183, GB/T1033 | specimen not stated, ISO 1183, GB/T 1033As the sheet prints it: 1183 ISO1183 GB/T1033 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- 25–60 °Cown data sheet
- Drying
- 55 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 190 – 230 (℃); Bed 25 - 60 (˚C); Chamber Room temperature - 60 (˚C)Polymaker, PolyTerra PLAp. 4: Recommended printing settings; p. 4: Environmental temperature
- Nozzle 190 – 230 (°C); Bed 25 - 50 (˚C); Drying 55˚C for 6hPolymaker, PolyTerra™ PLA Technical Data Sheetp. 1: Recommended printing settings: Nozzle temperature; p. 1: Drying temp. and time; p. 1: Closure chamber
Price
29 CAD/kgthe median of its 3 regular prices in the sample
3 listings
- DigitMakers: 29 CAD/kgPolyTerra™ PLA - Various Colors (1.75mm 1000g) / Charcoal Black (SKU PLMK-FL-TERRA-PLA-1.75-1000G-BLK)in its price; seen 30 Sep 2026
- MakerWiz: 36 CAD/kgPolymaker PolyTerra™ PLA Filament - 1.75 mm, 1 kg (20 Colours) / Charcoal Black / 1.75 mm (SKU 61000306)in its price; seen 30 Sep 2026
- Voxel Factory: 26 CAD/kgPolymaker Polyterra PLA 1.75mm 1kg / Cotton white (SKU PMK-ECO-CWH-175-1KG)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (1)
- Supports and removal
Recommended support material PolySupport™ and PolyDissolve™ S1
Polymaker, PolyTerra PLAp. 4
Chemicals and environment (2)
- Acid resistance: not resistant
Not Resistant
Effect of weak acids · weakPolymaker, PolyTerra PLAp. 2: Effect of weak acids Not Resistant - Acid resistance: not resistant
Not Resistant
Effect of strong acids · strongPolymaker, PolyTerra PLAp. 2: Effect of strong acids Not Resistant
Raise3D Premium PLAStrength XY, MPa40Strength Z, MPa36Modulus XY, GPa2.68Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg43Nozzle, °C190–220Bed, °C30–60Chamber, °C25–45Drying, °C, h508 h
Raise3D Premium PLARaise3D
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Raise3D, Raise3D Premium PLA Technical Data Sheet15 valuesUnless a row says otherwise: printed specimenprint settingsnozzle temperature = 210 °C; printing speed = 45 mm/s; build plate temperature = 25 °C; infill = 100% | |||
| Tensile modulus XY | 2681 ± 215 MPap. 1: Young’s modulus (MPa, X - Y) | ASTM D638, ISO 527, GB/T 1040As the sheet prints it: ASTM D638 (ISO 527, GB/T 1040)moistureconditioned at room temperature for 24h prior to testing | in the median |
| Tensile modulus Z | 2551 ± 335 MPap. 1: Young’s modulus (MPa, Z) | ASTM D638, ISO 527, GB/T 1040As the sheet prints it: ASTM D638 (ISO527, GB/T 1040)moistureconditioned at room temperature for 24h prior to testing | in the median |
| Tensile strength (yield or break not stated) XY | 40 ± 1 MPap. 1: Tensile strength (MPa, X - Y) | ASTM D638, ISO 527, GB/T 1040As the sheet prints it: ASTM D638 (ISO 527, GB/T 1040)moistureconditioned at room temperature for 24h prior to testing | in the median |
| Tensile strength (yield or break not stated) Z | 36 ± 5 MPap. 1: Tensile strength (MPa, Z) | ASTM D638, ISO 527, GB/T 1040As the sheet prints it: ASTM D638 (ISO527, GB/T 1040)moistureconditioned at room temperature for 24h prior to testing | in the median |
| Elongation at break XY | 2.5 ± 0.6 %p. 1: Elongation at break (%, X - Y) | ASTM D638, ISO 527, GB/T 1040As the sheet prints it: ASTM D638 (ISO 527, GB/T 1040)moistureconditioned at room temperature for 24h prior to testing | in the median |
| Elongation at break Z | 6.0 ± 2.4 %p. 1: Elongation at break (%, Z) | ASTM D638, ISO 527, GB/T 1040As the sheet prints it: ASTM D638 (ISO527, GB/T 1040)moistureconditioned at room temperature for 24h prior to testing | in the median |
| Flexural modulus XY | 2700 ± 154 MPap. 1: Bending modulus (MPa, X - Y) | ASTM D790, ISO 178, GB/T 9341As the sheet prints it: ASTM D790 (ISO 178, GB/T 9341)moistureconditioned at room temperature for 24h prior to testing | in the median |
| Flexural strength XY | 68 ± 2 MPap. 1: Bending strength (MPa, X - Y) | ASTM D790, ISO 178, GB/T 9341As the sheet prints it: ASTM D790 (ISO 178, GB/T 9341)moistureconditioned at room temperature for 24h prior to testing | in the median |
| Impact strength, test unclear XY | 13.4 ±1.2 KJ/m²p. 1: Impact strength (KJ/m², X - Y) | ASTM D256, ISO 179, GB/T 1043As the sheet prints it: ASTM D256 (ISO 179, GB/T 1043)moistureconditioned at room temperature for 24h prior to testing | listed under other properties |
| Hardness | 84 Shore Dp. 1: Hardness Shore D ASTM D2240 (ISO 7619, GB/T 531) | ASTM D2240, ISO 7619, GB/T 531print settings not stated | in the median |
| Glass transition temperature | 62.3 °Cp. 1: Glass transition temperature (°C) | DSCAs the sheet prints it: DSC, 10 °C /min | in the median |
| Vicat softening temperature | 62.7 °Cp. 1: Vicat Softening temperature (°C) | ASTM D1525, ISO 306, GB/T 1633As the sheet prints it: ASTM D1525 (ISO 306 GB/T 1633) | |
| Melting temperature | 150.9 °Cp. 1: Melting temperature (°C) | DSCAs the sheet prints it: DSC, 10 °C/min | |
| Density | 1.2 g/cm³p. 1: Density (g/cm³ at 21.5 °C) | ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: ASTM D792 (ISO 1183, GB/T 1033) | |
| Melt mass-flow rate | 6.0 g/10 minp. 1: Melt index (g/10 min) | no standard namedAs the sheet prints it: 210 °C, 2.16 kg | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 30–60 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle (°C) 190 - 220; Bed (°C) 30-60; Chamber Room temperature - 45Raise3D, Raise3D Premium PLA Technical Data Sheetp. 2: Recommended printing settings: Nozzle temperature; p. 2: Recommended environmental temperature (°C); p. 2: Recommended build surface; p. 2: Note
Price
43 CAD/kgthe median of its 2 regular prices in the sample
2 listings
- DigitMakers: 43 CAD/kgRaise3D Premium PLA Filament 1.75mm 1kg Spool / Black / 1.75mm (SKU RAISE3D-FL-PLA-1.75-1KG-BLK)in its price; seen 30 Sep 2026
- Shop3D.ca: 43 CAD/kgRaise3D Premium PLA Filament - 1.75mm (1kg) / Black (SKU [S]5.11.19151A01)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (4)
- Benefits
Raise3D Premium PLA is a premium PLA designed for all desktop FDM/FFF printers.
Raise3D, Raise3D Premium PLA Technical Data Sheetp. 1 - Benefits
It ensures consistent extrusion and prevents nozzle jams.
Raise3D, Raise3D Premium PLA Technical Data Sheetp. 1 - Supports and removal
Recommended support materials Raise3D Premium PVA
Raise3D, Raise3D Premium PLA Technical Data Sheetp. 2 - Printing advice
Premium PLA can be printed under conditions similar to most other PLA filaments
Raise3D, Raise3D Premium PLA Technical Data Sheetp. 2
Eryone Burnt Titanium PLAStrength XY, MPa34Strength Z, MPa34.2Modulus XY, GPa1.74Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C55–70Chamber, °CnoneDrying, °C, h55–606 h
Eryone Burnt Titanium PLAEryone
Data sheet shared with Eryone Dual Color Burnt Titanium PLA: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 55–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 55–60 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-220 ℃; Bed 55-70℃; Drying 55-60℃, 6hEryone, Technical Data Sheet (TDS) Burnt Titanium PLAp. 1: Nozzle temperature, Bed temperature, Sealed printing
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
This material has excellent toughness, producing no bubbles or odors during the printing process, and is resistant to clogging or warping, ensuring outstanding shaping results and a smoother printing experience.
Eryone, Technical Data Sheet (TDS) Burnt Titanium PLAp. 1 - Adhesion between layers
Additionally, its Z-axis tensile strength reaches 34 MPa, with excellent interlayer adhesion.
Eryone, Technical Data Sheet (TDS) Burnt Titanium PLAp. 1 - Printing advice
Sealed printing Supports open printing; better results with enclosure.
Eryone, Technical Data Sheet (TDS) Burnt Titanium PLAp. 1
Eryone Dual Color Burnt Titanium PLAStrength XY, MPa34Strength Z, MPa34.2Modulus XY, GPa1.74Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C55–70Chamber, °CnoneDrying, °C, h55–606 h
Eryone Dual Color Burnt Titanium PLAEryone
Data sheet shared with Eryone Burnt Titanium PLA: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Eryone, Technical Data Sheet (TDS) Dual Color Burnt Titanium PLA15 valuesThe same values also in Eryone, Technical Data Sheet (TDS) Burnt Titanium PLA.Unless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 1737.5 MPap. 2: Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile modulus Z (X-Z) | 1623.7 MPap. 2: Elastic modulus X-Z 50mm/min GB/T 1040.1-2006 MPaalso in Eryone, Technical Data Sheet (TDS) Burnt Titanium PLA | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) XY | 52.2 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60° C, filling=100%, nozzle diameter=0.4mm | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) Z (X-Z) | 34.2 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPaalso in Eryone, Technical Data Sheet (TDS) Burnt Titanium PLA | GB/T 1843As the sheet prints it: 50mm/min GB/T 1843print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) orientation not stated | 34 MPap. 1: tensile strength reaches | no standard stated | in the median |
| Elongation at break XY | 2.1 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Elongation at break Z (X-Z) | 1.9 %p. 2: Elongation at break X-Z 50mm/min GB/T 1040.4 %also in Eryone, Technical Data Sheet (TDS) Burnt Titanium PLA | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural modulus orientation not stated | 2861.7 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural strength orientation not stated | 82.4 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Impact strength, test unclear | 3.7 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1843 kJ/m2 | GB/T 1843As the sheet prints it: 2.75J GB/T 1843print settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60° C, filling=100%, nozzle diameter=0.4mm | listed under other properties |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃ | specimen not stated, ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 62 ℃p. 1: Glass transition temperature (° C) DSC, 10 ° C/min ℃ | specimen not stated, DSCAs the sheet prints it: ° C DSC | in the median |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temperature(° C) ASTM D1525 (ISO 306 GB/T 1633) ℃ | specimen not stated, ASTM D1525, ISO 306, GB/T 1633 | |
| Density | 1.23 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ | specimen not stated, ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 | |
| Melt mass-flow rate | 6 g/10minp. 1: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min | specimen not stated, no standard namedAs the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg | |
| Eryone, Technical Data Sheet (TDS) Burnt Titanium PLA1 value | |||
| Charpy impact strength orientation not stated | 3.7 kJ/m2p. 2: Charpy Impact strenght | GB/T 1843As the sheet prints it: GB/T 1843; pendulum energy=2.75 J | not in the median: notch not stated |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 55–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 55–60 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-220 ℃; Bed 55-70℃; Drying 55-60℃, 6hEryone, Technical Data Sheet (TDS) Dual Color Burnt Titanium PLAp. 1: Recommended printing settings; p. 1: Sealed printing
Price
Not in the price sample.
Its 3 documents
What the maker says (3)
- Benefits
This material exhibits excellent toughness, preventing bubbles or odors during printing and resisting clogging or warping, ensuring superior molding results and a smoother printing process.
Eryone, Technical Data Sheet (TDS) Dual Color Burnt Titanium PLAp. 1 - Adhesion between layers
Furthermore, its Z-axis tensile strength reaches 34 MPa, ensuring excellent interlayer adhesion.
Eryone, Technical Data Sheet (TDS) Dual Color Burnt Titanium PLAp. 1 - Printing advice
Sealed printing Supports open printing; better results with enclosure.
Eryone, Technical Data Sheet (TDS) Dual Color Burnt Titanium PLAp. 1
Eryone PLA-LiteStrength XY, MPa32.4Strength Z, MPa18Modulus XY, GPa0.715Charpy notched, kJ/m²—HDT 0.45, °C60HDT 1.8, °C—Price, CAD/kg23Nozzle, °C190–220Bed, °C55–70Chamber, °CnoneDrying, °C, h50–606 h
Eryone PLA-LiteEryone
Modified: cosmetic dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Eryone, Technical Data Sheet (TDS) PLA-Lite13 valuesUnless a row says otherwise: printed specimenprint settingsprinting temperature=220 ° C, printing speed=100mm/s, base plate 55° C, filling=100%, nozzle diameter=0.4mm | |||
| Tensile modulus XY | 715.3 MPap. 2: Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006 | not in the median: added filler or additive |
| Tensile modulus Z (X-Z) | 603.4 MPap. 2: Elastic modulus X-Z 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006 | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) XY | 32.4 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) Z (X-Z) | 18 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPa | GB/T 1843As the sheet prints it: 50mm/min GB/T 1843 | not in the median: added filler or additive |
| Elongation at break XY | 7.0 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | not in the median: added filler or additive |
| Elongation at break Z (X-Z) | 1.8 %p. 2: Elongation at break X-Z 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | not in the median: added filler or additive |
| Flexural modulus orientation not stated | 2039.5 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341 | not in the median: added filler or additive |
| Flexural strength orientation not stated | 50.9 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341 | not in the median: added filler or additive |
| Impact strength, test unclear | 3.7 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1843 kJ/m2 | GB/T 1843As the sheet prints it: 2.75J GB/T 1843 | listed under other properties |
| HDT at 0.45 MPa | 60 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃ | specimen not stated; its document points to a moulded or resin bar, ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: added filler or additive |
| Glass transition temperature | 62 ℃p. 1: Glass transition temperature (° C) DSC, 10 ° C/min ℃ | specimen not stated, DSCAs the sheet prints it: ° C DSC | not in the median: added filler or additive |
| Density | 1.4 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ | specimen not stated, ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 | |
| Melt mass-flow rate | 13.7 g/10minp. 1: Melt Index(g/10 min) 210 ° C, 2.16 kg g/10min | specimen not stated, no standard namedAs the sheet prints it: g/10 min 210 ° C 2.16 kg | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 55–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-220 ℃; Bed 55-70℃; Drying 50-60℃, 6hEryone, Technical Data Sheet (TDS) PLA-Litep. 1: Recommended printing settings; p. 1: Sealed printing
Price
23 CAD/kgits one regular price in the sample
1 listing
- ERYONE Canada: 23 CAD/kgPLA Lite Filament - 1.75mm±0.03mm (1kg) / skin (SKU B0371017)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (2)
- Benefits
It can achieve perfect printing results without complex parameter adjustments.
Eryone, Technical Data Sheet (TDS) PLA-Litep. 1 - Surface finish
It is a filament with a matte effect, high-quality temperament, no layer lines, and excellent mechanical properties, which can meet the needs of most appearance models.
Eryone, Technical Data Sheet (TDS) PLA-Litep. 1
Eryone Standard PLAStrength XY, MPa57.3Strength Z, MPa28.4Modulus XY, GPa1.9Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C50–75Chamber, °CnoneDrying, °C, h50–606 h
Eryone Standard PLAEryone
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Eryone, Technical Data Sheet (TDS) Standard PLA14 values | |||
| Tensile modulus XY | 1902.1 MPap. 2: Elastic modulus X-Y | GB/T 1040As the sheet prints it: GB/T 1040.1-2006; rate=50mm/min | in the median |
| Tensile modulus Z (X-Z) | 1823.9 MPap. 2: Elastic modulus X-Z | GB/T 1040As the sheet prints it: GB/T 1040.1-2006; rate=50mm/min | in the median |
| Tensile strength (yield or break not stated) XY | 57.3 MPap. 2: Tensile strength X-Y | GB/T 1040As the sheet prints it: GB/T 1040.4; rate=50mm/min | in the median |
| Tensile strength (yield or break not stated) Z (X-Z) | 28.4 MPap. 2: Tensile strength X-Z | GB/T 1843As the sheet prints it: GB/T 1843; rate=50mm/min | in the median |
| Elongation at break XY | 2.2 %p. 2: Elongation at break X-Y | GB/T 1040As the sheet prints it: GB/T 1040.4; rate=50mm/min | in the median |
| Elongation at break Z (X-Z) | 1.8 %p. 2: Elongation at break X-Z | GB/T 1040As the sheet prints it: GB/T 1040.4; rate=50mm/min | in the median |
| Flexural modulus orientation not stated | 3093.4 MPap. 2: Bending modulus | GB/T 9341As the sheet prints it: GB/T 9341; rate=2mm/min | in the median |
| Flexural strength orientation not stated | 91.1 MPap. 2: Bending strength | GB/T 9341As the sheet prints it: GB/T 9341; rate=2mm/min | in the median |
| Charpy impact strength orientation not stated | 3.6 kJ/m2p. 2: Charpy Impact strenght | GB/T 1843As the sheet prints it: GB/T 1843; energy=2.75J | not in the median: notch not stated |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat distortion temperature(° C) | ASTM D648As the sheet prints it: ASTM D648; 0.45MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 62 ℃p. 1: Glass transition temperature (° C) | DSCAs the sheet prints it: DSC; rate=10 ° C/min | in the median |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temperature(° C) | ASTM D1525, ISO 306, GB/T 1633As the sheet prints it: ASTM D1525 (ISO 306 GB/T 1633) | |
| Density | 1.24 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) | ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: ASTM D792 (ISO 1183, GB/T 1033) | |
| Melt mass-flow rate | 14 g/10minp. 1: Melt Index(g/10 min) | no standard namedAs the sheet prints it: 220 ° C, 10kg 240 ° C, 2.16 kg | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 50–75 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-220 ℃; Bed 50-75℃; Drying 50-60℃, 6hEryone, Technical Data Sheet (TDS) Standard PLAp. 1: Nozzle temperature, Bed temperature, Sealed printing; p. 1: Drying conditions; p. 1: Bed material
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Benefits
Eryone Standard PLA filament is an excellent choice for beginners in 3D printing, offering outstanding shaping capabilities and ease of use.
Eryone, Technical Data Sheet (TDS) Standard PLAp. 1 - Benefits
Whether for beginners or professionals, it is easy to work with, minimizing issues like clogging and warping.
Eryone, Technical Data Sheet (TDS) Standard PLAp. 1 - Surface finish
The filament features a smooth and delicate surface with minimal layer lines
Eryone, Technical Data Sheet (TDS) Standard PLAp. 1 - Adhesion between layers
strong interlayer adhesion to ensure stable print quality.
Eryone, Technical Data Sheet (TDS) Standard PLAp. 1 - Odour and emissions
It is bubble-free, odorless, biodegradable, environmentally friendly, and safe.
Eryone, Technical Data Sheet (TDS) Standard PLAp. 1
eSUN PLA Basic ENStrength XY, MPa64.3Strength Z, MPa32.3Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C54HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C45–60Chamber, °CnoneDrying, °C, h508–12 h
eSUN PLA Basic ENeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
eSUN, PLA-Basic Technical Data Sheet12 valuesThe same values also in eSUN, PLA - Basic Technical Data Sheet and eSUN, PLA Basic Technical Data Sheet.Unless a row says otherwise: printed specimenprint settingsExtruder Temperature 220℃; Build Platform Temperature 65℃; Outer Layer Number 2; Top/Bottom Layer Number 3; Infill Density 100%; Fan Speed 100%; Based on Bambu P1S 0.4mm nozzle and Orcaslicer 2.1.0 Beta | |||
| Tensile strength (yield or break not stated) XY | 64.27 Mpap. 2: Tensile Strength (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 32.34 MPap. 2: Tensile Strength (Z) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break XY | 4.61 %p. 2: Elongation at Break (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break Z | 2.89 %p. 2: Elongation at Break (Z) GB/T 1040 | GB/T 1040 | in the median |
| Flexural modulus XY | 3775.06 MPap. 2: Flexural Modulus (X-Y) GB/T 9341 | GB/T 9341 | in the median |
| Flexural modulus Z | 3285.49 Mpap. 2: Flexural Modulus (Z) GB/T 9341 | GB/T 9341 | in the median |
| Flexural strength XY | 106.8 MPap. 2: Flexural Strength (X-Y) GB/T 9341 | GB/T 9341 | in the median |
| Flexural strength Z | 53.2 Mpap. 2: Flexural Strength (Z) GB/T 9341 | GB/T 9341 | in the median |
| Izod impact strength XY | 3.25 KJ/m²p. 2: IZOD Impact Strength (X-Y) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| Izod impact strength Z | 2.31 KJ/m²p. 2: IZOD Impact Strength (Z) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| HDT at 0.45 MPa | 53.65 ℃p. 1: Heat Distortion Temperature GB/T 1634 | GB/T 1634As the sheet prints it: GB/T 1634 0.45Mpa | in the median |
| Density | 1.24 g/cm3p. 1: Density GB/T 1033also in eSUN, PLA - Basic Technical Data Sheetalso in eSUN, PLA Basic Technical Data Sheet | specimen not stated, GB/T 1033print settings not stated | |
eSUN, PLA - Basic Technical Data Sheet11 valuesThe same values also in eSUN, PLA Basic Technical Data Sheet.Unless a row says otherwise: printed specimenprint settingsExtruder Temperature 230℃; Build Platform Temperature 60℃; Outer Layer Number 2; Top/ Bottom Layer Number 3; Infill Density 100%; Fan Speed 100%; Based on Bambu P1S 0.4 mm nozzle and Orcaslicer 2.1.0 Beta | |||
| Tensile strength (yield or break not stated) XY | 63.95 Mpap. 2: Tensile Strength (X-Y) GB/T 1040 | GB/T 1040 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Tensile strength (yield or break not stated) Z | 28.29 MPap. 2: Tensile Strength (Z) GB/T 1040 | GB/T 1040 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Elongation at break XY | 4.17 %p. 2: Elongation at Break (X-Y) GB/T 1040 | GB/T 1040 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Elongation at break Z | 2.41 %p. 2: Elongation at Break (Z) GB/T 1040 | GB/T 1040 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Flexural modulus XY | 3085.87 MPap. 2: Flexural Modulus (X-Y) GB/T 9341 | GB/T 9341 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Flexural modulus Z | 2832.46 Mpap. 2: Flexural Modulus (Z) GB/T 9341 | GB/T 9341 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Flexural strength XY | 101.2 MPap. 2: Flexural Strength (X-Y) GB/T 9341 | GB/T 9341 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Flexural strength Z | 40.5 Mpap. 2: Flexural Strength (Z) GB/T 9341 | GB/T 9341 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Izod impact strength XY | 3.09 KJ/m²p. 2: IZOD Impact Strength (X-Y) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| Izod impact strength Z | 2.15 KJ/m²p. 2: IZOD Impact Strength (Z) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| HDT at 0.45 MPa | 50-60 ℃p. 1: Heat Distortion Temperature GB/T 1634also in eSUN, PLA Basic Technical Data Sheet | GB/T 1634As the sheet prints it: GB/T 1634 0.45Mpa | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| eSUN, PLA Basic Technical Data Sheet5 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 20-30 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 5-10 %p. 1: Elongation at Break | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 3111.8 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 101.2 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 3.05 kJ/m2p. 1: IZOD Impact Strength GB/T 1843 | GB/T 1843 | not in the median: measured on a moulded bar |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 50 °C for 8–12 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 3 print profiles, in the documents' words
- Nozzle 210-230℃; Bed 45~60℃; Drying 50℃,8~12heSUN, PLA-Basic Technical Data Sheetp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Drying Preparation; p. 2: Build Platform Type
- Nozzle 210-230℃; Bed 45-60℃; Drying 50℃ > 8HeSUN, PLA - Basic Technical Data Sheetp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Drying Preparation; p. 2: Build Platform Type
- Nozzle 210 - 230℃; Bed 45-60°CeSUN, PLA Basic Technical Data Sheetp. 2: Recommended printing settings: Extruder Temperature, Build Platform Temperature; p. 2: Based on
Price
Not in the price sample.
Its 4 documents
What the maker says (9)
- Benefits
Good toughness
eSUN, PLA-Basic Technical Data Sheetp. 1 - Benefits
Hard to break
eSUN, PLA-Basic Technical Data Sheetp. 1 - Benefits
Based on modified PLA,thisaffordable filament is easy to print, emits no irritating odors, resists stringing and warping, and delivers excellentprint quality.
eSUN, PLA-Basic Technical Data Sheetp. 1 - Precision and tolerance
High forming accuracy
eSUN, PLA-Basic Technical Data Sheetp. 1 - Surface finish
Smooth surface and neat layer lines
eSUN, PLA-Basic Technical Data Sheetp. 1 - Benefits
Based on modified PLA,this affordable filament is easy to print, emits no irritating odors, resists stringing and warping, and delivers excellent print quality.
eSUN, PLA - Basic Technical Data Sheetp. 1 - Good for
Early Concept Model • Rapid Prototype Design
eSUN, PLA Basic Technical Data Sheetp. 1 - Benefits
High speed printing
eSUN, PLA Basic Technical Data Sheetp. 1 - Benefits
PLA-basic material is easy to print, does not produce irritating odor, it is not easy to draw, the finished product does not warp, and has good molding quality.
eSUN, PLA Basic Technical Data Sheetp. 1
eSUN PLA Cast ENStrength XY, MPa53.5Strength Z, MPa30.6Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C56HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–220Bed, °C55–65Chamber, °CnoneDrying, °C, h50≥ 8 h
eSUN PLA Cast ENeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
eSUN, PLA-Cast Technical Data Sheet12 valuesUnless a row says otherwise: printed specimenprint settingsExtruder Temperature 220℃; Build Platform Temperature 65℃; Outer Layer Number 2; Top/Bottom Layer Number 3; Infill Density 100%; Fan Speed 100%; Based on Bambu P1S 0.4mm nozzle and Orcaslicer 2.1.0 Beta | |||
| Tensile strength (yield or break not stated) XY | 53.51 Mpap. 2: Tensile Strength (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 30.55 MPap. 2: Tensile Strength (Z) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break XY | 4.6 %p. 2: Elongation at Break (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break Z | 3.12 %p. 2: Elongation at Break (Z) GB/T 1040 | GB/T 1040 | in the median |
| Flexural modulus XY | 3072.34 MPap. 2: Flexural Modulus (X-Y) GB/T 9341 | GB/T 9341 | in the median |
| Flexural modulus Z | 2743.65 Mpap. 2: Flexural Modulus (Z) GB/T 9341 | GB/T 9341 | in the median |
| Flexural strength XY | 78.9 MPap. 2: Flexural Strength (X-Y) GB/T 9341 | GB/T 9341 | in the median |
| Flexural strength Z | 52.6 Mpap. 2: Flexural Strength (Z) GB/T 9341 | GB/T 9341 | in the median |
| Izod impact strength XY | 4.55 KJ/m²p. 2: IZOD Impact Strength (X-Y) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| Izod impact strength Z | 2.62 KJ/m²p. 2: IZOD Impact Strength (Z) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| HDT at 0.45 MPa | 55.55 ℃p. 1: Heat Distortion Temperature GB/T 1634 | GB/T 1634As the sheet prints it: GB/T 1634 0.45Mpa | in the median |
| Density | 1.24 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033print settings not stated | |
Print settings
- Nozzle
- 200–220 °Cown data sheet
- Bed
- 55–65 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 50 °C for ≥ 8 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 200~220℃; Bed 55~65℃; Drying 50℃>8HeSUN, PLA-Cast Technical Data Sheetp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Drying Preparation; p. 2: Build Platform Type
Price
Not in the price sample.
Its 2 documents
What the maker says (6)
- Good for
PLA-Cast is a material for conventional casting that is easy to print, has excellent molding results, a smooth surface, and a neat layer.
eSUN, PLA-Cast Technical Data Sheetp. 1 - Good for
Balanced strength, stiffness, toughness, and low ash content, it is ideal for casting part printing and can be used for concept models and rapid prototyping.
eSUN, PLA-Cast Technical Data Sheetp. 1 - Benefits
Good toughness
eSUN, PLA-Cast Technical Data Sheetp. 1 - Benefits
Hard to break
eSUN, PLA-Cast Technical Data Sheetp. 1 - Precision and tolerance
High forming accuracy
eSUN, PLA-Cast Technical Data Sheetp. 1 - Surface finish
Smooth surface and neat layer lines
eSUN, PLA-Cast Technical Data Sheetp. 1
eSUN PLA HFStrength XY, MPa64.3Strength Z, MPa33.9Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C52HDT 1.8, °C—Price, CAD/kg18Nozzle, °C210–230Bed, °C45–65Chamber, °CnoneDrying, °C, h508–12 h
eSUN PLA HFeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
eSUN, PLA-HF Technical Data Sheet12 valuesUnless a row says otherwise: printed specimenprint settingsExtruder Temperature 220℃; Build Platform Temperature 65℃; Outer Layer Number 2; Top/Bottom Layer Number 3; Infill Density 100%; Fan Speed 100%; Based on Bambu P1S 0.4mm nozzle and Orcaslicer 2.1.0 Beta | |||
| Tensile strength (yield or break not stated) XY | 64.28 Mpap. 2: Tensile Strength (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 33.9 MPap. 2: Tensile Strength (Z) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break XY | 5.19 %p. 2: Elongation at Break (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break Z | 2.8 %p. 2: Elongation at Break (Z) GB/T 1040 | GB/T 1040 | in the median |
| Flexural modulus XY | 3403.33 MPap. 2: Flexural Modulus (X-Y) GB/T 9341 | GB/T 9341 | in the median |
| Flexural modulus Z | 3152.18 Mpap. 2: Flexural Modulus (Z) GB/T 9341 | GB/T 9341 | in the median |
| Flexural strength XY | 100 MPap. 2: Flexural Strength (X-Y) GB/T 9341 | GB/T 9341 | in the median |
| Flexural strength Z | 65.3 Mpap. 2: Flexural Strength (Z) GB/T 9341 | GB/T 9341 | in the median |
| Izod impact strength XY | 5.33 KJ/m²p. 2: IZOD Impact Strength (X-Y) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| Izod impact strength Z | 2.02 KJ/m²p. 2: IZOD Impact Strength (Z) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| HDT at 0.45 MPa | 52.45 ℃p. 1: Heat Distortion Temperature GB/T 1634 | GB/T 1634As the sheet prints it: GB/T 1634 0.45Mpa | in the median |
| Density | 1.24 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033print settings not stated | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 45–65 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 50 °C for 8–12 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 210-230℃; Bed 45~65℃; Drying 50℃,8~12heSUN, PLA-HF Technical Data Sheetp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Drying Preparation; p. 2: Build Platform Type
Price
18 CAD/kgits one regular price in the sample
1 listing
- DigitMakers: 18 CAD/kgESUN PLA-HF Filament 1kg 1.75mm - Various Colours / White (SKU ESUN-PLA-HF-1.75MM-1KG-WHT)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (7)
- Good for
can be used for conceptual modeling and rapid prototyping.
eSUN, PLA-HF Technical Data Sheetp. 1 - Benefits
Good toughness
eSUN, PLA-HF Technical Data Sheetp. 1 - Benefits
Hard to break
eSUN, PLA-HF Technical Data Sheetp. 1 - Benefits
PLA-HF is a high-speed printing material that is easy to print, has excellent forming effects, a smooth surface, and neat layering.
eSUN, PLA-HF Technical Data Sheetp. 1 - Benefits
Strength, stiffness, toughness balance, low ash content, very suitable for conventional and high-speed printing
eSUN, PLA-HF Technical Data Sheetp. 1 - Precision and tolerance
High forming accuracy
eSUN, PLA-HF Technical Data Sheetp. 1 - Surface finish
Smooth surface and neat layer lines
eSUN, PLA-HF Technical Data Sheetp. 1
eSUN PLA-MatteStrength XY, MPa26Strength Z, MPa14.3Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C51HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C45–60Chamber, °CnoneDrying, °C, h50≥ 8 h
eSUN PLA-MatteeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
eSUN, Technical Data Sheet PLA-Matte12 valuesUnless a row says otherwise: printed specimenprint settingsExtruder Temperature 220℃; Build Platform Temperature 60℃; Outer Layer Number 2; Top/Bottom Layer Number 3; Infill Density 100%; Fan Speed 100%; Based on Bambu P1S 0.4 mm nozzle and Orcaslicer 2.1.0 Beta | |||
| Tensile strength (yield or break not stated) XY | 25.976 Mpap. 2: Tensile Strength (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 14.31 MPap. 2: Tensile Strength (Z) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break XY | 7.23 %p. 2: Elongation at Break (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break Z | 2.26 %p. 2: Elongation at Break (Z) GB/T 1040 | GB/T 1040 | in the median |
| Flexural modulus XY | 2249.05 MPap. 2: Flexural Modulus (X-Y) GB/T 9341 | GB/T 9341 | in the median |
| Flexural modulus Z | 1782.62 Mpap. 2: Flexural Modulus (Z) GB/T 9341 | GB/T 9341 | in the median |
| Flexural strength XY | 42.6 MPap. 2: Flexural Strength (X-Y) GB/T 9341 | GB/T 9341 | in the median |
| Flexural strength Z | 21.1 Mpap. 2: Flexural Strength (Z) GB/T 9341 | GB/T 9341 | in the median |
| Izod impact strength XY | 4.7 KJ/m²p. 2: IZOD Impact Strength (X-Y) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| Izod impact strength Z | 2.15 KJ/m²p. 2: IZOD Impact Strength (Z) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| HDT at 0.45 MPa | 51 ℃p. 1: Heat Distortion Temperature GB/T 1634 | GB/T 1634As the sheet prints it: GB/T 1634 0.45Mpa | in the median |
| Density | 1.329 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033print settings not stated | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 50 °C for ≥ 8 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-230℃; Bed 45-60℃; Drying 50℃ >8HeSUN, Technical Data Sheet PLA-Mattep. 2: Recommended printing settings: Nozzle Temperature; p. 2: Drying Preparation; p. 2: Build Platform Type
Price
Not in the price sample.
Its 2 documents
What the maker says (10)
- Good for
can be used for early concept models and rapid prototyping.
eSUN, Technical Data Sheet PLA-Mattep. 1 - Benefits
Excellent printability
eSUN, Technical Data Sheet PLA-Mattep. 1 - Benefits
PLA-Matte is a cost-effective PLA material that is environmentally friendly and easy to print.
eSUN, Technical Data Sheet PLA-Mattep. 1 - Benefits
the filaments are not easy to break, long-term printing is smooth without clogging
eSUN, Technical Data Sheet PLA-Mattep. 1 - Benefits
High speed printing
eSUN, Technical Data Sheet PLA-Mattep. 1 - Warping and shrinkage
no warping, no cracking and it can print large-size models
eSUN, Technical Data Sheet PLA-Mattep. 1 - Surface finish
matte surface effect, fine surface without layer lines
eSUN, Technical Data Sheet PLA-Mattep. 1 - Odour and emissions
there will be no irritating odor during printing, which is safe and environmentally friendly
eSUN, Technical Data Sheet PLA-Mattep. 1 - Supports and removal
Support easy to peel off
eSUN, Technical Data Sheet PLA-Mattep. 1 - Supports and removal
compared to other materials, the support is easier to peel from the surface of the model and the contact surface is smooth and flat
eSUN, Technical Data Sheet PLA-Mattep. 1
eSUN PLA+Strength XY, MPa70.4Strength Z, MPa36.4Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C54HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C45–60Chamber, °CnoneDrying, °C, h508–12 h
eSUN PLA+eSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
eSUN, PLA+ Technical Data Sheet12 valuesUnless a row says otherwise: printed specimenprint settingsExtruder Temperature 220℃; Build Platform Temperature 65℃; Outer Layer Number 2; Top/Bottom Layer Number 3; Infill Density 100%; Fan Speed 100%; Based on Bambu P1S 0.4mm nozzle and Orcaslicer 2.1.0 Beta | |||
| Tensile strength (yield or break not stated) XY | 70.37 Mpap. 2: Tensile Strength (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 36.36 MPap. 2: Tensile Strength (Z) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break XY | 4.14 %p. 2: Elongation at Break (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break Z | 2.92 %p. 2: Elongation at Break (Z) GB/T 1040 | GB/T 1040 | in the median |
| Flexural modulus XY | 3259.39 MPap. 2: Flexural Modulus (X-Y) GB/T 9341 | GB/T 9341 | in the median |
| Flexural modulus Z | 2873.94 Mpap. 2: Flexural Modulus (Z) GB/T 9341 | GB/T 9341 | in the median |
| Flexural strength XY | 100.3 MPap. 2: Flexural Strength (X-Y) GB/T 9341 | GB/T 9341 | in the median |
| Flexural strength Z | 56.4 Mpap. 2: Flexural Strength (Z) GB/T 9341 | GB/T 9341 | in the median |
| Izod impact strength XY | 7.27 KJ/m²p. 2: IZOD Impact Strength (X-Y) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| Izod impact strength Z | 2.22 KJ/m²p. 2: IZOD Impact Strength (Z) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| HDT at 0.45 MPa | 53.78 ℃p. 1: Heat Distortion Temperature GB/T 1634 | GB/T 1634As the sheet prints it: GB/T 1634 0.45Mpa | in the median |
| Density | 1.24 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033print settings not stated | |
| eSUN, PLA+ Technical Data Sheet7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) | 63 MPap. 1: Tensile Strength | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break | 20 %p. 1: Elongation at Break | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus | 1973 MPap. 1: Flexural Modulus | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength | 74 MPap. 1: Flexural Strength | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 9 kJ/m²p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT | 53 ℃p. 1: Heat distortion Temperature | GB/T 1634 | not in the median: measured on a moulded bar |
| Density | 1.23 g/cm³p. 1: Density | GB/T 1033 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 50 °C for 8–12 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 210-230℃; Bed 45~60℃; Drying 50℃,8~12heSUN, PLA+ Technical Data Sheetp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Drying Preparation; p. 2: Build Platform Type
- Nozzle 210- 230℃; Bed 45-60°CeSUN, PLA+ Technical Data Sheetp. 2: Extruder Temperature, Build Platform Temperature
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- 3D Printing Canada: 25 per kg, sale priceLight Beige - eSun PLA+ Filament - 1.75mm, 1kg (SKU 6a989c57639a0)not used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 3 documents
What the maker says (10)
- Good for
Prototyping • Decoration
eSUN, PLA+ Technical Data Sheetp. 1 - Good for
Good strength, rigidity, toughness balance, strong impact resistance, very suitable for functional parts printing
eSUN, PLA+ Technical Data Sheetp. 1 - Benefits
Approved by FDA, safer to use
eSUN, PLA+ Technical Data Sheetp. 1 - Surface finish
Smooth printed surface
eSUN, PLA+ Technical Data Sheetp. 1 - Adhesion between layers
The product is modified based on PLA material, easy to print , in addition ,it improves the toughness and layer adhereance.
eSUN, PLA+ Technical Data Sheetp. 1 - Benefits
Good toughness
eSUN, PLA+ Technical Data Sheetp. 1 - Benefits
Hard to break
eSUN, PLA+ Technical Data Sheetp. 1 - Benefits
FDA-certified material, the strength is significantly improved compared with ordinary PLA
eSUN, PLA+ Technical Data Sheetp. 1 - Precision and tolerance
High forming accuracy
eSUN, PLA+ Technical Data Sheetp. 1 - Surface finish
Smooth surface and neat layer lines
eSUN, PLA+ Technical Data Sheetp. 1
eSUN PLA+HSStrength XY, MPa53.1Strength Z, MPa32Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C54HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C45–60Chamber, °CnoneDrying, °C, h50≥ 8 h
eSUN PLA+HSeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
eSUN, Technical Data Sheet PLA+HS12 valuesUnless a row says otherwise: printed specimenprint settingsExtruder Temperature 220℃; Build Platform Temperature 60℃; Outer Layer Number 2; Top/Bottom Layer Number 3; Infill Density 100%; Fan Speed 100%; Based on Bambu P1S 0.4 mm nozzle and Orcaslicer 2.1.0 Beta | |||
| Tensile strength (yield or break not stated) XY | 53.12 Mpap. 2: Tensile Strength (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 32 MPap. 2: Tensile Strength (Z) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break XY | 4.01 %p. 2: Elongation at Break (X-Y) GB/T 1040 | GB/T 1040 | in the median |
| Elongation at break Z | 2.8 %p. 2: Elongation at Break (Z) GB/T 1040 | GB/T 1040 | in the median |
| Flexural modulus XY | 2900 MPap. 2: Flexural Modulus (X-Y) GB/T 9341 | GB/T 9341 | in the median |
| Flexural modulus Z | 2680.2 Mpap. 2: Flexural Modulus (Z) GB/T 9341 | GB/T 9341 | in the median |
| Flexural strength XY | 83 MPap. 2: Flexural Strength (X-Y) GB/T 9341 | GB/T 9341 | in the median |
| Flexural strength Z | 58.6 Mpap. 2: Flexural Strength (Z) GB/T 9341 | GB/T 9341 | in the median |
| Izod impact strength XY | 5.6 KJ/m²p. 2: IZOD Impact Strength (X-Y) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| Izod impact strength Z | 2.41 KJ/m²p. 2: IZOD Impact Strength (Z) GB/T 1843 | GB/T 1843 | not in the median: notch not stated |
| HDT at 0.45 MPa | 54 ℃p. 1: Heat Distortion Temperature GB/T 1634 | GB/T 1634As the sheet prints it: GB/T 1634 0.45Mpa | in the median |
| Density | 1.24 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033print settings not stated | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 50 °C for ≥ 8 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 210-230℃; Bed 45-60℃; Drying 50℃ >8HeSUN, Technical Data Sheet PLA+HSp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Drying Preparation; p. 2: Build Platform Type
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Good for
Electronics and electrical appliances
eSUN, Technical Data Sheet PLA+HSp. 1 - Benefits
Excellent printability
eSUN, Technical Data Sheet PLA+HSp. 1 - Adhesion between layers
With faster printing speeds and better fluidity,it ensures excellent interlayer adhesion and printing accuracy is maintained even during high-speed printing
eSUN, Technical Data Sheet PLA+HSp. 1
Polymaker PolyLite PLAStrength XY, MPa46.6Strength Z, MPa43.5Modulus XY, GPa2.64Charpy notched, kJ/m²—HDT 0.45, °C60HDT 1.8, °C58Price, CAD/kg35Nozzle, °C190–230Bed, °C25–60Chamber, °C25–45Drying, °C, h508 h
Polymaker PolyLite PLAPolymaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Polymaker, PolyLite PLA16 valuesThe same values also in Polymaker, Jun. 2017 Technical Data Sheet Version 3.0 PolyLite™ PLA. | |||
| Tensile modulus XY | 2636 ± 330 MPap. 4: Young’s modulus (X-Y)also in Polymaker, Jun. 2017 Technical Data Sheet Version 3.0 PolyLite™ PLA | ISO 527, GB/T 1040print settingsPrinting temperature 205 °C; Bed temperature 40 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | in the median |
| Tensile strength (yield or break not stated) XY | 46.6 ± 0.9 MPap. 4: Tensile strength (X-Y)also in Polymaker, Jun. 2017 Technical Data Sheet Version 3.0 PolyLite™ PLA | ISO 527, GB/T 1040print settingsPrinting temperature 205 °C; Bed temperature 40 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | in the median |
| Tensile strength (yield or break not stated) Z | 43.5 ± 3.1 MPap. 4: Tensile strength (Z)also in Polymaker, Jun. 2017 Technical Data Sheet Version 3.0 PolyLite™ PLA | ISO 527, GB/T 1040print settingsPrinting temperature 205 °C; Bed temperature 40 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | in the median |
| Elongation at break XY | 1.90 ± 0.21 %p. 4: Elongation at break (X-Y) | ISO 527, GB/T 1040print settingsPrinting temperature 205 °C; Bed temperature 40 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | in the median |
| Flexural modulus XY | 3283 ± 132 MPap. 4: Bending modulus (X-Y) | ISO 178, GB/T 9341print settingsPrinting temperature 205 °C; Bed temperature 40 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | in the median |
| Flexural strength XY | 85.1 ± 2.9 MPap. 4: Bending strength (X-Y) | ISO 178, GB/T 9341print settingsPrinting temperature 205 °C; Bed temperature 40 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | in the median |
| Charpy impact strength XY | 2.68 ± 0.16 kJ/m2p. 4: Charpy impact strength (X-Y) | ISO 179, GB/T 1043print settingsPrinting temperature 205 °C; Bed temperature 40 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: notch not stated |
| HDT at 0.45 MPa | 59.8 °Cp. 3: Heat deflection temperature ISO 75 0.45MPa | ISO 75As the sheet prints it: 0.45MPa 75 ISO 75 | in the median |
| HDT at 1.8 MPa | 58.1 °Cp. 3: Heat deflection temperature ISO 75 1.8MPa | ISO 75As the sheet prints it: 1.8MPa 75 ISO 75 | in the median |
| Glass transition temperature | 61 °Cp. 3: Glass transition temperature DSC, 10°C/minalso in Polymaker, Jun. 2017 Technical Data Sheet Version 3.0 PolyLite™ PLA | DSC | in the median |
| Vicat softening temperature | 62.9 °Cp. 3: Vicat softening temperature ISO 306, GB/T 1633 | ISO 306, GB/T 1633As the sheet prints it: 306 ISO 306 GB/T 1633 | |
| Melting temperature | 150 °Cp. 3: Melting temperature DSC, 10°C/min | DSC | |
| Crystallization temperature | 113.5 °Cp. 3: Crystallization temperature DSC, 10°C/min | DSC | |
| Density | 1.17 g/cm3p. 2: Density ISO1183, GB/T1033 | ISO 1183, GB/T 1033As the sheet prints it: 1183 ISO1183 GB/T1033 | |
| Water absorption | 0.51 %p. 2: Equilibrium water absorption (%)= | no standard stated | |
| Melt mass-flow rate | 7-11 g/10minp. 2: Melt index 210°C, 2.16kgalso in Polymaker, Jun. 2017 Technical Data Sheet Version 3.0 PolyLite™ PLA | no standard namedAs the sheet prints it: 210°C 2.16kg | |
Polymaker, Jun. 2017 Technical Data Sheet Version 3.0 PolyLite™ PLA5 valuesUnless a row says otherwise: printed specimenmoistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsnozzle temperature = 205 °C, printing speed = 60 mm/s, build plate temperature = 40 °C, infill = 100% | |||
| Elongation at break XY | 1.9 ± 0.2 %p. 1: Elongation at break (X-Y) ASTM D638 (ISO 527, GB/T 1040) | ASTM D638, ISO 527, GB/T 1040 | not in the median: another value of this product is in it |
| Flexural modulus orientation not stated | 3283 ± 132 MPap. 1: Bending modulus ASTMD790 (ISO 178, GB/T 9341) | ASTM D790, ISO 178, GB/T 9341As the sheet prints it: 790 ASTMD790 ISO 178 GB/T 9341 | not in the median: another value of this product is in it |
| Flexural strength orientation not stated | 85.1 ± 2.9 MPap. 1: Bending strength ASTMD790 (ISO 178, GB/T 9341) | ASTM D790, ISO 178, GB/T 9341As the sheet prints it: 790 ASTMD790 ISO 178 GB/T 9341 | not in the median: another value of this product is in it |
| Impact strength, test unclear | 2.7 ± 0.2 kJ/m2p. 1: Charpy impact strength ASTM D256 (ISO 179, GB/T 1043) | ASTM D256, ISO 179, GB/T 1043As the sheet prints it: 256 ASTM D256 ISO 179 GB/T 1043 | listed under other properties |
| Density | 1.17-1.24 g/cm3p. 1: Density ASTM D792 (ISO 1183, GB/T 1033) | ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: 792 ASTM D792 ISO 1183 GB/T 1033 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 190 – 230 (℃); Bed 25 - 60 (˚C); Chamber Room temperaturePolymaker, PolyLite PLAp. 4: Recommended printing settings: Nozzle temperature; p. 4: Environmental temperature; p. 4: Based on 0.4 mm nozzle
- Nozzle 190 - 220 (˚C); Bed 40 - 55 (˚C); Chamber Room temperature - 45 (˚C)Polymaker, Jun. 2017 Technical Data Sheet Version 3.0 PolyLite™ PLAp. 1: Recommended printing settings: Nozzle temperature; p. 1: Recommended environmental temperature; p. 1: Based on 0.4 mm nozzle; p. 1: Build Surface material
Price
35 CAD/kgthe median of its 3 regular prices in the sample
3 listings
- DigitMakers: 35 CAD/kgPolyLite™ PLA (1.75mm 1000g) - Various Colours / Natural (SKU PLMK-FL-PLITE-PLA-1.75-1000G-NTRL)in its price; seen 30 Sep 2026
- MakerWiz: 40 CAD/kgPolymaker PolyLite™ PLA Filament - 1.75 mm, 1 kg (11 Colours) / Black / 1.75 mm (SKU 61000501)in its price; seen 30 Sep 2026
- Voxel Factory: 28 CAD/kgPolymaker PolyLite PLA 1.75mm 1kg / Black (SKU PMK-PLA-BLK-175-1KG)in its price; seen 30 Sep 2026
Its 3 documents
What the maker says (1)
- Supports and removal
Recommended support material PolySupport™ and PolyDissolve™ S1
Polymaker, PolyLite PLAp. 4
Chemicals and environment (2)
- Acid resistance: not resistant
Not resistant
Effect of weak acids · weakPolymaker, PolyLite PLAp. 2: Effect of weak acids Not resistant - Acid resistance: not resistant
Not resistant
Effect of strong acids · strongPolymaker, PolyLite PLAp. 2: Effect of strong acids Not resistant
Eryone Hyper Speed Matte PLAStrength XY, MPa32.7Strength Z, MPa8.7Modulus XY, GPa1.35Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C55–70Chamber, °CnoneDrying, °C, h50–606 h
Eryone Hyper Speed Matte PLAEryone
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Eryone, Technical Data Sheet (TDS) Hyper Speed Matte PLA13 valuesUnless a row says otherwise: printed specimenprint settingsprinting temperature=210° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | |||
| Tensile modulus XY | 1345.5 MPap. 2: Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006 | in the median |
| Tensile modulus Z (X-Z) | 1283.9 MPap. 2: Elastic modulus X-Z 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006 | in the median |
| Tensile strength (yield or break not stated) XY | 32.7 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | in the median |
| Tensile strength (yield or break not stated) Z (X-Z) | 8.7 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPa | GB/T 1843As the sheet prints it: 50mm/min GB/T 1843 | in the median |
| Elongation at break XY | 1.2 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | in the median |
| Elongation at break Z (X-Z) | 1.0 %p. 2: Elongation at break X-Z 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | in the median |
| Flexural modulus orientation not stated | 3601.2 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341 | in the median |
| Flexural strength orientation not stated | 63.8 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341 | in the median |
| Impact strength, test unclear | 9.8 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1843 kJ/m2 | GB/T 1843As the sheet prints it: 2.75J GB/T 1843 | listed under other properties |
| HDT at 0.45 MPa | 55 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃ | specimen not stated; its document points to a moulded or resin bar, ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temperature(° C) ASTM D1525 (ISO 306 GB/T 1633) ℃ | specimen not stated, ASTM D1525, ISO 306, GB/T 1633print settings not stated | |
| Density | 1.25 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ | specimen not stated, ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 | |
| Melt mass-flow rate | 6.3 g/10minp. 1: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min | specimen not stated, no standard namedAs the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 55–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190℃-220℃; Bed 55-70℃; Drying 50-60℃, 6hEryone, Technical Data Sheet (TDS) Hyper Speed Matte PLAp. 1: Recommended printing settings; p. 1: Sealed printing
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Benefits
This material can achieve printing speeds of up to 500mm/s, significantly enhancing printing efficiency.
Eryone, Technical Data Sheet (TDS) Hyper Speed Matte PLAp. 1 - Benefits
It is particularly beginner-friendly, easy to shape, and has good scratch and wear resistance, ensuring a stable printing process.
Eryone, Technical Data Sheet (TDS) Hyper Speed Matte PLAp. 1 - Benefits
Additionally, its high surface hardness makes the finished products less susceptible to scratches, making it suitable for various application needs.
Eryone, Technical Data Sheet (TDS) Hyper Speed Matte PLAp. 1 - Surface finish
Eryone-Hyper Speed Matte PLAfilament prints produce a delicate matte surface effect, showcasing a soft and high-end texture with almost no visible layer lines.
Eryone, Technical Data Sheet (TDS) Hyper Speed Matte PLAp. 1
Eryone Hyper-Speed PLAStrength XY, MPa35.7Strength Z, MPa18.1Modulus XY, GPa1.3Charpy notched, kJ/m²—HDT 0.45, °C57HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C50–75Chamber, °CnoneDrying, °C, h50–606 h
Eryone Hyper-Speed PLAEryone
Sold as toughened or impact-modified: "Compared to standard PLA, it exhibits superior toughness" (Eryone, Technical Data Sheet (TDS) Hyper-Speed PLA, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Eryone, Technical Data Sheet (TDS) Hyper-Speed PLA14 values | |||
| Tensile modulus XY | 1302.7 MPap. 2: Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=210 ° C, printing speed=150mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile modulus Z (X-Z) | 873.2 MPap. 2: Elastic modulus X-Z 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006print settingsprinting temperature=210 ° C, printing speed=150mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) XY | 35.7 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=210 ° C, printing speed=150mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Tensile strength (yield or break not stated) Z (X-Z) | 18.1 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPa | GB/T 1843As the sheet prints it: 50mm/min GB/T 1843print settingsprinting temperature=210 ° C, printing speed=150mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Elongation at break XY | 8.7 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=210 ° C, printing speed=150mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Elongation at break Z (X-Z) | 5.1 %p. 2: Elongation at break X-Z 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4print settingsprinting temperature=210 ° C, printing speed=150mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural modulus orientation not stated | 2357.2 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=210 ° C, printing speed=150mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Flexural strength orientation not stated | 55.92 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341print settingsprinting temperature=210 ° C, printing speed=150mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | in the median |
| Impact strength, test unclear | 7.02 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1843 kJ/m2 | GB/T 1843As the sheet prints it: 2.75J GB/T 1843print settingsprinting temperature=210 ° C, printing speed=150mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | listed under other properties |
| HDT at 0.45 MPa | 57 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃ | ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 160 ℃physically implausiblep. 1: Glass transition temperature (° C) DSC, 10 ° C/min ℃ | DSCAs the sheet prints it: ° C DSC | not in the median: physically implausible as published |
| Vicat softening temperature | 57 ℃p. 1: Vicat Softening Temperature(° C) ASTM D1525 (ISO 306 GB/T 1633) ℃ | ASTM D1525, ISO 306, GB/T 1633 | |
| Density | 1.24 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ | ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 | |
| Melt mass-flow rate | 42 ± 4 g/10minp. 1: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min | no standard namedAs the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 50–75 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-220 ℃; Bed 50-75℃; Drying 50-60℃, 6hEryone, Technical Data Sheet (TDS) Hyper-Speed PLAp. 1: Recommended printing settings; p. 1: Sealed printing
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Benefits
The Eryone Hyper-Speed PLA filament is an advanced 3D printing material that offers a maximum printing speed of 600mm/s and exceptional fluidity.
Eryone, Technical Data Sheet (TDS) Hyper-Speed PLAp. 1 - Warping and shrinkage
With minimal expansionand contraction, it enhances the stability and performance of models, making it ideal for applications that require fast prototyping and high precision.
Eryone, Technical Data Sheet (TDS) Hyper-Speed PLAp. 1 - Precision and tolerance
It allows for rapid cooling and shaping, ensuring high precision and quality in printed parts.
Eryone, Technical Data Sheet (TDS) Hyper-Speed PLAp. 1 - Printing advice
Sealed printing supports open printing, and the sealing effect is better if it is sealed
Eryone, Technical Data Sheet (TDS) Hyper-Speed PLAp. 1 - Benefits
Compared to standard PLA, it exhibits superior toughness
Eryone, Technical Data Sheet (TDS) Hyper-Speed PLAp. 1
Eryone Matte PLAStrength XY, MPa34.2Strength Z, MPa11Modulus XY, GPa1.13Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C55–70Chamber, °CnoneDrying, °C, h50–606 h
Eryone Matte PLAEryone
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Eryone, Technical Data Sheet (TDS) Matte PLA13 valuesUnless a row says otherwise: printed specimenprint settingsprinting temperature=210 ° C, printing speed=80mm/s, base plate 60° C, filling=100%, nozzle diameter=0.4mm | |||
| Tensile modulus XY | 1132.3 MPap. 2: Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006 | in the median |
| Tensile modulus Z (X-Z) | 952.5 MPap. 2: Elastic modulus X-Z 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006 | in the median |
| Tensile strength (yield or break not stated) XY | 34.2 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | in the median |
| Tensile strength (yield or break not stated) Z (X-Z) | 11 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPa | GB/T 1843As the sheet prints it: 50mm/min GB/T 1843 | in the median |
| Elongation at break XY | 4.1 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | in the median |
| Elongation at break Z (X-Z) | 2.3 %p. 2: Elongation at break X-Z 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | in the median |
| Flexural modulus orientation not stated | 3021.7 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341 | in the median |
| Flexural strength orientation not stated | 51.3 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341 | in the median |
| Impact strength, test unclear | 8.1 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1843 kJ/m2 | GB/T 1843As the sheet prints it: 2.75J GB/T 1843 | listed under other properties |
| HDT at 0.45 MPa | 55 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃ | specimen not stated; its document points to a moulded or resin bar, ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temperature(° C) ASTM D1525 (ISO 306 GB/T 1633) ℃ | specimen not stated, ASTM D1525, ISO 306, GB/T 1633print settings not stated | |
| Density | 1.25 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ | specimen not stated, ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 | |
| Melt mass-flow rate | 6.3 g/10minp. 1: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min | specimen not stated, no standard namedAs the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 55–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190℃-220 ℃; Bed 55-70℃; Drying 50-60℃, 6hEryone, Technical Data Sheet (TDS) Matte PLAp. 1: Recommended printing settings; p. 1: Sealed printing
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
This filament is very beginner-friendly, easy to shape, and has good scratch and wear resistance.
Eryone, Technical Data Sheet (TDS) Matte PLAp. 1 - Benefits
The printing process is stable, with high surface hardness, making it resistant to scratching.
Eryone, Technical Data Sheet (TDS) Matte PLAp. 1 - Surface finish
Eryone-Matte PLA filament features a delicate matte surface effect that is very soft and free of noticeable layer lines, showcasing a sense of premium quality.
Eryone, Technical Data Sheet (TDS) Matte PLAp. 1
Eryone PLA+Strength XY, MPa57.3Strength Z, MPa32.2Modulus XY, GPa1.75Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg27Nozzle, °C190–220Bed, °C55–70Chamber, °CnoneDrying, °C, h606 h
Eryone PLA+Eryone
Sold as toughened or impact-modified: "shows significant improvements in hardness and toughness" (Eryone, Technical Data Sheet (TDS) PLA+, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Eryone, Technical Data Sheet (TDS) PLA+13 valuesUnless a row says otherwise: printed specimenprint settingsprinting temperature=210° C, printing speed=80mm/s, base plate 60 ° C, filling=100%, nozzle diameter=0.4mm | |||
| Tensile modulus XY | 1751.0 MPap. 2: Elastic modulus X-Y 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006 | in the median |
| Tensile modulus Z (X-Z) | 1431.7 MPap. 2: Elastic modulus X-Z 50mm/min GB/T 1040.1-2006 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.1-2006 | in the median |
| Tensile strength (yield or break not stated) XY | 57.3 MPap. 2: Tensile strength X-Y 50mm/min GB/T 1040.4 MPa | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | in the median |
| Tensile strength (yield or break not stated) Z (X-Z) | 32.2 MPap. 2: Tensile strength X-Z 50mm/min GB/T 1843 MPa | GB/T 1843As the sheet prints it: 50mm/min GB/T 1843 | in the median |
| Elongation at break XY | 4.2 %p. 2: Elongation at break X-Y 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | in the median |
| Elongation at break Z (X-Z) | 3.1 %p. 2: Elongation at break X-Z 50mm/min GB/T 1040.4 % | GB/T 1040As the sheet prints it: 50mm/min GB/T 1040.4 | in the median |
| Flexural modulus orientation not stated | 3212.8 MPap. 2: Bending modulus 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341 | in the median |
| Flexural strength orientation not stated | 90.2 MPap. 2: Bending strength 2mm/min GB/T 9341 MPa | GB/T 9341As the sheet prints it: 2mm/min GB/T 9341 | in the median |
| Impact strength, test unclear | 4.2 kJ/m2p. 2: Charpy Impact strenght 2.75J GB/T 1843 kJ/m2 | GB/T 1843As the sheet prints it: 2.75J GB/T 1843 | listed under other properties |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat distortion temperature(° C) ASTM D648 0.45MPa ℃ | specimen not stated; its document points to a moulded or resin bar, ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temperature(° C) ASTM D1525 (ISO 306 GB/T 1633) ℃ | specimen not stated, ASTM D1525, ISO 306, GB/T 1633print settings not stated | |
| Density | 1.23 g/cm³p. 1: Density(g/cm³ at 21.5 ° C) ASTM D792 (ISO 1183, GB/T 1033) g/cm³ | specimen not stated, ASTM D792, ISO 1183, GB/T 1033As the sheet prints it: g/cm³ at 21.5 ° C) ASTM D792 ISO 1183 GB/T 1033 | |
| Melt mass-flow rate | 6.3 g/10minp. 1: Melt Index(g/10 min) 220 ° C, 10kg 240 ° C, 2.16 kg g/10min | specimen not stated, no standard namedAs the sheet prints it: g/10 min 220 ° C 10kg 240 ° C 2.16 kg | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 55–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 60 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190℃-220℃; Bed 55-70℃; Drying 50 -60 ,6hEryone, Technical Data Sheet (TDS) PLA+p. 1: Recommended printing settings; p. 1: Drying conditions; p. 1: Sealed printing
Price
27 CAD/kgits one regular price in the sample
1 listing
- ERYONE Canada: 27 CAD/kgPLA+ Filament - 1.75mm±0.03mm (1kg) / PLA+ Black (SKU B0101048)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (3)
- Good for
Its high quality simplifies the printing process, making it suitable for parts that need to withstand pressure and impact, offering great durability and resistance to breakage.
Eryone, Technical Data Sheet (TDS) PLA+p. 1 - Surface finish
The Eryone PLA+ filament is a printing material known for its exceptional toughness and excellent surface quality, featuring a smooth finish that minimizes layer lines.
Eryone, Technical Data Sheet (TDS) PLA+p. 1 - Benefits
shows significant improvements in hardness and toughness
Eryone, Technical Data Sheet (TDS) PLA+p. 1
eSUN PLA-LiteStrength XY, MPa53Strength Z, MPa26.9Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C45–60Chamber, °CnoneDrying, °C, h508 h
eSUN PLA-LiteeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, eSUN PLA-Lite product page13 valuesThe same values also in eSUN, PLA-Lite.Unless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile strength (yield or break not stated) XY | 53.05 MPaMechanical Properties: Tensile Strength (XY) | no standard stated | in the median |
| Tensile strength (yield or break not stated) Z | 26.88 MPaMechanical Properties: Tensile Strength (Z) | no standard stated | in the median |
| Elongation at break XY | 3.89 %Mechanical Properties: Elongation at Break (XY) | no standard stated | in the median |
| Elongation at break Z | 2.39 %Mechanical Properties: Elongation at Break (Z) | no standard stated | in the median |
| Flexural modulus XY | 3114.92 MPaMechanical Properties: Flexural Modulus (XY) | no standard stated | in the median |
| Flexural modulus Z | 2832.91 MPaMechanical Properties: Flexural Modulus (Z) | no standard stated | in the median |
| Flexural strength XY | 90.57 MPaMechanical Properties: Flexural Strength (XY) | no standard stated | in the median |
| Flexural strength Z | 62.2 MPaMechanical Properties: Flexural Strength (Z) | no standard stated | in the median |
| Izod impact strength XY | 4.53 kJ/m²Mechanical Properties: IZOD Impact Strength (XY) | no standard stated | not in the median: notch not stated |
| Izod impact strength Z | 2.33 kJ/m²Mechanical Properties: IZOD Impact Strength (Z) | no standard stated | not in the median: notch not stated |
| HDT | 53 °CPhysical Performance: Heat Distortion Temperature | specimen not stated, no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.23 g/cm3 (unit to be confirmed) g/cm³Physical Performance: Density | specimen not stated, no standard stated | |
| Melt mass-flow rate | 5.7 g/10 minPhysical Performance: Melt Flow Indexalso in eSUN, PLA-Lite | specimen not stated, no standard namedAs the sheet prints it: 190 °C, 2.16 kg | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 190-230 °C; Bed 45-60 °C; Chamber Not required (no enclosure needed)eSUN, eSUN PLA-Lite product pageRecommended Printing Parameters; product features
- Nozzle 190-230℃/374-446℉; Bed 45-60℃eSUN, PLA-Litep. 1: Bed Temperature(°C); p. 1: Extruder Temperature(°C)
Price
Not in the price sample.
Its 3 documents
What the maker says (21)
- Printing advice
Retains PLA's easy-printing nature—no enclosure needed, beginner-friendly.
eSUN, PLA-Litep. 1 - Benefits
It combines PLA's signature easy-printing and eco-friendly properties with excellent forming quality and cost-effectiveness - making it the ideal workhorse filament for daily 3D printing.
eSUN, PLA-Litep. 1 - Benefits
Curated mainstream colors to reduce waste and hesitation-pure, consistent, and stable for efficient, hassle-free printing.
eSUN, PLA-Litep. 1 - Benefits
Modified PLA for daily printing-cost-effective and reliable.
eSUN, PLA-Litep. 1 - Good for
Great for prototypes and batch production, keeping costs low.
eSUN, PLA-Litep. 1 - Printing advice
Retains PLA's easy-printing nature-no enclosure needed, beginner-friendly.
eSUN, PLA-Litep. 1 - Warping and shrinkage
Minimal tuning, warp-free, and clog-free.
eSUN, PLA-Litep. 1 - Surface finish
Prints come out with a smooth, even surface and fine detail-ready to use right off the print bed with no post-processing required.
eSUN, PLA-Litep. 1 - Benefits
Made from safe, plant-based materials.
eSUN, PLA-Litep. 1 - Odour and emissions
Odorless during printing and fully biodegradable, making it safe for home use and the environment.
eSUN, PLA-Litep. 1 - Surface finish
unique premium matte surface hiding layer lines
eSUN, PLA-Litep. 1 - Supports and removal
effortless support removal
eSUN, PLA-Litep. 1 - Benefits
high filament toughness
eSUN, PLA-Litep. 1 - Warping and shrinkage
low shrinkage, no warping or cracking
eSUN, PLA-Litep. 1 - Benefits
smooth extrusion without clogging
eSUN, PLA-Litep. 1 - Good for
ideal for large-scale models and rapid prototyping.
eSUN, PLA-Litep. 1 - Benefits
High Toughness & Impact Resistance
eSUN, PLA-Litep. 1 - Precision and tolerance
hight precision
eSUN, PLA-Litep. 1 - Benefits
Excellent Printability
eSUN, PLA-Litep. 1 - Benefits
Biodegradable & Recyclable
eSUN, PLA-Litep. 1 - Good for
Cultural & Creative Prototyping Educational Applications Toys & Models
eSUN, PLA-Litep. 1
BigRep PLXStrength XY, MPa48Strength Z, MPa—Modulus XY, GPa3.1Charpy notched, kJ/m²4HDT 0.45, °C58HDT 1.8, °C56Price, CAD/kg—Nozzle, °C190–220Bed, °C50–70Chamber, °CnoneDrying, °C, h504–6 h
BigRep PLXBigRep
Only 2.85 mm filament was found; the H2C takes 1.75 mm.
Sold as toughened or impact-modified: "can better withstand impacts without breaking" (BigRep, PLX - Next Gen PLA Filament - 80% Faster 3D Printing | BigRep, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| BigRep, FILAMENT PLX10 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3100 MPap. 1: Tensile Modulus (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 48 MPap. 1: Tensile Strength (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2800 MPap. 1: Flexural Modulus (ISO 178) | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 90 MPap. 1: Flexural Strength (ISO 178) | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 4 kJ/m²p. 1: Impact Strength, Notched (ISO 179) | ISO 179 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 58 °Cp. 1: HDT B - 0.45 MPa (ISO 75) | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 56 °Cp. 1: HDT A - 1.8 MPa (ISO 75) | ISO 75As the sheet prints it: 1.8 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 63 °Cp. 1: Glass Transition Temperature (Tg) (DSC) | DSCAs the sheet prints it: Tg DSC | in the median |
| Melting temperature | 170 °Cp. 1: Melting Temperature (Tm) (DSC) | DSCAs the sheet prints it: Tm DSC | |
| Density | 1.24 g/cm³p. 1: Density (ISO 1183) | ISO 1183 | |
| BigRep, PLX - Next Gen PLA Filament - 80% Faster 3D Printing | BigRep2 valuesUnless a row says otherwise: specimen not stated | |||
| Elongation at break orientation not stated | 20%p. 1: Elongation at break (prose) | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength orientation not stated | 4 kJ/m²p. 1: Impact Strength, Notched (ISO 179) | ISO 179 | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 50–70 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 50 °C for 4–6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 190 - 220 °C; Bed 50 - 70 °C; Drying 50 °C for 4 - 6 hoursBigRep, FILAMENT PLXp. 1: Recommended printing settings; p. 1: Bed Temperature
- Nozzle 190 - 220 °C; Bed 50 - 70 °C; Drying 50 °C for 4 - 6 hoursBigRep, PLX - Next Gen PLA Filament - 80% Faster 3D Printing | BigRepp. 1: Bed Temperature
Price
Not in the price sample.
Its 3 documents
What the maker says (6)
- Benefits
Specifically, it has been engineered by BigRep to deliver superior strength, performance, and printing speed compared to PLA.
BigRep, PLX - Next Gen PLA Filament - 80% Faster 3D Printing | BigRepp. 1 - Benefits
It is slightly more heat resistant than PLA with a higher HDT B (58°C vs 54 °C).
BigRep, PLX - Next Gen PLA Filament - 80% Faster 3D Printing | BigRepp. 1 - Moisture sensitivity
PLX is a slightly hygroscopic material which means it absorbs moisture from the air which affects the print quality.
BigRep, PLX - Next Gen PLA Filament - 80% Faster 3D Printing | BigRepp. 1 - Moisture sensitivity
Yes, drying PLX filament is important if it has been exposed to moisture.
BigRep, PLX - Next Gen PLA Filament - 80% Faster 3D Printing | BigRepp. 1 - Moisture sensitivity
PLX can absorb water from the air resulting in bubbling or stringing while printing with it.
BigRep, PLX - Next Gen PLA Filament - 80% Faster 3D Printing | BigRepp. 1 - Benefits
can better withstand impacts without breaking
BigRep, PLX - Next Gen PLA Filament - 80% Faster 3D Printing | BigRepp. 1
Chemicals and environment (1)
- UV and outdoor: described in words
PLX is not resistant to chemicals, including solvents like acetone, as well as acids and alcohols, and can degrade from UV exposure.
UVBigRep, PLX - Next Gen PLA Filament - 80% Faster 3D Printing | BigRepp. 1
Anycubic PLA High SpeedStrength XY, MPa45Strength Z, MPa22.1Modulus XY, GPa2.75Charpy notched, kJ/m²—HDT 0.45, °C52HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–260Bed, °C55–65Chamber, °CnoneDrying, °C, h45–506–8 h
Anycubic PLA High SpeedAnycubic
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Anycubic, Anycubic PLA High Speed15 values | |||
| Tensile modulus XY | 2750±260 MPap. 1: Young's Modulus / MPa (X-Y) | ISO 527 | in the median |
| Tensile strength (yield or break not stated) XY | 45±5 MPap. 1: Tensile Strength / MPa (X-Y) | ISO 527 | in the median |
| Tensile strength (yield or break not stated) Z | 22.1±0.6 MPap. 1: Tensile Strength / MPa (Z) | ISO 527 | in the median |
| Elongation at break XY | 9±1 %p. 1: Elongation at Break / % (X-Y) | ISO 527 | in the median |
| Flexural modulus XY | 3905±300 MPap. 1: Bending Modulus / MPa (X-Y) | ISO 178 | in the median |
| Flexural strength XY | 82±8 MPap. 1: Bending Strength / MPa (X-Y) | ISO 178 | in the median |
| Izod impact strength XY | 21±1 kJ/m²p. 1: Izod Impact Strength (kJ/m²) (X-Y) | ISO 179 | not in the median: notch not stated |
| HDT at 0.45 MPa | 52 ℃p. 2: Heat Deflection Temperature (HDT) ISO 75-2, 0.45MPa ℃ | ISO 75As the sheet prints it: 0.45MPa ISO 75-2 | in the median |
| Glass transition temperature | 55.1 ℃p. 2: Glass Transition Temperature ISO 11357-1, 10℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-1 | in the median |
| Vicat softening temperature | 54.1 ℃p. 2: Vicat Softening Temperature (VST) ISO 306, 10N ℃ | ISO 306As the sheet prints it: VST 10N ISO 306 | |
| Melting temperature | 157 ℃p. 2: Melting Temperature ISO 11357-1, 10℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-1 | |
| Crystallization temperature | 109 ℃p. 2: Crystallization Temperature ISO 11357-1, 10℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-1 | |
| Density | 1.19 g/cm³p. 1: Density/(g/cm³) ISO 1183,at 23°C g/cm³ | ISO 1183As the sheet prints it: at 23°C ISO 1183 | |
| Moisture content | 0.26 %p. 1: Moisture Content ISO 787-2 % | ISO 787As the sheet prints it: ISO 787-2 | |
| Melt mass-flow rate | 13.2 ± 0.21 g/10minp. 1: Melt Index/ ( g/10min) ISO 1133 g/10min | ISO 1133As the sheet prints it: g/10min ISO 1133 | |
Print settings
- Nozzle
- 190–260 °Cown data sheet
- Bed
- 55–65 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 45–50 °C for 6–8 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-260; Bed 55-65; Drying 45-50℃,6-8hAnycubic, Anycubic PLA High Speedp. 1: Recommended printing settings; p. 2: Dry Environment; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Recommended Printing Parameters
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Benefits
It cools rapidly during printing, allowing for a consistent speed of 450mm/s.
Anycubic, Anycubic PLA High Speedp. 1
Anycubic PLA+Strength XY, MPa45Strength Z, MPa23.8Modulus XY, GPa2.79Charpy notched, kJ/m²—HDT 0.45, °C50HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C55–65Chamber, °CnoneDrying, °C, h45–506–8 h
Anycubic PLA+Anycubic
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Anycubic, Anycubic PLA+15 values | |||
| Tensile modulus XY | 2790±250 MPap. 1: Young's Modulus / MPa (X-Y) | ISO 527 | in the median |
| Tensile strength (yield or break not stated) XY | 45±5 MPap. 1: Tensile Strength / MPa (X-Y) | ISO 527 | in the median |
| Tensile strength (yield or break not stated) Z | 23.8±0.4 MPap. 1: Tensile Strength / MPa (Z) | ISO 527 | in the median |
| Elongation at break XY | 12±1 %p. 1: Elongation at Break / % (X-Y) | ISO 527 | in the median |
| Flexural modulus XY | 3980±360 MPap. 1: Bending Modulus / MPa (X-Y) | ISO 178 | in the median |
| Flexural strength XY | 82±8 MPap. 1: Bending Strength / MPa (X-Y) | ISO 178 | in the median |
| Izod impact strength XY | 28±1 kJ/m²p. 1: Izod Impact Strength (kJ/m²) (X-Y) | ISO 179 | not in the median: notch not stated |
| HDT at 0.45 MPa | 50 ℃p. 2: Heat Deflection Temperature (HDT) ISO 75-2, 0.45MPa ℃ | ISO 75As the sheet prints it: 0.45MPa ISO 75-2 | in the median |
| Glass transition temperature | 54.2 ℃p. 2: Glass Transition Temperature ISO 11357-1, 10℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-1 | in the median |
| Vicat softening temperature | 52 ℃p. 2: Vicat Softening Temperature (VST) ISO 306, 10N ℃ | ISO 306As the sheet prints it: VST 10N ISO 306 | |
| Melting temperature | 162 ℃p. 2: Melting Temperature ISO 11357-1, 10℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-1 | |
| Crystallization temperature | 108 ℃p. 2: Crystallization Temperature ISO 11357-1, 10℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-1 | |
| Density | 1.21 g/cm3p. 1: Density/(g/cm³) ISO 1183,at 23°C g/cm3 | ISO 1183As the sheet prints it: at 23°C ISO 1183 | |
| Moisture content | 0.23 %p. 1: Moisture Content ISO 787-2 % | ISO 787As the sheet prints it: ISO 787-2 | |
| Melt mass-flow rate | 6.2 ± 0.32 g/10minp. 1: Melt Index/ ( g/10min) ISO 1133 g/10min | ISO 1133As the sheet prints it: g/10min ISO 1133 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 55–65 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 45–50 °C for 6–8 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-230; Bed 55-65; Drying 45-50℃,6-8hAnycubic, Anycubic PLA+p. 2: Recommended printing settings; p. 2: Dry Environment; p. 2: Recommended Printing Parameters
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
It offers outstanding resistance to wear and deformation when printing moving components.
Anycubic, Anycubic PLA+p. 1 - Benefits
Anycubic PLA+ is an eco-friendly filament known for its high toughness, impressive impact resistance, and excellent elongation at break.
Anycubic, Anycubic PLA+p. 1: Product Name: Anycubic PLA+; introduction
colorFabb PLA EconomyStrength XY, MPa59.6Strength Z, MPa—Modulus XY, GPa3.48Charpy notched, kJ/m²2.8HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C50–60Chamber, °CnoneDrying, °C, h508 h
colorFabb PLA EconomycolorFabb
Sold as toughened or impact-modified: "ColorFabb PLA Economy is a high quality PLA 3D printing filament, impact modified to improve toughness." (colorFabb, Technical datasheet colorFabb PLA Economy, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| colorFabb, Technical datasheet PLA Economy13 values | |||
| Tensile modulus orientation not stated | 3480 MPap. 1: Youngs Modulus Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | in the median |
| Tensile strength (yield or break not stated) orientation not stated | 59.6 MPap. 1: Tensile Strength Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | in the median |
| Elongation at break orientation not stated | 3.7 %p. 1: Elongation at break Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | in the median |
| Flexural modulus orientation not stated | 3110 MPap. 1: Flexural Modulus Flexural, ISO 178 | ISO 178 | in the median |
| Flexural strength orientation not stated | 98.8 MPap. 1: Flexural Strength Flexural, ISO 178 | ISO 178 | in the median |
| Charpy impact strength | 2.8 kJ/m2p. 1: Impact Strength Charpy Notch, ISO 179 | ISO 179notched | not in the median: sold as toughened, set apart |
| Charpy impact strength | 5.0 kJ/m2p. 1: Charpy Impact Charpy Notch, ISO 179 | ISO 179notched | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 60 °Cp. 1: Heat Deflection Temp. HDT-B, ISO 75 | ISO 75As the sheet prints it: HDT B ISO 75 | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 55 °Cp. 1: Mechanical Properties - 3D Printed: Heat Deflection Temp. HDT-B, ISO 75 | ISO 75As the sheet prints it: HDT B ISO 75 | in the median |
| Melting temperature | 150-160 °Cp. 1: Melting Temp. DSC, ISO 11357 | ISO 11357 | |
| Density | 1,2 g/cm3p. 1: Density ISO 1183 | ISO 1183 | |
| Melt mass-flow rate | 6 g/10minp. 1: Melt Flow Index MFI, (210°C/2.16 kg) | ISO 1133As the sheet prints it: 210°C/2.16 kg ISO 1133-A | |
| Melt mass-flow rate | 3 g/10 minp. 1: Melt Flow Index MFI, (190°C/1,16 kg) | ISO 1133As the sheet prints it: 190°C/1 16 kg ISO 1133-A | |
| colorFabb, Technical datasheet colorFabb PLA Economy6 valuesThe same values also in colorFabb, Technical datasheet PLA Economy.Unless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3400 MPap. 1: Tensile Modulus MPa | ISO 527As the sheet prints it: ISO 527-1 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Tensile strength (yield or break not stated) orientation not stated | 45 MPap. 1: Tensile Strength MPa | ISO 527As the sheet prints it: ISO 527-1 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Elongation at break orientation not stated | 6 %p. 1: Tensile Elongation % | ISO 727As the sheet prints it: ISO 727-1 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Charpy impact strength | 7 kJ/m2p. 1: Impact Strength (Ch-N 23°C) kJ/m2 | ISO 179As the sheet prints it: Ch-N 23°C ISO 179-1 | not in the median: notch not stated |
| Glass transition temperature | 55-60 °Cp. 1: Glass Transition Temperature °Calso in colorFabb, Technical datasheet PLA Economy | no standard stated | in the median |
| Density | 1,2-1,3 g/cm3p. 1: Density g/cm3 | no standard stated | |
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 195-220 °C; Bed 50-60 °CcolorFabb, Technical datasheet PLA Economyp. 2: Recommended printing settings: Nozzle Temp; p. 2: Bed / surface modification
- Nozzle 195 - 220°C; Bed 50 - 60°CcolorFabb, Technical datasheet colorFabb PLA Economyp. 1: Recommended printing settings; p. 1: Bed surface / modification
Price
Not in the price sample.
Its 3 documents
What the maker says (2)
- Benefits
An impact modifier is added to improve toughness for this range of materials.
colorFabb, Technical datasheet PLA Economyp. 1 - Benefits
ColorFabb PLA Economy is a high quality PLA 3D printing filament, impact modified to improve toughness.
colorFabb, Technical datasheet colorFabb PLA Economyp. 1
Creality Hyper-PLA RFIDStrength XY, MPa43.4Strength Z, MPa27.9Modulus XY, GPa1.89Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C60Chamber, °C0–50Drying, °C, h508 h
Creality Hyper-PLA RFIDCreality
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Creality, Hyper-PLA RFID Filament Technical Data Sheet12 values | |||
| Tensile modulus XY | 1885.947 (Mpa)p. 2: Elasticity modulus (X-Y) | ASTM D638, ISO 527, GB/T 1040As the sheet prints it: ASTM D638 (ISO 527, GB/T 1040) | in the median |
| Tensile modulus Z | 1678.200 (Mpa)p. 2: Elasticity modulus (Z) | ASTM D638, ISO 527, GB/T 1040As the sheet prints it: ASTM D638 (ISO 527, GB/T 1040) | in the median |
| Tensile strength (yield or break not stated) XY | 43.357 MPap. 2: Tensile strength (X-Y) ASTM D638 (ISO 527, GB/T 1040) | ASTM D638, ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) Z | 27.949 Mpap. 2: Tensile strength (Z) ASTM D638 (ISO 527, GB/T 1040) | ASTM D638, ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 12.358 %p. 2: Elongation at break (X-Y) ASTM D638 (ISO 527, GB/T 1040) | ASTM D638, ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 2881.747 MPap. 2: Bending modulus (X-Y) ASTMD790 (ISO 178, GB/T 9341) | ASTM D790, ISO 178, GB/T 9341 | in the median |
| Flexural strength XY | 75.858 MPap. 2: Bending strength (X-Y) ASTMD790 (ISO 178, GB/T 9341) | ASTM D790, ISO 178, GB/T 9341 | in the median |
| Impact strength, test unclear XY | 17.586 kJ/m2p. 2: Charpy impact strength (X-Y) ASTM D256 (ISO 179, GB/T 1043) | ASTM D256, ISO 179, GB/T 1043notchedWhich test: probably Charpy | listed under other properties |
| Glass transition temperature | 62 °Cp. 1: Glass transition temperature DSC, 10°C/min | DSC | in the median |
| Vicat softening temperature | 62.3 ± 0.5 °Cp. 1: Vicat Softening temperature ASTM D1525 (ISO 306 GB/T 1633) | ASTM D1525, ISO 306, GB/T 1633 | |
| Density | 1.24 ± 0.1 g/cm3p. 1: Density ASTM D792 (ISO 1183, GB/T 1033) | ASTM D792, ISO 1183, GB/T 1033 | |
| Melt mass-flow rate | 3-5 g/10 minp. 1: Melt index 190°C, 2.16kg | no standard namedAs the sheet prints it: 190°C 2.16kg | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- 0–50 °Cown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-230°C; Bed 60°C; Chamber 0-50°CCreality, Hyper-PLA RFID Filament Technical Data Sheetp. 1: Recommended printing settings; p. 1: Hot Bed Temperature
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
This filament is suitable for both high-speed and low-speed printing, supporting printing speeds up to 600mm/s, and offers exceptional mechanical performance and tensile strength.
Creality, Hyper-PLA RFID Filament Technical Data Sheetp. 1 - Warping and shrinkage
Compared to standard ABS filament, Hyper PLA RFID has a low shrinkage rate, preventing edge warping during printing and ensuring successful print completion.
Creality, Hyper-PLA RFID Filament Technical Data Sheetp. 1
Polymaker Panchroma Satin PLAStrength XY, MPa31.1Strength Z, MPa16.7Modulus XY, GPa2.25Charpy notched, kJ/m²6.7HDT 0.45, °C58HDT 1.8, °C56Price, CAD/kg20Nozzle, °C190–220Bed, °C30–60Chamber, °C25–45Drying, °C, h556 h
Polymaker Panchroma Satin PLAPolymaker
Sold as toughened or impact-modified: "PolyTerra™ PLA+ filament contains organic material than ordinary PLA which brings better layer adhesion and extra toughness." (Polymaker, Technical Data Sheet PolyTerra™ PLA+, p. 2). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Polymaker, Technical Data Sheet PolyTerra™ PLA+13 values | |||
| Tensile modulus XY | 1951 ± 51 MPap. 5: Young’s modulus (X-Y) | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) XY | 27.0 ± 0.5 MPap. 5: Tensile strength (X-Y) | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) Z | 20.7 ± 1.0 MPap. 5: Tensile strength (Z) | ISO 527, GB/T 1040moistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: another value of this product is in it |
| Flexural strength XY | 49.5 ± 1.8 MPap. 5: Bending strength (X-Y) | ISO 178, GB/T 9341moistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | in the median |
| Charpy impact strength XY | 5.76 ± 0.85 kJ/m2p. 5: Charpy impact strength (X-Y) | ISO 179, GB/T 1043moistureAll specimens were conditioned at room temperature for 24h prior to testingprint settingsPrinting temperature 210 °C; Bed temperature 25 °C; Shell 2; Top & bottom layer 4; Infill 100%; Environmental temperature 25 °C; Cooling fan ON | not in the median: another value of this product is in it |
| HDT at 0.45 MPa | 58.4 °Cp. 4: Heat deflection temperature ISO 75 0.45MPa | ISO 75As the sheet prints it: 0.45MPa 75 ISO 75 | in the median |
| HDT at 1.8 MPa | 56.2 °Cp. 4: Heat deflection temperature ISO 75 1.8MPa | ISO 75As the sheet prints it: 1.8MPa 75 ISO 75 | in the median |
| Glass transition temperature | 59 °Cp. 4: Glass transition temperature DSC, 10°C/min | DSC | in the median |
| Vicat softening temperature | 62 °Cp. 4: Vicat softening temperature ISO 306, GB/T 1633 | ISO 306, GB/T 1633As the sheet prints it: 306 ISO 306 GB/T 1633 | |
| Melting temperature | 161 °Cp. 4: Melting temperature DSC, 10°C/min | DSC | |
| Density | 1.24 g/cm3p. 2: Density ISO1183, GB/T1033 | ISO 1183, GB/T 1033As the sheet prints it: 1183 ISO1183 GB/T1033 | |
| Water absorption | 0.41 %p. 3: Equilibrium water absorption (%)= | no standard stated | |
| Melt mass-flow rate | 8 g/10minp. 2: Melt index 210°C, 2.16kg | no standard namedAs the sheet prints it: 210°C 2.16kg | |
| Polymaker, Panchroma Product Data Sheet4 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 2246±91 MPap. 1: Young’s modulus (X-Y, MPa) | ISO 527 | in the median |
| Tensile strength (yield or break not stated) XY | 31.1±0.8 MPap. 1: Tensile strength (X-Y, MPa) | ISO 527 | in the median |
| Tensile strength (yield or break not stated) Z | 16.7±0.4 MPap. 1: Tensile strength (Z, MPa) | ISO 527 | in the median |
| Charpy impact strength orientation not stated | 6.7±0.5 kJ/m²p. 1: Notched Charpy impact strength (kJ/m²) | ISO 179 | not in the median: sold as toughened, set apart |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 30–60 °Cown data sheet
- Heated chamber
- 25–45 °Cown data sheet
- Drying
- 55 °C for 6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Polymaker, Panchroma Satin PLA 1.75mm 3D printer filament | Polymaker; heated chamber in Polymaker, Panchroma Satin PLA 1.75mm 3D printer filament | Polymaker.
Its 3 print profiles, in the documents' words
- Nozzle 190 – 220 (℃); Bed 30 - 60 (˚C); Chamber Room temperature – 45 (˚C)Polymaker, Technical Data Sheet PolyTerra™ PLA+p. 5: Recommended printing settings: Nozzle temperature
- Nozzle 190-230; Bed 25-60; Drying 55°C for 6hPolymaker, Panchroma Product Data Sheetp. 1: Printing temperature (°C); p. 1: Bed temperature (°C); p. 1: Recommended drying setting
- Nozzle 190˚C - 230˚C; Bed 25˚C - 60˚C; Drying 55˚C for 6hPolymaker, Panchroma Satin PLA 1.75mm 3D printer filament | Polymakerp. 1: Printing Temperature; p. 1: Bed Temperature; p. 1: Drying Settings; p. 1: Enclosure
Price
20.3 CAD/kgits one regular price in the sample
1 listing
- Amazon.ca: 20.3 CAD/kgPolymaker Panchroma Satin PLA Filament 1.75mm for 3D Printing, 1kg, Grey (SKU B0D7ZSYXSW)in its price; seen 19 Oct 2026
Its 4 documents
What the maker says (2)
- Adhesion between layers
PolyTerra™ PLA+ filament contains organic material than ordinary PLA which brings better layer adhesion and extra toughness.
Polymaker, Technical Data Sheet PolyTerra™ PLA+p. 2 - Supports and removal
Recommended support material Self-support
Polymaker, Technical Data Sheet PolyTerra™ PLA+p. 5
SUNLU PLA-METALLIC PLAStrength XY, MPa45Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²6IzodHDT 0.45, °C56HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C50–60Chamber, °CnoneDrying, °C, h50–60
SUNLU PLA-METALLIC PLASUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, 三绿物性表 ISO PLA-METALLIC PLA 金属12 values | |||
| Tensile strength (yield or break not stated) XY | 45 ± 5 MPap. 1: 拉伸强度(X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settings测试样条打印速度 100-200 mm/s，打印温度 270 ℃。填充 100%，走线方式为 90 度。 | in the median |
| Elongation at break XY | 11 ± 2 %p. 1: 断裂伸长率(X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settings测试样条打印速度 100-200 mm/s，打印温度 270 ℃。填充 100%，走线方式为 90 度。 | in the median |
| Flexural modulus XY | 2600 ± 500 MPap. 1: 弯曲模量(X-Y) Flexural Modulus ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settings测试样条打印速度 100-200 mm/s，打印温度 270 ℃。填充 100%，走线方式为 90 度。 | in the median |
| Flexural strength XY | 76 ± 5 MPap. 1: 弯曲强度(X-Y) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settings测试样条打印速度 100-200 mm/s，打印温度 270 ℃。填充 100%，走线方式为 90 度。 | in the median |
| Izod impact strength XY | 6 ± 2 KJ/m2p. 1: 悬 臂 梁 缺 口 冲 击 强 度 (X-Y) Izod Impact ISO 180 23℃ KJ/m2 Strength of Notched Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Strength of Specimen ISO 180print settings测试样条打印速度 100-200 mm/s，打印温度 270 ℃。填充 100%，走线方式为 90 度。 | in the median |
| Izod impact strength ZX | 5 ± 2 KJ/m2p. 1: 悬臂梁无缺口冲击强度(Z-X) Izod Impact ISO 180 23℃ KJ/m2 Strength of Unnotched Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Strength of Specimen ISO 180print settings测试样条打印速度 100-200 mm/s，打印温度 270 ℃。填充 100%，走线方式为 90 度。 | not in the median: unnotched |
| Hardness | 82 Shore Dp. 1: 邵氏硬度 Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | in the median |
| HDT XY, at 0.45 MPa | 56 ± 5 ℃p. 1: 热变形温度(X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | in the median |
| Glass transition temperature | 60 ℃p. 1: 玻璃化转变温度 Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-2 | in the median |
| Melting temperature | 165 ℃p. 1: 熔点温度 Melting Temperature ISO 11357-3 10 ℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Density | 1.21 ± 0.02 g/cm3p. 1: 密度 Density ISO 1183 23℃ g/cm3 | ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 5.1 g/10 minp. 1: 熔体指数 Melt Mass-flow Rate ISO 1133 220℃/10 kg g/10 min | ISO 1133As the sheet prints it: 220℃/10 kg ISO 1133 | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50–60 °Cown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 200-230; Bed 50-60℃; Chamber 常温; Drying 50-60℃SUNLU, 三绿物性表 ISO PLA-METALLIC PLA 金属p. 2: Drying Temp.; p. 2: 喷嘴温度 Nozzle Temp. ℃; p. 2: 平台温度 Plate Temp.; p. 2: 平台材料 Plate Material
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Supports and removal
Supported Material PVA
SUNLU, 三绿物性表 ISO PLA-METALLIC PLA 金属p. 2
SUNLU High Speed PLAStrength XY, MPa39Strength Z, MPa—Modulus XY, GPa3.28Charpy notched, kJ/m²4.5IzodHDT 0.45, °C57HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU High Speed PLASUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, Product Information High Speed PLA13 valuesThe same values also in SUNLU, TECHNICAL DATA SHEET ISO High Speed PLA. | |||
| Tensile modulus orientation not stated | 3282 MPap. 1: Young’s Modulus ASTM D638 1mm/min MPa | ASTM D638As the sheet prints it: 1mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 54.1 MPap. 1: Tensile Strength ASTM D638 50mm/min MPa | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 13.9 %p. 1: Elongation at break ASTM D638 50mm/min % | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: another value of this product is in it |
| Flexural modulus orientation not stated | 2357 MPap. 1: Flexural Modulus ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: another value of this product is in it |
| Flexural strength orientation not stated | 75.2 MPap. 1: Flexural Strength ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: another value of this product is in it |
| Izod impact strength | 5.9 KJ/m²p. 1: IZOD Impact Notched ISO180 4mm, 23℃ KJ/m² | ISO 180As the sheet prints it: 4mm 23℃ ISO180 | not in the median: another value of this product is in it |
| HDT at 0.45 MPa | 57.3 ℃p. 1: Heat Deflection (HDT) ASTM D648 0.45MPa ℃ | ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: another value of this product is in it |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temp. ASTM D1525 5kg,50℃/h ℃also in SUNLU, TECHNICAL DATA SHEET ISO High Speed PLA | ASTM D1525As the sheet prints it: 5kg ASTM D1525 | |
| Melting temperature | 165.3 ℃p. 1: Melting Point ASTM D7426 10℃/min ℃also in SUNLU, TECHNICAL DATA SHEET ISO High Speed PLA | ASTM D7426 | |
| Decomposition temperature | 375 ℃p. 1: @5%Decomposition Temp. ASTM E2402 20℃/min ℃ | ASTM E2402As the sheet prints it: E2402 | |
| Density | 1.26 g/cm3p. 1: Density ASTM D792 23℃ g/cm3 | ASTM D792As the sheet prints it: 23℃ ASTM D792 | |
| Melt mass-flow rate | 5.5 g/10minp. 1: Melt Flow Rate ASTM D1238 190℃/2.16kg g/10min | ASTM D1238As the sheet prints it: 190℃/2.16kg ASTM D1238 | |
| Mould shrinkage orientation not stated | 0.1-0.3 %p. 1: Mold Shrinkage ASTM D955 23℃ % | ASTM D955As the sheet prints it: 23℃ ASTM D955 | |
| SUNLU, TECHNICAL DATA SHEET ISO High Speed PLA+12 valuesUnless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 38 ± 5 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 100-220 mm/s; Printing temperature 220°C; Infill: 100%; 90° raster orientation | not in the median: another value of this product is in it |
| Elongation at break XY | 10 ± 3 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 100-220 mm/s; Printing temperature 220°C; Infill: 100%; 90° raster orientation | not in the median: another value of this product is in it |
| Flexural modulus XY | 3300 ± 200 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 100-220 mm/s; Printing temperature 220°C; Infill: 100%; 90° raster orientation | not in the median: another value of this product is in it |
| Flexural strength XY | 72 ± 5 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 100-220 mm/s; Printing temperature 220°C; Infill: 100%; 90° raster orientation | not in the median: another value of this product is in it |
| Izod impact strength XY | 6 ± 2 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 100-220 mm/s; Printing temperature 220°C; Infill: 100%; 90° raster orientation | not in the median: another value of this product is in it |
| Izod impact strength ZX | 6 ± 2 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 100-220 mm/s; Printing temperature 220°C; Infill: 100%; 90° raster orientation | not in the median: unnotched |
| Hardness | 82 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | listed under other properties |
| HDT XY, at 0.45 MPa | 56 ± 3 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: another value of this product is in it |
| Glass transition temperature | 64.2 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-2 | not in the median: another value of this product is in it |
| Melting temperature | 167 ℃p. 1: Melting Temperature ISO 11357-3 10 ℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Density | 1.27 g/cm3p. 1: Density ISO 1183 23℃ g/cm3 | specimen not stated, ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 7.3 ± 2 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 190℃/2.16 kg g/10 min | ISO 1133As the sheet prints it: 190℃/2.16 kg ISO 1133 | |
| SUNLU, TECHNICAL DATA SHEET ISO High Speed PLA11 valuesThe same values also in SUNLU, Product Information High Speed PLA.Unless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 39 ± 5 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Elongation at break XY | 12 ± 4 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural modulus XY | 3200 ± 400 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural strength XY | 70 ± 5 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength XY | 4.5 ± 2 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength ZX | 6 ± 3 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | not in the median: unnotched |
| Hardness | 81.4 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | listed under other properties |
| HDT XY, at 0.45 MPa | 57 ± 4 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | in the median |
| Glass transition temperature | 67.2 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃also in SUNLU, Product Information High Speed PLA | ISO 11357As the sheet prints it: ISO 11357-2 | in the median |
| Density | 1.28 g/cm3p. 1: Density ISO 1183 23℃ g/cm3 | specimen not stated, ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 7 ± 2.5 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 190℃/2.16 kg g/10 min | ISO 1133As the sheet prints it: 190℃/2.16 kg ISO 1133 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 6 print profiles, in the documents' words
- Nozzle 210-230; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO High Speed PLAp. 2: Recommended printing settings; p. 2: Nozzle Temp.
- Nozzle 210-230; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO High Speed PLA+p. 2: Recommended printing settings; p. 2: Nozzle Temp.
- Nozzle 205-215℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information High Speed PLAp. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Room Temp.
- Nozzle 190-210℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information High Speed PLAp. 2: Recommended Printing Parameters: Zonal Temperature, 50- 150mm/s
- Nozzle 200-230℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information High Speed PLAp. 2: Recommended Printing Parameters: Zonal Temperature, 150-300mm/s
- Nozzle 230-260℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information High Speed PLAp. 2: Recommended Printing Parameters: Zonal Temperature, 300-600mm/s
Price
Not in the price sample.
Its 4 documents
What the maker says (3)
- Benefits
Fast-printing PLA
SUNLU, TECHNICAL DATA SHEET ISO High Speed PLA+p. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO High Speed PLA+p. 2 - Good for
Decorative items, toys, accessories, and figurines
SUNLU, TECHNICAL DATA SHEET ISO High Speed PLAp. 1
SUNLU PLAStrength XY, MPa40Strength Z, MPa—Modulus XY, GPa3.5Charpy notched, kJ/m²5IzodHDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–240Bed, °C60–70Chamber, °CnoneDrying, °C, h50
SUNLU PLASUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, Product Information PLA13 valuesThe same values also in SUNLU, TECHNICAL DATA SHEET ISO PLA. | |||
| Tensile modulus orientation not stated | 3500 MPap. 1: Young’s Modulus ASTM D638 1mm/min MPa | ASTM D638As the sheet prints it: 1mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 61 MPap. 1: Tensile Strength ASTM D638 50mm/min MPa | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 3.1 %p. 1: Elongation at break ASTM D638 50mm/min % | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: another value of this product is in it |
| Flexural modulus orientation not stated | 2240 MPap. 1: Flexural Modulus ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: another value of this product is in it |
| Flexural strength orientation not stated | 83 MPap. 1: Flexural Strength ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: another value of this product is in it |
| Izod impact strength | 31 J/mp. 1: IZOD Impact Notched ASTM D256 3.2mm, 23℃ J/m | ASTM D256As the sheet prints it: 3.2mm 23℃ ASTM D256 | not in the median: in J/m |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat Deflection (HDT) ASTM D648 0.45MPa ℃ | ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: another value of this product is in it |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temp. ASTM D1525 5kg,50℃/h ℃also in SUNLU, TECHNICAL DATA SHEET ISO PLA | ASTM D1525As the sheet prints it: 5kg ASTM D1525 | |
| Melting temperature | 164 ℃p. 1: Melting Point ASTM D7426 10℃/min ℃also in SUNLU, TECHNICAL DATA SHEET ISO PLA | ASTM D7426 | |
| Decomposition temperature | 374 ℃p. 1: @5%Decomposition Temp. ASTM E2402 20℃/min ℃ | ASTM E2402As the sheet prints it: E2402 | |
| Density | 1.23 g/cm3p. 1: Density ASTM D792 23℃ g/cm3also in SUNLU, TECHNICAL DATA SHEET ISO PLA | ASTM D792As the sheet prints it: 23℃ ASTM D792 | |
| Melt mass-flow rate | 6.9 g/10minp. 1: Melt Flow Rate ASTM D1238 190℃/2.16kg g/10min | ASTM D1238As the sheet prints it: 190℃/2.16kg ASTM D1238 | |
| Mould shrinkage orientation not stated | 0.1-0.3 %p. 1: Mold Shrinkage ASTM D955 23℃ % | ASTM D955As the sheet prints it: 23℃ ASTM D955 | |
| SUNLU, TECHNICAL DATA SHEET ISO PLA10 valuesThe same values also in SUNLU, Product Information PLA.Unless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 40 ± 6 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 160-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Elongation at break XY | 10 ± 5 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 160-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural modulus XY | 2300 ± 300 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 160-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural strength XY | 65 ± 6 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 160-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength XY | 5 ± 3 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 160-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength ZX | 4.5 ± 1.5 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 160-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | not in the median: unnotched |
| Hardness | 80 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | listed under other properties |
| HDT XY, at 0.45 MPa | 55 ± 5 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | in the median |
| Glass transition temperature | 63 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃also in SUNLU, Product Information PLA | ISO 11357As the sheet prints it: ISO 11357-2 | in the median |
| Melt mass-flow rate | 6.9 ± 3 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 190℃/2.16 kg g/10 min | ISO 1133As the sheet prints it: 190℃/2.16 kg ISO 1133 | |
Print settings
- Nozzle
- 200–240 °Cown data sheet
- Bed
- 60–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 3 print profiles, in the documents' words
- Nozzle 200-210; 210-240; Bed 60-70℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO PLAp. 2: Recommended printing settings; p. 2: Nozzle Temp.
- Nozzle 200-210℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information PLAp. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Room Temp.
- Nozzle 210-240℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information PLAp. 2: Recommended Printing Parameters: Zonal Temperature, 100-200mm/s
Price
Not in the price sample.
Its 3 documents
What the maker says (3)
- Benefits
High compatibility, environmentally friendly, non-toxic, and fully biodegradable.
SUNLU, TECHNICAL DATA SHEET ISO PLAp. 1 - Benefits
High compatibility, environmentally friendly, non-toxic and full biodegradable.
SUNLU, Product Information PLAp. 1 - Supports and removal
Support Material PVA
SUNLU, Product Information PLAp. 2
BigRep rPLAStrength XY, MPa53Strength Z, MPa—Modulus XY, GPa3.4Charpy notched, kJ/m²2HDT 0.45, °C54HDT 1.8, °C52Price, CAD/kg—Nozzle, °C200–230Bed, °C50–70Chamber, °CnoneDrying, °C, h504–6 h
BigRep rPLABigRep
Only 2.85 mm filament was found; the H2C takes 1.75 mm.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| BigRep, FILAMENT rPLA9 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3400 MPap. 1: Tensile Modulus (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 53 MPap. 1: Tensile Strength (ISO 527) | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 3800 MPap. 1: Flexural Modulus (ISO 178) | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 61 MPap. 1: Flexural Strength (ISO 178) | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 2 kJ/m2p. 1: Impact Strength, Notched (ISO 179) | ISO 179 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 54 °Cp. 1: HDT B - 0.45 MPa (ISO 75) | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 52 °Cp. 1: HDTA - 1.8 MPa (ISO 75) | ISO 75As the sheet prints it: 1.8 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 55 °Cp. 1: Glass Transition Temperature (Tg) (DSC) | DSCAs the sheet prints it: Tg DSC | in the median |
| Density | 1.24 g/cm3p. 1: Density (ISO 1183) | ISO 1183 | |
| BigRep, rPLA1 value | |||
| Charpy impact strength orientation not stated | 2 kJ/m²p. 1: Impact Strength, Notched (ISO 179) | ISO 179 | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 50–70 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 50 °C for 4–6 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 200 - 230 °C; Bed 50-70°C; Drying 50°C for4 - 6 hoursBigRep, FILAMENT rPLAp. 1: Drying Recommendations, Nozzle Temperature; p. 1: Bed Temperature
- Nozzle 200 - 230 °C; Bed 50 - 70 °C; Drying 50 °C for 4 - 6 hoursBigRep, rPLAp. 1: Nozzle Temperature; p. 1: Print Bed Temperature; p. 1: Drying recommendations
Price
Not in the price sample.
Its 3 documents
What the maker says (16)
- Pitfalls and limitations
rPLA is not particularly heat resistant.
BigRep, rPLAp. 1 - Benefits
As a more sustainable option, BigRep rPLA is a biopolymer made from recycled PLA.
BigRep, rPLAp. 1 - Good for
It is also cost effective and great for prototyping.
BigRep, rPLAp. 1 - Benefits
Easy to Print
BigRep, rPLAp. 1 - Warping and shrinkage
rPLA is affordable, easy-to-use, and with low shrinkage making it great for prototyping, plus it prints well at lower temperatures and high speeds.
BigRep, rPLAp. 1 - Pitfalls and limitations
As with standard PLA, rPLA is not generally considered to have strong resistance to chemicals or UV exposure.
BigRep, rPLAp. 1 - Good for
With spool sizes up to 8 kg, BigRep filaments are optimized for large-scale 3D prints with complex geometries.
BigRep, rPLAp. 1 - Moisture sensitivity
50 °C for 4 - 6 hours
BigRep, rPLAp. 1 - Printing advice
Yes, the BigRep rPLA is compatible with all open material system 3D printers with a heated print bed and adequate temperature extrusion capabilities (200-230°C).
BigRep, rPLAp. 1 - Odour and emissions
Yes, it is, as long as the room has good ventilation or an air filtration system for the safety and comfort of the people using the 3D printer.
BigRep, rPLAp. 1 - Moisture sensitivity
rPLA is a slightly hygroscopic material which means it absorbs moisture from the air which affects the print quality.
BigRep, rPLAp. 1 - Moisture sensitivity
We recommend filament storage with a dryer such as the DRYCON which keeps the filament in perfect condition.
BigRep, rPLAp. 1 - Moisture sensitivity
Yes, drying rPLA filament is important if it has been exposed to moisture.
BigRep, rPLAp. 1 - Moisture sensitivity
rPLA can absorb water from the air resulting in bubbling or stringing while printing with it.
BigRep, rPLAp. 1 - Moisture sensitivity
We recommend using the BigRep DRYCON for 4-6 hours at 50°C, or use any industrial filament dryer or store it in a dry, airtight container with desiccants.
BigRep, rPLAp. 1 - Moisture sensitivity
rPLA filament has a long shelf life of 24 months if stored properly in a cool, dry place with minimal exposure to moisture or UV light.
BigRep, rPLAp. 1
SUNLU PLA+Strength XY, MPa53.4Strength Z, MPa—Modulus XY, GPa3.17Charpy notched, kJ/m²19.8IzodHDT 0.45, °C54HDT 1.8, °C—Price, CAD/kg—Nozzle, °C205–215Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU PLA+SUNLU
Sold as toughened or impact-modified: "PLA with high toughness." (SUNLU, Product Information PLA+, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, Product Information PLA+14 values | |||
| Tensile modulus orientation not stated | 3170 MPap. 1: Young’s Modulus ASTM D638 1mm/min MPa | ASTM D638As the sheet prints it: 1mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 53.4 MPap. 1: Tensile Strength ASTM D638 50mm/min MPa | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 20.3 %p. 1: Elongation at break ASTM D638 50mm/min % | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2740 MPap. 1: Flexural Modulus ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 81.8 MPap. 1: Flexural Strength ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 19.8 KJ/m²p. 1: IZOD Impact Notched ISO180 4mm, 23℃ KJ/m² | ISO 180As the sheet prints it: 4mm 23℃ ISO180 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 53.8 ℃p. 1: Heat Deflection (HDT) ASTM D648 0.45MPa ℃ | ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 61 ℃p. 1: Glass Transition(Tg) ASTM D7426 10℃/min ℃ | ASTM D7426 | in the median |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temp. ASTM D1525 5kg,50℃/h ℃ | ASTM D1525As the sheet prints it: 5kg ASTM D1525 | |
| Melting temperature | 164 ℃p. 1: Melting Point ASTM D7426 10℃/min ℃ | ASTM D7426 | |
| Decomposition temperature | 375 ℃p. 1: @5%Decomposition Temp. ASTM E2402 20℃/min ℃ | ASTM E2402As the sheet prints it: E2402 | |
| Density | 1.21 g/cm3p. 1: Density ASTM D792 23℃ g/cm3 | ASTM D792As the sheet prints it: 23℃ ASTM D792 | |
| Melt mass-flow rate | 7.8 g/10minp. 1: Melt Flow Rate ASTM D1238 190℃/2.16kg g/10min | ASTM D1238As the sheet prints it: 190℃/2.16kg ASTM D1238 | |
| Mould shrinkage orientation not stated | 0.1-0.3 %p. 1: Mold Shrinkage ASTM D955 23℃ % | ASTM D955As the sheet prints it: 23℃ ASTM D955 | |
Print settings
- Nozzle
- 205–215 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 3 print profiles, in the documents' words
- Nozzle 205-215℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information PLA+p. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Room Temp.
- Nozzle 195-205℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information PLA+p. 2: Recommended Printing Parameters: Zonal Temperature, 50- 100mm/s
- Nozzle 205-220℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information PLA+p. 2: Recommended Printing Parameters: Zonal Temperature, 100-300mm/s
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Benefits
PLA with high toughness.
SUNLU, Product Information PLA+p. 1
Elegoo PLAStrength XY, MPa40.5Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²3.5IzodHDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C25–40Chamber, °CnoneDrying, °C, h508 h
Elegoo PLAElegoo
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Elegoo14 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 40.5 MPap. 1: Tensile strength (Printing) | ISO 527As the sheet prints it: ISO 527; rate=50 mm/min | in the median |
| Tensile strength (yield or break not stated) | 55.3 MPap. 1: Tensile strength (Injection Moulding) | ISO 527As the sheet prints it: ISO 527; rate=50 mm/min | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 3.2 %p. 1: Elongation at break (Printing) | ISO 527As the sheet prints it: ISO 527; rate=50 mm/min | in the median |
| Elongation at break | 25.5 %p. 1: Elongation at break (Injection Moulding) | ISO 527As the sheet prints it: ISO 527; rate=50 mm/min | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 2650 MPap. 1: Bending modulus (Printing) | ISO 178As the sheet prints it: ISO 178; rate=2 m/min | in the median |
| Flexural modulus | 2865 MPap. 1: Bending modulus (Injection Moulding) | ISO 178As the sheet prints it: ISO 178; rate=2 m/min | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 72.5 MPap. 1: Bending Strength (Printing) | ISO 178As the sheet prints it: ISO 178; rate=2 m/min | in the median |
| Flexural strength | 85.5 MPap. 1: Bending Strength (Injection Moulding) | ISO 178As the sheet prints it: ISO 178; rate=2 m/min | not in the median: measured on a moulded bar |
| Izod impact strength orientation not stated | 3.5 KJ/m²p. 1: Izod Impact, Notched (3.5) | ISO 180tested at 23 °C | in the median |
| Izod impact strength | 5.6 KJ/m²p. 1: Izod Impact, Notched (5.6) | ISO 180tested at 23 °C | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat distortion temperature ISO 75 0.45MPa ℃ | ISO 75As the sheet prints it: 0.45MPa ISO 75 | in the median |
| Glass transition temperature | 60 ℃p. 1: Glass transition Temperature ISO 11357 10℃/min ℃ | ISO 11357 | in the median |
| Density | 1.25 g/cm3p. 1: Density ISO 1183 23℃ g/cm3 | ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 7.0 g/10minp. 1: Melt Index ISO 1133 190℃,2.16kg g/10min | ISO 1133As the sheet prints it: 190℃ 2.16kg ISO 1133 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 25–40 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-230℃; Bed Room temprature-40℃Elegoop. 2: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
SUNLU High Speed Matte PLAStrength XY, MPa27Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²8IzodHDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–260Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU High Speed Matte PLASUNLU
Data sheet shared with SUNLU PLA Lite: their values are one table, recorded once.
Modified: cosmetic dense filler. Its values are kept out of the material's medians.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 200–260 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 200-260; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO High Speed Matte PLAp. 2: Nozzle Temp., Plate Temp.; p. 2: Plate Material
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
Fast printing
SUNLU, TECHNICAL DATA SHEET ISO High Speed Matte PLAp. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO High Speed Matte PLAp. 2
SUNLU High Speed PLA+2.0Strength XY, MPa40Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²4.5IzodHDT 0.45, °C57HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–260Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU High Speed PLA+2.0SUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, TECHNICAL DATA SHEET ISO High Speed PLA+2.012 valuesUnless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 40 ± 3 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 100-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Elongation at break XY | 14 ± 4 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 100-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural modulus XY | 3290 ± 300 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 100-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural strength XY | 73 ± 5 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 100-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength XY | 4.5 ± 1.5 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 100-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength ZX | 5 ± 1.5 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 100-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | not in the median: unnotched |
| Hardness | 86.5 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | listed under other properties |
| HDT XY, at 0.45 MPa | 56.5 ± 3 ℃p. 1: X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | in the median |
| Glass transition temperature | 67.5 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-2 | in the median |
| Melting temperature | 168.3 ℃p. 1: Melting Temperature ISO 11357-3 10 ℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Density | 1.27 g/cm3p. 1: Density ISO 1183 23℃ g/cm3 | specimen not stated, ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 10.2 ± 3 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 190℃/2.16 kg g/10 min | ISO 1133As the sheet prints it: 190℃/2.16 kg ISO 1133 | |
Print settings
- Nozzle
- 200–260 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 200-215; 215-230; 230-260; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO High Speed PLA+2.0p. 2: Recommended printing settings; p. 2: Nozzle Temp.
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
Significantly improves printing efficiency and offers high equipment compatibility.
SUNLU, TECHNICAL DATA SHEET ISO High Speed PLA+2.0p. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO High Speed PLA+2.0p. 2
SUNLU PLA ClassicStrength XY, MPa28Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²18.1IzodHDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–210Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU PLA ClassicSUNLU
Modified: cosmetic dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, PLA Classic11 values | |||
| Tensile strength (yield or break not stated) XY | 28.004 MPap. 1: Tensile Strength(X-Y) ISO527/2 50mm/min MPa | ISO 527As the sheet prints it: 50mm/min ISO527/2 | not in the median: added filler or additive |
| Elongation at break XY | 27.50 %p. 1: Elongation at break(X-Y) ISO527/2 50mm/min % | ISO 527As the sheet prints it: 50mm/min ISO527/2 | not in the median: added filler or additive |
| Flexural modulus XY | 3832.202 MPap. 1: Flexural Modulus(X-Y) ISO178 2mm/min MPa | ISO 178As the sheet prints it: 2mm/min ISO178 | not in the median: added filler or additive |
| Flexural strength XY | 85.809 MPap. 1: Flexural Strength(X-Y) ISO178 2mm/min MPa | ISO 178As the sheet prints it: 2mm/min ISO178 | not in the median: added filler or additive |
| Izod impact strength XY | 18.0952 KJ/m2p. 1: IZOD Impact Notched(X-Y) ISO180 23℃ KJ/m2 | ISO 180As the sheet prints it: 23℃ ISO180 | not in the median: added filler or additive |
| Izod impact strength ZX | 5.7311 KJ/m2p. 1: IZOD Impact Notched (Z-X) ISO180 23℃ KJ/m2 | ISO 180As the sheet prints it: Z-X 23℃ ISO180 | not in the median: measured on a bar in another orientation |
| HDT at 0.45 MPa | 55 ℃p. 1: Heat Deflection (HDT) ISO75 0.45MPa ℃ | ISO 75As the sheet prints it: 0.45MPa ISO75 | not in the median: added filler or additive |
| Glass transition temperature | 56 ℃p. 1: Glass Transition(Tg) ISO11357-3 10℃/min ℃ | ISO 11357As the sheet prints it: ISO11357-3 | not in the median: added filler or additive |
| Melting temperature | 158 ℃p. 1: Melting Point ISO11357-3 10℃/min ℃ | ISO 11357As the sheet prints it: ISO11357-3 | |
| Density | 1.365 g/cm3p. 1: Density ISO1183 23℃ g/cm3 | ISO 1183As the sheet prints it: 23℃ ISO1183 | |
| Melt mass-flow rate | 5.1599 g/10minp. 1: Melt Flow Rate ISO1133 190℃/2.16kg g/10min | ISO 1133As the sheet prints it: 190℃/2.16kg ISO1133 | |
Print settings
- Nozzle
- 190–210 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 3 print profiles, in the documents' words
- Nozzle 190-210; Bed 50-60℃; Chamber Room temperature; Drying 50℃SUNLU, PLA Classicp. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Print Platform Temp.; p. 2: Nozzle temperature, 50-150mm/s; p. 2: Print Platform Material
- Nozzle 210-230; Bed 50-60℃; Chamber Room temperature; Drying 50℃SUNLU, PLA Classicp. 2: Recommended Printing Parameters: Nozzle temperature, 150-300mm/s; p. 2: Print Platform Material
- Nozzle 230-260; Bed 50-60℃; Chamber Room temperature; Drying 50℃SUNLU, PLA Classicp. 2: Recommended Printing Parameters: Nozzle temperature, 300-450mm/s; p. 2: Print Platform Material
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Good for
Ornaments, toys, ornaments, handcrafts
SUNLU, PLA Classicp. 1 - Benefits
Supports printing speeds of up to 600mm/s,High toughness
SUNLU, PLA Classicp. 1 - Supports and removal
Support Material PVA
SUNLU, PLA Classicp. 2
SUNLU PLA LiteStrength XY, MPa27Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²8IzodHDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–260Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU PLA LiteSUNLU
Data sheet shared with SUNLU High Speed Matte PLA: their values are one table, recorded once.
Modified: cosmetic dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, TECHNICAL DATA SHEET ISO PLA Lite12 valuesUnless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 27 ± 4 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | not in the median: added filler or additive |
| Elongation at break XY | 20 ± 7 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | not in the median: added filler or additive |
| Flexural modulus XY | 3300 ± 400 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | not in the median: added filler or additive |
| Flexural strength XY | 50 ± 6 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | not in the median: added filler or additive |
| Izod impact strength XY | 8 ± 3 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | not in the median: added filler or additive |
| Izod impact strength ZX | 5 ± 2 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 160-220 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | not in the median: unnotched |
| Hardness | 80.5 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | listed under other properties |
| HDT XY, at 0.45 MPa | 55 ± 3 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: added filler or additive |
| Glass transition temperature | 56 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-2 | not in the median: added filler or additive |
| Melting temperature | 158 ℃p. 1: Melting Temperature ISO 11357-3 10 ℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Density | 1.36 g/cm3p. 1: Density ISO 1183 23℃ g/cm3 | specimen not stated, ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 6 ± 2 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 190℃/2.16 kg g/10 min | ISO 1133As the sheet prints it: 190℃/2.16 kg ISO 1133 | |
Print settings
- Nozzle
- 200–260 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 200-260; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO PLA Litep. 2: Recommended printing settings; p. 2: Nozzle Temp.
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
Fast printing
SUNLU, TECHNICAL DATA SHEET ISO PLA Litep. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO PLA Litep. 2
SUNLU PLA Matte Dual-ColorStrength XY, MPa39Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²5IzodHDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C205–245Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU PLA Matte Dual-ColorSUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, TECHNICAL DATA SHEET ISO PLA Matte Dual-Color15 valuesUnless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 39 ± 6 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 160-270 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Elongation at break XY | 15 ± 5 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 160-270 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural modulus XY | 3700 ± 400 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 160-270 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural strength XY | 72 ± 6 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 160-270 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength XY | 5 ± 2 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 160-270 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength ZX | 4.5 ± 2 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 160-270 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | not in the median: unnotched |
| Hardness | 83 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | listed under other properties |
| HDT XY, at 0.45 MPa | 55 ± 5 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | in the median |
| Glass transition temperature | 58.8 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-2 | in the median |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temp. ISO 306 5kg, 50℃/h ℃ | ISO 306As the sheet prints it: 5kg ISO 306 | |
| Melting temperature | 162.6 ℃p. 1: Melting Temperature ISO 11357-3 10 ℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Decomposition temperature | ≥374 ℃p. 1: @5%Decomposition Temp. | specimen not stated, ISO 11358As the sheet prints it: ISO 11358; rate=20 ℃/min | |
| Density | 1.31 g/cm3p. 1: Density ISO 1183 23℃ g/cm3 | specimen not stated, ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 5.5 ± 1.5 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 190℃/2.16 kg g/10 min | ISO 1133As the sheet prints it: 190℃/2.16 kg ISO 1133 | |
| Mould shrinkage orientation not stated | 0.1-0.3 %p. 1: Moulding Shrinkage | specimen not stated, ISO 294tested at 23℃ | |
Print settings
- Nozzle
- 205–245 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 205-215; 215-245; Bed 50-60℃; Chamber 常温; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO PLA Matte Dual-Colorp. 2: Recommended printing settings; p. 2: Nozzle Temp.; p. 2: Plate Material
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Surface finish
PLA with a matte, plastic-like finish, producing models with two colors on different surfaces after printing.
SUNLU, TECHNICAL DATA SHEET ISO PLA Matte Dual-Colorp. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO PLA Matte Dual-Colorp. 2
SUNLU PLA RainbowStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²6.5IzodHDT 0.45, °C57HDT 1.8, °C—Price, CAD/kg—Nozzle, °C185–225Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU PLA RainbowSUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, TECHNICAL DATA SHEET ISO PLA Rainbow15 valuesUnless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 50 ± 5 MPap. 1: (X-Y) Tensile Strength ISO 527/2 50 mm/min MPa | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Elongation at break XY | 10 ± 3 %p. 1: (X-Y) Elongation at break ISO 527/2 50 mm/min % | ISO 527As the sheet prints it: 50 mm/min ISO 527/2print settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural modulus XY | 2900 ± 300 MPap. 1: (X-Y) Flexural Modulus ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural strength XY | 85 ± 6 MPap. 1: (X-Y) Flexural Strength ISO 178 2 mm/min MPa | ISO 178As the sheet prints it: 2 mm/min ISO 178print settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength XY | 6.5 ± 2.5 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Izod impact strength ZX | 8 ± 3 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | not in the median: unnotched |
| Hardness | 83.5 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | listed under other properties |
| HDT XY, at 0.45 MPa | 57 ± 3 ℃p. 1: (X-Y) Heat Distortion (HDT) ISO 75 0.45 MPa ℃ | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | in the median |
| Glass transition temperature | 63 ℃p. 1: Glass Transition (Tg) ISO 11357-2 10 ℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-2 | in the median |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temp. ISO 306 5kg, 50℃/h ℃ | ISO 306As the sheet prints it: 5kg ISO 306 | |
| Melting temperature | 164 ℃p. 1: Melting Temperature ISO 11357-3 10 ℃/min ℃ | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Decomposition temperature | ≥374 ℃p. 1: @5%Decomposition Temp. | specimen not stated, ISO 11358As the sheet prints it: ISO 11358; rate=20 ℃/min | |
| Density | 1.21 g/cm3p. 1: Density ISO 1183 23℃ g/cm3 | specimen not stated, ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 5 ± 2 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 190℃/2.16 kg g/10 min | ISO 1133As the sheet prints it: 190℃/2.16 kg ISO 1133 | |
| Mould shrinkage orientation not stated | 0.1-0.3 %p. 1: Moulding Shrinkage | specimen not stated, ISO 294tested at 23℃ | |
Print settings
- Nozzle
- 185–225 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 185-195; 195-225; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO PLA Rainbowp. 2: Recommended printing settings; p. 2: Nozzle Temp.
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
High flowability, enabling fast printing at lower temperatures.
SUNLU, TECHNICAL DATA SHEET ISO PLA Rainbowp. 1 - Moisture sensitivity
Drying can help reduce stringing.
SUNLU, TECHNICAL DATA SHEET ISO PLA Rainbowp. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO PLA Rainbowp. 2
SUNLU PLA+2.0Strength XY, MPa46Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²10IzodHDT 0.45, °C56HDT 1.8, °C—Price, CAD/kg—Nozzle, °C205–245Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU PLA+2.0SUNLU
Sold as toughened or impact-modified: "High-toughness PLA" (SUNLU, TECHNICAL DATA SHEET ISO PLA+2.0, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, TECHNICAL DATA SHEET ISO PLA+2.08 valuesThe same values also in SUNLU, TECHNICAL DATA SHEET ISO PLA+.Unless a row says otherwise: printed specimen | |||
| Tensile strength (yield or break not stated) XY | 46±5 MPap. 1: (X-Y) Tensile Strengthalso in SUNLU, TECHNICAL DATA SHEET ISO PLA+ | ISO 527As the sheet prints it: ISO 527/2; rate=50 mm/minprint settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Elongation at break XY | 10±2.5 %p. 1: (X-Y) Elongation at breakalso in SUNLU, TECHNICAL DATA SHEET ISO PLA+ | ISO 527As the sheet prints it: ISO 527/2; rate=50 mm/minprint settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural modulus XY | 2750±200 MPap. 1: (X-Y) Flexural Modulusalso in SUNLU, TECHNICAL DATA SHEET ISO PLA+ | ISO 178As the sheet prints it: ISO 178; rate=2 mm/minprint settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| Flexural strength XY | 83±5 MPap. 1: (X-Y) Flexural Strengthalso in SUNLU, TECHNICAL DATA SHEET ISO PLA+ | ISO 178As the sheet prints it: ISO 178; rate=2 mm/minprint settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | in the median |
| HDT XY, at 0.45 MPa | 56±3 ℃p. 1: X-Y) Heat Distortion (HDT)also in SUNLU, TECHNICAL DATA SHEET ISO PLA+ | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | in the median |
| Glass transition temperature | 61 ℃p. 1: Glass Transition (Tg)also in SUNLU, TECHNICAL DATA SHEET ISO PLA+ | ISO 11357As the sheet prints it: ISO 11357-2; rate=10 ℃/min | in the median |
| Decomposition temperature | ≥375 ℃p. 1: @5%Decomposition Temp. | ISO 11358As the sheet prints it: ISO 11358; rate=20 ℃/min; loss=5% | |
| Mould shrinkage orientation not stated | 0.1-0.3 %p. 1: Moulding Shrinkage | ISO 294tested at 23℃ | |
| SUNLU, TECHNICAL DATA SHEET ISO PLA+7 valuesThe same values also in SUNLU, TECHNICAL DATA SHEET ISO PLA+2.0.Unless a row says otherwise: printed specimen | |||
| Izod impact strength XY | 10 ± 3 KJ/m2p. 1: (X-Y) Izod Impact Strength of Notched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | not in the median: sold as toughened, set apart |
| Izod impact strength ZX | 8 ± 3 KJ/m2p. 1: (Z-X) Izod Impact Strength of Unnotched ISO 180 23℃ KJ/m2 Specimen | ISO 180As the sheet prints it: 23℃ KJ/m2 Specimen ISO 180print settingsPrinting speed 100-260 mm/s; Printing temperature 220 °C; Infill: 100%; 90° raster orientation | not in the median: unnotched |
| Hardness | 81 Shore (scale not specified by source)p. 1: Shore Hardness ISO 868 23℃ HA/HD | ISO 868As the sheet prints it: 23℃ HA/HD ISO 868 | listed under other properties |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temp. ISO 306 5kg, 50℃/h ℃also in SUNLU, TECHNICAL DATA SHEET ISO PLA+2.0 | ISO 306As the sheet prints it: 5kg ISO 306 | |
| Melting temperature | 164 ℃p. 1: Melting Temperature ISO 11357-3 10 ℃/min ℃also in SUNLU, TECHNICAL DATA SHEET ISO PLA+2.0 | ISO 11357As the sheet prints it: ISO 11357-3 | |
| Density | 1.21 g/cm3p. 1: Density ISO 1183 23℃ g/cm3 | specimen not stated, ISO 1183As the sheet prints it: 23℃ ISO 1183 | |
| Melt mass-flow rate | 8.3 ± 2 g/10 minp. 1: Melt Mass-flow Rate ISO 1133 190℃/2.16 kg g/10 minalso in SUNLU, TECHNICAL DATA SHEET ISO PLA+2.0 | ISO 1133As the sheet prints it: 190℃/2.16 kg ISO 1133 | |
Print settings
- Nozzle
- 205–245 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 205-215; 215-245; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO PLA+p. 2: Recommended printing settings; p. 2: Nozzle Temp.
- Nozzle 205-215; 215-245; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, TECHNICAL DATA SHEET ISO PLA+2.0p. 2: Nozzle Temp., Plate Temp.; p. 2: Plate Material
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Benefits
High-toughness PLA
SUNLU, TECHNICAL DATA SHEET ISO PLA+2.0p. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO PLA+2.0p. 2 - Benefits
High-toughness PLA
SUNLU, TECHNICAL DATA SHEET ISO PLA+p. 1 - Supports and removal
Supported Material PVA
SUNLU, TECHNICAL DATA SHEET ISO PLA+p. 2
AzureFilm PLA Matte (HS)Strength XY, MPa42.8Strength Z, MPa21.7Modulus XY, GPa3.8Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C205–225Bed, °C60Chamber, °CnoneDrying, °C, h508 h
AzureFilm PLA Matte (HS)AzureFilm
Modified: cosmetic dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
AzureFilm, Technical Data Sheet 05.24 PLA Matte (HS)22 valuesUnless a row says otherwise: printed specimenprint settings100% infill; 2 shells; layer height of 0.2mm | |||
| Tensile modulus XY | 3800 MPap. 1: Tensile Modulus (XY Value) | ISO 527As the sheet prints it: ISO 527-2 | not in the median: added filler or additive |
| Tensile modulus Z (ZX) | 3200 MPap. 1: Tensile Modulus (ZX Value) | ISO 527As the sheet prints it: ISO 527-2 | not in the median: added filler or additive |
| Tensile modulus XZ | 3800 MPap. 1: Tensile Modulus (XZ Value) | ISO 527As the sheet prints it: ISO 527-2 | not in the median: measured on a bar in another orientation |
| Tensile strength (yield or break not stated) XY | 42.8 MPap. 1: Tensile Strength (XY Value) | ISO 527As the sheet prints it: ISO 527-2 | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) Z (ZX) | 21.7 MPap. 1: Tensile Strength (ZX Value) | ISO 527As the sheet prints it: ISO 527-2 | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) XZ | 44.2 MPap. 1: Tensile Strength (XZ Value) | ISO 527As the sheet prints it: ISO 527-2 | not in the median: measured on a bar in another orientation |
| Tensile yield strength XY | 32.9 MPap. 1: Yield Strength (XY Value) | ISO 527As the sheet prints it: ISO 527-2 | not in the median: another value of this product is in it |
| Tensile yield strength XZ | 32.8 MPap. 1: Yield Strength (XZ Value) | ISO 527As the sheet prints it: ISO 527-2 | not in the median: measured on a bar in another orientation |
| Elongation at yield XY | 4.1 %p. 1: Strain at Yield (XY Value) | ISO 527As the sheet prints it: ISO 527-2 | listed under other properties |
| Elongation at yield Z (ZX) | 0.8 %p. 1: Strain at Yield (ZX Value) | ISO 527As the sheet prints it: ISO 527-2 | listed under other properties |
| Elongation at yield XZ | 3.6 %p. 1: Strain at Yield (XZ Value) | ISO 527As the sheet prints it: ISO 527-2 | listed under other properties |
| Flexural modulus XY | 4500 MPap. 1: Flexural Modus (XY Value) | ISO 178 | not in the median: added filler or additive |
| Flexural modulus XZ | 4500 MPap. 1: Flexural Modus (XZ Value) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural modulus ZX | 4000 MPap. 1: Flexural Modus (ZX Value) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 81.8 MPap. 1: Flexural Strength (XY Value) | ISO 178 | not in the median: added filler or additive |
| Flexural strength XZ | 83 MPap. 1: Flexural Strength (XZ Value) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength ZX | 52.7 MPap. 1: Flexural Strength (ZX Value) | ISO 178 | not in the median: measured on a bar in another orientation |
| Charpy impact strength XY | 6 kJ/m²p. 1: Impact Strength (XY Value) | ISO 179 | not in the median: notch not stated |
| HDT | 55 °Cp. 1: Heat deflect. temp. | specimen not stated; its document points to a moulded or resin bar, ISO 75print settings not stated | not in the median: added filler or additive |
| Melting temperature | 164 °Cp. 1: Melting temp. ISO 294 | specimen not stated, ISO 294print settings not stated | |
| Density | 1.35 g/ccp. 1: Specific gravity ISO 1133 | specimen not stated, ISO 1133print settings not stated | |
| Melt volume-flow rate | 14 cm³/10 minp. 1: Melt flow rate | specimen not stated, ISO 1133print settings not stated | |
Print settings
- Nozzle
- 205–225 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 205-225 °C; Bed 60 °CAzureFilm, Technical Data Sheet 05.24 PLA Matte (HS)p. 1: Printing temp.; p. 1: Bed temp.
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
PLA Matte can be printed at extremely high speeds, is extremely tough
AzureFilm, Technical Data Sheet 05.24 PLA Matte (HS)p. 1 - Surface finish
the matte look hides layer lines resulting in OEM quality objects.
AzureFilm, Technical Data Sheet 05.24 PLA Matte (HS)p. 1
colorFabb Copper filled PLAStrength XY, MPa13.7Strength Z, MPa—Modulus XY, GPa2.5Charpy notched, kJ/m²2.97HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C50–60Chamber, °C—Drying, °C, h604 h
colorFabb Copper filled PLAcolorFabb
Modified: declared dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| colorFabb, Preliminary Data Sheet Copper filled PLA11 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 25 MPap. 1: Tensile strength (max.) ISO 527 MPa | ISO 527 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Elongation at break orientation not stated | 3-10 %p. 1: Elongation at break ISO 527 % | ISO 527 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Flexural modulus orientation not stated | 7,0 GPap. 1: Flexural modulus ISO 178 GPa | ISO 178 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Flexural strength orientation not stated | 40 MPap. 1: Flexural strength ISO 178 MPa | ISO 178 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Izod impact strength | 5,5 kJ/m2p. 1: IZOD impact strength, notched ISO 180/1eA kJ/m2 | ISO 180As the sheet prints it: ISO 180/1eA | not in the median: added filler or additive |
| Izod impact strength | 10 kJ/m2p. 1: IZOD impact strength, unnotched ISO 180/1eU kJ/m2 | ISO 180As the sheet prints it: ISO 180/1eU | not in the median: unnotched |
| Melting temperature | held back: the sheet's unit or table layout is unclearheld backp. 1: Melt temperature : | no standard stated | |
| Density | 4,0 g/cm3p. 1: Specific gravity ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 1,8 %p. 1: Water absorption at saturation, 23 °C ISO 62 % | ISO 62As the sheet prints it: 23 °C ISO 62 | |
| Water absorption | 0,3 %p. 1: Humidity absorption, 23 °C/50 % r.h. ISO 62 % | ISO 62As the sheet prints it: 23 °C/50 r.h. ISO 62 | |
| Mould shrinkage orientation not stated | 0,15-0,35 %p. 1: Mould shrinkage (flow direction, 3 mm) ISO 2577 % | ISO 2577As the sheet prints it: flow direction 3 mm ISO 2577 | |
| colorFabb, Technical datasheet colorFabb copperFill8 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus orientation not stated | 2500 MPap. 1: Youngs Modulus Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) orientation not stated | 13.7 MPap. 1: Tensile Strength Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | not in the median: added filler or additive |
| Elongation at break orientation not stated | 5.9 %p. 1: Elongation at break Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | not in the median: added filler or additive |
| Flexural modulus orientation not stated | 3080 MPap. 1: Flexural Modulus Flexural, ISO 178 | ISO 178 | not in the median: added filler or additive |
| Flexural strength orientation not stated | 29.6 MPap. 1: Flexural Strength Flexural, ISO 178 | ISO 178 | not in the median: added filler or additive |
| Charpy impact strength | 2.97 kJ/m2p. 1: Impact Strength Charpy Notch, ISO 179 | ISO 179notched | not in the median: added filler or additive |
| Izod impact strength | 10 kJ/m²p. 1: Izod Impact Strength | moulded bar (resin supplier's value), ISO 180As the sheet prints it: Izod Notch, ISO 180 | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 49 °Cp. 1: Heat Deflection Temp. HDT-B, ISO 75 | moulded bar (resin supplier's value), ISO 75As the sheet prints it: HDT B ISO 75 | not in the median: measured on a moulded bar |
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 60 °C for 4 hown data sheet
- Hardened nozzle
- not stated
Its 2 print profiles, in the documents' words
- Nozzle 195-220 °C; Bed 50-60 °CcolorFabb, Technical datasheet colorFabb copperFillp. 2: Recommended printing settings; p. 2: Bed / surface modification
- Drying 4 Hours @ 60 °CcolorFabb, Preliminary Data Sheet Copper filled PLAp. 1: Drying conditions (dehumidifying drier)
Price
Not in the price sample.
Its 3 documents
What the maker says (8)
- Good for
colorFabb copperFill is a high quality PLA 3D printing filament, loaded with copper particles, specially developed for aesthetic prints.
colorFabb, Technical datasheet colorFabb copperFillp. 1 - Surface finish
By polishing the part, the object will appear with a shiny copper effect, with a statue-like appearance.
colorFabb, Technical datasheet colorFabb copperFillp. 1 - Surface finish
Sanding and polishing your parts will make the bronze particle shimmer.
colorFabb, Technical datasheet colorFabb copperFillp. 2 - Surface finish
Start sanding with sandpaper of grid 120-180.
colorFabb, Technical datasheet colorFabb copperFillp. 2 - Surface finish
Start working your way up to sandpaper with grid 240-320, and finish with grit 600 – or higher.
colorFabb, Technical datasheet colorFabb copperFillp. 2 - Surface finish
Finally, use a clean soft cloth, and some copper polish.
colorFabb, Technical datasheet colorFabb copperFillp. 2 - Printing advice
Depending on your set-up, 3D printers and slice software, the copperFill requires more flow than normal PLA materials.
colorFabb, Technical datasheet colorFabb copperFillp. 2 - Printing advice
Since copperFill does not exhibit such swelling behavior, it is recommended to decrease the flow rate slightly (4-8% was sufficient for UM2, UM did not need adjustment).
colorFabb, Technical datasheet colorFabb copperFillp. 2
Fiberlogy FiberWORKS PLAStrength XY, MPa54Strength Z, MPa—Modulus XY, GPa4.2Charpy notched, kJ/m²4IzodHDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C50–70Chamber, °CnoneDrying, °C, h504 h
Fiberlogy FiberWORKS PLAFiberlogy
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET FiberWORKS PLA14 values | |||
| Tensile modulus orientation not stated | 3500 MPap. 1: Tensile Modulus ASTM D882 MPa | ASTM D882 | not in the median: measured on film |
| Tensile modulus orientation not stated | 4197 MPap. 2: Tensile Modulus ISO 527 MPa | ISO 527 | in the median |
| Tensile yield strength orientation not stated | 60 MPap. 1: Tensile Strength @ Yield ASTM D882 MPa | ASTM D882 | not in the median: measured on film |
| Tensile yield strength orientation not stated | 54 MPap. 2: Tensile Strength @ Yield ISO 527 MPa | ISO 527 | in the median |
| Tensile break strength orientation not stated | 53 MPap. 1: Tensile Strength @ Break ASTM D882 MPa | ASTM D882 | not in the median: measured on film |
| Tensile break strength orientation not stated | 50 MPap. 2: Tensile Strength @ Break ISO 527 MPa | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 6 %p. 1: Elongation @ Break ASTM D882 % | ASTM D882 | not in the median: measured on film |
| Elongation at break orientation not stated | 4 %p. 2: Elongation @ Break ISO 527 % | ISO 527 | in the median |
| Elongation at yield orientation not stated | 2 %p. 2: Elongation @ Yield ISO 527 % | ISO 527 | listed under other properties |
| Flexural modulus orientation not stated | 3379 MPap. 2: Flexural Modulus ISO 178 MPa | ISO 178 | in the median |
| Flexural strength orientation not stated | 96 MPap. 2: Flexural Strength ISO 178 MPa | ISO 178 | in the median |
| Izod impact strength | 4 kJ/m2p. 2: Izod Impact Strength (Notched) @ 23℃ ISO 180 kJ/m2 | ISO 180As the sheet prints it: 23℃ ISO 180 | in the median |
| HDT | 55 °Cp. 1: Heat Distortion Temperature ASTM E2092 °C | ASTM E2092As the sheet prints it: E2092 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm3p. 1: Specific Density ASTM D792 g/cm3 | ASTM D792 | |
| Fiberlogy, FiberWORKS PLA Filament 2×1 kg2 valuesUnless a row says otherwise: specimen not stated | |||
| Elongation at yield orientation not stated | 6%p. 1: Elongation at yield | ASTM D882 | listed under other properties |
| HDT at 0.45 MPa | 55°Cp. 1: Heat deflection temperature under load @ 0.45 MPa | ASTM E2092As the sheet prints it: ASTM E2092; 0.45 MPa | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 50–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °C for 4 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 200°C - 230°C; Bed 50°C - 70°CFiberlogy, TECHNICAL DATA SHEET FiberWORKS PLAp. 1: Recommended printing settings
- Nozzle 200°C – 230°C; Bed 50°C – 70°C; Drying 50°C / 4hFiberlogy, FiberWORKS PLA Filament 2×1 kgp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber
Price
Not in the price sample.
Its 3 documents
What the maker says (1)
- Good for
The FiberWORKS filament line was developed to optimize 3D printing processes in environments that require high repeatability.
Fiberlogy, FiberWORKS PLA Filament 2×1 kgp. 1
Fiberlogy IMPACT PLAStrength XY, MPa40Strength Z, MPa—Modulus XY, GPa2.87Charpy notched, kJ/m²—HDT 0.45, °C75HDT 1.8, °C75Price, CAD/kg—Nozzle, °C220–245Bed, °C50–70Chamber, °CnoneDrying, °C, h504 h
Fiberlogy IMPACT PLAFiberlogy
Data sheet shared with Spectrum PLA Pro and MatterHackers Tough PLA: their values are one table, recorded once.
Sold as toughened or impact-modified: "Thanks to its increased impact strength and higher temperature resistance" (Fiberlogy, PLA Impact Filament, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Fiberlogy, TECHNICAL DATA SHEET Fiberlogy IMPACT PLA9 valuesUnless a row says otherwise: printed specimenannealed at 110 °C for 0.25 hannealed at 110°C/15min | |||
| Tensile modulus XY | 2870 MPap. 1: Tensile Modulus ASTM D638 MPa | ASTM D638print settings3D printed parts, XY axis, 100% infill, annealed at 110°C/15min | in the median |
| Tensile strength (yield or break not stated) XY | 40 MPap. 1: Tensile Strength ASTM D638 MPa | ASTM D638print settings3D printed parts, XY axis, 100% infill, annealed at 110°C/15min | in the median |
| Flexural modulus XY | 2410 MPap. 1: Flexular Modulus ASTM D790 MPa | ASTM D790print settings3D printed parts, XY axis, 100% infill, annealed at 110°C/15min | in the median |
| Flexural strength XY | 73 MPap. 1: Flexular Strength ASTM D790 MPa | ASTM D790print settings3D printed parts, XY axis, 100% infill, annealed at 110°C/15min | in the median |
| Izod impact strength XY | 160 kJ/m2physically implausiblep. 1: Izod Impact Strength (Notched) @ 23℃ ASTM D256 kJ/m2 | ASTM D256As the sheet prints it: 23℃ ASTM D256print settings3D printed parts, XY axis, 100% infill, annealed at 110°C/15min | not in the median: physically implausible as published |
| HDT at 0.45 MPa | 75-85 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa* °C | ASTM E2092As the sheet prints it: 0.45 MPa E2092 | in the median |
| Glass transition temperature | 55-60 °Cp. 1: Glass Transition Temperature Tg °C | specimen not stated, ASTM D3418As the sheet prints it: D3418 | in the median |
| Melting temperature | 165-180 °Cp. 1: Melting Temperature Tm °C | specimen not stated, ASTM D3418As the sheet prints it: D3418 | |
| Density | 1.22 g/cm3p. 1: Specific Density ASTM D792 g/cm3 | specimen not stated, ASTM D792treatment not stated | |
| Fiberlogy, PLA Impact Filament1 value | |||
| Izod impact strength orientation not stated | 160 J/mp. 1: Izod impact strength (notched) @ 23°C | ASTM D256tested at 23 °C | not in the median: in J/m |
Print settings
- Nozzle
- 220–245 °Cown data sheet
- Bed
- 50–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °C for 4 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
- Annealing
- 110 °C for 0.25 hown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fiberlogy, PLA Impact Filament.
Its 2 print profiles, in the documents' words
- Nozzle 220°C - 245°C; Bed 50°C - 70°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy IMPACT PLAp. 1: Recommended printing settings
- Nozzle 220–245°C; Bed 60°C; Drying 50°C / 4 hoursFiberlogy, PLA Impact Filamentp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber
Price
Not in the price sample.
Its 3 documents
What the maker says (2)
- Good for
This material is ideal for producing functional prototypes, replacement parts, and tools exposed to mechanical and thermal stresses.
Fiberlogy, PLA Impact Filamentp. 1 - Benefits
Thanks to its increased impact strength and higher temperature resistance
Fiberlogy, PLA Impact Filamentp. 1
Prusa Research Prusament PLA High Speed by Prusa PolymersStrength XY, MPa68Strength Z, MPa—Modulus XY, GPa2.5Charpy notched, kJ/m²—HDT 0.45, °C57HDT 1.8, °C55Price, CAD/kg—Nozzle, °C190–230Bed, °C40–60Chamber, °CnoneDrying, °C, h508 h
Prusa Research Prusament PLA High Speed by Prusa PolymersPrusa Research
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Prusa Research, Technical datasheet Prusament PLA High Speed by Prusa Polymers18 valuesThe same values also in Prusa Research, Prusament PLA High Speed. | |||
| Tensile modulus XZ | 2.3 ± 0.1 GPap. 2: Tensile Modulus [GPa] | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Tensile yield strength orientation not stated | 64 ± 1 MPap. 2: Tensile Yield Strength for Filament [MPa] | ISO 527 | not in the median: measured on a filament strand |
| Tensile yield strength XZ | 65 ± 1 MPap. 2: Tensile Yield Strength [MPa] | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Elongation at yield XY | 3.9 ± 0.1 %p. 2: Elongation at Yield Point [%] | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Flexural modulus XY | 3.3 ± 0.1 GPap. 2: Flexural Modulus [GPa] (Horizontal (source label)) | ISO 178 | in the median |
| Flexural modulus XZ | 2.8 ± 0.1 GPap. 2: Flexural Modulus [GPa] (Vertical XZ (source label)) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 98 ± 1 MPap. 2: Flexural Strength [MPa] (Horizontal (source label)) | ISO 178 | in the median |
| Flexural strength XZ | 95 ± 2 MPap. 2: Flexural Strength [MPa] (Vertical XZ (source label)) | ISO 178 | not in the median: measured on a bar in another orientation |
| Charpy impact strength XY | 17 ± 1 kJ/m2p. 2: Impact Strength Charpy [kJ/m2](5) (Horizontal (source label)) | ISO 179As the sheet prints it: ISO 179-1; edgewise | not in the median: unnotched |
| Charpy impact strength XZ | 19 ± 1 kJ/m2p. 2: Impact Strength Charpy [kJ/m2](5) (Vertical XZ (source label)) | ISO 179As the sheet prints it: ISO 179-1; edgewise | not in the median: unnotched |
| Hardness | 85 Shore Dp. 2: Hardness – Shore D | no standard stated | in the median |
| HDT at 0.45 MPa | 57 °Cp. 2: Heat Deflection Temperature (0.45 MPa) [°C]also in Prusa Research, Prusament PLA High Speed | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 55 °Cp. 2: Heat Deflection Temperature (1.80 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 1.80 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm3p. 2: Density [g/cm3] | ISO 1183 | |
| Water absorption | 0.14 %p. 2: Moisture Absorption in 24 hours [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; time=24 hours; humidity=30 % | |
| Water absorption | 0.19 %p. 2: Moisture Absorption in 7 days [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; time=7 days; humidity=30 % | |
| Melt mass-flow rate | 22-24 g/10 minp. 2: MFR [g/10 min](1) | ISO 1133As the sheet prints it: ISO 1133; 2.16 kg | |
| Melt volume-flow rate | 20-22 cm3/10 minp. 2: MVR [cm3/10 min](1) | ISO 1133As the sheet prints it: ISO 1133; 2.16 kg | |
| Prusa Research, Prusament PLA High Speed3 valuesUnless a row says otherwise: printed bar (its stated orientation says so) | |||
| Tensile modulus XY | 2.5 GPap. 1: Tensile modulus | no standard stated | in the median |
| Tensile yield strength XY | 68 MPap. 1: Tensile yield strength | no standard stated | in the median |
| Interlayer adhesion strength orientation not stated | 41 MPap. 1: Interlayer adhesion | specimen not stated, no standard stated | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 40–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle [°C] 210 ± 20; Bed [°C] 50 ± 10Prusa Research, Technical datasheet Prusament PLA High Speed by Prusa Polymersp. 1: Recommended printing settings; p. 1: Bed Type
- Nozzle 210 ± 20 °C; Bed 50 ± 10 °CPrusa Research, Prusament PLA High Speedp. 1: Nozzle; p. 1: Recommended Steel Sheet; p. 1: Enclosure; p. 1: Printer requirements: Nozzle Temperature; Heatbed Temperature
Price
Not in the price sample.
Its 3 documents
What the maker says (49)
- Adhesion between layers
Prusament PLA High Speed has high layer-to-layer adhesion.
Prusa Research, Prusament PLA High Speedp. 1 - Precision and tolerance
Prusament PLA High Speed is our own in-house made filament with ±0.03mm manufacturing tolerance.
Prusa Research, Prusament PLA High Speedp. 1 - Benefits
The material offers high-speed printing, good bridges and overhangs, and great interlayer adhesion.
Prusa Research, Prusament PLA High Speedp. 1 - Good for
This makes it suitable for rapid prototyping of functional components.
Prusa Research, Prusament PLA High Speedp. 1 - Benefits
The fastest Prusament you can print with
Prusa Research, Prusament PLA High Speedp. 1 - Adhesion between layers
Improved layer-to-layer adhesion
Prusa Research, Prusament PLA High Speedp. 1 - Surface finish
Homogenous glossy surface finish
Prusa Research, Prusament PLA High Speedp. 1 - Warping and shrinkage
Little to no warping
Prusa Research, Prusament PLA High Speedp. 1 - Benefits
Easy to print, just like the regular PLA
Prusa Research, Prusament PLA High Speedp. 1 - Pitfalls and limitations
Poor heat resistance, similar to PLA.
Prusa Research, Prusament PLA High Speedp. 1 - Pitfalls and limitations
For more resistant materials, use PETG or PC Blend.
Prusa Research, Prusament PLA High Speedp. 1 - Pitfalls and limitations
Some stringing occurs during the printing (can be eliminated with lighter or heatgun)
Prusa Research, Prusament PLA High Speedp. 1 - Good for
Rapid prototypes
Prusa Research, Prusament PLA High Speedp. 1 - Benefits
Prusament PLA High Speed can save up to 20-40% of print time, when compared to regular Prusament PLA.
Prusa Research, Prusament PLA High Speedp. 1 - Good for
This is suitable for making rapid prototypes before using expensive materials.
Prusa Research, Prusament PLA High Speedp. 1 - Good for
Quick replacement parts
Prusa Research, Prusament PLA High Speedp. 1 - Good for
This significantly improves its resistance in the Z axis and makes the material more suitable for quick replacement parts.
Prusa Research, Prusament PLA High Speedp. 1 - Good for
Visual models
Prusa Research, Prusament PLA High Speedp. 1 - Benefits
Fast cooling enables easier printing of bridges and overhangs.
Prusa Research, Prusament PLA High Speedp. 1 - Supports and removal
This reduces the necessity of using supports and makes better-looking models.
Prusa Research, Prusament PLA High Speedp. 1 - Warping and shrinkage
Susceptibility to warping Low
Prusa Research, Prusament PLA High Speedp. 1 - Printing advice
Post processing Difficult; Wet sanding required
Prusa Research, Prusament PLA High Speedp. 1 - Nozzle wear
Abrasivity None
Prusa Research, Prusament PLA High Speedp. 1 - Nozzle wear
0.4 mm brass high-flow (CHT) nozzle
Prusa Research, Prusament PLA High Speedp. 1 - Printing advice
Smooth PEI, Satin, TXT
Prusa Research, Prusament PLA High Speedp. 1 - Printing advice
Not necessary
Prusa Research, Prusament PLA High Speedp. 1 - Good for
Prusament PLA High Speed is a material developed for fast printing and rapid prototyping.
Prusa Research, Prusament PLA High Speedp. 1 - Adhesion between layers
This material has high layer-to-layer adhesion.
Prusa Research, Prusament PLA High Speedp. 1 - Adhesion between layers
The Prusament PLA High Speed offers a very high tensile strength anisotropy coefficient, r = 0.60.
Prusa Research, Prusament PLA High Speedp. 1 - Benefits
Thanks to enhanced interlayer adhesion and rapid solidification, the filament delivers great overhang performance even at higher ambient temperatures.
Prusa Research, Prusament PLA High Speedp. 1 - Surface finish
Prusament PLA High Speed has a satin-to-glossy, homogeneous surface finish.
Prusa Research, Prusament PLA High Speedp. 1 - Surface finish
This may be desired in some models, such as various vases.
Prusa Research, Prusament PLA High Speedp. 1 - Surface finish
However, the glossy finish tends to emphasize various surface imperfections and print errors.
Prusa Research, Prusament PLA High Speedp. 1 - Surface finish
Our high-speed PLA is more similar to that glossy PETG effect – a compromise we had to make to enable higher speeds.
Prusa Research, Prusament PLA High Speedp. 1 - Good for
Its high toughness with great dimensional stability makes it perfectly suitable for printing various rapid prototypes.
Prusa Research, Prusament PLA High Speedp. 1 - Adhesion between layers
Its mechanical resistance is improved with better layer-to-layer adhesion, and print times are shortened.
Prusa Research, Prusament PLA High Speedp. 1 - Good for
You can simply use it for “draft” prints that still need to maintain a professional look.
Prusa Research, Prusament PLA High Speedp. 1 - Pitfalls and limitations
PLA High Speed performs some minor stringing, even when dried.
Prusa Research, Prusament PLA High Speedp. 1 - Pitfalls and limitations
However, the strings are extremely thin and easy to remove using a lighter.
Prusa Research, Prusament PLA High Speedp. 1 - Printing advice
It is possible to tweak the settings in PrusaSlicer and reduce this phenomenon.
Prusa Research, Prusament PLA High Speedp. 1 - Printing advice
However, this significantly prolongs the print time.
Prusa Research, Prusament PLA High Speedp. 1 - Benefits
PLA High Speed is one of the easiest-to-print filaments we make.
Prusa Research, Prusament PLA High Speedp. 1 - Benefits
It’s reliable, and it doesn’t require any print preparations or difficult post-processing methods.
Prusa Research, Prusament PLA High Speedp. 1 - Good for
If you’re new to 3D printing, it’s a great idea to start with PLA High Speed before using other materials.
Prusa Research, Prusament PLA High Speedp. 1 - Printing advice
To achieve the best adhesion, it is important to keep the surface clean.
Prusa Research, Prusament PLA High Speedp. 1 - Printing advice
The best option is Isopropyl alcohol available in drugstores, which works the best for PLA and other materials as well.
Prusa Research, Prusament PLA High Speedp. 1 - Printing advice
The print sheet should be cleaned while cold for the best results.
Prusa Research, Prusament PLA High Speedp. 1 - Printing advice
When post-processing PLA High Speed, it’s better to use wet sanding.
Prusa Research, Prusament PLA High Speedp. 1 - Printing advice
Without water, you’ll quickly start heating the plastic by friction, it will melt locally and deform.
Prusa Research, Prusament PLA High Speedp. 1
Prusa Research Prusament PLA Recycled by Prusa PolymersStrength XY, MPa49Strength Z, MPa—Modulus XY, GPa2.1Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C53Price, CAD/kg—Nozzle, °C200–220Bed, °C40–60Chamber, °CnoneDrying, °C, h508 h
Prusa Research Prusament PLA Recycled by Prusa PolymersPrusa Research
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Prusa Research, Technical datasheet Prusament PLA Recycled by Prusa Polymers20 values | |||
| Tensile modulus XY | 2.1 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | in the median |
| Tensile modulus XZ | 2.3 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Tensile yield strength XY | 49.0 ± 4.0 MPap. 2: Tensile Yield Strength [MPa] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | in the median |
| Tensile yield strength orientation not stated | 54 ± 1 MPap. 2: Tensile Yield Strength Filament [MPa] | ISO 527 | not in the median: measured on a filament strand |
| Tensile yield strength XZ | 55.0 ± 2.0 MPap. 2: Tensile Yield Strength [MPa] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Elongation at yield XY | 3.1 ± 0.1 %p. 2: Elongation at Yield Point (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Elongation at yield XZ | 2.9 ± 0.1 %p. 2: Elongation at Yield Point (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Flexural modulus XY | 3.1 ± 0.1 GPap. 2: Flexural Modulus (Horizontal (source label)) | ISO 178 | in the median |
| Flexural modulus XZ | 3.0 ± 0.1 GPap. 2: Flexural Modulus (Vertical XZ (source label)) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 82.0 ± 2.0 MPap. 2: Flexural Strength (Horizontal (source label)) | ISO 178 | in the median |
| Flexural strength XZ | 87.0 ± 2.0 MPap. 2: Flexural Strength (Vertical XZ (source label)) | ISO 178 | not in the median: measured on a bar in another orientation |
| Charpy impact strength XY | 14.0 ± 2.0 kJ/m²p. 2: Impact Strength Charpy [kJ/m²](4) (Horizontal (source label)) | ISO 179As the sheet prints it: ISO 179-1 | not in the median: unnotched |
| Charpy impact strength XZ | 13.0 ± 1.0 kJ/m²p. 2: Impact Strength Charpy [kJ/m²](4) (Vertical XZ (source label)) | ISO 179As the sheet prints it: ISO 179-1 | not in the median: unnotched |
| Hardness | 80 Shore Dp. 2: Hardness – Shore D | no standard stated | in the median |
| Interlayer adhesion strength orientation not stated | 21 ± 2 MPap. 2: Interlayer Adhesion [MPa] | no standard namedAs the sheet prints it: Prusa Polymers | |
| HDT at 0.45 MPa | 55 °Cp. 2: Heat Deflection Temperature (0,45 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 53 °Cp. 2: Heat Deflection Temperature (1,80 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 1.80 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm³p. 2: Density | ISO 1183 | |
| Water absorption | 0.3 %p. 2: Moisture Absorption 24 hours [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; time=24 hours; humidity=37 % | |
| Melt mass-flow rate | 9–11 g/10 minp. 2: MFR [g/10 min](1) | ISO 1133As the sheet prints it: ISO 1133; 2.16 kg | |
Print settings
- Nozzle
- 200–220 °Cown data sheet
- Bed
- 40–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle [°C] 210 ± 10; Bed [°C] 40–60Prusa Research, Technical datasheet Prusament PLA Recycled by Prusa Polymersp. 1: Recommended printing settings
- Bed 40–60 °C Heated Bed OptionalPrusa Research, Prusament PLA Recycledp. 1: Bed Temperature; p. 1: Enclosure; p. 1: Print Surface
Price
Not in the price sample.
Its 3 documents
What the maker says (45)
- Warping and shrinkage
Thanks to its minimal thermal expansion, PLA is a great choice for large prints. No warping, no layer separation.
Prusa Research, Prusament PLA Recycledp. 1 - Precision and tolerance
Prusament PLA Recycled is our own in-house made filament with ±0.05mm manufacturing tolerance.
Prusa Research, Prusament PLA Recycledp. 1 - Surface finish
100 % of the material consists of recycled Prusament PLA materials, so every batch has a different color.
Prusa Research, Prusament PLA Recycledp. 1 - Benefits
Easy to print
Prusa Research, Prusament PLA Recycledp. 1 - Precision and tolerance
Can print tiny parts
Prusa Research, Prusament PLA Recycledp. 1 - Good for
Can print huge objects
Prusa Research, Prusament PLA Recycledp. 1 - Pitfalls and limitations
Low temperature resistance
Prusa Research, Prusament PLA Recycledp. 1 - Pitfalls and limitations
Difficult post-processing
Prusa Research, Prusament PLA Recycledp. 1 - Good for
Action figures often include tons of small features. Printing them with PLA is easy at almost any scale
Prusa Research, Prusament PLA Recycledp. 1 - Good for
PLA is perfect for printing small and detailed objects, such as jewelry.
Prusa Research, Prusament PLA Recycledp. 1 - Precision and tolerance
Whether it’s a necklace or an earring, you can expect clean edges and no stringing, especially if coupled with a smaller nozzle.
Prusa Research, Prusament PLA Recycledp. 1 - Good for
Thanks to its minimal thermal expansion, PLA is a great choice for large prints.
Prusa Research, Prusament PLA Recycledp. 1 - Warping and shrinkage
No warping, no layer separation.
Prusa Research, Prusament PLA Recycledp. 1 - Benefits
Printing difficulty Easy
Prusa Research, Prusament PLA Recycledp. 1 - Warping and shrinkage
Susceptibility to warping None
Prusa Research, Prusament PLA Recycledp. 1 - Odour and emissions
Odor No odor
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
Post processing Difficult; Wet sanding
Prusa Research, Prusament PLA Recycledp. 1 - Precision and tolerance
Details Under 0.2 mm
Prusa Research, Prusament PLA Recycledp. 1 - Nozzle wear
Abrasivity None
Prusa Research, Prusament PLA Recycledp. 1 - Pitfalls and limitations
It’s a hard material, but that also means it’s somewhat brittle, and once it breaks, it likes to shatter.
Prusa Research, Prusament PLA Recycledp. 1 - Benefits
Unlike so-called thermoset materials, PLA can be heated past its melting point multiple times with very little degradation.
Prusa Research, Prusament PLA Recycledp. 1 - Good for
The best use of PLA is for printing concept models, prototypes, miniatures, jewelry, low-wear toys, etc.
Prusa Research, Prusament PLA Recycledp. 1 - Pitfalls and limitations
The low print temperature also means low-temperature resistance.
Prusa Research, Prusament PLA Recycledp. 1 - Pitfalls and limitations
Parts start to lose mechanical strength at temperatures over 60 °C.
Prusa Research, Prusament PLA Recycledp. 1 - Pitfalls and limitations
The combination of being both biodegradable and having low-temperature resistance means that it’s not ideal for outdoor use, also due to the low UV-resistance.
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
Use glue to connect multiple parts together.
Prusa Research, Prusament PLA Recycledp. 1 - Pitfalls and limitations
Even though PLA is biodegradable, and the material on its own is food safe, we suggest not to drink or eat from your 3D prints repeatedly.
Prusa Research, Prusament PLA Recycledp. 1 - Pitfalls and limitations
It’s because of the small fractures in the print surface, which means bacteria can build up in there over time.
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
You can prevent this by applying a food-safe coating.
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
Heated Bed Optional Enclosure not required
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
Print Surface PEI Glass plate Painter’s tape Glue stick
Prusa Research, Prusament PLA Recycledp. 1 - Nozzle wear
No special hot-end required
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
Part Cooling Fan Required
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
To achieve the best adhesion of the print surface, it is important to keep it clean.
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
Cleaning the surface is simple: the best option is Isopropyl alcohol ( available in drugstores) which works best not just for PLA, but other materials as well.
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
Pour a small amount of IPA on an unscented paper towel and wipe the print surface.
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
The bed should be cleaned when it’s cold for the best results but it can also be cleaned when already preheated for PLA, just be careful not to touch the bed surface or the nozzle.
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
But keep in mind that when cleaning at higher temperatures, the alcohol will evaporate before it can clean anything.
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
Alternatively, you can clean the bed with warm water and a few drops of dish soap on a paper towel.
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
Denatured alcohol is also another option.
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
When post-processing PLA, it’s better to use wet sanding.
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
Without water you’ll quickly start heating the plastic by friction, it will melt locally and make it hard to keep sanding.
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
Feel free to cool PLA during printing as much as possible.
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
With good enough cooling you can print extreme overhangs and bridge between far away surfaces.
Prusa Research, Prusament PLA Recycledp. 1 - Printing advice
If you’re in need of a durable part, increase the number of perimeters rather than increasing the infill percentage as the majority of a 3D print strength comes from its outer shell.
Prusa Research, Prusament PLA Recycledp. 1
Prusa Research Prusament rPLA Natural Pigments by Prusa PolymersStrength XY, MPa44Strength Z, MPa—Modulus XY, GPa2.3Charpy notched, kJ/m²—HDT 0.45, °C61HDT 1.8, °C59Price, CAD/kg—Nozzle, °C195–215Bed, °C40–60Chamber, °CnoneDrying, °C, h508 h
Prusa Research Prusament rPLA Natural Pigments by Prusa PolymersPrusa Research
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Prusa Research, Technical datasheet Prusament rPLA Natural Pigments by Prusa Polymers22 values | |||
| Tensile modulus XY | 2.3 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | in the median |
| Tensile modulus XZ | 2.4 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Tensile yield strength XY | 50.6 ± 1 MPap. 2: Tensile Yield Strength [MPa] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Tensile yield strength orientation not stated | 51 ± 1 MPap. 2: Tensile Yield Strength for Filament [MPa] | ISO 527 | not in the median: measured on a filament strand |
| Tensile yield strength XZ | 52 ± 1 MPap. 2: Tensile Yield Strength [MPa] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Elongation at yield XY | 3.1 ± 0.1 %p. 2: Elongation at Yield Point [%] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Elongation at yield XZ | 3.1 ± 0.1 %p. 2: Elongation at Yield Point [%] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Flexural modulus XY | 3.0 ± 0.1 GPap. 2: Flexural Modulus [GPa] (Horizontal (source label)) | ISO 178 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Flexural modulus XZ | 2.8 ± 0.2 GPap. 2: Flexural Modulus [GPa] (Vertical XZ (source label)) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 75 ± 2 MPap. 2: Flexural Strength [MPa] (Horizontal (source label)) | ISO 178 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Flexural strength XZ | 77 ± 3 MPap. 2: Flexural Strength [MPa] (Vertical XZ (source label)) | ISO 178 | not in the median: measured on a bar in another orientation |
| Charpy impact strength XY | 12 ± 2 kJ/m2p. 2: Impact Strength Charpy [kJ/m2](4) (Horizontal (source label)) | ISO 179As the sheet prints it: ISO 179-1; edgewise | not in the median: unnotched |
| Charpy impact strength XZ | 13 ± 2 kJ/m2p. 2: Impact Strength Charpy [kJ/m2](4) (Vertical XZ (source label)) | ISO 179As the sheet prints it: ISO 179-1; edgewise | not in the median: unnotched |
| Hardness | 86 Shore Dp. 2: Hardness – Shore D | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Interlayer adhesion strength orientation not stated | 23 ± 2 MPap. 2: Interlayer Adhesion [MPa] | no standard namedAs the sheet prints it: Prusa Polymers | |
| HDT at 0.45 MPa | 61 °Cp. 2: Heat Deflection Temperature (0.45 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 59 °Cp. 2: Heat Deflection Temperature (1.80 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 1.80 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm3p. 2: Density [g/cm3] | ISO 1183 | |
| Water absorption | 0.30 %p. 2: Moisture Absorption in 24 hours [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; time=24 hours; humidity=22 % | |
| Water absorption | 0.36 %p. 2: Moisture Absorption in 7 days [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; time=7 days; humidity=22 % | |
| Melt mass-flow rate | 21–26 g/10 minp. 2: MFR [g/10 min](1) | ISO 1133As the sheet prints it: ISO 1133; 2.16 kg | |
| Melt volume-flow rate | 27–32 cm3/10 minp. 2: MVR [cm3/10 min](1) | ISO 1133As the sheet prints it: ISO 1133; 2.16 kg | |
| Prusa Research, Technical datasheet Prusament rPLA Natural Pigments by Prusa Polymers20 values | |||
| Tensile modulus XZ | 2.5 ± 0.1 GPap. 2: Tensile Modulus [GPa] | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Tensile yield strength XY | 44.0 ± 2 MPap. 2: Tensile Yield Strength [MPa] | ISO 527As the sheet prints it: ISO 527-1 | in the median |
| Tensile yield strength orientation not stated | 53 ± 1 MPap. 2: Tensile Yield Strength for Filament [MPa] | ISO 527 | not in the median: measured on a filament strand |
| Elongation at yield XY | 3.0 ± 0.2 %p. 2: Elongation at Yield Point [%] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Elongation at yield XZ | 3.2 ± 0.1 %p. 2: Elongation at Yield Point [%] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Flexural modulus XY | 3.4 ± 0.2 GPap. 2: Flexural Modulus [GPa] (Horizontal (source label)) | ISO 178 | in the median |
| Flexural modulus XZ | 2.7 ± 0.3 GPap. 2: Flexural Modulus [GPa] (Vertical XZ (source label)) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 79 ± 2 MPap. 2: Flexural Strength [MPa] (Horizontal (source label)) | ISO 178 | in the median |
| Flexural strength XZ | 81 ± 2 MPap. 2: Flexural Strength [MPa] (Vertical XZ (source label)) | ISO 178 | not in the median: measured on a bar in another orientation |
| Charpy impact strength XY | 13 ± 2 kJ/m2p. 2: Impact Strength Charpy [kJ/m2](4) (Horizontal (source label)) | ISO 179As the sheet prints it: ISO 179-1; blow=edgewise | not in the median: unnotched |
| Charpy impact strength XZ | 14 ± 2 kJ/m2p. 2: Impact Strength Charpy [kJ/m2](4) (Vertical XZ (source label)) | ISO 179As the sheet prints it: ISO 179-1; blow=edgewise | not in the median: unnotched |
| Hardness | 87 Shore Dp. 2: Hardness – Shore D | no standard stated | in the median |
| Interlayer adhesion strength orientation not stated | 22 ± 1 MPap. 2: Interlayer Adhesion [MPa] | no standard namedAs the sheet prints it: Prusa Polymers | |
| HDT at 0.45 MPa | 59 °Cp. 2: Heat Deflection Temperature (0.45 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | not in the median: another value of this product is in it |
| HDT at 1.8 MPa | 60 °Cp. 2: Heat Deflection Temperature (1.80 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 1.80 MPa | not in the median: another value of this product is in it |
| Density | 1.09 g/cm3p. 2: Density [g/cm3] | ISO 1183 | |
| Water absorption | 0.14 %p. 2: Moisture Absorption in 24 hours [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; duration=24 hours; humidity=22 % | |
| Water absorption | 0.22 %p. 2: Moisture Absorption in 7 days [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; duration=7 days; humidity=22 % | |
| Melt mass-flow rate | 12–13 g/10 minp. 2: MFR [g/10 min](1) | ISO 1133As the sheet prints it: ISO 1133; 2.16 kg | |
| Melt volume-flow rate | 11–12 cm3/10 minp. 2: MVR [cm3/10 min](1) | ISO 1133As the sheet prints it: ISO 1133; 2.16 kg | |
Print settings
- Nozzle
- 195–215 °Cown data sheet
- Bed
- 40–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 3 print profiles, in the documents' words
- Nozzle [°C] 205 ± 10; Bed [°C] 40–60Prusa Research, Technical datasheet Prusament rPLA Natural Pigments by Prusa Polymersp. 1: Recommended printing settings; p. 1: Bed Type
- Nozzle [°C] 205 ± 10; Bed [°C] 40–60Prusa Research, Technical datasheet Prusament rPLA Natural Pigments by Prusa Polymersp. 1: Recommended printing settings; p. 1: Bed Type
- Bed 40–60 °CPrusa Research, Prusament rPLAp. 1: Bed Temperature; p. 1: Enclosure; p. 1: Print Surface
Price
Not in the price sample.
Its 4 documents
What the maker says (33)
- Good for
The pleasant and subtle colors make the rPLA Natural Pigments suitable for various home decor accessories.
Prusa Research, Prusament rPLAp. 1 - Precision and tolerance
Prusament rPLA Natural Pigments is our own in-house made filament with ±0.03mm manufacturing tolerance.
Prusa Research, Prusament rPLAp. 1 - Benefits
Easy to print
Prusa Research, Prusament rPLAp. 1 - Surface finish
Nice subtle colors
Prusa Research, Prusament rPLAp. 1 - Precision and tolerance
Can print tiny parts
Prusa Research, Prusament rPLAp. 1 - Benefits
Can print huge objects
Prusa Research, Prusament rPLAp. 1 - Pitfalls and limitations
Low temperature resistance
Prusa Research, Prusament rPLAp. 1 - Pitfalls and limitations
Difficult post-processing
Prusa Research, Prusament rPLAp. 1 - Moisture sensitivity
Higher moisture absorbtion
Prusa Research, Prusament rPLAp. 1 - Good for
Furniture parts
Prusa Research, Prusament rPLAp. 1 - Good for
Warm colors perfectly match wooden furniture and allow various designs and functional parts to be made.
Prusa Research, Prusament rPLAp. 1 - Good for
Toys and visual parts
Prusa Research, Prusament rPLAp. 1 - Good for
Easy printability and fast printing allow the making of both large and tiny objects with great looks.
Prusa Research, Prusament rPLAp. 1 - Warping and shrinkage
Susceptibility to warping Low
Prusa Research, Prusament rPLAp. 1 - Odour and emissions
Odor Medium (non-toxic)
Prusa Research, Prusament rPLAp. 1 - Nozzle wear
Abrasivity None
Prusa Research, Prusament rPLAp. 1 - Precision and tolerance
Details Under 0.2 mm
Prusa Research, Prusament rPLAp. 1 - Odour and emissions
The organic additives create a noticeable scent during printing.
Prusa Research, Prusament rPLAp. 1 - Pitfalls and limitations
The Prusament rPLA Natural Pigments has mechanical properties similar to regular PLA, but it is slightly more brittle and hygroscopic.
Prusa Research, Prusament rPLAp. 1 - Good for
In general, PLA is used for various aesthetic models, prototypes, and other visual parts.
Prusa Research, Prusament rPLAp. 1 - Surface finish
Last but not least, the natural pigments give rPLA pleasant subtle colors , perfectly suitable for various home decor and other aesthetic purposes.
Prusa Research, Prusament rPLAp. 1 - Printing advice
To achieve the best adhesion of the print surface, it is important to keep it clean.
Prusa Research, Prusament rPLAp. 1 - Printing advice
Cleaning the surface is simple: the best option is Isopropyl alcohol ( available in drugstores) which works best not just for PLA, but other materials as well.
Prusa Research, Prusament rPLAp. 1 - Printing advice
Pour a small amount of IPA on an unscented paper towel and wipe the print surface.
Prusa Research, Prusament rPLAp. 1 - Printing advice
The bed should be cleaned when it’s cold for the best results but it can also be cleaned when already preheated for PLA, just be careful not to touch the bed surface or the nozzle.
Prusa Research, Prusament rPLAp. 1 - Printing advice
But keep in mind that when cleaning at higher temperatures, the alcohol will evaporate before it can clean anything.
Prusa Research, Prusament rPLAp. 1 - Printing advice
Alternatively, you can clean the bed with warm water and a few drops of dish soap on a paper towel.
Prusa Research, Prusament rPLAp. 1 - Printing advice
Denatured alcohol is also another option.
Prusa Research, Prusament rPLAp. 1 - Printing advice
When post-processing PLA, it’s better to use wet sanding.
Prusa Research, Prusament rPLAp. 1 - Printing advice
Without water you’ll quickly start heating the plastic by friction, it will melt locally and make it hard to keep sanding.
Prusa Research, Prusament rPLAp. 1 - Printing advice
Feel free to cool PLA during printing as much as possible.
Prusa Research, Prusament rPLAp. 1 - Printing advice
With good enough cooling you can print extreme overhangs and bridge between far away surfaces.
Prusa Research, Prusament rPLAp. 1 - Printing advice
If you’re in need of a durable part, increase the number of perimeters rather than increasing the infill percentage as the majority of a 3D print strength comes from its outer shell.
Prusa Research, Prusament rPLAp. 1
Spectrum PLA ProStrength XY, MPa40Strength Z, MPa—Modulus XY, GPa2.87Charpy notched, kJ/m²—HDT 0.45, °C75HDT 1.8, °C75Price, CAD/kg48Nozzle, °C185–230Bed, °C0–45Chamber, °CnoneDrying, °C, h504 h
Spectrum PLA ProSpectrum
Data sheet shared with Fiberlogy IMPACT PLA and MatterHackers Tough PLA: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Spectrum, TECHNICAL DATA SHEET PLA Pro10 valuesUnless a row says otherwise: printed specimenannealed at 110 °C for 0.333 h3D printed at 100% infill and annealed at 110°C/20 min, XY axis | |||
| Tensile modulus XY | 2865 MPap. 1: Tensile Modulus | ASTM D638As the sheet prints it: D 638 | in the median |
| Tensile strength (yield or break not stated) XY | 40 Mpap. 1: Tensile Strength | ASTM D638As the sheet prints it: D 638 | in the median |
| Flexural modulus XY | 2414 Mpap. 1: Flexural Modulus | ASTM D790As the sheet prints it: D 790 | in the median |
| Flexural strength XY | 73 MPap. 1: Flexural Strength | ASTM D790As the sheet prints it: D 790 | in the median |
| Izod impact strength XY | 160 J/mp. 1: Notched Izod Impact [amorphous] | ASTM D256As the sheet prints it: D 256 | not in the median: in J/m |
| Izod impact strength XY | 233 J/mp. 1: Notched Izod Impact [crystaline] | ASTM D256As the sheet prints it: D 256 | not in the median: in J/m |
| HDT | 75-85 °Cp. 1: Heat Distortion Temperature | ASTM E2092As the sheet prints it: E 2092 | not in the median: set apart (never used to pass), no stated test load |
| Glass transition temperature | 55-60 °Cp. 1: Glass Transition Temperature | specimen not stated, ASTM D3418As the sheet prints it: D 3418 | in the median |
| Density | 1.22 g/cm3p. 1: Specific Gravity | specimen not stated, ASTM D792As the sheet prints it: D 792 | |
| Melt mass-flow rate | 9-15 g/10 minp. 1: MFR (210°C, 2.16kg) | specimen not stated, ASTM D1238As the sheet prints it: 210°C 2.16kg D 1238 | |
Spectrum, TECHNICAL DATA SHEET PLA Pro2 valuesUnless a row says otherwise: printed specimenannealed at 110 °C for 0.333 h3D printed at 100% infill and annealed at 110°C/20 min, XY axis | |||
| Izod impact strength | 160 J/mp. 1: Notched Izod Impact [amorphous] | ASTM D256As the sheet prints it: D 256 | not in the median: in J/m |
| Izod impact strength | 233 J/mp. 1: Notched Izod Impact [crystaline] | ASTM D256As the sheet prints it: D 256 | not in the median: in J/m |
| MatterHackers, TECHNICAL DATA SHEET - PRO Series Tough PLA1 value | |||
| Izod impact strength orientation not stated | 160 J/mp. 1: Impact Strength | ASTM D256As the sheet prints it: D256 | not in the median: in J/m |
| Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO1 value | |||
| HDT | 85°Cp. 4: HDT | no standard statedannealed at a temperature its sheet does not state for a time its sheet does not stateannealed | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
Print settings
- Nozzle
- 185–230 °Cown data sheet
- Bed
- 0–45 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °C for 4 hFiberlogy IMPACT PLA's data sheet, shared
- Hardened nozzle
- not neededown data sheet
- Annealing
- 110 °C for 0.333 h; temperature not statedown data sheet
Its 4 print profiles, in the documents' words
- Nozzle 185-230°C; Bed 0-45°CSpectrum, TECHNICAL DATA SHEET PLA Prop. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box; p. 1: settings footnote
- Nozzle 185-230°C; Bed 0-45°CSpectrum, TECHNICAL DATA SHEET PLA Prop. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box; p. 1: settings footnote
- Nozzle 185-230 °C; Chamber not necessarySpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Nozzle temp. [°C]; p. 4: Closed chamber for printing; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
Price
48 CAD/kgits one regular price in the sample
1 listing
- 3D Printing Canada: 48 CAD/kgIvory Beige - Spectrum PLA Pro Filament - 1.75mm, 1kg (SKU 67bbb438344d3)in its price; seen 30 Sep 2026
Its 6 documents
- Spectrum, TECHNICAL DATA SHEET PLA Pro
- Spectrum, TECHNICAL DATA SHEET PLA Pro
- MatterHackers, TECHNICAL DATA SHEET - PRO Series Tough PLA
- Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO
- Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29
- Bambu Lab, H2C Filamant Printing Guide | Bambu Lab Wiki
What the maker says (8)
- Benefits
good alternative for styrene-based materials
Spectrum, TECHNICAL DATA SHEET PLA Prop. 1 - Benefits
extremely high impact resistance as compared to classic materials based on PLA
Spectrum, TECHNICAL DATA SHEET PLA Prop. 1 - Benefits
high durability comparable to ABS prints
Spectrum, TECHNICAL DATA SHEET PLA Prop. 1 - Benefits
higher process capacity due to the possibility to increase the printing speed (as a consequence of improved flowability)
Spectrum, TECHNICAL DATA SHEET PLA Prop. 1 - Surface finish
perfect side surface
Spectrum, TECHNICAL DATA SHEET PLA Prop. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET PLA Prop. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET PLA Prop. 1 - Benefits
Alternative to ABS, high impact strength, improved heat-resistance & flow index
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20
3D4Makers Facilan C8Strength XY, MPa45Strength Z, MPa—Modulus XY, GPa3Charpy notched, kJ/m²7IzodHDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C180–210Bed, °C25–50Chamber, °C—Drying, °C, h—
3D4Makers Facilan C83D4Makers
Modified: undisclosed dense filler. Its values are kept out of the material's medians.
Sold as toughened or impact-modified: "has higher impact strength than PLA" (3D4Makers, Facilan™ C8 Filament, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3D4Makers, Facilan™ C8 Filament8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3000 MPap. 1: Tensile Modulus | no standard stated | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) orientation not stated | 45 MPap. 1: Tensile Strength | printed specimen (implied by the document), no standard stated | not in the median: added filler or additive |
| Elongation at yield orientation not stated | 4%p. 1: Elongation at yield | no standard stated | listed under other properties |
| Flexural modulus orientation not stated | 3640 MPap. 1: Flexural Modulus | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Flexural strength orientation not stated | 67 MPap. 1: Flexural Strength | printed specimen (implied by the document), no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Izod impact strength orientation not stated | 7 kJ/m2p. 1: Izod impact strength (notched) | no standard namedAs the sheet prints it: notched | not in the median: added filler or additive |
| Hardness | 72 Shore Dp. 1: Shore D Hardness | no standard stated | not in the median: added filler or additive |
| HDT | 55°Cp. 1: Heat Deflection Temperature | no standard stated | not in the median: added filler or additive |
| 3D4Makers, Technical Data Sheet 3D Printing Filament Facilan™ C83 valuesUnless a row says otherwise: printed specimen (implied by the document) | |||
| Flexural modulus orientation not stated | 3650 MPap. 1: Flexural Modulus | ISO 178 | not in the median: added filler or additive |
| Flexural strength orientation not stated | 65 MPap. 1: Flexural Strength | ISO 178 | not in the median: added filler or additive |
| Density | 1.4 g/cm³p. 1: Density | specimen not stated, ISO 1183As the sheet prints it: ISO1183-1 | |
Print settings
- Nozzle
- 180–210 °Cown data sheet
- Bed
- 25–50 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in 3D4Makers, Facilan™ C8 Filament.
Its 2 print profiles, in the documents' words
- Nozzle 180-210°C; Bed 25-50°C3D4Makers, Technical Data Sheet 3D Printing Filament Facilan™ C8p. 1: Recommended printing settings: NozzleTemperature; p. 1: Bed Adhesion
- Nozzle 195 °C (180-210°C); Bed 35-50 °C3D4Makers, Facilan™ C8 Filamentp. 1: Bed Temperature; p. 1: Adhesion; p. 1: Print Temperature
Price
Not in the price sample.
Its 3 documents
What the maker says (16)
- Surface finish
On most printers, Facilan™ C8 should 3D Print without visible layers.
3D4Makers, Facilan™ C8 Filamentp. 1 - Benefits
has higher impact strength than PLA
3D4Makers, Facilan™ C8 Filamentp. 1 - Good for
Facilan ™ C8 is an Additive Manufacturing Filament Designed for Manufacturing using 3D Printing.
3D4Makers, Facilan™ C8 Filamentp. 1 - Benefits
Facilan ™ C8 Fused Deposition Modelling filament has a higher tensile strength than ABS
3D4Makers, Facilan™ C8 Filamentp. 1 - Benefits
Facilan™ C8 has higher impact strength than PLA .
3D4Makers, Facilan™ C8 Filamentp. 1 - Surface finish
On most printers, Facilan™ C8 should 3D Print without visible layers .
3D4Makers, Facilan™ C8 Filamentp. 1 - Adhesion between layers
Facilan™ C8 has the best layer adhesion properties of any 3D printing material.
3D4Makers, Facilan™ C8 Filamentp. 1 - Surface finish
Facilan™ C8 has the best surface quality of any FDM material.
3D4Makers, Facilan™ C8 Filamentp. 1 - Surface finish
The material has a soft touch feel.
3D4Makers, Facilan™ C8 Filamentp. 1 - Surface finish
Facilan™ C8 should be smooth with an even matte surface finish.
3D4Makers, Facilan™ C8 Filamentp. 1 - Good for
Developed for high throughput manufacturing applications.
3D4Makers, Facilan™ C8 Filamentp. 1 - Good for
Consumer-friendly parts for true Additive Manufacturing .
3D4Makers, Facilan™ C8 Filamentp. 1 - Printing advice
Facilan™ C8's printing profile is available in the Ultimaker Cura Marketplace .
3D4Makers, Facilan™ C8 Filamentp. 1 - Good for
This material has been designed to be used in manufacturing applications.
3D4Makers, Facilan™ C8 Filamentp. 1 - Adhesion between layers
With better interlayer bonding, smoother surfaces as well as higher strength, Facilan™ C8 is a true Additive Manufacturing material made for demanding end-use part applications.
3D4Makers, Facilan™ C8 Filamentp. 1 - Printing advice
Adhesion : Magigoo Original on glass or a PEI Sheet
3D4Makers, Facilan™ C8 Filamentp. 1
MatterHackers Tough PLAStrength XY, MPa40Strength Z, MPa—Modulus XY, GPa2.87Charpy notched, kJ/m²—HDT 0.45, °C75HDT 1.8, °C75Price, CAD/kg—Nozzle, °C190–230Bed, °C60–70Chamber, °CnoneDrying, °C, h504 h
MatterHackers Tough PLAMatterHackers
Data sheet shared with Spectrum PLA Pro and Fiberlogy IMPACT PLA: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| MatterHackers, TECHNICAL DATA SHEET - PRO Series Tough PLA7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2,865 MPap. 1: Tensile Modulus | ASTM D638As the sheet prints it: D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 40 MPap. 1: Tensile Strength | ASTM D638As the sheet prints it: D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 350 MPaphysically implausiblep. 1: Flexural Modulus | ASTM D790As the sheet prints it: D790 | not in the median: physically implausible as published |
| Flexural strength orientation not stated | 73 MPap. 1: Flexural Strength | ASTM D790As the sheet prints it: D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 75-80 °Cp. 1: Heat deflection temp. HDT/A | ASTM D3418As the sheet prints it: HDT/A D3418 | not in the median: set apart (never used to pass), test bar not described as printed |
| Melting temperature | 165-180 °Cp. 1: Melting Point | ASTM D1238As the sheet prints it: D1238 | |
| Density | 1.22 g/cm³p. 1: Density | ASTM D792As the sheet prints it: D792 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 60–70 °Cown data sheet
- Heated chamber
- not requiredSpectrum PLA Pro's data sheet, shared
- Drying
- 50 °C for 4 hFiberlogy IMPACT PLA's data sheet, shared
- Hardened nozzle
- not neededBambu Lab Filament Guide
- Annealing
- 110 °C for 0.333 h; temperature not statedSpectrum PLA Pro's data sheet, shared
Its print profile, in the documents' words
- Nozzle 190-230°C; Bed 60-70°CMatterHackers, TECHNICAL DATA SHEET - PRO Series Tough PLAp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (9)
- Warping and shrinkage
Uneven heating can lead to unexpected warpage and sub-optimal performance of the part
MatterHackers, TECHNICAL DATA SHEET - PRO Series Tough PLAp. 1 - Warping and shrinkage
Measure dimensions of the part prior to annealing and again after, to determine shrink.
MatterHackers, TECHNICAL DATA SHEET - PRO Series Tough PLAp. 1 - Printing advice
Annealing can be carried out in an oven or some other medium of heat-transfer, such as a hot water bath.
MatterHackers, TECHNICAL DATA SHEET - PRO Series Tough PLAp. 1 - Printing advice
Measure temperature at various locations in the oven to ensure absence of hot/cold spots.
MatterHackers, TECHNICAL DATA SHEET - PRO Series Tough PLAp. 1 - Printing advice
Typical time to anneal parts with wall-thickness of 0.125 in (~3.18 mm) is around 20 minutes, but this time is dependent on wall thickness.
MatterHackers, TECHNICAL DATA SHEET - PRO Series Tough PLAp. 1 - Printing advice
For large dimension parts, it is common to use support fixtures (e.g.-aluminum jigs) during the annealing process
MatterHackers, TECHNICAL DATA SHEET - PRO Series Tough PLAp. 1 - Printing advice
Once removed from the oven, let the part cool in ambient conditions.
MatterHackers, TECHNICAL DATA SHEET - PRO Series Tough PLAp. 1 - Printing advice
Minimize handling, as inside of the part will likely remain at elevated temperatures longer than the outside.
MatterHackers, TECHNICAL DATA SHEET - PRO Series Tough PLAp. 1 - Printing advice
If using a water-bath to anneal, the part may have to be at temperature for a slightly longer time to crystallize (since the water-bath cannot be at 110°C-120°C).
MatterHackers, TECHNICAL DATA SHEET - PRO Series Tough PLAp. 1
Chemicals and environment (1)
- Post-processing: described in words
Preheat the oven to an anneal temperature range of (110°C-120°C).
MatterHackers, TECHNICAL DATA SHEET - PRO Series Tough PLAp. 1: Annealing note
Fiberlogy EASY PLAStrength XY, MPa60Strength Z, MPa—Modulus XY, GPa3.5Charpy notched, kJ/m²2IzodHDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C50–70Chamber, °CnoneDrying, °C, h504 h
Fiberlogy EASY PLAFiberlogy
Data sheet shared with Fiberlogy R PLA: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy EASY PLA10 valuesThe same values also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy EASY PLA.Unless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Tensile modulus orientation not stated | 3500 MPap. 1: Tensile Modulus ASTM D882 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy EASY PLA | ASTM D882 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 60 MPap. 1: Tensile Strength @ Yield ASTM D882 MPa | ASTM D882 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 53 MPap. 1: Tensile Strength @ Break ASTM D882 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy EASY PLA | ASTM D882 | not in the median: another value of this product is in it |
| Elongation at yield orientation not stated | 6 %p. 1: Elongation @ Yield ASTM D882 %also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy EASY PLA | specimen not stated, ASTM D882 | listed under other properties |
| Flexural modulus orientation not stated | 3800 MPap. 1: Flexular Modulus ASTM D790 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy EASY PLA | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 81 MPap. 1: Flexular Strength ASTM D790 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy EASY PLA | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 16 J/mp. 1: Izod Impact Strength (Notched) @ 23°C ASTM D256 J/m | ASTM D256As the sheet prints it: 23°C ASTM D256 | not in the median: in J/m |
| HDT at 0.45 MPa | 55 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ASTM E2092 °Calso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy EASY PLA | ASTM E2092As the sheet prints it: 0.45 MPa E2092 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 55-60 °Cp. 1: Glass Transition Temperature Tg ASTM D3418 °Calso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy EASY PLA | specimen not stated, ASTM D3418 | in the median |
| Melting temperature | 145-160 °Cp. 1: Melting Temperature Tm ASTM D3418 °C | specimen not stated, ASTM D3418 | |
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy EASY PLA3 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Tensile yield strength orientation not stated | 50 MPap. 1: Tensile Strength @ Yield ISO 527 MPa | ISO 527 | not in the median: another value of this product is in it |
| Izod impact strength orientation not stated | 2 kJ/m²p. 1: Izod Impact Strength (Notched) @ 23°C | ISO 180tested at 23 °C | not in the median: set apart (never used to pass), test bar not described as printed |
| Melting temperature | 155-160 °Cp. 1: Melting Temperature Tm DSC °C | specimen not stated, DSCAs the sheet prints it: Tm DSC | |
| Fiberlogy, Easy PLA Filament2 valuesUnless a row says otherwise: specimen not stated | |||
| Izod impact strength orientation not stated | 16 J/mp. 1: Izod impact strength (notched) @ 23°C | ASTM D256tested at 23°C | not in the median: in J/m |
| Density | 1.24 g/cm³p. 1: Density | no standard stated | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 50–70 °Cown data sheet
- Heated chamber
- not requiredFiberlogy R PLA's data sheet, shared
- Drying
- 50 °C for 4 hFiberlogy R PLA's data sheet, shared
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 200°C - 230°C; Bed 50°C - 70°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy EASY PLAp. 1: Recommended printing settings
- Nozzle 200°C - 230°C; Bed 50°C - 70°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy EASY PLAp. 1: Recommended printing settings
Price
Not in the price sample.
Its 4 documents
What the maker says (15)
- Printing advice
EASY PLA is an exceptionally easy-to-use PLA filament for 3D printing
Fiberlogy, Easy PLA Filamentp. 1 - Benefits
EASY PLA is the most popular PLA filament for 3D printing—easy to use, ideal for beginners and professionals alike.
Fiberlogy, Easy PLA Filamentp. 1 - Precision and tolerance
It enables the creation of high-precision 3D prints without typical printing issues.
Fiberlogy, Easy PLA Filamentp. 1 - Benefits
A biodegradable, safe, and predictable material that opens the door to more ambitious projects.
Fiberlogy, Easy PLA Filamentp. 1 - Good for
Available in a wide range of vibrant colors—perfect for prototypes, decorations, and functional parts.
Fiberlogy, Easy PLA Filamentp. 1 - Benefits
EASY PLA is an exceptionally easy-to-use PLA filament for 3D printing that is extremely popular among both beginners and experienced users.
Fiberlogy, Easy PLA Filamentp. 1 - Benefits
Thanks to its reliability and user-friendly properties, it allows you to achieve very high-quality prints—without complications or frustration.
Fiberlogy, Easy PLA Filamentp. 1 - Good for
Regardless of your experience level, printing with Fiberlogy EASY PLA encourages you to tackle more ambitious and complex 3D projects.
Fiberlogy, Easy PLA Filamentp. 1 - Good for
It’s the perfect material to get started in the world of FDM printing —it helps you gain experience and provides a solid foundation before moving on to more advanced filaments.
Fiberlogy, Easy PLA Filamentp. 1 - Benefits
An additional advantage of EASY PLA is its biodegradability —the filament is made from polylactide (lactic acid), which makes it more environmentally friendly.
Fiberlogy, Easy PLA Filamentp. 1 - Precision and tolerance
3D prints made from this material are characterized by high precision and aesthetic appeal, making them look exceptionally good in any display or project.
Fiberlogy, Easy PLA Filamentp. 1 - Benefits
If you’re looking for a filament that combines ease of printing , eco-friendliness , and outstanding visual results , EASY PLA is an excellent choice.
Fiberlogy, Easy PLA Filamentp. 1 - Warping and shrinkage
NatureWorks’ PLA is characterized by high processing stability: it does not clog the nozzle, has a stable melting temperature, and minimal susceptibility to warping.
Fiberlogy, Easy PLA Filamentp. 1 - Adhesion between layers
Very good adhesion between print layers
Fiberlogy, Easy PLA Filamentp. 1 - Odour and emissions
No unpleasant odor
Fiberlogy, Easy PLA Filamentp. 1
Fiberlogy R PLAStrength XY, MPa53Strength Z, MPa—Modulus XY, GPa3.5Charpy notched, kJ/m²2IzodHDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C50–70Chamber, °CnoneDrying, °C, h504 h
Fiberlogy R PLAFiberlogy
Data sheet shared with Fiberlogy EASY PLA: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy R PLA7 valuesThe same values also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy R PLA.Unless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Tensile modulus orientation not stated | 3500 MPap. 1: Tensile Modulus ISO 527 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy R PLA | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 53 MPap. 1: Tensile Strength @ Break ISO 527 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy R PLA | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 3800 MPap. 1: Flexural Modulus ISO 178 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy R PLA | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 81 MPap. 1: Flexural Strength ISO 178 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy R PLA | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 55 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °Calso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy R PLA | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 55-60 °Cp. 1: Glass Transition Temperature Tg DSC °Calso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy R PLA | specimen not stated, no standard stated | in the median |
| Melting temperature | 155-160 °Cp. 1: Melting Temperature Tm DSC °C | specimen not stated, DSCAs the sheet prints it: Tm DSC | |
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy R PLA4 valuesThe same values also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy R PLA. | |||
| Tensile yield strength orientation not stated | 60 MPap. 1: Tensile Strength @ Yield ASTM D882 MPa | ASTM D882 | not in the median: another value of this product is in it |
| Elongation at yield orientation not stated | 6 %p. 1: Elongation @ Yield ASTM D882 %also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy R PLA | ASTM D882 | listed under other properties |
| Izod impact strength | 16 J/mp. 1: Izod Impact Strength (Notched) @ 23°C ASTM D256 J/m | ASTM D256As the sheet prints it: 23°C ASTM D256 | not in the median: in J/m |
| Melting temperature | 145-160 °Cp. 1: Melting Temperature Tm ASTM D3418 °C | ASTM D3418 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 50–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °C for 4 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fiberlogy, rPLA filament.
Its 3 print profiles, in the documents' words
- Nozzle 210°C - 230°C; Bed 50°C - 70Fiberlogy, TECHNICAL DATA SHEET Fiberlogy R PLAp. 1: Recommended printing settings
- Nozzle 210°C - 230°C; Bed 50°C - 70°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy R PLAp. 1: Recommended printing settings
- Nozzle 210–230°C; Bed 60°C; Drying 50°C / 4 hoursFiberlogy, rPLA filamentp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber
Price
Not in the price sample.
Its 4 documents
What the maker says (1)
- Benefits
This innovative filament is made from 100% recycled raw materials, sourced exclusively from verified and carefully selected sources.
Fiberlogy, rPLA filamentp. 1
SUNLU APLAStrength XY, MPa51.3Strength Z, MPa—Modulus XY, GPa4.69Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C205–215Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU APLASUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, Product Information APLA14 values | |||
| Tensile modulus orientation not stated | 4690 MPap. 1: Young’s Modulus ASTM D638 1mm/min MPa | ASTM D638As the sheet prints it: 1mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 51.3 MPap. 1: Tensile Strength ASTM D638 50mm/min MPa | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 9.2 %p. 1: Elongation at break ASTM D638 50mm/min % | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2189 MPap. 1: Flexural Modulus ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 63 MPap. 1: Flexural Strength ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 39 J/mp. 1: IZOD Impact Notched ASTM D256 3.2mm, 23℃ J/m | ASTM D256As the sheet prints it: 3.2mm 23℃ ASTM D256 | not in the median: in J/m |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat Deflection (HDT) ASTM D648 0.45MPa ℃ | ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 58.9 ℃p. 1: Glass Transition(Tg) ASTM D7426 10℃/min ℃ | ASTM D7426 | in the median |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temp. ASTM D1525 5kg,50℃/h ℃ | ASTM D1525As the sheet prints it: 5kg ASTM D1525 | |
| Melting temperature | 163 ℃p. 1: Melting Point ASTM D7426 10℃/min ℃ | ASTM D7426 | |
| Decomposition temperature | 374 ℃p. 1: @5%Decomposition Temp. ASTM E2402 20℃/min ℃ | ASTM E2402As the sheet prints it: E2402 | |
| Density | 1.3 g/cm3p. 1: Density ASTM D792 23℃ g/cm3 | ASTM D792As the sheet prints it: 23℃ ASTM D792 | |
| Melt mass-flow rate | 9.5 g/10minp. 1: Melt Flow Rate ASTM D1238 190℃/2.16kg g/10min | ASTM D1238As the sheet prints it: 190℃/2.16kg ASTM D1238 | |
| Mould shrinkage orientation not stated | 0.1-0.3 %p. 1: Mold Shrinkage ASTM D955 23℃ % | ASTM D955As the sheet prints it: 23℃ ASTM D955 | |
Print settings
- Nozzle
- 205–215 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 205-215℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information APLAp. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Print Platform Temp.; p. 2: Room Temp.
- Nozzle 215-245℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information APLAp. 2: Recommended Printing Parameters: Zonal Temperature, 100-230mm/s
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
Low-stringing PLA
SUNLU, Product Information APLAp. 1 - Supports and removal
Support Material PVA
SUNLU, Product Information APLAp. 2
SUNLU PLA MatteStrength XY, MPa50.5Strength Z, MPa—Modulus XY, GPa4.78Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C205–215Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU PLA MatteSUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, Product Information PLA Matte14 values | |||
| Tensile modulus orientation not stated | 4780 MPap. 1: Young’s Modulus ASTM D638 1mm/min MPa | ASTM D638As the sheet prints it: 1mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 50.5 MPap. 1: Tensile Strength ASTM D638 50mm/min MPa | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 9.6 %p. 1: Elongation at break ASTM D638 50mm/min % | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2234 MPap. 1: Flexural Modulus ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 61 MPap. 1: Flexural Strength ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 40 J/mp. 1: IZOD Impact Notched ASTM D256 3.2mm, 23℃ J/m | ASTM D256As the sheet prints it: 3.2mm 23℃ ASTM D256 | not in the median: in J/m |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat Deflection (HDT) ASTM D648 0.45MPa ℃ | ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 58.8 ℃p. 1: Glass Transition(Tg) ASTM D7426 10℃/min ℃ | ASTM D7426 | in the median |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temp. ASTM D1525 5kg,50℃/h ℃ | ASTM D1525As the sheet prints it: 5kg ASTM D1525 | |
| Melting temperature | 162.6 ℃p. 1: Melting Point ASTM D7426 10℃/min ℃ | ASTM D7426 | |
| Decomposition temperature | 374 ℃p. 1: @5%Decomposition Temp. ASTM E2402 20℃/min ℃ | ASTM E2402As the sheet prints it: E2402 | |
| Density | 1.3 g/cm3p. 1: Density ASTM D792 23℃ g/cm3 | ASTM D792As the sheet prints it: 23℃ ASTM D792 | |
| Melt mass-flow rate | 10 g/10minp. 1: Melt Flow Rate ASTM D1238 190℃/2.16kg g/10min | ASTM D1238As the sheet prints it: 190℃/2.16kg ASTM D1238 | |
| Mould shrinkage orientation not stated | 0.1-0.3 %p. 1: Mold Shrinkage ASTM D955 23℃ % | ASTM D955As the sheet prints it: 23℃ ASTM D955 | |
Print settings
- Nozzle
- 205–215 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 205-215℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information PLA Mattep. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Print Platform Temp.; p. 2: Room Temp.
- Nozzle 215-245℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information PLA Mattep. 2: Recommended Printing Parameters: Zonal Temperature, 100-230mm/s
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Surface finish
PLA with matte texture and no plastic feel.
SUNLU, Product Information PLA Mattep. 1 - Supports and removal
Support Material PVA
SUNLU, Product Information PLA Mattep. 2
SUNLU PLA MetaStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa2Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C185–195Bed, °C50–60Chamber, °CnoneDrying, °C, h50
SUNLU PLA MetaSUNLU
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SUNLU, Product Information PLA Meta14 values | |||
| Tensile modulus orientation not stated | 2000 MPap. 1: Young’s Modulus ASTM D638 1mm/min MPa | ASTM D638As the sheet prints it: 1mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 50 MPap. 1: Tensile Strength ASTM D638 50mm/min MPa | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 17 %p. 1: Elongation at break ASTM D638 50mm/min % | ASTM D638As the sheet prints it: 50mm/min ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2139 MPap. 1: Flexural Modulus ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 72 MPap. 1: Flexural Strength ASTM D790 2mm/min MPa | ASTM D790As the sheet prints it: 2mm/min ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 48 J/mp. 1: IZOD Impact Notched ASTM D256 3.2mm, 23℃ J/m | ASTM D256As the sheet prints it: 3.2mm 23℃ ASTM D256 | not in the median: in J/m |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat Deflection (HDT) ASTM D648 0.45MPa ℃ | ASTM D648As the sheet prints it: 0.45MPa ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 63 ℃p. 1: Glass Transition(Tg) ASTM D7426 10℃/min ℃ | ASTM D7426 | in the median |
| Vicat softening temperature | 54 ℃p. 1: Vicat Softening Temp. ASTM D1525 5kg,50℃/h ℃ | ASTM D1525As the sheet prints it: 5kg ASTM D1525 | |
| Melting temperature | 164 ℃p. 1: Melting Point ASTM D7426 10℃/min ℃ | ASTM D7426 | |
| Decomposition temperature | 374 ℃p. 1: @5%Decomposition Temp. ASTM E2402 20℃/min ℃ | ASTM E2402As the sheet prints it: E2402 | |
| Density | 1.23 g/cm3p. 1: Density ASTM D792 23℃ g/cm3 | ASTM D792As the sheet prints it: 23℃ ASTM D792 | |
| Melt mass-flow rate | 6.5 g/10minp. 1: Melt Flow Rate ASTM D1238 190℃/2.16kg g/10min | ASTM D1238As the sheet prints it: 190℃/2.16kg ASTM D1238 | |
| Mould shrinkage orientation not stated | 0.1-0.3 %p. 1: Mold Shrinkage ASTM D955 23℃ % | ASTM D955As the sheet prints it: 23℃ ASTM D955 | |
Print settings
- Nozzle
- 185–195 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °Cown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 185- 195℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information PLA Metap. 2: Recommended printing settings; p. 2: Nozzle Print Temp.; p. 2: Print Platform Temp.; p. 2: Room Temp.
- Nozzle 195-225℃; Bed 50-60℃; Chamber Room Temperature; Drying 50℃SUNLU, Product Information PLA Metap. 2: Recommended Printing Parameters: Zonal Temperature, 100-200mm/s
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
High fluidity, fast printing at low temperature.
SUNLU, Product Information PLA Metap. 1 - Supports and removal
Support Material PVA
SUNLU, Product Information PLA Metap. 2
3D-Fuel Pro PLAStrength XY, MPa40Strength Z, MPa—Modulus XY, GPa2.87Charpy notched, kJ/m²—HDT 0.45, °C75HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C50–70Chamber, °CnoneDrying, °C, h508 h
3D-Fuel Pro PLA3D-Fuel
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3D-Fuel, Technical Data Sheet Pro PLA20 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 2865 MPap. 1: Tensile Modulus, kpsi (MPa) XY Axis | ASTM D638annealed at 110 °C for 0.333 hannealed at 110 C / 20 min unless otherwise noted (footnote 3) | in the median |
| Tensile modulus YX | 2447 MPap. 1: Tensile Modulus, kpsi (MPa) YX Axis | ASTM D638annealed at 110 °C for 0.333 hannealed at 110 C / 20 min unless otherwise noted (footnote 3) | not in the median: measured on a bar in another orientation |
| Tensile modulus ZX | 2477 MPap. 1: Tensile Modulus, kpsi (MPa) ZX Axis | ASTM D638annealed at 110 °C for 0.333 hannealed at 110 C / 20 min unless otherwise noted (footnote 3) | not in the median: measured on a bar in another orientation |
| Tensile strength (yield or break not stated) XY | 40 MPap. 1: Tensile Strength, psi (MPa) XY Axis | ASTM D638As the sheet prints it: D638annealed at 110 °C for 0.333 hannealed at 110°C / 20 min unless otherwise noted (footnote 3) | in the median |
| Tensile strength (yield or break not stated) ZX | 24 MPap. 1: Tensile Strength, psi (MPa) ZX Axis | ASTM D638As the sheet prints it: D638annealed at 110 °C for 0.333 hannealed at 110°C / 20 min unless otherwise noted (footnote 3) | not in the median: measured on a bar in another orientation |
| Flexural modulus XY | 2,414 MPap. 1: Flexural modulus, kpsi (MPa) XY Axis | ASTM D790As the sheet prints it: D790annealed at 110 °C for 0.333 hannealed at 110°C / 20 min unless otherwise noted (footnote 3) | in the median |
| Flexural modulus ZX | 2,352 MPap. 1: Flexural modulus, kpsi (MPa) ZX Axis | ASTM D790As the sheet prints it: D790annealed at 110 °C for 0.333 hannealed at 110°C / 20 min unless otherwise noted (footnote 3) | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 73 MPap. 1: Flexural strength, psi (MPa) XY Axis | ASTM D790As the sheet prints it: D790annealed at 110 °C for 0.333 hannealed at 110°C / 20 min unless otherwise noted (footnote 3) | in the median |
| Flexural strength ZX | 46 MPap. 1: Flexural strength, psi (MPa) ZX Axis | ASTM D790As the sheet prints it: D790annealed at 110 °C for 0.333 hannealed at 110°C / 20 min unless otherwise noted (footnote 3) | not in the median: measured on a bar in another orientation |
| Izod impact strength XY | 160 J/mp. 1: Notched Izod Impact [amorphous], ft-lb/in (J/m) XY Axis | ASTM D256as printed[amorphous] row, beside the sheet's [crystalline] row (footnote 3) | not in the median: in J/m |
| Izod impact strength XY | 233 J/mp. 1: Notched Izod Impact [crystalline], ft-lb/in (J/m) XY Axis | ASTM D256annealed at 110 °C for 0.333 hannealed at 110 C / 20 min ([crystalline]; footnote 3) | not in the median: in J/m |
| Izod impact strength YX | 2.26 ft-lb/inp. 1: Notched Izod Impact [amorphous], ft-lb/in (J/m) YX Axis | ASTM D256as printed[amorphous] row, beside the sheet's [crystalline] row (footnote 3) | not in the median: in J/m |
| Izod impact strength ZX | 109 J/mp. 1: Notched Izod Impact [amorphous], ft-lb/in (J/m) ZX Axis | ASTM D256as printed[amorphous] row, beside the sheet's [crystalline] row (footnote 3) | not in the median: in J/m |
| Izod impact strength YX | 200 J/mp. 1: Notched Izod Impact [crystalline], ft-lb/in (J/m) YX Axis | ASTM D256annealed at 110 °C for 0.333 hannealed at 110 C / 20 min ([crystalline]; footnote 3) | not in the median: in J/m |
| Izod impact strength ZX | 64 J/mp. 1: Notched Izod Impact [crystalline], ft-lb/in (J/m) ZX Axis | ASTM D256annealed at 110 °C for 0.333 hannealed at 110 C / 20 min ([crystalline]; footnote 3) | not in the median: in J/m |
| HDT at 0.45 MPa | 75-85 °Cp. 1: Heat Distortion Temperature (°C) 66 psi (0.45 MPa) | ASTM E2092As the sheet prints it: E2092; 0.45 MPaannealed at 110 °C for 0.333 hannealed at 110 C / 20 min unless otherwise noted | in the median |
| Glass transition temperature | 55-60 °Cp. 1: Glass Transition Temperature, °C | ASTM D3418As the sheet prints it: D3418 | in the median |
| Melting temperature | 165-180 °Cp. 1: Peak Melt Temperature, °C | specimen not stated, ASTM D3418As the sheet prints it: D3418 | |
| Density | 1.22 g/ccp. 1: Specific Gravity, g/cc | specimen not stated, ASTM D792As the sheet prints it: D792 | |
| Melt mass-flow rate | 9-15 g/10 minp. 1: MFR, g/10 min | ASTM D1238As the sheet prints it: D1238 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 50–70 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
- Annealing
- 110 °C for 0.333 hown data sheet
Its print profile, in the documents' words
- Nozzle 190-230°C; Bed None needed (or 50-70°C if applicable)3D-Fuel, Technical Data Sheet Pro PLAp. 1: Hot End Temperature, Bed Temperature
Price
Not in the price sample.
Its 2 documents
What the maker says (14)
- Benefits
3D-FuelTM Pro PLA (formerly Advanced PLA+/APLA+) Filament is a high heat and impact grade monofilament developed specifically for 3D Printing.
3D-Fuel, Technical Data Sheet Pro PLAp. 1 - Benefits
Pro PLA provide excellent 3D printing characteristics such as precise detail, good adhesion to build plates, less warping or curling, and low odor.
3D-Fuel, Technical Data Sheet Pro PLAp. 1 - Pitfalls and limitations
This grade is not certified for food contact applications.
3D-Fuel, Technical Data Sheet Pro PLAp. 1 - Warping and shrinkage
Uneven heating can lead to unexpected warpage and sub-optimal performance of the part
3D-Fuel, Technical Data Sheet Pro PLAp. 1 - Warping and shrinkage
Measure dimensions of the part prior to annealing and again after, to determine shrink.
3D-Fuel, Technical Data Sheet Pro PLAp. 1 - Printing advice
Ingeo 3D870 is formulated to crystallize when annealed post-printing.
3D-Fuel, Technical Data Sheet Pro PLAp. 1 - Printing advice
Crystallization is a simple and effective route to improve the thermal performance and further enhance the impact properties of Ingeo 3D870.
3D-Fuel, Technical Data Sheet Pro PLAp. 1 - Printing advice
Annealing can be carried out in an oven or some other medium of heat-transfer, such as a hot-water bath.
3D-Fuel, Technical Data Sheet Pro PLAp. 1 - Printing advice
Measure temperature at various locations in the oven to ensure absence of hot/cold spots.
3D-Fuel, Technical Data Sheet Pro PLAp. 1 - Printing advice
Typical time to anneal parts with wall -thickness of 0.125 in (~3.18 mm) is around 20 minutes, but this time is dependent on wall thickness.
3D-Fuel, Technical Data Sheet Pro PLAp. 1 - Printing advice
For large dimension parts, it is common to use support fixtures (e.g.-aluminum jigs) during the annealing process
3D-Fuel, Technical Data Sheet Pro PLAp. 1 - Printing advice
Once removed from the oven, let the part cool in ambient conditions.
3D-Fuel, Technical Data Sheet Pro PLAp. 1 - Printing advice
Minimize handling, as inside of the part will likely remain at elevated temperatures longer than the outside.
3D-Fuel, Technical Data Sheet Pro PLAp. 1 - Printing advice
If using a water-bath to anneal, the part may have to be at temperature for a slightly longer time to crystallize (since the water-bath cannot be at 110°C-120°C).
3D-Fuel, Technical Data Sheet Pro PLAp. 1
Chemicals and environment (1)
- Post-processing: described in words
Annealing Temperature 110-120°C
3D-Fuel, Technical Data Sheet Pro PLAp. 1: Annealing Temperature
3DXTECH ECOMAX PLAStrength XY, MPa56Strength Z, MPa—Modulus XY, GPa2.87Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C23–60Chamber, °CnoneDrying, °C, h454 h
3DXTECH ECOMAX PLA3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, ECOMAX PLA8 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 210°C Bed Temp: 23°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 2865 MPap. 1: Tensile Modulus | ISO 527 | in the median |
| Tensile break strength XY | 56 MPap. 1: Tensile Strength, Break | ISO 527 | in the median |
| Elongation at break XY | 8 %p. 1: Tensile Elongation, Break | ISO 527 | in the median |
| Flexural modulus XY | 3185 MPap. 1: Flexural Modulus | ISO 178 | in the median |
| Flexural strength XY | 115 MPap. 1: Flexural Strength | ISO 178 | in the median |
| HDT at 0.45 MPa | 80 °Cphysically implausiblep. 1: Deflection Temperature at 0.45 | ISO 75As the sheet prints it: ISO 75, 0.45 MPa (66 psi) | not in the median: physically implausible as published |
| Glass transition temperature | 55 °Cp. 1: Glass Transition Temperature (Tg) | DSC | in the median |
| Density | 1.24 g/ccp. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 23–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 45 °C for 4 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 3 print profiles, in the documents' words
- No temperature stated3DXTECH, ECOMAX PLARecommended printing settings
- Nozzle 190-220C; Bed 23-60C; Chamber Not required; Drying 45C for 4 hours3DXTECH, ECOMAX® PLAPrint Recommendations
- Nozzle 190-220C; Bed 23-60C; Chamber Not required; Drying 45C for 4 hours3DXTECH, ECOMAX® PLAp. 1: Benefits; p. 1: Extruder Temp; p. 1: Bed Temp; p. 1: Heated Chamber; p. 1: Nozzle Specs; p. 1: Drying Specs
Price
Not in the price sample.
Its 4 documents
What the maker says (1)
- Printing advice
Ideal for printing without a heated bed, no enclosure required
3DXTECH, ECOMAX® PLAp. 1
3DXTECH ECOMAX Tough PLAStrength XY, MPa53Strength Z, MPa—Modulus XY, GPa2.27Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C23–60Chamber, °CnoneDrying, °C, h654 h
3DXTECH ECOMAX Tough PLA3DXTECH
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, Technical Data Sheet: ECOMAX® Tough PLA 3D Printing Filament8 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 220°C Bed Temp: 23°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 2272 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | in the median |
| Tensile break strength XY | 53 MPap. 1: Tensile Strength, Break ISO 527 MPa | ISO 527 | in the median |
| Elongation at break XY | 65 %p. 1: Tensile Elongation, Break ISO 527 % | ISO 527 | in the median |
| Flexural modulus XY | 2875 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | in the median |
| Flexural strength XY | 98 MPap. 1: Flexural Strength ISO 178 MPa | ISO 178 | in the median |
| HDT at 0.45 MPa | 80 °Cphysically implausiblep. 1: Deflection Temperature at 0.45 ISO 75 °C | ISO 75As the sheet prints it: 0.45 MPa (66psi) ISO 75 | not in the median: physically implausible as published |
| Glass transition temperature | 55 °Cp. 1: Glass Transition Temperature DSC °C | DSCAs the sheet prints it: DSC Tg | in the median |
| Density | 1.22 g/ccp. 1: Density ISO 1183 g/cc | ISO 1183As the sheet prints it: 1183 g/cc ISO 1183 | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 23–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 65 °C for 4 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- No temperature stated3DXTECH, Technical Data Sheet: ECOMAX® Tough PLA 3D Printing Filamentp. 1: Printed Specimen Conditions, which are not printing guidance
- Nozzle 200-230C; Bed 23-60C; Chamber Not required; Drying 65C for 4 hours3DXTECH, ECOMAX® TOUGH PLAp. 1: Benefits; p. 1: Extruder Temp; p. 1: Bed Temp; p. 1: Heated Chamber; p. 1: Nozzle Specs; p. 1: Drying Specs
Price
Not in the price sample.
Its 3 documents
What the maker says (1)
- Benefits
Greatly improved impact resistance and ductility while still being among the easiest materials to 3D print with
3DXTECH, ECOMAX® TOUGH PLAp. 1
3DXTECH SimuBone Bone SimulationStrength XY, MPa65Strength Z, MPa—Modulus XY, GPa3.41Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–240Bed, °C23–60Chamber, °CnoneDrying, °C, h654 h
3DXTECH SimuBone Bone Simulation3DXTECH
Modified: undisclosed dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
3DXTECH, Technical Data Sheet: SimuBone™ Bone Simulation Filament8 valuesUnless a row says otherwise: printed specimenprint settingsPrinted Specimen Conditions Printer: Open Source FDM/FFF Nozzle: 0.4mm Layer Height: 0.25mm Infill: 100%, +/- 45° Extrusion Temp: 230°C Bed Temp: 23°C Specimen Orientation: XY Flat | |||
| Tensile modulus XY | 3410 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | not in the median: added filler or additive |
| Tensile break strength XY | 65 MPap. 1: Tensile Strength, Break ISO 527 MPa | ISO 527 | not in the median: added filler or additive |
| Elongation at break XY | 4 %p. 1: Tensile Elongation, Break ISO 527 % | ISO 527 | not in the median: added filler or additive |
| Flexural modulus XY | 3355 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | not in the median: added filler or additive |
| Flexural strength XY | 122 MPap. 1: Flexural Strength ISO 178 MPa | ISO 178 | not in the median: added filler or additive |
| HDT at 0.45 MPa | 89 °Cphysically implausiblep. 1: Deflection Temperature at 0.45 ISO 75 °C | ISO 75As the sheet prints it: 0.45 ISO 75 | not in the median: physically implausible as published |
| Glass transition temperature | 55 °Cp. 1: Glass Transition Temperature DSC °C (Tg) | DSCAs the sheet prints it: DSC Tg | not in the median: added filler or additive |
| Density | 1.34 g/ccp. 1: Density ISO 1183 g/cc | ISO 1183 | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 23–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 65 °C for 4 hown data sheet
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- No temperature stated3DXTECH, Technical Data Sheet: SimuBone™ Bone Simulation Filamentp. 1: Printed Specimen Conditions, which are not printing guidance
- Nozzle 220-240C; Bed 23-60C; Chamber Not required; Drying 65C for 4 hours3DXTECH, SIMUBONE®p. 1: Extruder Temp; p. 1: Bed Temp; p. 1: Heated Chamber; p. 1: Nozzle Specs; p. 1: Drying Specs
Price
Not in the price sample.
Its 3 documents
What the maker says (1)
- Good for
Simulates the look and feel of bone for pre-operative planning and training
3DXTECH, SIMUBONE®p. 1
colorFabb PLA-HPStrength XY, MPa53.4Strength Z, MPa—Modulus XY, GPa4.24Charpy notched, kJ/m²2.16HDT 0.45, °C135HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–220Bed, °C50–60Chamber, °CnoneDrying, °C, h508 h
colorFabb PLA-HPcolorFabb
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| colorFabb, Technical datasheet DRAFT PLA-HP10 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus orientation not stated | 3766.37 MPap. 1: Tensile modulus MPa | ISO 527 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Tensile strength (yield or break not stated) orientation not stated | 55.13 MPap. 1: Tensile strength MPa | ISO 527 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Tensile yield strength orientation not stated | 55.13 MPap. 1: Yield strength MPa | ISO 527 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Tensile break strength orientation not stated | 50.73 MPap. 1: Tensile stress at break MPa | ISO 527 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Elongation at break orientation not stated | 3.07 %p. 1: Tensile strain at break % | ISO 527 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Elongation at yield orientation not stated | 2.07 %p. 1: Yield strain % | ISO 527 | listed under other properties |
| Tensile strain at strength orientation not stated | 2.07 %p. 1: Tensile strain at tensile strength % | ISO 527 | listed under other properties |
| Charpy impact strength | 13.48 kJ/m2p. 1: Charpy unnotched impact strength kJ/m2 | ISO 179As the sheet prints it: ISO 179-1/1 | not in the median: unnotched |
| Charpy impact strength | 2.81 kJ/m2p. 1: Charpy notched impact strength kJ/m2 | ISO 179As the sheet prints it: ISO 179-1/1 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| HDT | 134 °Cp. 1: HDT °C | moulded bar (resin supplier's value), ISO 75 | not in the median: measured on a moulded bar |
colorFabb, Technical datasheet PLA HP7 valuesUnless a row says otherwise: printed specimenprint settingsThe specimens have been printed in XY plane, using 0,15 mm layer height, 100% infill, 0,4 mm nozzle, 210˚C nozzle temperature and 55˚C bed temperature. | |||
| Tensile modulus XY | 4240 MPap. 1: Youngs Modulus Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | in the median |
| Tensile strength (yield or break not stated) XY | 53.4 MPap. 1: Tensile Strength Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | in the median |
| Elongation at break XY | 3.5 %p. 1: Elongation at break Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | in the median |
| Flexural modulus XY | 3610 MPap. 1: Flexural Modulus Flexural, ISO 178 | ISO 178 | in the median |
| Flexural strength XY | 89.2 MPap. 1: Flexural Strength Flexural, ISO 178 | ISO 178 | in the median |
| Charpy impact strength XY | 2.16 kJ/m2p. 1: Charpy Impact Charpy Notch, ISO 179 | ISO 179notchedprint settings not stated | in the median |
| HDT at 0.45 MPa | 135 °Cp. 1: Heat Deflection Temp.* HDT-B, ISO 75 | ISO 75As the sheet prints it: HDT B ISO 75annealed at a temperature its sheet does not state for a time its sheet does not stateOptimal temperature resistance is obtained after annealing the sample | in the median |
Print settings
- Nozzle
- 200–220 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
- Annealing
- temperature not statedown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in colorFabb, Technical datasheet DRAFT PLA-HP.
Its 2 print profiles, in the documents' words
- Nozzle 200 - 220°C; Bed 50°CcolorFabb, Technical datasheet DRAFT PLA-HPp. 1: Recommended printing settings; p. 1: Layerheight (for 0.4mm nozzle)
- Nozzle 200-220 °C; Bed 50-60 °CcolorFabb, Technical datasheet PLA HPp. 2: Recommended printing settings; p. 2: Bed / surface modification
Price
Not in the price sample.
Its 3 documents
What the maker says (1)
- Benefits
This easy-to-print PLA has an improved Heat Deflection Temperature of roughly 134°C, without having to anneal the material.
colorFabb, Technical datasheet PLA HPp. 1
Creality Hyper-PLA+Strength XY, MPa53Strength Z, MPa—Modulus XY, GPa1.15Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C60Chamber, °C0–50Drying, °C, h508 h
Creality Hyper-PLA+Creality
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Creality, Hyper-PLA+ Filament Technical Data Sheet10 values | |||
| Tensile modulus XY | 1146.06(Mpa)p. 1: Tensile modulus (X-Y) | ISO 527, GB/T 1040 | in the median |
| Tensile strength (yield or break not stated) XY | 52.99 MPap. 1: Tensile strength (X-Y) ISO 527, GB/T 1040 | ISO 527, GB/T 1040 | in the median |
| Elongation at break XY | 6.3 %p. 1: Elongation at break(X-Y) ISO 527, GB/T 1040 | ISO 527, GB/T 1040 | in the median |
| Flexural modulus XY | 2490.17 MPap. 1: Bending modulus(X-Y) ISO 179, GB/T 1043 | ISO 179, GB/T 1043 | in the median |
| Flexural strength XY | 92.38 MPap. 1: Bending strength(X-Y) ISO 178, GB/T 9341 | ISO 178, GB/T 9341 | in the median |
| Charpy impact strength Z | 8.83 kJ/m2p. 1: Charpy impact strength(Z) ISO 179, GB/T 1043 | ISO 179, GB/T 1043 | not in the median: notch not stated |
| Glass transition temperature | 62 °Cp. 1: Glass transition temperature DSC, 10 °C/min | DSC | in the median |
| Vicat softening temperature | 62.3 ± 0.5 °Cp. 1: Vicat Softening temperature | no standard stated | |
| Density | 1.24 ± 0.1 g/cm3p. 1: Density | no standard stated | |
| Melt mass-flow rate | 3-5 g/10 minp. 1: Melt index 190°C, 2.16 kg | no standard namedAs the sheet prints it: 190°C 2.16 kg | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- 0–50 °Cown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-230℃; Bed 60℃; Chamber 0-50℃Creality, Hyper-PLA+ Filament Technical Data Sheetp. 1: Recommended printing settings; p. 1: Hot Bed Temperature
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
It is compatible with high and low speed printing, supports printing speeds up to 600mm/s, and has high mechanical properties and tensile strength.
Creality, Hyper-PLA+ Filament Technical Data Sheetp. 1 - Warping and shrinkage
Compared with ordinary ABS filaments, Hyper PLA has a low shrinkage rate, no edge warping during printing, and printing is successful.
Creality, Hyper-PLA+ Filament Technical Data Sheetp. 1
Markforged Precise PLAStrength XY, MPa31Strength Z, MPa—Modulus XY, GPa2.3Charpy notched, kJ/m²—HDT 0.45, °C52HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C30–65Chamber, °CnoneDrying, °C, h508 h
Markforged Precise PLAMarkforged
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Markforged, MATERIAL DATASHEET Precise PLA9 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus orientation not stated | 2.3 GPap. 1: Tensile Modulus | ASTM D638As the sheet prints it: D638 | in the median |
| Tensile yield strength orientation not stated | 31 MPap. 1: Tensile Stress at Yield | ASTM D638As the sheet prints it: D638 | in the median |
| Tensile break strength orientation not stated | 18 MPap. 1: Tensile Stress at Break | ASTM D638As the sheet prints it: D638 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 27 %p. 1: Tensile Strain at Break | ASTM D638As the sheet prints it: D638 | in the median |
| Flexural modulus orientation not stated | 2.3 GPap. 1: Flexural Modulus (GPa) | ASTM D790As the sheet prints it: D790 | in the median |
| Flexural strength orientation not stated | 43 MPap. 1: Flexural Strength (MPa) | ASTM D790As the sheet prints it: D790 | in the median |
| Izod impact strength | 62 J/mp. 1: Izod Impact - notched | ASTM D256As the sheet prints it: D256-10 | not in the median: in J/m |
| HDT at 0.45 MPa | 52 °Cp. 1: Heat Deflection Temperature (°C) | ASTM D648As the sheet prints it: D648 B; 0.45 MPa | in the median |
| Density | 1.3 g/cm³p. 1: Density (g/cm³) | no standard stated | |
Print settings
- Nozzle
- 190–230 °CBambu Lab Filament Guide
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
What the maker says (4)
- Good for
PLA (Polylactic Acid) is a cost-effective option for non-functional prototyping.
Markforged, MATERIAL DATASHEET Precise PLAp. 1 - Good for
Markforged Precise PLA is ideal for design iterations, fit checks, concept models, and visual-only parts that are not mechanically demanding.
Markforged, MATERIAL DATASHEET Precise PLAp. 1 - Good for
Precise PLA is available in eight different colors to create color-coded prototypes, tool holders, and keep out zones.
Markforged, MATERIAL DATASHEET Precise PLAp. 1 - Pitfalls and limitations
Continuous Fiber is not compatible with Markforged Precise PLA.
Markforged, MATERIAL DATASHEET Precise PLAp. 1
colorFabb PLA ChameleonStrength XY, MPa70.9Strength Z, MPa—Modulus XY, GPa3.29Charpy notched, kJ/m²3.97HDT 0.45, °C59HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C50–60Chamber, °CnoneDrying, °C, h508 h
colorFabb PLA ChameleoncolorFabb
Data sheet shared with colorFabb PLA Vertigo: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| colorFabb, Technical datasheet PLA Chameleon19 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 3285,79 MPap. 1: Tensile modulus MPa | ISO 527print settingsXY plane, 0.15mm layerheight, 100% infill, 0.4mm nozzle, 210 °C nozzle temperature and 55 °C bed temperature | in the median |
| Tensile modulus orientation not stated | 3400 MPap. 2: Tensile modulus MPa | moulded bar (resin supplier's value), ISO 527 | not in the median: measured on a moulded bar |
| Tensile strength (yield or break not stated) XY | 70,72 MPap. 1: Tensile strength MPa | ISO 527print settingsXY plane, 0.15mm layerheight, 100% infill, 0.4mm nozzle, 210 °C nozzle temperature and 55 °C bed temperature | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) orientation not stated | 45 MPap. 2: Tensile strength MPa | moulded bar (resin supplier's value), ISO 527 | not in the median: measured on a moulded bar |
| Tensile yield strength XY | 70,91 MPap. 1: Yield strength MPa | ISO 527print settingsXY plane, 0.15mm layerheight, 100% infill, 0.4mm nozzle, 210 °C nozzle temperature and 55 °C bed temperature | in the median |
| Tensile break strength XY | 65,36 MPap. 1: Tensile stress at break MPa | ISO 527print settingsXY plane, 0.15mm layerheight, 100% infill, 0.4mm nozzle, 210 °C nozzle temperature and 55 °C bed temperature | not in the median: another value of this product is in it |
| Elongation at break XY | 3,49 %p. 1: Tensile strain at break % | ISO 527print settingsXY plane, 0.15mm layerheight, 100% infill, 0.4mm nozzle, 210 °C nozzle temperature and 55 °C bed temperature | in the median |
| Elongation at break orientation not stated | 6 %p. 2: Tensile strain at break % | moulded bar (resin supplier's value), ISO 527 | not in the median: measured on a moulded bar |
| Elongation at yield XY | 2,52 %p. 1: Yield strain % | ISO 527print settingsXY plane, 0.15mm layerheight, 100% infill, 0.4mm nozzle, 210 °C nozzle temperature and 55 °C bed temperature | listed under other properties |
| Tensile strain at strength XY | 2,53 %p. 1: Tensile strain at tensile strength % | ISO 527print settingsXY plane, 0.15mm layerheight, 100% infill, 0.4mm nozzle, 210 °C nozzle temperature and 55 °C bed temperature | listed under other properties |
| Flexural modulus XY | 2381,63 MPap. 1: Flexural modulus MPa | ISO 178print settingsXY plane, 0.15mm layerheight, 100% infill, 0.4mm nozzle, 210 °C nozzle temperature and 55 °C bed temperature | in the median |
| Flexural strength XY | 96,65 MPap. 1: Flexural strength MPa | ISO 178print settingsXY plane, 0.15mm layerheight, 100% infill, 0.4mm nozzle, 210 °C nozzle temperature and 55 °C bed temperature | in the median |
| Flexural stress at conventional deflection XY | 80,13 MPap. 1: Flexural strain at standard deflection | ISO 178 | listed under other properties |
| Charpy impact strength | 23,25 kJ/m2p. 1: Charpy unnotched impact strength kJ/m2 | ISO 179As the sheet prints it: ISO 179-1/1 | not in the median: unnotched |
| Charpy impact strength | 3,97 kJ/m2p. 1: Charpy notched impact strength kJ/m2 | ISO 179As the sheet prints it: ISO 179-1/1 | in the median |
| Charpy impact strength | 7 kJ/m2p. 2: Charpy notched impact strength kJ/m2 | moulded bar (resin supplier's value), ISO 179As the sheet prints it: ISO 179-1/1 | not in the median: measured on a moulded bar |
| HDT | 59,03 °Cp. 1: Heat Deflection Temperature (HDT) °C | ISO 75 | not in the median: set apart (never used to pass), no stated test load |
| Glass transition temperature | 55-60 °Cp. 2: Glass transition temperature °C | moulded bar (resin supplier's value), no standard stated | not in the median: the resin supplier's value, not a printed part |
| Density | 1,2-1,3 g/cm3p. 2: Density g/cm3 | moulded bar (resin supplier's value), ISO 1183 | |
| colorFabb, Technical datasheet PLA Vertigo5 values | |||
| Tensile modulus | 3400 MPap. 2: Tensile modulus | ISO 527 | not in the median: measured on a moulded bar |
| Tensile strength (yield or break not stated) | 45 MPap. 2: Tensile strength | ISO 527 | not in the median: measured on a moulded bar |
| Elongation at break | 6 %p. 2: Tensile strain at break | ISO 527 | not in the median: measured on a moulded bar |
| Charpy impact strength XY | 23,25 kJ/m2p. 1: Charpy unnotched impact strength | ISO 179As the sheet prints it: ISO 179-1/1 eU | not in the median: unnotched |
| Charpy impact strength XY | 3,97 kJ/m2p. 1: Charpy notched impact strength | ISO 179As the sheet prints it: ISO 179-1/1 eU | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 195 – 220 °C; Bed 50 – 60 °CcolorFabb, Technical datasheet PLA Chameleonp. 2: Recommended printing settings; p. 2: Bed surface / modification
Price
Not in the price sample.
Its 3 documents
What the maker says (3)
- Good for
Perfect for creating unique figurines, ornaments and even jewelry with a cosmic touch.
colorFabb, Technical datasheet PLA Chameleonp. 1 - Surface finish
Chameleon filaments alternate between two colors, depending on the angle at which you look at your print.
colorFabb, Technical datasheet PLA Chameleonp. 1 - Surface finish
The filament is PLA based and easy to print with and produces a smooth finish.
colorFabb, Technical datasheet PLA Chameleonp. 1
colorFabb PLA VertigoStrength XY, MPa70.9Strength Z, MPa—Modulus XY, GPa3.29Charpy notched, kJ/m²3.97HDT 0.45, °C59HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C50–60Chamber, °CnoneDrying, °C, h508 h
colorFabb PLA VertigocolorFabb
Data sheet shared with colorFabb PLA Chameleon: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 195 – 220 ºC; Bed 50 – 60 ºCcolorFabb, Technical datasheet PLA Vertigop. 2: Nozzle temperature, Bed temperature; p. 2: Bed surface / modification
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Good for
Perfect for creating unique jewelry, figurines and ornaments.
colorFabb, Technical datasheet PLA Vertigop. 1 - Benefits
PLA vertigo is easy to print with.
colorFabb, Technical datasheet PLA Vertigop. 1 - Surface finish
Vertigo filaments have a deep, rich color with a dash of glitter that gives them a unique look.
colorFabb, Technical datasheet PLA Vertigop. 1 - Surface finish
The Vertigo effect is perfect for hiding the layering of the 3D print and produces a smooth-looking finish.
colorFabb, Technical datasheet PLA Vertigop. 1
Prusa Research Prusament PLA by Prusa PolymersStrength XY, MPa51Strength Z, MPa—Modulus XY, GPa2.3Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–220Bed, °C40–60Chamber, °CnoneDrying, °C, h508 h
Prusa Research Prusament PLA by Prusa PolymersPrusa Research
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Prusa Research, Technical datasheet Prusament PLA by Prusa Polymers20 values | |||
| Tensile modulus XY | 2.3 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | in the median |
| Tensile modulus XZ | 2.4 ± 0.1 GPap. 2: Tensile Modulus [GPa] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Tensile yield strength XY | 51 ± 3 MPap. 2: Tensile Yield Strength [MPa] (Horizontal (source label)) | ISO 527As the sheet prints it: ISO 527-1 | in the median |
| Tensile yield strength orientation not stated | 57 ± 1 MPap. 2: Tensile Yield Strength for Filament [MPa] | ISO 527 | not in the median: measured on a filament strand |
| Tensile yield strength XZ | 59 ± 2 MPap. 2: Tensile Yield Strength [MPa] (Vertical XZ (source label)) | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a bar in another orientation |
| Elongation at yield XZ | 3.2 ± 1.0 %p. 2: Elongation at Yield Point [%] | ISO 527As the sheet prints it: ISO 527-1 | listed under other properties |
| Flexural modulus XY | 3.1 ± 0.1 GPap. 2: Flexural Modulus (Horizontal (source label)) | ISO 178 | in the median |
| Flexural modulus XZ | 3.2 ± 0.1 GPap. 2: Flexural Modulus (Vertical XZ (source label)) | ISO 178 | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 83 ± 6 MPap. 2: Flexural Strength (Horizontal (source label)) | ISO 178 | in the median |
| Flexural strength XZ | 99 ± 1 MPap. 2: Flexural Strength (Vertical XZ (source label)) | ISO 178 | not in the median: measured on a bar in another orientation |
| Charpy impact strength XY | 13 ± 1 kJ/m²p. 2: Impact Strength Charpy (Horizontal (source label)) | ISO 179As the sheet prints it: ISO 179-1; blow=edgewise | not in the median: unnotched |
| Charpy impact strength XZ | 14 ± 1 kJ/m²p. 2: Impact Strength Charpy (Vertical XZ (source label)) | ISO 179As the sheet prints it: ISO 179-1; blow=edgewise | not in the median: unnotched |
| Hardness | 81 Shore Dp. 2: Hardness – Shore D | no standard namedAs the sheet prints it: Prusa Polymers | in the median |
| Interlayer adhesion strength orientation not stated | 17 ± 3 MPap. 2: Interlayer Adhesion [MPa] | no standard namedAs the sheet prints it: Prusa Polymers | |
| HDT at 0.45 MPa | 55 °Cp. 2: Heat Deflection Temperature (0.45 MPa) [°C] | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm³p. 2: Density | ISO 1183 | |
| Water absorption | 0.13 %p. 2: Moisture Absorption in 24 hours [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; time=24 hours; humidity=22 % | |
| Water absorption | 0.19 %p. 2: Moisture Absorption in 7 days [%](2) | no standard namedAs the sheet prints it: Prusa Polymers; time=7 days; humidity=22 % | |
| Melt mass-flow rate | 9–11 g/10 minp. 2: MFR [g/10 min](1) | ISO 1133As the sheet prints it: ISO 1133; 2.16 kg | |
| Melt volume-flow rate | 8–10 cm³/10 minp. 2: MVR | ISO 1133As the sheet prints it: ISO 1133; 2.16 kg | |
Print settings
- Nozzle
- 200–220 °Cown data sheet
- Bed
- 40–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 210 ± 10; Bed 40–60Prusa Research, Technical datasheet Prusament PLA by Prusa Polymersp. 1: Nozzle Temperature [°C], Heatbed Temperature [°C]; p. 1: Bed Type
- Bed 40–60 °C Heated Bed OptionalPrusa Research, Prusament PLAp. 1: Bed Temperature; p. 1: Enclosure; p. 1: Print Surface
Price
Not in the price sample.
Its 3 documents
What the maker says (36)
- Pitfalls and limitations
The combination of being both low UV resistance and having low-temperature resistance means that it’s not ideal for outdoor use.
Prusa Research, Prusament PLAp. 1 - Benefits
It’s a very strong and easy to print material.
Prusa Research, Prusament PLAp. 1 - Good for
The perfect choice for printing large objects thanks to its low thermal expansion (with little to no warping) and for printing tiny parts because of its low melting temperature.
Prusa Research, Prusament PLAp. 1 - Benefits
Hard and tough
Prusa Research, Prusament PLAp. 1 - Benefits
Easy to print
Prusa Research, Prusament PLAp. 1 - Good for
Can print tiny parts
Prusa Research, Prusament PLAp. 1 - Good for
Can print huge objects
Prusa Research, Prusament PLAp. 1 - Pitfalls and limitations
Low temperature resistance
Prusa Research, Prusament PLAp. 1 - Pitfalls and limitations
Difficult post-processing
Prusa Research, Prusament PLAp. 1 - Good for
Action figures often include tons of small features. Printing them with PLA is easy at almost any scale
Prusa Research, Prusament PLAp. 1 - Good for
PLA is perfect for printing small and detailed objects, such as jewelry.
Prusa Research, Prusament PLAp. 1 - Precision and tolerance
Whether it’s a necklace or an earring, you can expect clean edges and no stringing, especially if coupled with a smaller nozzle.
Prusa Research, Prusament PLAp. 1 - Good for
Thanks to its minimal thermal expansion, PLA is a great choice for large prints.
Prusa Research, Prusament PLAp. 1 - Warping and shrinkage
No warping, no layer separation.
Prusa Research, Prusament PLAp. 1 - Benefits
Unlike so-called thermoset materials, PLA can be heated past its melting point multiple times with very little degradation.
Prusa Research, Prusament PLAp. 1 - Pitfalls and limitations
It’s a hard material, but that also means it’s somewhat brittle, and once it breaks, it likes to shatter.
Prusa Research, Prusament PLAp. 1 - Good for
The best use of PLA is for printing concept models, prototypes, miniatures, jewelry, low-wear toys, etc.
Prusa Research, Prusament PLAp. 1 - Pitfalls and limitations
The low print temperature also means low-temperature resistance.
Prusa Research, Prusament PLAp. 1 - Pitfalls and limitations
Parts start to lose mechanical strength at temperatures over 60 °C.
Prusa Research, Prusament PLAp. 1 - Pitfalls and limitations
The combination of being both low UV resistance and having low-temperature resistance means that it’s not ideal for outdoor use .
Prusa Research, Prusament PLAp. 1 - Printing advice
Use glue to connect multiple parts together.
Prusa Research, Prusament PLAp. 1 - Pitfalls and limitations
Even though PLA is the material on its own is food safe, we do not suggest to repeatedly drink or eat from your 3D prints.
Prusa Research, Prusament PLAp. 1 - Pitfalls and limitations
It’s because of the small fractures in the print surface, which means bacteria can build up in there over time.
Prusa Research, Prusament PLAp. 1 - Printing advice
You can prevent this by applying a food-safe coating.
Prusa Research, Prusament PLAp. 1 - Printing advice
To achieve the best adhesion of the print surface, it is important to keep it clean.
Prusa Research, Prusament PLAp. 1 - Printing advice
Cleaning the surface is simple: the best option is Isopropyl alcohol ( available in drugstores) which works best not just for PLA, but other materials as well.
Prusa Research, Prusament PLAp. 1 - Printing advice
Pour a small amount of IPA on an unscented paper towel and wipe the print surface.
Prusa Research, Prusament PLAp. 1 - Printing advice
The bed should be cleaned when it’s cold for the best results but it can also be cleaned when already preheated for PLA, just be careful not to touch the bed surface or the nozzle.
Prusa Research, Prusament PLAp. 1 - Printing advice
But keep in mind that when cleaning at higher temperatures, the alcohol will evaporate before it can clean anything.
Prusa Research, Prusament PLAp. 1 - Printing advice
Alternatively, you can clean the bed with warm water and a few drops of dish soap on a paper towel.
Prusa Research, Prusament PLAp. 1 - Printing advice
Denatured alcohol is also another option.
Prusa Research, Prusament PLAp. 1 - Printing advice
When post-processing PLA, it’s better to use wet sanding.
Prusa Research, Prusament PLAp. 1 - Printing advice
Without water you’ll quickly start heating the plastic by friction, it will melt locally and make it hard to keep sanding.
Prusa Research, Prusament PLAp. 1 - Printing advice
Feel free to cool PLA during printing as much as possible.
Prusa Research, Prusament PLAp. 1 - Printing advice
With good enough cooling you can print extreme overhangs and bridge between far away surfaces.
Prusa Research, Prusament PLAp. 1 - Printing advice
If you’re in need of a durable part, increase the number of perimeters rather than increasing the infill percentage as the majority of a 3D print strength comes from its outer shell.
Prusa Research, Prusament PLAp. 1
Spectrum PLA ToughStrength XY, MPa53.2Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg50Nozzle, °C190–230Bed, °C0–45Chamber, °CnoneDrying, °C, h508 h
Spectrum PLA ToughSpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET PLA Tough11 values | |||
| Tensile modulus XY | 432,8 MPaphysically implausiblehorizontal XY footnote | ASTM D638As the sheet prints it: D638print settings3D printed horizontal (XY axis), at 100% infill | not in the median: physically implausible as published |
| Tensile strength (yield or break not stated) XY | 53,2 MPap. 1: Tensile Strength | ASTM D638As the sheet prints it: D638 | in the median |
| Tensile break strength XY | 43,5 MPap. 1: Force at Break | ASTM D638As the sheet prints it: D638 | not in the median: another value of this product is in it |
| Elongation at break XY | 15,00 %p. 1: Elongation at Break | ASTM D638As the sheet prints it: D638print settings3D printed horizontal (XY axis), at 100% infill | in the median |
| Tensile strain at strength XY | 14,50 %p. 1: Elongation at max. force | ASTM D638As the sheet prints it: D638 | listed under other properties |
| Flexural modulus XY | 2493 MPap. 1: Flexural modulus | ISO 178print settings3D printed horizontal (XY axis), at 100% infill | in the median |
| Flexural strength XY | 71,13 MPap. 1: Maximum bending stress | ISO 178 | in the median |
| HDT | 55 °Cp. 1: Heat Distortion Temperature | ASTM E2092As the sheet prints it: E 2092 | not in the median: set apart (never used to pass), no stated test load |
| Glass transition temperature | 55-60 °Cp. 1: Glass Transition Temperature | ASTM D3418As the sheet prints it: D3418 | in the median |
| Density | 1.20 g/cm3p. 1: Specific Gravity | ASTM D792As the sheet prints it: D 792 | |
| Melt mass-flow rate | 9,42 g/10minp. 1: MFR (210°C, 2.16kg) | ASTM D1238As the sheet prints it: 210°C 2.16kg D 1238 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 0–45 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 190-230°C; Bed 0-45°CSpectrum, TECHNICAL DATA SHEET PLA Toughp. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box; p. 1: settings footnote
- Nozzle 190-230 °C; Bed 0-45 °C; Chamber not necessarySpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Nozzle temp. [°C]; p. 4: Bed temp. [°C]; p. 4: Closed chamber for printing; p. 4: Dry box recommended; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
Price
50 CAD/kgits one regular price in the sample
1 listing
- 3D Printing Canada: 50 CAD/kgPolar White - Spectrum PLA Tough Filament - 1.75mm, 1kg (SKU 67bbb470c92d5)in its price; seen 30 Sep 2026
Its 4 documents
What the maker says (8)
- Benefits
It is a perfect solution for printing functional components with mechanical properties close to those of ABS, while retaining the simple printing and low shrinkage of PLA.
Spectrum, TECHNICAL DATA SHEET PLA Toughp. 1 - Benefits
higher impact resistance of printed items as compared to their equivalents manufactured of ABS
Spectrum, TECHNICAL DATA SHEET PLA Toughp. 1 - Benefits
more elastic than standard PLA
Spectrum, TECHNICAL DATA SHEET PLA Toughp. 1 - Surface finish
more matte surfaces as compared to the unmodified PLA
Spectrum, TECHNICAL DATA SHEET PLA Toughp. 1 - Adhesion between layers
improved layer adhesion
Spectrum, TECHNICAL DATA SHEET PLA Toughp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET PLA Toughp. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET PLA Toughp. 1 - Benefits
Tough like ABS, easy to print like PLA
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20
Spectrum PLA MattStrength XY, MPa30Strength Z, MPa—Modulus XY, GPa2.75Charpy notched, kJ/m²3.5HDT 0.45, °C116HDT 1.8, °C66Price, CAD/kg45Nozzle, °C190–230Bed, °C0–45Chamber, °CnoneDrying, °C, h508 h
Spectrum PLA MattSpectrum
Sold as toughened or impact-modified: "improved strength properties in terms of impact, elasticity and durability compared to elements made of classic PLA" (Spectrum, TECHNICAL DATA SHEET PLA Matt, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET PLA Matt9 values | |||
| Tensile modulus orientation not stated | 2750 MPap. 1: Elastic modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 30 MPap. 1: Tensile strength at break (3D printing) * | ISO 527 | in the median |
| Elongation at break orientation not stated | 2.9 %p. 1: Tensile elongation at break (3D printing) * | ISO 527 | in the median |
| Charpy impact strength orientation not stated | 14 kJ/m2p. 1: Charpy impact strength (sample 80x10x4 mm) Unnotched 3D printing | ISO 179As the sheet prints it: ISO 179-1eU; sample=80x10x4 mm | not in the median: unnotched |
| Charpy impact strength orientation not stated | 3.5 kJ/m2p. 1: Charpy impact strength (sample 80x10x4 mm) Notched 3D printing | ISO 179As the sheet prints it: ISO 179-1eA; sample=80x10x4 mm | not in the median: sold as toughened, set apart |
| HDT at 0.45 MPa | 116 °Ctranscription correctedp. 1: Heat Deflection Temperature 0.45 MN/m2, annealed (4h @ 90°C) | ISO 75As the sheet prints it: 0.45 MN/m2 annealed 4h 90°C ISO 75annealed at 90 °C for 4 hannealed (4h @ 90°C) | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 66 °Ctranscription correctedp. 1: Heat Deflection Temperature 1.81 MN/m2, annealed (4h @ 90°C) | ISO 75As the sheet prints it: 1.81 MN/m2 annealed 4h 90°C ISO 75annealed at 90 °C for 4 hannealed (4h @ 90°C) | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 85 °Cp. 1: VICAT softening point ** | ISO 306annealed at 90 °C for 4 hannealed (4 h @ 90 °C) | |
| Density | 1.24 g/cm3p. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 0–45 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
- Annealing
- 90 °C for 4 hown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 190-230°C; Bed 0-45°CSpectrum, TECHNICAL DATA SHEET PLA Mattp. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box
- Nozzle 190-230 °C; Bed 0-45 °C; Chamber not necessarySpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Nozzle temp. [°C]; p. 4: Bed temp. [°C]; p. 4: Closed chamber for printing; p. 4: Dry box recommended; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
Price
45 CAD/kgits one regular price in the sample
1 listing
- 3D Printing Canada: 45 CAD/kgNavy Blue - Spectrum PLA MATT Filament - 1.75mm, 1kg (SKU 67bbb48e69733)in its price; seen 30 Sep 2026
Its 4 documents
What the maker says (10)
- Benefits
improved strength properties in terms of impact, elasticity and durability compared to elements made of classic PLA
Spectrum, TECHNICAL DATA SHEET PLA Mattp. 1 - Surface finish
high quality matte side surface with hardly visible layers
Spectrum, TECHNICAL DATA SHEET PLA Mattp. 1 - Surface finish
Spectrum PLA MATT is a PLA-based material with a chemical composition modified so that it is possible to obtain matte surfaces of printed object.
Spectrum, TECHNICAL DATA SHEET PLA Mattp. 1 - Surface finish
The matte finish of printed items considerably improves their aesthetic properties and also minimises the visibility of layers on the side surfaces of printed items.
Spectrum, TECHNICAL DATA SHEET PLA Mattp. 1 - Adhesion between layers
increased adhesion between the layers
Spectrum, TECHNICAL DATA SHEET PLA Mattp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET PLA Mattp. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET PLA Mattp. 1 - Benefits
Matte surface, UV stabilization, improved strength properties
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20 - Surface finish
Matte surface
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20 - Benefits
UV stabilization, improved strength properties
Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 3
Chemicals and environment (1)
- UV and outdoor: described in words
UV stabilization
UVSpectrum, TECHNICAL DATA SHEET PLA Mattp. 1
Fiberlogy HS PLA CLEARStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa3.5Charpy notched, kJ/m²< 5HDT 0.45, °C60HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–250Bed, °C60Chamber, °CnoneDrying, °C, h504 h
Fiberlogy HS PLA CLEARFiberlogy
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy HS PLA CLEAR5 valuesThe same values also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy HS PLA CLEAR.Unless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Tensile modulus orientation not stated | 3500 MPap. 1: Tensile Modulus ISO 527 MPaalso in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy HS PLA CLEAR | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 50 MPap. 1: Tensile Strength @ Break ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 5 %p. 1: Elongation @ Break ISO 527 %also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy HS PLA CLEAR | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 5 kJ/m2p. 1: Charpy Impact Strength (Notched) @ 23°C ISO 179 kJ/m2also in Fiberlogy, TECHNICAL DATA SHEET Fiberlogy HS PLA CLEAR | ISO 179As the sheet prints it: 23°C ISO 179 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 60 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °C | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy HS PLA CLEAR2 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 50 MPap. 1: Tensile Strength ISO 527 MPa | ISO 527 | not in the median: another value of this product is in it |
| Glass transition temperature | 60 °Cp. 1: Glass transition temperature DSC °C | no standard stated | in the median |
| Fiberlogy, HS PLA Clear Filament2 valuesUnless a row says otherwise: specimen not stated | |||
| Charpy impact strength orientation not stated | <5 kJ/m²p. 1: Charpy impact strength (notched) @ 23°C | ISO 179tested at 23 °C | not in the median: another value of this product is in it |
| Density | 1.24 g/cm³p. 1: Density | no standard stated | |
Print settings
- Nozzle
- 220–250 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °C for 4 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 3 print profiles, in the documents' words
- Nozzle 220°C - 250°C; Bed 60°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy HS PLA CLEARp. 1: Recommended printing settings
- Nozzle 220°C - 250°C; Bed 60°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy HS PLA CLEARp. 1: Recommended printing settings
- Nozzle 220–250°C; Bed 60°C; Drying 50°C / 4 hoursFiberlogy, HS PLA Clear Filamentp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber
Price
Not in the price sample.
Its 4 documents
What the maker says (1)
- Surface finish
HS PLA Clear allows you to create transparent, aesthetically pleasing models with a uniform finish.
Fiberlogy, HS PLA Clear Filamentp. 1
Spectrum Huracan PLAStrength XY, MPa42Strength Z, MPa—Modulus XY, GPa2.95Charpy notched, kJ/m²—HDT 0.45, °C80HDT 1.8, °C—Price, CAD/kg40Nozzle, °C190–230Bed, °C0–45Chamber, °CnoneDrying, °C, h508 h
Spectrum Huracan PLASpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Spectrum, TECHNICAL DATA SHEET Huracan PLA9 valuesUnless a row says otherwise: specimen not statedannealed at a temperature its sheet does not state for a time its sheet does not stateannealed | |||
| Tensile modulus orientation not stated | 2950 MPap. 1: Tensile Modulus | ASTM D638As the sheet prints it: D 638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 42 MPap. 1: Tensile Strength | ASTM D638As the sheet prints it: D 638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2500 MPap. 1: Flexural Modulus | ASTM D790As the sheet prints it: D 790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 75 MPap. 1: Flexural Strength | ASTM D790As the sheet prints it: D 790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 240 J/mp. 1: Notched Izod Impact [crystaline] | ASTM D256As the sheet prints it: D 256 | not in the median: in J/m |
| HDT | 80 °Cp. 1: Heat Distortion Temperature* | ASTM E2092As the sheet prints it: E 2092 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 55-60 °Cp. 1: Glass Transition Temperature | ASTM D3418As the sheet prints it: D 3418 | in the median |
| Density | 1.22 g/cm3p. 1: Specific Gravity | ASTM D792As the sheet prints it: D 792 | |
| Melt mass-flow rate | 15 g/10 minp. 1: MFR | ASTM D1238As the sheet prints it: D 1238 | |
| Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO1 value | |||
| HDT | 85°Cp. 4: HDT | no standard statedannealed at a temperature its sheet does not state for a time its sheet does not stateannealed | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 0–45 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
- Annealing
- temperature not statedown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 190 - 230°C; Bed 0 - 45°CSpectrum, TECHNICAL DATA SHEET Huracan PLAp. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box
- Nozzle 185-230 °C; Bed 0-45 °C; Chamber not necessarySpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Nozzle temp. [°C]; p. 4: Bed temp. [°C]; p. 4: Closed chamber for printing; p. 4: Dry box recommended; p. 4: Ruby or hardened nozzle recommended; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
Price
40 CAD/kgits one regular price in the sample
1 listing
- 3D Printing Canada: 40 CAD/kgTrue Red - Spectrum Huracan PLA Filament - 1.75mm, 1kg (SKU 5903175659927)in its price; seen 30 Sep 2026
Its 4 documents
What the maker says (7)
- Benefits
Easy to print
Spectrum, TECHNICAL DATA SHEET Huracan PLAp. 1 - Benefits
Huracan PLA is an innovative filament designed for high speed 3D printing (up to 350mm/s), which combines incredible printing speed with unique mechanical and thermal (post-annealed) properties.
Spectrum, TECHNICAL DATA SHEET Huracan PLAp. 1 - Benefits
Better mechanical and thermal strength after annealing
Spectrum, TECHNICAL DATA SHEET Huracan PLAp. 1 - Benefits
High strength comparable to ABS
Spectrum, TECHNICAL DATA SHEET Huracan PLAp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET Huracan PLAp. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET Huracan PLAp. 1 - Benefits
High flow rate enabling fast printing (up to 350 mm/s), high strength comparable to ABS
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20
Spectrum rPLAStrength XY, MPa53.5Strength Z, MPa—Modulus XY, GPa3.42Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–215Bed, °C40–50Chamber, °CnoneDrying, °C, h508 h
Spectrum rPLASpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET rPLA10 valuesThe same values also in Spectrum, KARTA TECHNICZNA rPLA.Unless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3420 MPap. 1: Tensile Modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 50.2 MPap. 1: Tensile Strength at Yield | ISO 527 | not in the median: another value of this product is in it |
| Tensile break strength orientation not stated | 53.5 MPap. 1: Tensile Strength at Break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 5,50 %p. 1: Elongation at Yield | ISO 527 | listed under other properties |
| Flexural modulus orientation not stated | 3780 MPap. 1: Flexural Modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 60.7 MPap. 1: Flexural Strength | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 55-60 °Cp. 1: Glass Transition Temperature | no standard stated | in the median |
| Vicat softening temperature | 55 °Cp. 1: VICAT Softening Temparature | ISO 306 | |
| Density | 1.24 g/cm3p. 1: Specific Gravity | ASTM D792As the sheet prints it: D 792 | |
| Melt mass-flow rate | 5-7 g/10minp. 1: MFR (210°C, 2.16kg)also in Spectrum, KARTA TECHNICZNA rPLA | no standard namedAs the sheet prints it: 210°C 2.16kg | |
| Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO1 value | |||
| HDT | 55°Cp. 4: HDT | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
Print settings
- Nozzle
- 190–215 °Cown data sheet
- Bed
- 40–50 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its 4 print profiles, in the documents' words
- Nozzle 190-215°C; Bed 40-50°CSpectrum, TECHNICAL DATA SHEET rPLAp. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box; p. 1: settings footnote
- Nozzle 190-215 °C; Chamber not necessarySpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Nozzle temp. [°C]; p. 4: Closed chamber for printing; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
- Nozzle 190-215°C; Bed 40-50°CSpectrum, KARTA TECHNICZNA rPLAp. 1: Temperatura dyszy; p. 1: Temperatura stołu; p. 1: Suszarka do filamentu; p. 1: * ustawienia oparto na dyszy o średnicy 0,4 mm
Price
Not in the price sample.
Its 5 documents
What the maker says (7)
- Benefits
manufactured from recycled materials
Spectrum, TECHNICAL DATA SHEET rPLAp. 1 - Benefits
The raw material is collected, shredded, re-mixed and homogenised into a high-grade and easy-to-print recycled PLA filament with much less environmental impact.
Spectrum, TECHNICAL DATA SHEET rPLAp. 1 - Benefits
easy printing, similar to normal PLA
Spectrum, TECHNICAL DATA SHEET rPLAp. 1 - Warping and shrinkage
no shrinkage after cooling
Spectrum, TECHNICAL DATA SHEET rPLAp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET rPLAp. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET rPLAp. 1 - Benefits
Created by reusing the recycled extrusion residual waste stream, lower environmental impact
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20
FormFutura Volcano PLA 150CStrength XY, MPa43Strength Z, MPa—Modulus XY, GPa2.5Charpy notched, kJ/m²2HDT 0.45, °C110HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–225Bed, °C45–65Chamber, °CnoneDrying, °C, hnone
FormFutura Volcano PLA 150CFormFutura
Modified: crystallising grade. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, TECHNICAL DATA SHEET Volcano PLA 150C13 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2500 MPap. 1: Tensile modulus | ISO 527 | not in the median: added filler or additive |
| Tensile yield strength orientation not stated | 43 MPap. 1: Tensile strength at yield | ISO 527 | not in the median: added filler or additive |
| Tensile break strength orientation not stated | 28 MPap. 1: Tensile strength at break | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 11 %p. 1: Elongation at break | ISO 527 | not in the median: added filler or additive |
| Flexural modulus orientation not stated | 3300 MPap. 1: Flexural modulus | ISO 178 | not in the median: added filler or additive |
| Charpy impact strength | 15 kJ/m2p. 1: Impact strength (Charpy unnotched at 23 °C) | ISO 179As the sheet prints it: Charpy at 23 °C ISO 179 | not in the median: unnotched |
| Charpy impact strength | 2 kJ/m2p. 1: Impact strength (Charpy notched at 23 °C) | ISO 179As the sheet prints it: Charpy at 23 °C ISO 179 | not in the median: added filler or additive |
| Charpy impact strength | 13 kJ/m2p. 1: Impact strength (Charpy unnotched at -30 °C) | ISO 179As the sheet prints it: Charpy at -30 °C ISO 179 | not in the median: unnotched |
| HDT at 0.45 MPa | 110 °Cp. 1: HDT B | ISO 75As the sheet prints it: HDT B ISO 75 | not in the median: added filler or additive |
| Vicat softening temperature | 140 °Cp. 1: Vicat softening point | ISO 306 | |
| Melting temperature | 170 °Cp. 1: Melting point | no standard stated | |
| Crystallization temperature | 105 °Cp. 1: Crystallization temperature | no standard stated | |
| Density | 1,2 g/cm3p. 1: Density (23°C) | ISO 1183As the sheet prints it: 23°C ISO 1183 | |
Print settings
- Nozzle
- 195–225 °Cown data sheet
- Bed
- 45–65 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- not neededown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 195 - 225°C; Bed 45 - 65°C; Drying Not necessaryFormFutura, TECHNICAL DATA SHEET Volcano PLA 150Cp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (12)
- Good for
This makes Volcano PLA 150C ideal for functional prototypes and end-use components exposed to elevated temperatures.
FormFutura, TECHNICAL DATA SHEET Volcano PLA 150Cp. 1 - Good for
Heat-resistant fixtures or tools.
FormFutura, TECHNICAL DATA SHEET Volcano PLA 150Cp. 1 - Good for
Durable and sustainable end-use parts.
FormFutura, TECHNICAL DATA SHEET Volcano PLA 150Cp. 1 - Good for
Engineering prototypes.
FormFutura, TECHNICAL DATA SHEET Volcano PLA 150Cp. 1 - Benefits
Experience level: Beginner
FormFutura, TECHNICAL DATA SHEET Volcano PLA 150Cp. 1 - Benefits
As the name suggests, Volcano PLA 150C features an outstanding long term heat resistance of 150 °C, achieved without annealing or post-processing, for non-load-bearing parts.
FormFutura, TECHNICAL DATA SHEET Volcano PLA 150Cp. 1 - Benefits
It delivers an exceptional balance of rigidity, high impact resistance, and superior heat tolerance —all while maintaining the printability and ease of use of standard PLA.
FormFutura, TECHNICAL DATA SHEET Volcano PLA 150Cp. 1 - Benefits
No specialized equipment is required to achieve high-quality results.
FormFutura, TECHNICAL DATA SHEET Volcano PLA 150Cp. 1 - Benefits
Biodegradable according DIN EN 13432.
FormFutura, TECHNICAL DATA SHEET Volcano PLA 150Cp. 1 - Benefits
100% sustainable, oil-free, and compostable.
FormFutura, TECHNICAL DATA SHEET Volcano PLA 150Cp. 1 - Surface finish
Semi-matte surface finish.
FormFutura, TECHNICAL DATA SHEET Volcano PLA 150Cp. 1 - Moisture sensitivity
Drying: Not necessary Drybox: Not necessary
FormFutura, TECHNICAL DATA SHEET Volcano PLA 150Cp. 1
SIDDAMENT PLAStrength XY, MPa61Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²3.9IzodHDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C60Chamber, °CnoneDrying, °C, h502–4 h
SIDDAMENT PLASIDDAMENT
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SIDDAMENT, PLA - Technical Datasheet8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 61 MPap. 1: Tensile Strength ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 3.1 %p. 1: Elongation at Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2240 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 83 MPap. 1: Bending Strength ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 3.9 kJ/m2p. 1: Notched Impact Strength ISO 180 kJ/m2 | ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT | 53 °Cp. 1: Heat Deflection ISO 75 °C | ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm3p. 1: Density ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 0.3 %p. 1: Water Absorption ISO 62 % | ISO 62 | |
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 2–4 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 195-220°C; Bed 60°C; Drying If damp, dry at 50°C for 2-4 hours.SIDDAMENT, PLA - Technical Datasheetp. 1: Drying note; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Printing Platform; p. 2: Nozzle Diameter
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Supports and removal
Supporting Material: Self-supporting, PVA
SIDDAMENT, PLA - Technical Datasheetp. 2
SIDDAMENT PLA MatteStrength XY, MPa50.5Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²4.9IzodHDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C60Chamber, °CnoneDrying, °C, h502–4 h
SIDDAMENT PLA MatteSIDDAMENT
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| SIDDAMENT, PLA Matte - Technical Datasheet8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 50.5 MPap. 1: Tensile Strength ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 9.6 %p. 1: Elongation at Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2234 MPap. 1: Flexural Modulus ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 61 MPap. 1: Bending Strength ISO 178 MPa | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 4.9 kJ/m2p. 1: Notched Impact Strength ISO 180 kJ/m2 | ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT | 53 °Cp. 1: Heat Deflection ISO 75 °C | ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm3p. 1: Density ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 0.3 %p. 1: Water Absorption ISO 62 % | ISO 62 | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 2–4 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 200-230°C; Bed 60°C; Drying If damp, dry at 50°C for 2-4 hours.SIDDAMENT, PLA Matte - Technical Datasheetp. 1: Drying note; p. 2: Nozzle Temperature; p. 2: Bed Temperature; p. 2: Printing Platform; p. 2: Nozzle Diameter
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Supports and removal
Supporting Material: Self-supporting, PVA
SIDDAMENT, PLA Matte - Technical Datasheetp. 2
Spectrum THE FILAMENT HT-PLAStrength XY, MPa44Strength Z, MPa—Modulus XY, GPa2.62Charpy notched, kJ/m²2.1HDT 0.45, °C108HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C40–50Chamber, °CnoneDrying, °C, h508 h
Spectrum THE FILAMENT HT-PLASpectrum
Data sheet shared with The Filament HT-PLA: their values are one table, recorded once.
Modified: crystallising grade. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET THE FILAMENT HT-PLA9 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2620 MPap. 1: Tensile modulus | ISO 527 | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) orientation not stated | 44 MPap. 1: Tensile Strength | ISO 527 | not in the median: added filler or additive |
| Tensile break strength orientation not stated | 27,5 MPap. 1: Tensile strength at break | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 12 %p. 1: Elongation at break | ISO 527 | not in the median: added filler or additive |
| Flexural modulus orientation not stated | 3350 MPap. 1: Flexural Modulus | ISO 178 | not in the median: added filler or additive |
| Charpy impact strength | 2,1 kJ/m2p. 1: Charpy impact strength notched, 23°C | ISO 179As the sheet prints it: 23°C ISO 179 | not in the median: added filler or additive |
| HDT | 108 °Cp. 1: Heat Deflection Temperature | no standard stated | not in the median: added filler or additive |
| Vicat softening temperature | 140 °Cp. 1: VICAT | no standard stated | |
| Density | 1.2 g/cm3p. 1: Specific Gravity | ISO 1183 | |
| Spectrum, TECHNICAL DATA SHEET THE FILAMENT HT-PLA1 value | |||
| Charpy impact strength orientation not stated | 2,1 kJ/m2p. 1: Charpy impact strength notched, 23°C | ISO 179As the sheet prints it: ISO 179; notched | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 40–50 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 195-220°C; Bed 40-50°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT HT-PLAp. 1: Recommended printing settings; p. 1: Dry box recommended; p. 1: Adhesive; p. 1: settings footnote
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Surface finish
Surface finish shiny
Spectrum, TECHNICAL DATA SHEET THE FILAMENT HT-PLAp. 1 - Moisture sensitivity
Dry box recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT HT-PLAp. 1 - Nozzle wear
Ruby or hardened nozzle recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT HT-PLAp. 1 - Odour and emissions
VICAT - 140°, biodegradable, odour-free printing
Spectrum, TECHNICAL DATA SHEET THE FILAMENT HT-PLAp. 1
The Filament HT-PLAStrength XY, MPa44Strength Z, MPa—Modulus XY, GPa2.62Charpy notched, kJ/m²2.1HDT 0.45, °C108HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C40–50Chamber, °CnoneDrying, °C, h508 h
The Filament HT-PLAThe Filament
Data sheet shared with Spectrum THE FILAMENT HT-PLA: their values are one table, recorded once.
Modified: crystallising grade. Its values are kept out of the material's medians.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 40–50 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 195-220°C; Bed 40-50°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT HT-PLAp. 1: Nozzle temperature, Bed temperature, Closed chamber for printing, Ruby or hardened nozzle; p. 1: Dry box recommended; p. 1: * settings are based on a 0,4 mm nozzle.
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Surface finish
Surface finish shiny
Spectrum, TECHNICAL DATA SHEET THE FILAMENT HT-PLAp. 1 - Moisture sensitivity
Dry box recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT HT-PLAp. 1 - Nozzle wear
Ruby or hardened nozzle recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT HT-PLAp. 1 - Odour and emissions
odour-free printing
Spectrum, TECHNICAL DATA SHEET THE FILAMENT HT-PLAp. 1
colorFabb BronzeFillStrength XY, MPa20.3Strength Z, MPa—Modulus XY, GPa4.73Charpy notched, kJ/m²2.84HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C50–60Chamber, °C—Drying, °C, h506 h
colorFabb BronzeFillcolorFabb
Modified: undisclosed dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| colorFabb, Technical datasheet colorFabb bronzeFill9 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus orientation not stated | 4730 MPap. 1: Youngs Modulus Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) orientation not stated | 20.3 MPap. 1: Tensile Strength Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | not in the median: added filler or additive |
| Elongation at break orientation not stated | 6.1 %p. 1: Elongation at break Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | not in the median: added filler or additive |
| Flexural modulus orientation not stated | 5070 MPap. 1: Flexural Modulus Flexural, ISO 178 | ISO 178 | not in the median: added filler or additive |
| Flexural strength orientation not stated | 42.0 MPap. 1: Flexural Strength Flexural, ISO 178 | ISO 178 | not in the median: added filler or additive |
| Charpy impact strength | 2.84 kJ/m2p. 1: Impact Strength Charpy Notch, ISO 179 | ISO 179notched | not in the median: added filler or additive |
| Izod impact strength | 4.5 kJ/m2p. 1: Izod Impact Strength Izod Notch, ISO 180 | moulded bar (resin supplier's value), ISO 180notched | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 48 °Cp. 1: Heat Deflection Temp. HDT-B, ISO 75 | moulded bar (resin supplier's value), ISO 75As the sheet prints it: HDT B ISO 75 | not in the median: measured on a moulded bar |
| Density | 3.9 g/cm3p. 1: Density ISO 1183 | moulded bar (resin supplier's value), ISO 1183 | |
| colorFabb, Technical datasheet colorFabb BronzeFill6 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 30 MPap. 1: Tensile Strength MPa | ISO 527 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Elongation at break orientation not stated | 5-10 %p. 1: Tensile Elongation@break % | ISO 527 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Flexural modulus orientation not stated | 9000 MPap. 1: Flexural Modulus MPa | ISO 178 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Flexural strength orientation not stated | 40 MPap. 1: Flexural Strength MPa | ISO 178 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Izod impact strength | 10 kJ/m2p. 1: Impact Strength (Izod-Un 23°C) kJ/m2 | ISO 180As the sheet prints it: Izod-Un 23°C ISO 180 | not in the median: unnotched |
| Water absorption | 0,3 %p. 1: Humidity absorption (23°C,50%RH) % | no standard namedAs the sheet prints it: 23°C 50%RH | |
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 50 °C for 6 hown data sheet
- Hardened nozzle
- not stated
Its 3 print profiles, in the documents' words
- Nozzle 195 - 220°C; Bed 50-60°CcolorFabb, Technical datasheet colorFabb BronzeFillp. 1: Recommended printing settings; p. 1: Bed surface / modification
- Nozzle 195-220 °C; Bed 50-60 °CcolorFabb, Technical datasheet colorFabb bronzeFillp. 2: Recommended printing settings; p. 2: Bed / surface modification
- Drying 50 °C, 6 hcolorFabb, colorFabb Print Support– 3D Printing Guides, Tips & Supportp. 1: Filament drying (before printing)
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- MakerWiz: 99.9 per kg, sale priceColorFabb BronzeFill (750 g) / 1.75 mm (SKU 22000013-1)not used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 4 documents
What the maker says (11)
- Good for
colorFabb bronzeFill is a high quality PLA 3D printing filament, loaded with bronze particles, specially developed for aesthetic prints.
colorFabb, Technical datasheet colorFabb bronzeFillp. 1 - Benefits
Not only the look and feel that turn these print into art, but in turn also the weight – which is about three to four times heavier than regular PLA(/PHA).
colorFabb, Technical datasheet colorFabb bronzeFillp. 1 - Surface finish
Polishing of the printed objects result in a shiny bronze print, with an astonishing statue-like finish.
colorFabb, Technical datasheet colorFabb bronzeFillp. 1 - Surface finish
Sanding and polishing your parts will make the bronze particle shimmer.
colorFabb, Technical datasheet colorFabb bronzeFillp. 2 - Surface finish
Start sanding with sandpaper of grid 120-180.
colorFabb, Technical datasheet colorFabb bronzeFillp. 2 - Surface finish
Start working your way up to sandpaper with grid 240-320, and finish with grit 600 – or higher.
colorFabb, Technical datasheet colorFabb bronzeFillp. 2 - Surface finish
Finally, use a clean soft cloth, and some copper polish.
colorFabb, Technical datasheet colorFabb bronzeFillp. 2 - Printing advice
Depending on your set-up, 3D printers and slice software, the bronzeFill requires more flow than normal PLA materials.
colorFabb, Technical datasheet colorFabb bronzeFillp. 2 - Printing advice
Since bronzeFill does not exhibit such swelling behavior, it is recommended to decrease the flow rate slightly (4-8% was sufficient for UM2, UM did not need adjustment).
colorFabb, Technical datasheet colorFabb bronzeFillp. 2 - Good for
ColorFabb BronzeFill is a high quality PLA 3D printing filament, loaded with a high amount of bronze particles, especially developed for aesthetic prints.
colorFabb, Technical datasheet colorFabb BronzeFillp. 1 - Surface finish
After printing, the objects need to be polished which will result in shiny bronze-like objects.
colorFabb, Technical datasheet colorFabb BronzeFillp. 1
colorFabb PLA Color On Demand (COD)Strength XY, MPa55.7Strength Z, MPa—Modulus XY, GPa3.47Charpy notched, kJ/m²2.3HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C50–60Chamber, °CnoneDrying, °C, h508 h
colorFabb PLA Color On Demand (COD)colorFabb
Sold as toughened or impact-modified: "impact modified to improve toughness" (colorFabb, Technical datasheet PLA Color On Demand (COD), p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| colorFabb, Technical datasheet PLA Color On Demand (COD)13 values | |||
| Tensile modulus orientation not stated | 3470 MPap. 1: Youngs Modulus Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | in the median |
| Tensile strength (yield or break not stated) orientation not stated | 55.7 MPap. 1: Tensile Strength Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | in the median |
| Elongation at break orientation not stated | 3.5 %p. 1: Elongation at break Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | in the median |
| Flexural modulus orientation not stated | 3260 MPap. 1: Flexural Modulus Flexural, ISO 178 | ISO 178 | in the median |
| Flexural strength orientation not stated | 93.8 MPap. 1: Flexural Strength Flexural, ISO 178 | ISO 178 | in the median |
| Charpy impact strength | 2.3 kJ/m2p. 1: Impact Strength Charpy Notch, ISO 179 | ISO 179notched | not in the median: sold as toughened, set apart |
| Charpy impact strength | 5.0 kJ/m2p. 1: Charpy Impact Charpy Notch, ISO 179 | ISO 179notched | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 53 °Cp. 1: Heat Deflection Temp. HDT-B, ISO 75 | ISO 75As the sheet prints it: HDT B ISO 75 | not in the median: measured on a moulded bar |
| Glass transition temperature | 55-60 °Cp. 1: Glass Transition Temp. DSC, ISO 11357 | ISO 11357 | not in the median: the resin supplier's value, not a printed part |
| Melting temperature | 150-160 °Cp. 1: Melting Temp. DSC, ISO 11357 | ISO 11357 | |
| Density | 1.2 g/cm3p. 1: Density ISO 1183 | ISO 1183 | |
| Melt mass-flow rate | 6 g/10minp. 1: Melt Flow Index MFI, (210°C/2.16 kg) | ISO 1133As the sheet prints it: 210°C/2.16 kg ISO 1133-A | |
| Melt mass-flow rate | 3 g/10 minp. 1: Melt Flow Index MFI, (190°C/1,16 kg) | ISO 1133As the sheet prints it: 190°C/1 16 kg ISO 1133-A | |
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 195-220 °C; Bed 50-60 °CcolorFabb, Technical datasheet PLA Color On Demand (COD)p. 2: Recommended printing settings: Nozzle Temp; p. 2: Bed / surface modification
Price
Not in the price sample.
Its 3 documents
What the maker says (2)
- Precision and tolerance
All orders are made on demand, during the production process the color is visually checked with approved benchmark samples.
colorFabb, PLA 3D print filament, your Color is our Demandp. 1 - Benefits
impact modified to improve toughness
colorFabb, Technical datasheet PLA Color On Demand (COD)p. 1
colorFabb PLA High Speed PROStrength XY, MPa43.7Strength Z, MPa—Modulus XY, GPa2.63Charpy notched, kJ/m²27.9HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C215–225Bed, °C50–60Chamber, °CnoneDrying, °C, h508 h
colorFabb PLA High Speed PROcolorFabb
Sold as toughened or impact-modified: "colorFabb’s PLA High Speed PRO filament delivers unmatched all-round performance with fast, efficient prints and enhanced toughness, making it the most versatile filament in our lineup to date." (colorFabb, Technical datasheet colorFabb PLA High Speed PRO, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| colorFabb, Technical datasheet colorFabb PLA High Speed PRO12 valuesThe same values also in colorFabb, Technical datasheet colorFabb PLA High Speed PRO. | |||
| Tensile modulus XY | 2630 MPap. 1: Youngs Modulus Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1Aprint settingsThe specimens have been printed in XY plane, using 0.2 mm layer height, 100% infill, 0,4 mm nozzle, 220˚C nozzle temperature and 60˚C bed temperature. | in the median |
| Tensile strength (yield or break not stated) XY | 43.7 MPap. 1: Tensile Strength Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1Aprint settingsThe specimens have been printed in XY plane, using 0.2 mm layer height, 100% infill, 0,4 mm nozzle, 220˚C nozzle temperature and 60˚C bed temperature. | in the median |
| Elongation at break XY | 5.7 %p. 1: Elongation at break Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1Aprint settingsThe specimens have been printed in XY plane, using 0.2 mm layer height, 100% infill, 0,4 mm nozzle, 220˚C nozzle temperature and 60˚C bed temperature. | in the median |
| Flexural modulus XY | 2290 MPap. 1: Flexural Modulus Flexural, ISO 178 | ISO 178print settingsThe specimens have been printed in XY plane, using 0.2 mm layer height, 100% infill, 0,4 mm nozzle, 220˚C nozzle temperature and 60˚C bed temperature. | in the median |
| Flexural strength XY | 71.0 MPap. 1: Flexural Strength Flexural, ISO 178 | ISO 178print settingsThe specimens have been printed in XY plane, using 0.2 mm layer height, 100% infill, 0,4 mm nozzle, 220˚C nozzle temperature and 60˚C bed temperature. | in the median |
| Charpy impact strength XY | 27.9 kJ/m2p. 1: Impact Strength Charpy Notch, ISO 179also in colorFabb, Technical datasheet colorFabb PLA High Speed PRO | ISO 179notched | not in the median: sold as toughened, set apart |
| HDT at 0.45 MPa | 57 °Cp. 1: Heat Deflection Temp. HDT-B, ISO 75 | ISO 75As the sheet prints it: HDT B ISO 75 | not in the median: measured on a moulded bar |
| Glass transition temperature | 60 °Cp. 1: Glass Transition Temp. DSC, ISO 11357 | ISO 11357 | not in the median: the resin supplier's value, not a printed part |
| Melting temperature | 165 °Cp. 1: Melting Temp. DSC, ISO 11357 | ISO 11357 | |
| Density | 1.24 g/cm3p. 1: Density ISO 1183 | ISO 1183 | |
| Melt mass-flow rate | 23 g/10minp. 1: Melt Flow Index MFI, (210°C/2.16 kg) | ISO 1133As the sheet prints it: 210°C/2.16 kg ISO 1133-A | |
| Melt mass-flow rate | 10 g/10 minp. 1: Melt Flow Index MFI, (190°C/1,16 kg) | ISO 1133As the sheet prints it: 190°C/1 16 kg ISO 1133-A | |
Print settings
- Nozzle
- 215–225 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 215-225 °C; Bed 50-60 °CcolorFabb, Technical datasheet colorFabb PLA High Speed PROp. 2: Recommended printing settings
- Nozzle 215-225 °CcolorFabb, Technical datasheet colorFabb PLA High Speed PROp. 2: Nozzle Temp.
Price
Not in the price sample.
Its 3 documents
What the maker says (2)
- Benefits
colorFabb’s PLA High Speed PRO filament delivers unmatched all-round performance with fast, efficient prints and enhanced toughness, making it the most versatile filament in our lineup to date.
colorFabb, Technical datasheet colorFabb PLA High Speed PROp. 1 - Benefits
With seamless compatibility with most 3D printers, it integrates effortlessly using existing high-speed profiles.
colorFabb, Technical datasheet colorFabb PLA High Speed PROp. 1
colorFabb PLA RegrindStrength XY, MPa59.7Strength Z, MPa—Modulus XY, GPa3.42Charpy notched, kJ/m²2.87HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C50–60Chamber, °CnoneDrying, °C, h508 h
colorFabb PLA RegrindcolorFabb
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| colorFabb, Technical datasheet PLA Regrind14 values | |||
| Tensile modulus XY | 3420 MPap. 1: Youngs Modulus Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1Aprint settingsThe specimens have been printed in XY plane, using 0,15 mm layer height, 100% infill, 0,4 mm nozzle, 210˚C nozzle temperature and 55˚C bed temperature. | in the median |
| Tensile strength (yield or break not stated) XY | 59.7 MPap. 1: Tensile Strength Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1Aprint settingsThe specimens have been printed in XY plane, using 0,15 mm layer height, 100% infill, 0,4 mm nozzle, 210˚C nozzle temperature and 55˚C bed temperature. | in the median |
| Elongation at break XY | 3.8 %p. 1: Elongation at break Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1Aprint settingsThe specimens have been printed in XY plane, using 0,15 mm layer height, 100% infill, 0,4 mm nozzle, 210˚C nozzle temperature and 55˚C bed temperature. | in the median |
| Flexural modulus XY | 3110 MPap. 1: Flexural Modulus Flexural, ISO 178 | ISO 178print settingsThe specimens have been printed in XY plane, using 0,15 mm layer height, 100% infill, 0,4 mm nozzle, 210˚C nozzle temperature and 55˚C bed temperature. | in the median |
| Flexural strength XY | 97.6 MPap. 1: Flexural Strength Flexural, ISO 178 | ISO 178print settingsThe specimens have been printed in XY plane, using 0,15 mm layer height, 100% infill, 0,4 mm nozzle, 210˚C nozzle temperature and 55˚C bed temperature. | in the median |
| Charpy impact strength XY | 2.87 kJ/m2p. 1: Impact Strength Charpy Notch, ISO 179 | ISO 179notched | in the median |
| Charpy impact strength XY | held back: the sheet's unit or table layout is unclearheld backp. 1: Impact Strength | ISO 179As the sheet prints it: ISO 179; notched | not in the median: held back |
| Charpy impact strength | 5.0 kJ/m2p. 1: Charpy Impact Charpy Notch, ISO 179 | ISO 179notched | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 60 °Cp. 1: Heat Deflection Temp. HDT-B, ISO 75 | ISO 75As the sheet prints it: HDT B ISO 75 | not in the median: measured on a moulded bar |
| Glass transition temperature | 55-60 °Cp. 1: Glass Transition Temp. DSC, ISO 11357 | ISO 11357 | not in the median: the resin supplier's value, not a printed part |
| Melting temperature | 150-160 °Cp. 1: Melting Temp. DSC, ISO 11357 | ISO 11357 | |
| Density | 1,2 g/cm3p. 1: Density ISO 1183 | ISO 1183 | |
| Melt mass-flow rate | 6 g/10minp. 1: Melt Flow Index MFI, (210°C/2.16 kg) | ISO 1133As the sheet prints it: 210°C/2.16 kg ISO 1133-A | |
| Melt mass-flow rate | 3 g/10 minp. 1: Melt Flow Index MFI, (190°C/1,16 kg) | ISO 1133As the sheet prints it: 190°C/1 16 kg ISO 1133-A | |
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 195-220 °C; Bed 50-60 °CcolorFabb, Technical datasheet PLA Regrindp. 2: Recommended printing settings; p. 2: Bed / surface modification
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Pitfalls and limitations
Please note: each production run will entail slight deviation in color due to the deviation in the filament that is used for recycling.
colorFabb, Technical datasheet PLA Regrindp. 1
colorFabb steelFillStrength XY, MPa21.1Strength Z, MPa—Modulus XY, GPa3.31Charpy notched, kJ/m²2.41HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–210Bed, °C50–60Chamber, °C—Drying, °C, h506 h
colorFabb steelFillcolorFabb
Modified: undisclosed dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| colorFabb, Technical datasheet colorFabb steelFill9 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus orientation not stated | 3310 MPap. 1: Youngs Modulus Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) orientation not stated | 21.1 MPap. 1: Tensile Strength Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | not in the median: added filler or additive |
| Elongation at break orientation not stated | 2.4 %p. 1: Elongation at break Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | not in the median: added filler or additive |
| Flexural modulus orientation not stated | 3190 MPap. 1: Flexural Modulus Flexural, ISO 178 | ISO 178 | not in the median: added filler or additive |
| Flexural strength orientation not stated | 35.2 MPap. 1: Flexural Strength Flexural, ISO 178 | ISO 178 | not in the median: added filler or additive |
| Charpy impact strength | 2.41 kJ/m2p. 1: Impact Strength Charpy Notch, ISO 179 | ISO 179notched | not in the median: added filler or additive |
| Izod impact strength | 4,5 kJ/m2p. 1: Izod Impact Strength Izod Notch, ISO 180 | moulded bar (resin supplier's value), ISO 180notched | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 50 °Cp. 1: Heat Deflection Temp. HDT-B, ISO 75 | moulded bar (resin supplier's value), ISO 75As the sheet prints it: HDT B ISO 75 | not in the median: measured on a moulded bar |
| Density | 3.13 g/cm3p. 1: Density ISO 1183 | moulded bar (resin supplier's value), ISO 1183 | |
| colorFabb, Technical datasheet colorFabb SteelFill6 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 23 MPap. 1: Tensile Strength MPa | ISO 527 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Elongation at break orientation not stated | 1-3 %p. 1: Tensile Elongation@break % | ISO 527 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Flexural modulus orientation not stated | 3000 MPap. 1: Flexural Modulus MPa | ISO 178 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Flexural strength orientation not stated | 30 MPap. 1: Flexural Strength MPa | ISO 178 | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Izod impact strength | 10 kJ/m2p. 1: Impact Strength (Izod-Un 23°C) kJ/m2 | ISO 180As the sheet prints it: Izod-Un 23°C ISO 180 | not in the median: unnotched |
| Water absorption | 0,3 %p. 1: Humidity absorption (23°C,50%RH) % | no standard namedAs the sheet prints it: 23°C 50%RH | |
Print settings
- Nozzle
- 190–210 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- 50 °C for 6 hown data sheet
- Hardened nozzle
- neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 190-210 °C; Bed 50-60 °CcolorFabb, Technical datasheet colorFabb steelFillp. 2: Recommended printing settings; p. 2: Nozzle note; p. 2: Bed / surface modification
- Nozzle 190 - 210°C; Bed 50-60°CcolorFabb, Technical datasheet colorFabb SteelFillp. 1: Recommended printing settings; p. 1: Bed surface / modification
- Drying 50 °C, 6 hcolorFabb, colorFabb Print Support– 3D Printing Guides, Tips & Supportp. 1: Filament drying (before printing)
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- MakerWiz: 99.9 per kg, sale priceColorFabb SteelFill (750 g) / 1.75 mmnot used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 4 documents
What the maker says (9)
- Good for
colorFabb steelFill is a high quality PLA 3D printing filament with a high amount of stainless steel particles, specially developed for aesthetic prints.
colorFabb, Technical datasheet colorFabb steelFillp. 1 - Surface finish
Sanding and polishing your parts will make the bronze particle shimmer.
colorFabb, Technical datasheet colorFabb steelFillp. 2 - Surface finish
Start sanding with sandpaper of grid 120-180.
colorFabb, Technical datasheet colorFabb steelFillp. 2 - Surface finish
Start working your way up to sandpaper with grid 240-320, and finish with grit 600 – or higher.
colorFabb, Technical datasheet colorFabb steelFillp. 2 - Surface finish
Finally, use a clean soft cloth, and some copper polish.
colorFabb, Technical datasheet colorFabb steelFillp. 2 - Nozzle wear
the high steel content of the steelFill filament can be abrasive to brass nozzles.
colorFabb, Technical datasheet colorFabb steelFillp. 2 - Nozzle wear
Therefore, it is recommended to print with abrasive resistant nozzles, such as E3D hardened steel nizzle, the JET RSS50, or the performance 3D Hercules nozzle.
colorFabb, Technical datasheet colorFabb steelFillp. 2 - Good for
ColorFabb SteelFill is a high quality PLA 3D printing filament, loaded with a high amount of stainless steel particles, especially developed for aesthetic prints.
colorFabb, Technical datasheet colorFabb SteelFillp. 1 - Surface finish
After printing, the objects need to be polished which will result in shiny and robust steel like appearance.
colorFabb, Technical datasheet colorFabb SteelFillp. 1
colorFabb Vibers PLAStrength XY, MPa36.8Strength Z, MPa—Modulus XY, GPa2.91Charpy notched, kJ/m²3.05HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C50–60Chamber, °CnoneDrying, °C, h508 h
colorFabb Vibers PLAcolorFabb
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
colorFabb, Technical datasheet Vibers PLA6 valuesUnless a row says otherwise: printed specimenprint settingsThe specimens have been printed in XY plane, using 0,15 mm layer height, 100% infill, 0,4 mm nozzle, 210 ˚C nozzle temperature and 55˚C bed temperature. | |||
| Tensile modulus XY | 2910 MPap. 1: Youngs Modulus Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | in the median |
| Tensile strength (yield or break not stated) XY | 36.8 MPap. 1: Tensile Strength Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | in the median |
| Elongation at break XY | 5.0 %p. 1: Elongation at break Tensile, ISO 527-1A | ISO 527As the sheet prints it: ISO 527-1A | in the median |
| Flexural modulus XY | 2720 MPap. 1: Flexural Modulus Flexural, ISO 178 | ISO 178 | in the median |
| Flexural strength XY | 65.0 MPap. 1: Flexural Strength Flexural, ISO 178 | ISO 178 | in the median |
| Charpy impact strength XY | 3.05 kJ/m2p. 1: Impact Strength Charpy Notch, ISO 179 | ISO 179notchedprint settings not stated | in the median |
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 195-220 °C; Bed 50-60 °CcolorFabb, Technical datasheet Vibers PLAp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Surface finish
colorFabb Vibers PLA is a aesthetically appealing filament that creates a most stunning smooth and matte surface on 3D printed items, and gives users a chance to print more carbon neutral.
colorFabb, Technical datasheet Vibers PLAp. 1
Flashforge HS PLAStrength XY, MPa45Strength Z, MPa—Modulus XY, GPa2Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C30–65Chamber, °CnoneDrying, °C, h508 h
Flashforge HS PLAFlashforge
Sold as toughened or impact-modified: "reinforced and toughened modified polylactic acid material" (Flashforge, Technical Data Sheet HS PLA Filament, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Flashforge, Technical Data Sheet HS PLA Filament13 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus XY | 2000-2100 Mpap. 1: Modulus of Elasticity (X-Y) ISO 527 Mpa | ISO 527 | in the median |
| Tensile modulus XZ | 1950-2050 Mpap. 1: Modulus of Elasticity (X-Z) ISO 527 Mpa | ISO 527 | not in the median: measured on a bar in another orientation |
| Tensile strength (yield or break not stated) XY | 45-49 Mpap. 1: Tensile Strength (X-Y) ISO 527 Mpa | ISO 527 | in the median |
| Tensile strength (yield or break not stated) XZ | 35-40 Mpap. 1: Tensile Strength (X-Z) ISO 527 Mpa | ISO 527 | not in the median: measured on a bar in another orientation |
| Elongation at break XY | 10.5-15.5 %p. 1: Elongation at Break (X-Y) ISO 527 % | ISO 527 | in the median |
| Elongation at break XZ | 5-8 %p. 1: Elongation at Break (X-Z) ISO 527 % | ISO 527 | not in the median: measured on a bar in another orientation |
| Flexural strength XY | 70-80 Mpap. 1: Bending Strength (X-Y) ISO 178 Mpa | ISO 178 | in the median |
| Izod impact strength XY | 4.5-5 KJ/㎡p. 1: Izod Impact Strength (X-Y) ISO 180 KJ/㎡ | ISO 180 | not in the median: notch not stated |
| HDT at 0.45 MPa | 53 ℃p. 1: HDT@ 0.455 MPa(66 psi) ISO 75 ℃ | ISO 75As the sheet prints it: 0.455 MPa (66 psi) ISO 75 | in the median |
| Continuous service temperature | 50 ℃p. 1: Continuous Service Temperature IEC 60216 ℃ | specimen not stated, IEC 60216 | |
| Density | 1.25-1.26 g/cm³p. 1: Density ISO 1183 g/cm³ | specimen not stated, ISO 1183 | |
| Water absorption | 0.3 %p. 1: Water Absorption (23℃/24h) ISO 62 % | specimen not stated, ISO 62As the sheet prints it: 23℃/24h ISO 62 | |
| Melt mass-flow rate | 10-20 g/10minp. 1: Melt Flow Rate (MFR) (190℃/2.16Kg) ISO 1133 g/10min | specimen not stated, ISO 1133As the sheet prints it: MFR 190℃/2.16Kg ISO 1133 | |
Print settings
- Nozzle
- 190–230 °CBambu Lab Filament Guide
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- No temperature statedFlashforge, Technical Data Sheet HS PLA Filamentp. 2: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
It is highly suitable for use in high-speed FFF 3D printers.
Flashforge, Technical Data Sheet HS PLA Filamentp. 1 - Benefits
High fluidity/Easy to print/Dimensional stability/High rigidity
Flashforge, Technical Data Sheet HS PLA Filamentp. 1 - Benefits
reinforced and toughened modified polylactic acid material
Flashforge, Technical Data Sheet HS PLA Filamentp. 1
Flashforge PLAStrength XY, MPa45Strength Z, MPa—Modulus XY, GPa1Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C25–60Chamber, °C25–40Drying, °C, h508 h
Flashforge PLAFlashforge
Data sheet shared with Flashforge PLA Multicolor: their values are one table, recorded once.
Sold as toughened or impact-modified: "reinforced and toughened polylactic acid modified material" (Flashforge, Technical Data Sheet PLA Filament, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Flashforge, Technical Data Sheet PLA Filament10 values | |||
| Tensile modulus XY | 1000-1100 Mpap. 1: Modulus of Elasticity (X-Y) ISO 527 Mpa | ISO 527as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | in the median |
| Tensile strength (yield or break not stated) XY | 45-49 Mpap. 1: Tensile Strength (X-Y) ISO 527 Mpa | ISO 527as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | in the median |
| Elongation at break XY | 13.5-15.5 %p. 1: Elongation at Break (X-Y) ISO 527 % | ISO 527as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | in the median |
| Flexural strength XY | 69-75 Mpap. 1: Bending Strength (X-Y) ISO 178 Mpa | ISO 178as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | in the median |
| Izod impact strength XY | 4.5-5 KJ/m2p. 1: Izod Impact Strength (X-Y) ISO 180 KJ/m2 | ISO 180as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | not in the median: notch not stated |
| HDT at 0.45 MPa | 53 ℃p. 1: HDT@ 0.455 MPa (66 psi) ISO 75 ℃ | ISO 75As the sheet prints it: 0.455 MPa 66 psi ISO 75 | in the median |
| Continuous service temperature | 50 ℃p. 1: Continuous Service Temperature IEC 60216 ℃ | IEC 60216 | |
| Density | 1.25-1.26 g/cm3p. 1: Density ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 0.3 %p. 1: Water Absorption (23℃/24h) ISO 62 % | ISO 62As the sheet prints it: 23℃/24h ISO 62 | |
| Melt mass-flow rate | 4-8 g/10minp. 1: Melt Index MFR (190℃/2.16Kg) ISO 1133 g/10min | ISO 1133As the sheet prints it: 190℃/2.16Kg ISO 1133 | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- 25–40 °Cown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190~220℃ (210℃ recommended); Bed Room temperature~60℃ (40℃ recommended); Chamber Room temperature~40℃Flashforge, Technical Data Sheet PLA Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 2: Build Surface Material; p. 2: Nozzle Diameter (recommended printing settings)
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Benefits
PLA has excellent dimensional stability, bending strength and rigidity, no warping, no cracking and easy-to-print property, which is generally applicable to various FFF 3D printers.
Flashforge, Technical Data Sheet PLA Filamentp. 1 - Benefits
Easy-to-print property/Dimensional stability/High rigidity.
Flashforge, Technical Data Sheet PLA Filamentp. 1 - Supports and removal
Recommended Support Material Self-supporting, PVA, BVOH
Flashforge, Technical Data Sheet PLA Filamentp. 2 - Benefits
reinforced and toughened polylactic acid modified material
Flashforge, Technical Data Sheet PLA Filamentp. 1
Flashforge PLA CrystalStrength XY, MPa48.2Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C50HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C25–60Chamber, °C25–40Drying, °C, h508 h
Flashforge PLA CrystalFlashforge
Sold as toughened or impact-modified: "toughened, high- transparency modified PLA material" (Flashforge, Technical Data Sheet PLA Crystal Filament, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Flashforge, Technical Data Sheet PLA Crystal Filament10 values | |||
| Tensile strength (yield or break not stated) XY | 48.2-50.8 Mpap. 1: Tensile Strength (X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Flashforge AD5X; Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 200mm/s; Infill Density 100%; Infill Pattern Concentric | in the median |
| Elongation at break XY | 5.5-5.9 %p. 1: Elongation at Break (X-Y) ISO 527 % | ISO 527print settingsTest Equipment Flashforge AD5X; Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 200mm/s; Infill Density 100%; Infill Pattern Concentric | in the median |
| Flexural modulus XY | 2700-2835 Mpap. 1: Bending Modulus (X-Y) ISO 178 Mpa | ISO 178print settingsTest Equipment Flashforge AD5X; Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 200mm/s; Infill Density 100%; Infill Pattern Concentric | in the median |
| Flexural strength XY | 85-87 Mpap. 1: Bending Strength (X-Y) ISO 178 Mpa | ISO 178print settingsTest Equipment Flashforge AD5X; Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 200mm/s; Infill Density 100%; Infill Pattern Concentric | in the median |
| Izod impact strength XY | 3.3-4.6 KJ/m2p. 1: Izod Impact Strength (X-Y) ISO 180 KJ/m2 | ISO 180print settingsTest Equipment Flashforge AD5X; Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 200mm/s; Infill Density 100%; Infill Pattern Concentric | not in the median: notch not stated |
| HDT at 0.45 MPa | 50 ℃p. 1: HDT@ 0.455 MPa (66 psi) ISO 75 ℃ | ISO 75As the sheet prints it: 0.455 MPa 66 psi ISO 75 | in the median |
| Continuous service temperature | 45 ℃p. 1: Continuous Service Temperature IEC 60216 ℃ | IEC 60216 | |
| Density | 1.25-1.26 g/cm³p. 1: Density ISO 1183 g/cm³ | ISO 1183 | |
| Water absorption | 0.3 %p. 1: Water Absorption (23℃/24h) ISO 62 % | ISO 62As the sheet prints it: 23℃/24h ISO 62 | |
| Melt mass-flow rate | 4-8 g/10minp. 1: Melt Index (MFR) (190℃/2.16Kg) ISO 1133 g/10min | ISO 1133As the sheet prints it: MFR 190℃/2.16Kg ISO 1133 | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- 25–40 °Cown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190~220℃ (210℃ recommended); Bed Room temperature~60℃ (50℃ recommended); Chamber Room temperature~40℃Flashforge, Technical Data Sheet PLA Crystal Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 2: Build Surface Material; p. 2: Nozzle Diameter (recommended printing settings)
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Benefits
PLA Crystal offers excellent transparency with a light transmittance of over 90%.
Flashforge, Technical Data Sheet PLA Crystal Filamentp. 1 - Benefits
Easy to print/Dimensional stability/High transparency.
Flashforge, Technical Data Sheet PLA Crystal Filamentp. 1 - Warping and shrinkage
It does not warp or crack and is easy to print, suitable for various FFF 3D printers.
Flashforge, Technical Data Sheet PLA Crystal Filamentp. 1 - Printing advice
Higher speeds require higher temperatures.
Flashforge, Technical Data Sheet PLA Crystal Filamentp. 2 - Benefits
toughened, high- transparency modified PLA material
Flashforge, Technical Data Sheet PLA Crystal Filamentp. 1
Flashforge PLA MatteStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa1.5Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C25–60Chamber, °C25–40Drying, °C, h508 h
Flashforge PLA MatteFlashforge
Sold as toughened or impact-modified: "toughened matte polylactic acid modified material" (Flashforge, Technical Data Sheet PLA Matte Filament, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Flashforge, Technical Data Sheet PLA Matte Filament10 values | |||
| Tensile modulus XY | 1500-1700 Mpap. 1: Modulus of Elasticity(X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 220 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Tensile strength (yield or break not stated) XY | 50-55 Mpap. 1: Tensile Strength(X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 220 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Elongation at break XY | 6-7 %p. 1: Elongation at Break(X-Y) ISO 527 % | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 220 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Flexural strength XY | 63-65 Mpap. 1: Bending Strength(X-Y) ISO 178 Mpa | ISO 178print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 220 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Izod impact strength XY | 7-9 KJ/m2p. 1: Izod Impact Strength(X-Y) ISO 180 KJ/m2 | ISO 180print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 220 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | not in the median: notch not stated |
| HDT at 0.45 MPa | 53 ℃p. 1: HDT@ 0.455 MPa(66 psi) ISO 75 ℃ | ISO 75As the sheet prints it: 0.455 MPa 66 psi ISO 75 | in the median |
| Continuous service temperature | 50 ℃p. 1: Continuous Service Temperature IEC 60216 ℃ | IEC 60216 | |
| Density | 1.23-1.25 g/cm³p. 1: Density ISO 1183 g/cm³ | ISO 1183 | |
| Water absorption | 0.5 %p. 1: Water Absorption (23℃/24h) ISO 62 % | ISO 62As the sheet prints it: 23℃/24h ISO 62 | |
| Melt mass-flow rate | 4-8 g/10minp. 1: Melt Flow Rate (MFR) (190℃/2.16Kg) ISO 1133 g/10min | ISO 1133As the sheet prints it: MFR 190℃/2.16Kg ISO 1133 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- 25–40 °Cown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190~230℃ (220℃ recommended); Bed Room temperature~60℃ (40℃ recommended); Chamber Room temperature~40℃Flashforge, Technical Data Sheet PLA Matte Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 2: Build Surface Material; p. 2: Nozzle Diameter (recommended printing settings)
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Benefits
It offers excellent bending strength and rigidity, is easy to print, and outputs a matte surface finish, with the ability to be printable on various FFF 3D printers.
Flashforge, Technical Data Sheet PLA Matte Filamentp. 1 - Benefits
Matte finish/Easy to print/High rigidity
Flashforge, Technical Data Sheet PLA Matte Filamentp. 1 - Supports and removal
Support Material Self-supporting, PVA, BVOH
Flashforge, Technical Data Sheet PLA Matte Filamentp. 2 - Benefits
toughened matte polylactic acid modified material
Flashforge, Technical Data Sheet PLA Matte Filamentp. 1
Flashforge PLA MulticolorStrength XY, MPa45Strength Z, MPa—Modulus XY, GPa1Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C25–60Chamber, °C25–40Drying, °C, h508 h
Flashforge PLA MulticolorFlashforge
Data sheet shared with Flashforge PLA: their values are one table, recorded once.
Sold as toughened or impact-modified: "strengthened and toughened polylactic acid modified material" (Flashforge, Technical Data Sheet PLA Multicolor Filament, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Flashforge, Technical Data Sheet PLA Multicolor Filament10 values | |||
| Tensile modulus XY | 1000-1100 Mpap. 1: Modulus of Elasticity (X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Tensile strength (yield or break not stated) XY | 45-49 Mpap. 1: Tensile Strength (X-Y) ISO 527 Mpa | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Elongation at break XY | 13.5-15.5 %p. 1: Elongation at Break (X-Y) ISO 527 % | ISO 527print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Flexural strength XY | 69-75 Mpap. 1: Bending Strength (X-Y) ISO 178 Mpa | ISO 178print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | in the median |
| Izod impact strength XY | 4.5-5 KJ/m2p. 1: Izod Impact Strength (X-Y) ISO 180 KJ/m2 | ISO 180print settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100% | not in the median: notch not stated |
| HDT at 0.45 MPa | 53 ℃p. 1: HDT@ 0.455 MPa (66 psi) ISO 75 ℃ | ISO 75As the sheet prints it: 0.455 MPa 66 psi ISO 75 | in the median |
| Continuous service temperature | 50 ℃p. 1: Continuous Service Temperature IEC 60216 ℃ | IEC 60216 | |
| Density | 1.25-1.26 g/cm³p. 1: Density ISO 1183 g/cm³ | ISO 1183 | |
| Water absorption | 0.3 %p. 1: Water Absorption (23℃/24h) ISO 62 % | ISO 62As the sheet prints it: 23℃/24h ISO 62 | |
| Melt mass-flow rate | 4-8 g/10minp. 1: Melt Flow Rate (MFR) (190℃/2.16Kg) ISO 1133 g/10min | ISO 1133As the sheet prints it: MFR 190℃/2.16Kg ISO 1133 | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- 25–40 °Cown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190~220℃ (210℃ recommended); Bed Room temperature~60℃ (40℃ recommended); Chamber Room temperature~40℃Flashforge, Technical Data Sheet PLA Multicolor Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 2: Build Surface Material; p. 2: Nozzle Diameter (recommended printing settings)
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Benefits
Color-changing/Easy to print/Dimensional stability
Flashforge, Technical Data Sheet PLA Multicolor Filamentp. 1 - Surface finish
Models printed with this filament exhibit different colors from different angles.
Flashforge, Technical Data Sheet PLA Multicolor Filamentp. 1 - Supports and removal
Support Material Self-supporting, PVA, BVOH
Flashforge, Technical Data Sheet PLA Multicolor Filamentp. 2 - Benefits
strengthened and toughened polylactic acid modified material
Flashforge, Technical Data Sheet PLA Multicolor Filamentp. 1
Flashforge PLA ProStrength XY, MPa45.5Strength Z, MPa—Modulus XY, GPa0.95Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C25–60Chamber, °C25–40Drying, °C, h508 h
Flashforge PLA ProFlashforge
Sold as toughened or impact-modified: "PLA Pro is a FFF 3D printing filament, which is produced using a specially toughened polylactic acid modified material, and its toughness is twice that of the ordinary PLA filament." (Flashforge, Technical Data Sheet PLA Pro Filament, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Flashforge, Technical Data Sheet PLA Pro Filament10 values | |||
| Tensile modulus XY | 950-1050 Mpap. 1: Modulus of Elasticity (X-Y) ISO 527 Mpa | ISO 527as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | in the median |
| Tensile strength (yield or break not stated) XY | 45.5-49 Mpap. 1: Tensile Strength (X-Y) ISO 527 Mpa | ISO 527as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | in the median |
| Elongation at break XY | 14.5-16.5 %p. 1: Elongation at Break (X-Y) ISO 527 % | ISO 527as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | in the median |
| Flexural strength XY | 73-76 Mpap. 1: Bending Strength (X-Y) ISO 178 Mpa | ISO 178as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | in the median |
| Izod impact strength XY | 9.5-10.5 KJ/m2p. 1: Izod Impact Strength (X-Y) ISO 180 KJ/m2 | ISO 180as printedprint settingsTest Equipment Guider IIs (Flashforge); Nozzle Diameter 0.4mm; Nozzle Temperature 210 °C; Printing Speed 60mm/s; Wall Thickness 1.2mm; Infill 100%; Note: The above test parameter data are obtained from actual printing, and the printed model has not been annealed. | not in the median: notch not stated |
| HDT at 0.45 MPa | 53 ℃p. 1: HDT@ 0.455 MPa (66 psi) ISO 75 ℃ | ISO 75As the sheet prints it: 0.455 MPa 66 psi ISO 75 | in the median |
| Continuous service temperature | 50 ℃p. 1: Continuous Service Temperature IEC 60216 ℃ | IEC 60216 | |
| Density | 1.25-1.26 g/cm3p. 1: Density ISO 1183 g/cm3 | ISO 1183 | |
| Water absorption | 0.3 %p. 1: Water Absorption (23℃/24h) ISO 62 % | ISO 62As the sheet prints it: 23℃/24h ISO 62 | |
| Melt mass-flow rate | 3-6 g/10minp. 1: Melt Index MFR (190℃/2.16Kg) ISO 1133 g/10min | ISO 1133As the sheet prints it: 190℃/2.16Kg ISO 1133 | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 25–60 °Cown data sheet
- Heated chamber
- 25–40 °Cown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190~220℃ (210℃ recommended); Bed Room temperature~60℃ (40℃ recommended); Chamber Room temperature~40℃Flashforge, Technical Data Sheet PLA Pro Filamentp. 2: Recommended printing settings: Nozzle Temperature; p. 2: Ambient Temperature for Printing; p. 2: Build Surface Material; p. 2: Nozzle Diameter (recommended printing settings)
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Benefits
PLA Pro is a FFF 3D printing filament, which is produced using a specially toughened polylactic acid modified material, and its toughness is twice that of the ordinary PLA filament.
Flashforge, Technical Data Sheet PLA Pro Filamentp. 1 - Benefits
PLA Pro has excellent dimensional stability and toughness, no warping, no cracking and easy-to-print property.
Flashforge, Technical Data Sheet PLA Pro Filamentp. 1 - Benefits
Easy-to-print property/Dimensional stability/High toughness/Neat wire arrangement.
Flashforge, Technical Data Sheet PLA Pro Filamentp. 1 - Supports and removal
Recommended Support Material Self-supporting, PVA, BVOH
Flashforge, Technical Data Sheet PLA Pro Filamentp. 2
Fillamentum PLA Crystal ClearStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa3.5Charpy notched, kJ/m²< 5HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C50–60Chamber, °CnoneDrying, °C, h508 h
Fillamentum PLA Crystal ClearFillamentum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fillamentum, PLA Crystal Clear7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3500 MPap. 1: Tensile modulus | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 50 MPap. 1: Tensile strength | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 5 %p. 1: Elongation at break | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 5 kJ/m2p. 1: Charpy impact strength | ISO 179As the sheet prints it: ISO 179-1eA | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 55-60 °Cp. 1: Glass transition temperature | no standard stated | in the median |
| Density | 1,24 g/cm3p. 1: Material density | no standard stated | |
| Melt mass-flow rate | 3 g/10 minp. 1: Melt flow index | ISO 1133As the sheet prints it: ISO 1133-A | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 210–230 °C; Bed 50–60 °CFillamentum, PLA Crystal Clearp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (6)
- Good for
It complies with the requirements for food contact.
Fillamentum, PLA Crystal Clearp. 1 - Benefits
The advantage of this material is that it can be used in 3D printers easily, that it allows a high quality of printing even in tricky details and an excellent lamination of the printed object.
Fillamentum, PLA Crystal Clearp. 1 - Benefits
PLA Crystal Clear is made from material with improved heat resistance in comparison with standard PLA filaments.
Fillamentum, PLA Crystal Clearp. 1 - Benefits
PLA Crystal Clear filament is made of natural ingredients and is easily biodegradable by composting.
Fillamentum, PLA Crystal Clearp. 1 - Surface finish
Thanks to its optical properties, objects printed from this filament have high clarity and gloss.
Fillamentum, PLA Crystal Clearp. 1 - Surface finish
In thin layer, the product excels by its transparency.
Fillamentum, PLA Crystal Clearp. 1
Fillamentum PLA ExtrafillStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C55Price, CAD/kg—Nozzle, °C190–210Bed, °C50–60Chamber, °CnoneDrying, °C, h508 h
Fillamentum PLA ExtrafillFillamentum
Data sheet shared with Spectrum PLA, Spectrum PLA Premium, Spectrum PLA Nature, Spectrum PLA Thermoactive, Spectrum SafeGuard PLA, FormFutura EasyFil ePLA and FormFutura ReFill PLA: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fillamentum, PLA Extrafill10 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3600 MPap. 1: Tensile modulus | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882 | not in the median: measured on film |
| Tensile yield strength orientation not stated | 60 MPap. 1: Tensile strength | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882 | not in the median: measured on film |
| Elongation at break orientation not stated | 6 %p. 1: Elongation at break | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882 | not in the median: measured on film |
| Flexural modulus orientation not stated | 3800 MPap. 1: Flexural modulus | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 83 MPap. 1: Flexural strength | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 16 J/mp. 1: Izod impact strength | ASTM D256tested at 23°Cnotched | not in the median: in J/m |
| HDT at 0.45 MPa | 55 °Cp. 1: Heat distortion temperature | ASTM E2092As the sheet prints it: E2092 0,45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 55-60 °Cp. 1: Glass transition temperature | ASTM D3418 | in the median |
| Density | 1,24 g/cm3p. 1: Material density | ASTM D792 | |
| Melt mass-flow rate | 6 g/10 minp. 1: Melt flow index | ASTM D1238 | |
Print settings
- Nozzle
- 190–210 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredSpectrum PLA Premium's data sheet, shared
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190–210 °C; Bed 50–60 °CFillamentum, PLA Extrafillp. 1: Recommended printing settings; p. 1: Bed adhesive
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Good for
It complies with the require-ments for food contact.
Fillamentum, PLA Extrafillp. 1 - Benefits
The advantage of this material is that it can be used in 3D printers easily, that it allows a high quality of printing even in tricky details and an excellent lamination of the printed object.
Fillamentum, PLA Extrafillp. 1 - Benefits
PLA filament is made of natural ingredients and is easily biodegradable by composting.
Fillamentum, PLA Extrafillp. 1
FormFutura EasyFil ePLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C55Price, CAD/kg—Nozzle, °C185–215Bed, °C0–45Chamber, °CnoneDrying, °C, h508 h
FormFutura EasyFil ePLAFormFutura
Data sheet shared with Spectrum PLA, Fillamentum PLA Extrafill, Spectrum PLA Premium, Spectrum PLA Nature, Spectrum PLA Thermoactive, Spectrum SafeGuard PLA and FormFutura ReFill PLA: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet EasyFil ePLA11 values | |||
| Tensile modulus orientation not stated | 3.5 Gpap. 1: Tensile Modulus | ASTM D882 | not in the median: measured on film |
| Tensile yield strength orientation not stated | 60 MPap. 1: Tensile Stress at Yield | ASTM D882 | not in the median: measured on film |
| Tensile break strength orientation not stated | 53 MPap. 1: Tensile Strength at Break | ASTM D882 | not in the median: measured on film |
| Elongation at break orientation not stated | 6,00 %p. 1: Tensile Elongation | ASTM D882 | not in the median: measured on film |
| Flexural modulus orientation not stated | 3.8 MPaphysically implausiblep. 1: Flexural Modulus | ASTM D790 | not in the median: physically implausible as published |
| Flexural strength orientation not stated | 83 MPap. 1: Flexural Strength | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 16 J/mp. 1: Notched Izod Impact | ASTM D256 | not in the median: in J/m |
| HDT | 55 °Cp. 1: Heat Distortion Temperature | ASTM E2092As the sheet prints it: E2092 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 55-60 °Cp. 1: Glass Transition Temperature | ASTM D3418 | in the median |
| Density | 1.24 g/cm3p. 1: Specific Gravity | ASTM D792 | |
| Melt mass-flow rate | 6 g/10minp. 1: MFR (210°C, 2.16kg) | ASTM D1238As the sheet prints it: 210°C 2.16kg D1238 | |
Print settings
- Nozzle
- 185–215 °CSpectrum PLA Premium's data sheet, shared
- Bed
- 0–45 °CSpectrum PLA Premium's data sheet, shared
- Heated chamber
- not requiredSpectrum PLA Premium's data sheet, shared
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededSpectrum PLA Premium's data sheet, shared
What the maker says (2)
- Good for
Making detailed concept models.
FormFutura, Technical Data Sheet EasyFil ePLAp. 1 - Precision and tolerance
It is also very easy to 3D print with high accuracy and high aesthetic surface quality.
FormFutura, Technical Data Sheet EasyFil ePLAp. 1
FormFutura High Precision PLAStrength XY, MPa68Strength Z, MPa—Modulus XY, GPa2.97Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C30–65Chamber, °CnoneDrying, °C, hdry first
FormFutura High Precision PLAFormFutura
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet High Precision PLA12 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2971 MPap. 1: Tensile modulus (23°C, 1mm/min) | ISO 527As the sheet prints it: 23°C 1mm/min ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 68 MPap. 1: Tensile strength at yield (23°C, 50mm/min) | ISO 527As the sheet prints it: 23°C 50mm/min ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 52 MPap. 1: Tensile strength at break (23°C, 50mm/min) | ISO 527As the sheet prints it: 23°C 50mm/min ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 4,6 %p. 1: Elongation at tensile break (23°C, 50mm/min) | ISO 527As the sheet prints it: 23°C 50mm/min ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 3,3 %p. 1: Elongation at tensile yield (23°C, 50mm/min) | ISO 527As the sheet prints it: 23°C 50mm/min ISO 527 | listed under other properties |
| Flexural strength orientation not stated | 192 MPaphysically implausiblep. 1: Flexural strength | ISO 178 | not in the median: physically implausible as published |
| Flexural strength orientation not stated | 115 MPap. 1: Flexural strength at break | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural elongation at break orientation not stated | 10%p. 1: Strain at flexural break | ISO 178 | listed under other properties |
| Charpy impact strength | 30 kJ/m2p. 1: Charpy unnotched impact strength, 23°C | ISO 179As the sheet prints it: 23°C ISO 179/1eU | not in the median: unnotched |
| Glass transition temperature | 58 °Cp. 1: Glass Transition Temperature | ISO 11357As the sheet prints it: ISO 11357-1 | in the median |
| Density | 1.27 g/cm3p. 1: Density | ISO 1183As the sheet prints it: ISO 1183-1 | |
| Melt mass-flow rate | 2,13 g/10 minp. 1: Melt flow rate, 190°C/2,16kg | ISO 1133As the sheet prints it: 190°C/2 16kg ISO 1133-1 | |
Print settings
- Nozzle
- 190–230 °CBambu Lab Filament Guide
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- required, schedule not statedown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Drying it is recommended to dry the material prior to usage and to 3D print it directly from a dry boxFormFutura, Technical Data Sheet High Precision PLAp. 1: Storage and handling
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
FormFutura’s High Precision PLA is a more dense and resilient PLA filament that is developed for consistent batch-to-batch production via 3D printing.
FormFutura, Technical Data Sheet High Precision PLAp. 1 - Benefits
High Precision PLA filaments are colored RAL specific with a max tolerance of Delta E5.
FormFutura, Technical Data Sheet High Precision PLAp. 1 - Precision and tolerance
3D prints with high detail and surface quality.
FormFutura, Technical Data Sheet High Precision PLAp. 1
FormFutura ReFill PLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C55Price, CAD/kg33Nozzle, °C185–215Bed, °C0–45Chamber, °CnoneDrying, °C, h508 h
FormFutura ReFill PLAFormFutura
Data sheet shared with Spectrum PLA, Fillamentum PLA Extrafill, Spectrum PLA Premium, Spectrum PLA Nature, Spectrum PLA Thermoactive, Spectrum SafeGuard PLA and FormFutura EasyFil ePLA: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet ReFill PLA6 values | |||
| Tensile modulus orientation not stated | 3.5 Gpap. 1: Tensile Modulus | ASTM D882 | not in the median: measured on film |
| Tensile break strength orientation not stated | 53 MPap. 1: Tensile Strength at Break | ASTM D882 | not in the median: measured on film |
| Elongation at break orientation not stated | 6 %p. 1: Tensile Elongation | ASTM D882 | not in the median: measured on film |
| Izod impact strength | 16 J/mp. 1: Notched Izod Impact | ASTM D256 | not in the median: in J/m |
| HDT at 1.8 MPa | 55 °Cp. 1: HDT A | ASTM E2092As the sheet prints it: HDT A E2092 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm3p. 1: Density | no standard stated | |
Print settings
- Nozzle
- 185–215 °CSpectrum PLA Premium's data sheet, shared
- Bed
- 0–45 °CSpectrum PLA Premium's data sheet, shared
- Heated chamber
- not requiredSpectrum PLA Premium's data sheet, shared
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededSpectrum PLA Premium's data sheet, shared
Price
33.3 CAD/kgits one regular price in the sample
1 listing
- DigitMakers: 33.3 CAD/kgFormFutura ReFill PLA - 1.75mm 750g / Signal Black (SKU FFTRA-REFILLPLA-RFPL-175SNBK-00750)in its price; seen 30 Sep 2026
Its document
What the maker says (4)
- Good for
Making detailed concept models.
FormFutura, Technical Data Sheet ReFill PLAp. 1 - Good for
3D printing manufacturing aids.
FormFutura, Technical Data Sheet ReFill PLAp. 1 - Benefits
Very easy to 3D print.
FormFutura, Technical Data Sheet ReFill PLAp. 1 - Benefits
Food contact approved according to EU directives.
FormFutura, Technical Data Sheet ReFill PLAp. 1
Nanovia PLA VXStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa2.31Charpy notched, kJ/m²1.8HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–215Bed, °C60–70Chamber, °C20Drying, °C, h508 h
Nanovia PLA VXNanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia PLA VX : Virucide ISO 21702 : Nanovia7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2315 MPap. 1: Young modulus | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 50 MPap. 1: Break resistance | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 3.30 %p. 1: Elong. at break | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 1.8 kJ/m2p. 1: Charpy notched | ISO 179As the sheet prints it: ISO 179-1eU | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 80-90 °Cphysically implausiblep. 1: HDT at 0,45 MPa | no standard namedAs the sheet prints it: 0,45 MPa | not in the median: physically implausible as published |
| Glass transition temperature | 55 – 60 °Cp. 1: Tg | no standard stated | in the median |
| Density | 1.24 g/cm3p. 1: Density | ASTM D792 | |
Print settings
- Nozzle
- 200–215 °Cown data sheet
- Bed
- 60–70 °Cown data sheet
- Heated chamber
- 20 °Cown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 200 – 215 °C; Bed 60 – 70 °C; Chamber 20 °CNanovia, Nanovia PLA VX : Virucide ISO 21702 : Nanoviap. 1: Recommended printing settings; p. 1: Nozzle (minimum)
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Benefits
Easy to print
Nanovia, Nanovia PLA VX : Virucide ISO 21702 : Nanoviap. 1 - Benefits
This filament limits the spread and risks of biological contaminants, and is certified ISO 21702:2019 .
Nanovia, Nanovia PLA VX : Virucide ISO 21702 : Nanoviap. 1 - Benefits
Food safe
Nanovia, Nanovia PLA VX : Virucide ISO 21702 : Nanoviap. 1 - Surface finish
Do not apply any paint or coating on pieces printed using Nanovia PLA VX, in order to conserve its virucide properties.
Nanovia, Nanovia PLA VX : Virucide ISO 21702 : Nanoviap. 1
Nanovia PLA XRSStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa3.5Charpy notched, kJ/m²1.8HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–240Bed, °C50–70Chamber, °C—Drying, °C, h—
Nanovia PLA XRSNanovia
Modified: undisclosed dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia PLA XRS : X-ray shielding : Nanovia7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3500 MPap. 1: Tensile modulus | ISO 527 | not in the median: added filler or additive |
| Elongation at break orientation not stated | 3.5 %p. 1: Elong. at break | ISO 527 | not in the median: added filler or additive |
| Flexural modulus orientation not stated | 8800 MPap. 1: Flexural Modulus | ISO 527 | not in the median: added filler or additive |
| Charpy impact strength | 1.8 kJ/m2p. 1: Charpy notched | ISO 179As the sheet prints it: ISO 179-1eU | not in the median: added filler or additive |
| Charpy impact strength | 12 kJ/m2p. 1: Charpy full | ISO 179As the sheet prints it: ISO 179-1eA | not in the median: unnotched |
| Glass transition temperature | 55 – 60 °Cp. 1: Tg | no standard stated | not in the median: added filler or additive |
| Density | 1.66 g/cm3p. 1: Density | ISO 1183 | |
| Nanovia, PLA XRS official material safety data sheet1 value | |||
| Glass transition temperature | 58°Cp. 2: Tg | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 50–70 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 210 – 240 °C; Bed 50 – 70 °CNanovia, Nanovia PLA XRS : X-ray shielding : Nanoviap. 1: Recommended printing settings
Price
Not in the price sample.
Its 3 documents
What the maker says (6)
- Benefits
Easy to print
Nanovia, Nanovia PLA XRS : X-ray shielding : Nanoviap. 1 - Benefits
Nanovia PLA XRS allows the 3D printing of radio-opaque parts, without using lead or any toxic materials.
Nanovia, Nanovia PLA XRS : X-ray shielding : Nanoviap. 1 - Benefits
It prints just as easy as Nanovia PLA EF, and is usable on most commercially available 3D printers.
Nanovia, Nanovia PLA XRS : X-ray shielding : Nanoviap. 1 - Pitfalls and limitations
Nanovia PLA XRS is not suited for medial and dental implants.
Nanovia, Nanovia PLA XRS : X-ray shielding : Nanoviap. 1 - Pitfalls and limitations
The x-ray shielding effect depends on the width of the part and its printing settings (infill, orientation, etc…).
Nanovia, Nanovia PLA XRS : X-ray shielding : Nanoviap. 1: Description, shielding limitation - Benefits
The product is approved for food contact.
Nanovia, PLA XRS official material safety data sheetp. 2: Section7.2 safe storage, English column
Chemicals and environment (2)
- Acid resistance: described in words
Strong alkali or acids can degrade the material.
Effect of strong acids · strongNanovia, PLA XRS official material safety data sheetp. 2: Section10.3 possible side reactions - Alkali resistance: described in words
Strong alkali or acids can degrade the material.
Effect of strong alkalis · strongNanovia, PLA XRS official material safety data sheetp. 2: Section10.3 possible side reactions
Spectrum PLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C55Price, CAD/kg—Nozzle, °C185–215Bed, °CnoneChamber, °CnoneDrying, °C, h508 h
Spectrum PLASpectrum
Data sheet shared with Fillamentum PLA Extrafill, Spectrum PLA Premium, Spectrum PLA Nature, Spectrum PLA Thermoactive, Spectrum SafeGuard PLA, FormFutura EasyFil ePLA and FormFutura ReFill PLA: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, Technical Data Sheet PLA Filament6 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 53 Mpap. 1: Tensile Strength | ASTM D882 | not in the median: measured on film |
| Tensile yield strength orientation not stated | 60 Mpap. 1: Tensile Yield Strength | ASTM D882 | not in the median: measured on film |
| Elongation at break orientation not stated | 6 %p. 1: Tensile Elongation | ASTM D882 | not in the median: measured on film |
| Izod impact strength | 16 J/mp. 1: Notched Izod Impact | ASTM D256 | not in the median: in J/m |
| HDT | 55 °Cp. 1: Heat Distortion Temperature | ASTM E2092As the sheet prints it: E2092 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 55-60 °Cp. 1: Glass Transition Temperature | ASTM D3418 | in the median |
Print settings
- Nozzle
- 185–215 °Cown data sheet
- Bed
- not requiredown data sheet
- Heated chamber
- not requiredSpectrum PLA Premium's data sheet, shared
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 185-215°C; Bed not required (45°C recommended)Spectrum, Technical Data Sheet PLA Filamentp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
Spectrum PLA NatureStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C60HDT 1.8, °C55Price, CAD/kg—Nozzle, °C185–215Bed, °C0–45Chamber, °CnoneDrying, °C, h508 h
Spectrum PLA NatureSpectrum
Data sheet shared with Spectrum PLA, Fillamentum PLA Extrafill, Spectrum PLA Premium, Spectrum PLA Thermoactive, Spectrum SafeGuard PLA, FormFutura EasyFil ePLA and FormFutura ReFill PLA: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO2 valuesUnless a row says otherwise: specimen not stated | |||
| HDT | 60°Cp. 4: HDT | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.25 g/cm³p. 4: Density [g/cm³] | no standard stated | |
Print settings
- Nozzle
- 185–215 °Cown data sheet
- Bed
- 0–45 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Spectrum, PLA Nature.
Its 2 print profiles, in the documents' words
- Nozzle 185-230°C; Bed 0-50°CSpectrum, PLA Naturep. 1: Nozzle temperature [°C]; p. 1: Bed temperature [°C]; p. 1: Enclosure; p. 1: Drybox recommended; p. 1: Ruby or hardened nozzle recommended; p. 1: Adhesive
- Nozzle 185-215°C; Bed 0-45°CSpectrum, KARTA TECHNICZNA PLA Naturep. 1: Temperatura dyszy; p. 1: Temperatura stołu; p. 1: Suszarka do filamentu; p. 1: * ustawienia oparto na dyszy o średnicy 0,4 mm
Price
Not in the price sample.
Its 4 documents
What the maker says (17)
- Warping and shrinkage
Filaments from the PLA Nature series are characterized by ease of printing, unique textures and colors and low shrinkage.
Spectrum, PLA Naturep. 1 - Benefits
Bio-filler, unique texture, ease of printing, made of biodegradable raw materials
Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 3 - Surface finish
The PLA Nature series was designed with the intention of creating new textures in 3D printing materials through the use of bio-fillers.
Spectrum, PLA Naturep. 1 - Surface finish
A significant presence of visible bio-filler in PLA Nature filaments is a unique feature compared to the traditional PLA material.
Spectrum, PLA Naturep. 1 - Printing advice
The printed model can also undergo a post-print heat treatment process, thereby increasing its heat resistance.
Spectrum, PLA Naturep. 1 - Benefits
The particle size of the natural fillers used in production has been specially reduced to increase their presence in the filament and enable printing on a much wider range of devices using standard PLA settings.
Spectrum, PLA Naturep. 1 - Surface finish
unique texture
Spectrum, PLA Naturep. 1 - Benefits
ease of printing
Spectrum, PLA Naturep. 1 - Benefits
made of biodegradable raw materials
Spectrum, PLA Naturep. 1 - Good for
educational projects
Spectrum, PLA Naturep. 1 - Good for
concept and demo prototyping
Spectrum, PLA Naturep. 1 - Good for
industrial design
Spectrum, PLA Naturep. 1 - Good for
interior design
Spectrum, PLA Naturep. 1 - Printing advice
Enclosure not necessary
Spectrum, PLA Naturep. 1 - Moisture sensitivity
Drybox recommended: No
Spectrum, PLA Naturep. 1 - Nozzle wear
Ruby or hardened nozzle recommended: No
Spectrum, PLA Naturep. 1 - Printing advice
Adhesive not necessary (for increased adhesion or to prevent warping: Dimafix, 3DLac, Magigoo)
Spectrum, PLA Naturep. 1
Spectrum PLA PremiumStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C55Price, CAD/kg35Nozzle, °C185–215Bed, °C0–45Chamber, °CnoneDrying, °C, h508 h
Spectrum PLA PremiumSpectrum
Data sheet shared with Spectrum PLA, Fillamentum PLA Extrafill, Spectrum PLA Nature, Spectrum PLA Thermoactive, Spectrum SafeGuard PLA, FormFutura EasyFil ePLA and FormFutura ReFill PLA: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET PLA Premium11 values | |||
| Tensile modulus orientation not stated | 3.5 Gpap. 1: Tensile Modulus | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
| Tensile yield strength orientation not stated | 60 MPap. 1: Tensile Yield Strength | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
| Tensile break strength orientation not stated | 53 MPap. 1: Tensile Strength at Break | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
| Elongation at break orientation not stated | 6,00 %p. 1: Tensile Elongation | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
| Flexural modulus orientation not stated | 3.8 MPaphysically implausiblep. 1: Flexural Modulus | ASTM D790As the sheet prints it: D790 | not in the median: physically implausible as published |
| Flexural strength orientation not stated | 83 MPap. 1: Flexural Strength | ASTM D790As the sheet prints it: D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 16 J/mp. 1: Notched Izod Impact | ASTM D256As the sheet prints it: D 256 | not in the median: in J/m |
| HDT | 55 °Cp. 1: Heat Distortion Temperature | ASTM E2092As the sheet prints it: E 2092 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 55-60 °Cp. 1: Glass Transition Temperature | ASTM D3418As the sheet prints it: D3418 | in the median |
| Density | 1.24 g/cm3p. 1: Specific Gravity | ASTM D792As the sheet prints it: D 792 | |
| Melt mass-flow rate | 6 g/10minp. 1: MFR (210°C, 2.16kg) | ASTM D1238As the sheet prints it: 210°C 2.16kg D 1238 | |
| Spectrum, TECHNICAL DATA SHEET SafeGuard PLA1 value | |||
| Izod impact strength orientation not stated | 16 J/mp. 1: Notched Izod Impact | ASTM D256As the sheet prints it: D 256 | not in the median: in J/m |
Print settings
- Nozzle
- 185–215 °Cown data sheet
- Bed
- 0–45 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 185-215°C; Bed 0-45°CSpectrum, TECHNICAL DATA SHEET PLA Premiump. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box; p. 1: settings footnote
- Nozzle 185-215 °C; Bed 0-45 °C; Chamber not necessarySpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Nozzle temp. [°C]; p. 4: Bed temp. [°C]; p. 4: Closed chamber for printing; p. 4: Dry box recommended; p. 4: Ruby or hardened nozzle recommended; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
Price
35 CAD/kgits one regular price in the sample
1 listing
- 3D Printing Canada: 35 CAD/kgBahama Yellow - Spectrum Premium PLA Filament - 1.75mm, 1kg (SKU 67bbb9cfbafbd)in its price; seen 30 Sep 2026
Its 5 documents
What the maker says (7)
- Benefits
made of biodegradable raw materials
Spectrum, TECHNICAL DATA SHEET PLA Premiump. 1 - Benefits
It shows full biodegradability.
Spectrum, TECHNICAL DATA SHEET PLA Premiump. 1 - Benefits
The choice of an appropriate dye base for the pellets for filament extrusion ensures a highly efficient printing with an extremely good adhesion of printed items to the build beds of FDM/FFF 3D printers.
Spectrum, TECHNICAL DATA SHEET PLA Premiump. 1 - Surface finish
high aesthetic surface quality
Spectrum, TECHNICAL DATA SHEET PLA Premiump. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET PLA Premiump. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET PLA Premiump. 1 - Benefits
High quality PLA, biodegradable, user friendly, very wide range of colors
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20
Spectrum PLA ThermoactiveStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C55Price, CAD/kg—Nozzle, °C190–220Bed, °C0–45Chamber, °CnoneDrying, °C, h508 h
Spectrum PLA ThermoactiveSpectrum
Data sheet shared with Spectrum PLA, Fillamentum PLA Extrafill, Spectrum PLA Premium, Spectrum PLA Nature, Spectrum SafeGuard PLA, FormFutura EasyFil ePLA and FormFutura ReFill PLA: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 0–45 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 190-220°C; Bed 0-45°CSpectrum, TECHNICAL DATA SHEET PLA Thermoactivep. 1: Bed temperature, Closed chamber, Nozzle note; p. 1: Dry box; p. 1: settings footnote
Price
Not in the price sample.
Its 2 documents
What the maker says (6)
- Benefits
The colour changes from red to cream once the surface temperature of the item exceeds 30°C. The previous colour is restored gradually once the item reaches its initial temperature.
Spectrum, TECHNICAL DATA SHEET PLA Thermoactivep. 1 - Warping and shrinkage
no shrinkage after cooling
Spectrum, TECHNICAL DATA SHEET PLA Thermoactivep. 1 - Warping and shrinkage
warp-free printing
Spectrum, TECHNICAL DATA SHEET PLA Thermoactivep. 1 - Surface finish
high aesthetic surface quality
Spectrum, TECHNICAL DATA SHEET PLA Thermoactivep. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET PLA Thermoactivep. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET PLA Thermoactivep. 1
Spectrum SafeGuard PLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C55Price, CAD/kg—Nozzle, °C185–215Bed, °C0–45Chamber, °CnoneDrying, °C, h508 h
Spectrum SafeGuard PLASpectrum
Data sheet shared with Spectrum PLA, Fillamentum PLA Extrafill, Spectrum PLA Premium, Spectrum PLA Nature, Spectrum PLA Thermoactive, FormFutura EasyFil ePLA and FormFutura ReFill PLA: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 185–215 °Cown data sheet
- Bed
- 0–45 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 185-215°C; Bed 0-45°CSpectrum, TECHNICAL DATA SHEET SafeGuard PLAp. 1: Closed chamber, Ruby or hardened nozzle; p. 1: Dry box; p. 1: Adhesive; p. 1: settings footnote
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
SafeGuard PLA is an advanced antibacterial 3D printing filament designed to protect surfaces from harmful microbes, viruses, biofilm, fouling and mold.
Spectrum, TECHNICAL DATA SHEET SafeGuard PLAp. 1 - Moisture sensitivity
Dry box No
Spectrum, TECHNICAL DATA SHEET SafeGuard PLAp. 1 - Nozzle wear
Ruby or hardened nozzle No
Spectrum, TECHNICAL DATA SHEET SafeGuard PLAp. 1
FormFutura Volcano PLAStrength XY, MPa39Strength Z, MPa—Modulus XY, GPa3.9Charpy notched, kJ/m²22HDT 0.45, °C> 95HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–255Bed, °C30–65Chamber, °CnoneDrying, °C, h508 h
FormFutura Volcano PLAFormFutura
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet Volcano PLA8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3900 Mpap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 39 Mpap. 1: Tensile strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 58 %p. 1: Elongation at break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 22 KJ/m²p. 1: Impact strength | ISO 179tested at 23° Cnotched | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT | ≥ 95°C After annealingp. 1: Viscat softening temp. | ISO 75annealed at a temperature its sheet does not state for a time its sheet does not stateAfter annealing | not in the median: set apart (never used to pass), test bar not described as printed |
| Melting temperature | 190 - 220° C °Cp. 1: Melting termperature | no standard stated | |
| Density | 1.27 g/ccp. 1: Specific gravity | ASTM D792 | |
| Melt mass-flow rate | 6 g/10 minp. 1: Melt flow rate | ISO 1133 | |
Print settings
- Nozzle
- 220–255 °Cown data sheet
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
- Annealing
- temperature not statedown data sheet
Its print profile, in the documents' words
- Nozzle ± 220 - 255° CFormFutura, Technical Data Sheet Volcano PLAp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
Volcano PLA is an industrial grade PLA which is engineered for professional applications that require high printing speeds and improved heat resistance and mechanical properties similar to ABS.
FormFutura, Technical Data Sheet Volcano PLAp. 1 - Benefits
Volcano PLA offers the same mechanical and thermal properties - after annealing - as most ABS filaments, but with the biodegradability and ease of printing of PLA.
FormFutura, Technical Data Sheet Volcano PLAp. 1
iSANMATE PLA+ i6Strength XY, MPa52.3Strength Z, MPa—Modulus XY, GPa1.44Charpy notched, kJ/m²—HDT 0.45, °C54HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–240Bed, °C45–55Chamber, °CnoneDrying, °C, h505–8 h
iSANMATE PLA+ i6iSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, PLA+ i6 Filament Technical Data Sheet7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 1438.72 MPap. 1: Tensile modulus MPa | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 52.26 MPap. 1: Tensile Strength | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 5.81 %p. 1: Elongation At Break | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 86.85 MPap. 1: Bending strength MPa | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT | 53.8 ℃p. 1: Heat Deflection Temperature | printed specimen (implied by the document), DSC | not in the median: set apart (never used to pass), no stated test load |
| Vicat softening temperature | 52.6 ℃p. 1: Vicat Softening Point A/120 ℃ | ASTM D1525As the sheet prints it: 120 ASTM D1525 | |
| Density | 1.28 g/cm3p. 1: Density | ASTM D792 | |
Print settings
- Nozzle
- 200–240 °Cown data sheet
- Bed
- 45–55 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 50 °C for 5–8 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 200-240 ℃; Bed 45-55 ℃; Drying Blower type oven: 50℃,5-8HiSANMATE, PLA+ i6 Filament Technical Data Sheetp. 1: Recommended printing settings; p. 1: Dry before use: Blower type oven; p. 1: Applicable print panel/bed temperature; p. 1: Print head
Price
Not in the price sample.
Its 2 documents
What the maker says (6)
- Good for
Rapid prototyping, architectural models, product design
iSANMATE, PLA+ i6 Filament Technical Data Sheetp. 1 - Benefits
Cost-effective high-speed PLA is optimized for high-speed printing, supporting an extrusion speed of up to 300mm/s, significantly shortening the printing time.
iSANMATE, PLA+ i6 Filament Technical Data Sheetp. 1 - Benefits
The modified formula improves melt fluidity, reduces extrusion resistance at high speeds, avoids material breakage or under-extrusion, and improves the temperature resistance of the printed model.
iSANMATE, PLA+ i6 Filament Technical Data Sheetp. 1 - Benefits
Low-temperature adaptability, energy saving and extended nozzle life.
iSANMATE, PLA+ i6 Filament Technical Data Sheetp. 1 - Adhesion between layers
High-speed compatibility, strong interlayer adhesion.
iSANMATE, PLA+ i6 Filament Technical Data Sheetp. 1 - Odour and emissions
Environmentally friendly and safe, no odor.
iSANMATE, PLA+ i6 Filament Technical Data Sheetp. 1
Jamg He PLA+Strength XY, MPa62Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C54HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C45–60Chamber, °CnoneDrying, °C, h508 h
Jamg He PLA+Jamg He
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Filament2Print, Technical Data Sheet PLA+ Filament7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 62±10% MPap. 3: Tensile strength (MPa) | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 21.5 ± 10 %p. 3: Elongation at break (%) | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 1925±10% MPap. 3: Flexural modulus(MPa) | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 76±10% MPap. 3: Maximum bending strength (MPa) | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 54 °Cp. 3: Heat deflection (HDT) at 0.455 MPa | no standard namedAs the sheet prints it: 0.455 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.23~1.25 g/cm³p. 2: Density | no standard statedtested at 25℃ | |
| Melt mass-flow rate | 5.5g/10minp. 2: Melt mass-flow rate (MFR) | no standard namedAs the sheet prints it: 2.16Kg | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 200 -230 °C; Bed 45-60 ºCFilament2Print, Technical Data Sheet PLA+ Filamentp. 2: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (6)
- Good for
Print daily accessories, decorations, toys, sculptures, artwork, functional parts for shells, and more.
Filament2Print, Technical Data Sheet PLA+ Filamentp. 1 - Warping and shrinkage
no warping
Filament2Print, Technical Data Sheet PLA+ Filamentp. 2 - Warping and shrinkage
Low shrinkage and good performance even when printing large models.
Filament2Print, Technical Data Sheet PLA+ Filamentp. 2 - Precision and tolerance
high precision
Filament2Print, Technical Data Sheet PLA+ Filamentp. 2 - Surface finish
the finished product is smooth and delicate
Filament2Print, Technical Data Sheet PLA+ Filamentp. 2 - Odour and emissions
Low odor
Filament2Print, Technical Data Sheet PLA+ Filamentp. 2
Recreus PLA PurifierStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa3.06Charpy notched, kJ/m²6.3HDT 0.45, °C—HDT 1.8, °C45Price, CAD/kg—Nozzle, °C215–225Bed, °C40–60Chamber, °C—Drying, °C, h—
Recreus PLA PurifierRecreus
Modified: undisclosed dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Recreus, TECHNICAL DATA SHEET PLA Purifier8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3060 MPap. 1: Tensile modulus (Young) | ISO 527 | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) orientation not stated | 12,6 MPaphysically implausiblep. 1: Tensile strength | ISO 527 | not in the median: physically implausible as published |
| Elongation at break orientation not stated | 36 %p. 1: Elongation at break | ISO 527 | not in the median: added filler or additive |
| Flexural modulus orientation not stated | 3000 MPap. 1: MEF Flexural Modulus Elasticity | ISO 178 | not in the median: added filler or additive |
| Charpy impact strength orientation not stated | 6,3 kJ/m2p. 1: Notched impact strengh (Charpy)n at +23ºC | ISO 179tested at +23ºC | not in the median: added filler or additive |
| Charpy impact strength orientation not stated | 4,5 kJ/m2p. 1: Notched impact strengh (Charpy)n at -30ºC | ISO 179tested at -30ºC | not in the median: tested below room temperature |
| HDT at 1.8 MPa | 45 °Cp. 1: HDT (01,82MPa) | ISO 75As the sheet prints it: 01,82MPa ISO 75-2 | not in the median: added filler or additive |
| Density | 1,42 g/cm3p. 1: Material density | ISO 1183 | |
Print settings
- Nozzle
- 215–225 °Cown data sheet
- Bed
- 40–60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle 215 - 225°C; Bed 40-60°CRecreus, TECHNICAL DATA SHEET PLA Purifierp. 1: bed temperature
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Benefits
Recreus PLA Purifier is a compound based on polylactic acid and belongs to the family of thermoplastic polyesters derived from renewable resources which includes an innovative component that mineralises VOCs generated by air pollution.
Recreus, TECHNICAL DATA SHEET PLA Purifierp. 1
Spectrum Pastello PLAStrength XY, MPa38Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C59HDT 1.8, °C53Price, CAD/kg—Nozzle, °C185–215Bed, °C0–60Chamber, °CnoneDrying, °C, h508 h
Spectrum Pastello PLASpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET Pastello PLA7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile yield strength orientation not stated | 38 MPap. 1: Tensile strength at Yield | ASTM D638As the sheet prints it: D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 10 %p. 1: Elongation at break | ASTM D638As the sheet prints it: D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2350 MPap. 1: Flexural Modulus | ASTM D790As the sheet prints it: D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 50 J/mp. 1: Izod notched | ASTM D256As the sheet prints it: D256 | not in the median: in J/m |
| HDT at 0.45 MPa | 59 °Cp. 1: Heat Deflection Temperature 0.45 Mpa | ASTM D648As the sheet prints it: 0.45 Mpa D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 53 °Cp. 1: Heat Deflection Temperature 1.8 Mpa | ASTM D648As the sheet prints it: 1.8 Mpa D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.30 g/cm3p. 1: Density | ASTM D792As the sheet prints it: D792 | |
| Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO1 value | |||
| HDT | 59°Cp. 4: HDT | no standard stated | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 185–215 °Cown data sheet
- Bed
- 0–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 185 - 215°C; Bed 0 - 60°CSpectrum, TECHNICAL DATA SHEET Pastello PLAp. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box
- Nozzle 185-215 °C; Bed 0-60 °C; Chamber not necessarySpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Nozzle temp. [°C]; p. 4: Bed temp. [°C]; p. 4: Closed chamber for printing; p. 4: Dry box recommended; p. 4: Ruby or hardened nozzle recommended; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended; p. 23: Adhesive
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- 3D Printing Canada: 24 per kg, sale priceWater Blue - Spectrum Pastello PLA Filament - 1.75mm, 1kg (SKU 5903175654847)not used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 4 documents
What the maker says (7)
- Benefits
easy to print
Spectrum, TECHNICAL DATA SHEET Pastello PLAp. 1 - Benefits
Additionally, Pastello PLA contains recycled material, making your projects a real contribution to protecting our planet.
Spectrum, TECHNICAL DATA SHEET Pastello PLAp. 1 - Surface finish
unique matte print finish
Spectrum, TECHNICAL DATA SHEET Pastello PLAp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET Pastello PLAp. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET Pastello PLAp. 1 - Benefits
Beautiful pastel shades, unique matte print finish, eco-friendly cardboard spool, recycled content
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20 - Surface finish
Beautiful pastel shades, unique matte print finish
Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 3
Spectrum PLA CrystalStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa3.5Charpy notched, kJ/m²5HDT 0.45, °C60HDT 1.8, °C—Price, CAD/kg32Nozzle, °C185–215Bed, °C0–45Chamber, °CnoneDrying, °C, h508 h
Spectrum PLA CrystalSpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET PLA Crystal7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3500 MPap. 1: Tensile Modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 50 Mpap. 1: Tensile Strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 5,00 %p. 1: Elongation at Break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 5 kJ/m2p. 1: Charpy notched impact strength, 23°C | ISO 527As the sheet prints it: 23°C ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 60 °Cp. 1: Heat deflection temperature (0.45MPa) | ISO 75As the sheet prints it: 0.45MPa ISO 75-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm3p. 1: Density | no standard stated | |
| Melt mass-flow rate | 8 g/10minp. 1: MFR (210°C, 2.16kg) | ISO 1133As the sheet prints it: 210°C 2.16kg ISO 1133-A | |
| Spectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIO1 value | |||
| HDT | 60°Cp. 4: HDT | no standard stated | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 185–215 °Cown data sheet
- Bed
- 0–45 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 185 - 215°C; Bed 0 - 45°CSpectrum, TECHNICAL DATA SHEET PLA Crystalp. 1: Recommended printing settings; p. 1: Nozzle note
- Nozzle 185-215 °C; Bed 0-45 °C; Chamber not necessarySpectrum, 3D Printing Filament Manufacturer PRODUCT PORTFOLIOp. 4: Nozzle temp. [°C]; p. 4: Bed temp. [°C]; p. 4: Closed chamber for printing; p. 4: Dry box recommended; p. 4: Ruby or hardened nozzle recommended; p. 4: Adhesive
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended; p. 23: Adhesive
Price
32 CAD/kgits one regular price in the sample
1 listing
- 3D Printing Canada: 32 CAD/kgElectric Yellow - Spectrum PLA Crystal - 1.75mm, 1kg (SKU 5903175659453)in its price; seen 30 Sep 2026
Its 4 documents
What the maker says (6)
- Benefits
made of biodegradable raw materials
Spectrum, TECHNICAL DATA SHEET PLA Crystalp. 1 - Benefits
Crafted from highly crystalline PLA, these filaments offer exceptional clarity and aesthetics, setting them apart from traditional non-transparent PLA.
Spectrum, TECHNICAL DATA SHEET PLA Crystalp. 1 - Benefits
With nearly 30% improved flow rates, they enable smoother and more precise 3D printing.
Spectrum, TECHNICAL DATA SHEET PLA Crystalp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET PLA Crystalp. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET PLA Crystalp. 1 - Benefits
Transparent, semi-crystalline prints; increased flow rate; temperature resistance up to 60°C
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20
Spectrum PLA High SpeedStrength XY, MPa51Strength Z, MPa—Modulus XY, GPa3.55Charpy notched, kJ/m²5HDT 0.45, °C60HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–215Bed, °C0–60Chamber, °CnoneDrying, °C, h508 h
Spectrum PLA High SpeedSpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET PLA High Speed7 valuesThe same values also in Spectrum, KARTA TECHNICZNA PLA High Speed.Unless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3550 MPap. 1: Tensile Modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 51 MPap. 1: Tensile Strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 5,00 %p. 1: Elongation at Break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 5 kJ/m2p. 1: Charpy notched impact strength, 23°C | ISO 179As the sheet prints it: 23°C ISO 179-1eA | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 60 °Cp. 1: Heat deflection temperature (0.45MPa) | ISO 75As the sheet prints it: 0.45MPa ISO 75-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm3p. 1: Density | no standard stated | |
| Melt mass-flow rate | 70 g/10minp. 1: MFR (210°C, 2.16kg)also in Spectrum, KARTA TECHNICZNA PLA High Speed | ISO 1133As the sheet prints it: 210°C 2.16kg ISO 1133-A | |
| Spectrum, KARTA TECHNICZNA PLA High Speed1 value | |||
| Charpy impact strength orientation not stated | 5 kJ/m²p. 1: Udarność Charpy’ego z karbem, 23°C | ISO 179As the sheet prints it: ISO 179-1eA | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 190–215 °Cown data sheet
- Bed
- 0–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 190 - 215°C; Bed 0 - 60°CSpectrum, TECHNICAL DATA SHEET PLA High Speedp. 1: Recommended printing settings: Nozzle temperature - standard speed; p. 1: Nozzle note; p. 1: Dry box; p. 1: * settings are based on a 0,4 mm nozzle.
- Nozzle 225 - 250°C; Bed 0 - 60°CSpectrum, TECHNICAL DATA SHEET PLA High Speedp. 1: Recommended printing settings: Nozzle temperature - high speed; p. 1: Dry box; p. 1: * settings are based on a 0,4 mm nozzle.
- Nozzle 190 - 215°C; Bed 0 - 60°CSpectrum, KARTA TECHNICZNA PLA High Speedp. 1: Temperatura dyszy - druk standardowy; p. 1: Temperatura stołu; p. 1: Suszarka do filamentu; p. 1: * ustawienia oparto na dyszy o średnicy 0,4 mm
Price
Not in the price sample.
Its 3 documents
What the maker says (6)
- Benefits
ease of printing
Spectrum, TECHNICAL DATA SHEET PLA High Speedp. 1 - Benefits
Premium PLA High Speed is the latest filament enabling fast 3D printing - thanks to it you can obtain exceptional print quality at a speed of up to 600 mm/s.
Spectrum, TECHNICAL DATA SHEET PLA High Speedp. 1 - Benefits
manufactured from fully biodegradable raw materials
Spectrum, TECHNICAL DATA SHEET PLA High Speedp. 1 - Surface finish
high aesthetics of the final print surface
Spectrum, TECHNICAL DATA SHEET PLA High Speedp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET PLA High Speedp. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET PLA High Speedp. 1
Yousu Modified PLAStrength XY, MPa60Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C65Price, CAD/kg—Nozzle, °C190–240Bed, °C60Chamber, °CnoneDrying, °C, h508 h
Yousu Modified PLAYousu
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Yousu, YOUSU Modified PLA 3D FILMAENT Technical Data Sheet8 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 60 MPap. 1: Tensile Strength | ASTM D638As the sheet prints it: ASTM D638; rate=50mm/min | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 6 %p. 1: Elongation | ASTM D638As the sheet prints it: ASTM D638; rate=50mm/min | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 3000 MPap. 1: FlexuralModulus | ASTM D790As the sheet prints it: ASTM D790; rate=2mm/min | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 90 MPap. 1: Flexural Strength | ASTM D790As the sheet prints it: ASTM D790; rate=2mm/min | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 1.8 MPa | 65 ℃p. 1: Heat Distortion Temp. | ASTM D648As the sheet prints it: ASTM D648; 1.8MPa; thickness=6.4mm | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.23 g/cm3p. 1: Density | ASTM D792tested at 23℃ | |
| Melt mass-flow rate | 6 g/10minp. 1: Melt Flow Rate | ASTM D1238As the sheet prints it: ASTM D1238; 2.16Kg | |
| Mould shrinkage orientation not stated | 0.4-0.6 %p. 1: Mold Shrinkage | ASTM D955tested at 23℃ | |
Print settings
- Nozzle
- 190–240 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-240℃; Bed None needed(or 60℃ if applicable)Yousu, YOUSU Modified PLA 3D FILMAENT Technical Data Sheetp. 1: Printing Temp, Bed Temp
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Warping and shrinkage
Mold Shrinkage D955 % 23℃ 0.4-0.6
Yousu, YOUSU Modified PLA 3D FILMAENT Technical Data Sheetp. 1
colorFabb stoneFillStrength XY, MPa43Strength Z, MPa—Modulus XY, GPa3.33Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C50–60Chamber, °CnoneDrying, °C, hdry first
colorFabb stoneFillcolorFabb
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
colorFabb, Technical datasheet stoneFill12 valuesUnless a row says otherwise: printed specimenprint settingsXY plane, 0.15mm layerheight, 100% infill, 0.4mm nozzle, 210 °C nozzle temperature and 55 °C bed temperature | |||
| Tensile modulus XY | 3325 MPap. 1: Tensile modulus MPa | ISO 527 | in the median |
| Tensile strength (yield or break not stated) XY | 43 MPap. 1: Tensile strength MPa | ISO 527 | in the median |
| Tensile yield strength XY | 43 MPap. 1: Yield strength MPa | ISO 527 | not in the median: another value of this product is in it |
| Tensile break strength XY | 42 MPap. 1: Tensile stress at break MPa | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break XY | 3,7 %p. 1: Tensile strain at break % | ISO 527 | in the median |
| Elongation at yield XY | 2,4 %p. 1: Yield strain % | ISO 527 | listed under other properties |
| Tensile strain at strength XY | 2,4 %p. 1: Tensile strain at tensile strength % | ISO 527 | listed under other properties |
| Flexural modulus XY | 2947 MPap. 1: Flexural modulus MPa | ISO 178 | in the median |
| Flexural strength XY | 82 MPap. 1: Flexural strength MPa | ISO 178 | in the median |
| Flexural strength XY | 46 MPap. 1: Flexural stress at break MPa | ISO 178 | not in the median: another value of this product is in it |
| Flexural elongation at break XY | 6,1 %p. 1: Flexural strain at break % | ISO 178 | listed under other properties |
| Flexural stress at conventional deflection XY | 79 MPap. 1: Flexural strain at standard deflection | ISO 178print settings not stated | listed under other properties |
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- required, schedule not statedown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 195 - 220°C; Bed 50 - 60°CcolorFabb, Technical datasheet stoneFillp. 2: Recommended printing settings
- Nozzle 195-220C*; Bed 50-60C; Drying Requires drying from time to time to reduce stringing and oozing.colorFabb, stoneFill Moss Green – Matte PLA Filament with Stone Texture | colorFabbp. 1: Advised 3D printing temperature; p. 1: Advised Heated bed; p. 1: Cons
Price
Not in the price sample.
Its 3 documents
What the maker says (8)
- Benefits
Using the same material formulation as the other stoneFill colors, Moss Green is easy to work with and a joy to print!
colorFabb, stoneFill Moss Green – Matte PLA Filament with Stone Texture | colorFabbp. 1 - Surface finish
Top surfaces and walls look nearly identical.
colorFabb, stoneFill Moss Green – Matte PLA Filament with Stone Texture | colorFabbp. 1 - Surface finish
Matte finish.
colorFabb, stoneFill Moss Green – Matte PLA Filament with Stone Texture | colorFabbp. 1 - Surface finish
Hides layer lines extremely well.
colorFabb, stoneFill Moss Green – Matte PLA Filament with Stone Texture | colorFabbp. 1 - Surface finish
Not exactly a stone look material like it’s siblings stoneFill Light Gray and stoneFill Red Brick, but a realistic moss or grass like surface.
colorFabb, stoneFill Moss Green – Matte PLA Filament with Stone Texture | colorFabbp. 1 - Moisture sensitivity
Requires drying from time to time to reduce stringing and oozing.
colorFabb, stoneFill Moss Green – Matte PLA Filament with Stone Texture | colorFabbp. 1 - Benefits
The key difference with many other filaments is that our formulation does not incorporate ‘stone powder’, which makes this filament easy to work with and a joy to print!
colorFabb, Technical datasheet stoneFillp. 1 - Surface finish
Our fully biobased formulation of stoneFill mimics stone surfaces really well.
colorFabb, Technical datasheet stoneFillp. 1
3DJake ecoPLAStrength XY, MPa45Strength Z, MPa—Modulus XY, GPa3.5Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–215Bed, °C35–60Chamber, °CnoneDrying, °C, h508 h
3DJake ecoPLA3DJake
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3DJake, Technical Data Sheet 3DJAKE ecoPLA7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3500 MPap. 1: Tensile modulus | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 45 MPap. 1: Tensile strength | ISO 527As the sheet prints it: ISO 527-1 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 5 %p. 1: Elongation at break | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 60 °Cp. 1: Glass transition temp. | no standard stated | in the median |
| Melting temperature | 155 °Cp. 1: Melting temperature | no standard stated | |
| Density | 1,24 g/ccp. 1: Specific gravity | no standard stated | |
| Melt mass-flow rate | 6 g/10 minp. 1: MFR 210 °C/2,16kg | ISO 1133As the sheet prints it: 210 °C/2 16kg ISO 1133-A | |
Print settings
- Nozzle
- 195–215 °Cown data sheet
- Bed
- 35–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 205 ± 10 °C; Bed If you have a heated bed the recommended temperature is ± 35-60˚C3DJake, Technical Data Sheet 3DJAKE ecoPLAp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Warping and shrinkage
Due to its low tendency to warp 3DJAKE ecoPLA Matt can also be printed without a heated bed.
3DJake, Technical Data Sheet 3DJAKE ecoPLAp. 1
Fiberlogy MATTE PLAStrength XY, MPa41Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C60Chamber, °CnoneDrying, °C, h504 h
Fiberlogy MATTE PLAFiberlogy
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy MATTE PLA4 values | |||
| Tensile yield strength orientation not stated | 41 MPap. 1: Tensile Strength @ Yield ASTM D882 MPa | ASTM D882 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 4 %p. 1: Elongation @ Yield ASTM D882 % | ASTM D882 | listed under other properties |
| Flexural strength orientation not stated | 48 MPap. 1: Flexular Strength ASTM D790 MPa | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Melting temperature | 145-160 °Cp. 1: Melting Temperature Tm ASTM D3418 °C | ASTM D3418 | |
| Fiberlogy, Matte PLA Filament3 valuesUnless a row says otherwise: specimen not stated | |||
| HDT at 0.45 MPa | 55°Cp. 1: Heat deflection temperature under load @ 0.45 MPa | ASTM D648As the sheet prints it: ASTM D648; 0.45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 55–60°Cp. 1: Glass transition temperature | DSC | in the median |
| Density | 1.24 g/cm³p. 1: Density | no standard stated | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °C for 4 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 200°C - 230°C; Bed 60°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy MATTE PLAp. 1: Recommended printing settings
- Nozzle nozzle temperature 200–230°C; Bed build plate 60°C; Drying 50°C / 4 hoursFiberlogy, Matte PLA Filamentp. 1: Print parameters (description); p. 1: Print parameters (description); p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber
Price
Not in the price sample.
Its 3 documents
What the maker says (1)
- Surface finish
unique matte finish, which effectively hides visible print layers
Fiberlogy, Matte PLA Filamentp. 1
Fabru Polylactid+ (PLA+)Strength XY, MPa54Strength Z, MPa—Modulus XY, GPa2.84Charpy notched, kJ/m²—HDT 0.45, °C90HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–250Bed, °C70–90Chamber, °CnoneDrying, °C, h604 h
Fabru Polylactid+ (PLA+)Fabru
Modified: crystallising grade. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fabru, Polylactid+ (PLA+)7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2840 MPap. 1: Tensile modulus (ISO 527-3) | ISO 527As the sheet prints it: ISO 527-3 | not in the median: added filler or additive |
| Tensile yield strength orientation not stated | 54 MPap. 1: Yield stress (ISO 527-3) | ISO 527As the sheet prints it: ISO 527-3 | not in the median: added filler or additive |
| Elongation at break orientation not stated | 84 %p. 1: Elongation at break (ISO 527-3) | ISO 527As the sheet prints it: ISO 527-3 | not in the median: added filler or additive |
| Elongation at yield orientation not stated | 13 %p. 1: Elongation at yield (ISO 527-3) | ISO 527As the sheet prints it: ISO 527-3 | listed under other properties |
| HDT at 0.45 MPa | 90 °Cp. 1: Heat deflection temperature | ISO 75As the sheet prints it: 0.45 MPa (ISO 75-1/-2) | not in the median: added filler or additive |
| Density | 1.25 g/cm3p. 1: Density (ISO 1183) | ISO 1183 | |
| Melt mass-flow rate | 6.6 g/10minp. 1: MFR (ISO 1133) | ISO 1133 | |
Print settings
- Nozzle
- 210–250 °Cown data sheet
- Bed
- 70–90 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 60 °C for 4 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 210-250 °C; Bed 70-90°C; Drying 60°C; 2-4hFabru, Polylactid+ (PLA+)p. 1: Printing temperature; p. 1: Heated bed temperature; p. 1: Drying temperature / Drying time
Price
Not in the price sample.
Its 2 documents
What the maker says (8)
- Benefits
PLA+ is an impact-resistant and heat-optimized PLA.
Fabru, Polylactid+ (PLA+)p. 1 - Benefits
The appropriate additives make purefil PLA+ significantly more impact-resistant than standard PLA.
Fabru, Polylactid+ (PLA+)p. 1 - Benefits
The heat resistance has also been optimized.
Fabru, Polylactid+ (PLA+)p. 1 - Benefits
However, PLA+ is just as easy to print as standard PLA.
Fabru, Polylactid+ (PLA+)p. 1 - Benefits
The additives also optimize biodegradability.
Fabru, Polylactid+ (PLA+)p. 1 - Benefits
extremely impact-resistant
Fabru, Polylactid+ (PLA+)p. 1 - Surface finish
The PLA+ filament probably has the best surface structure of all filaments with a very pleasant soft-touch surface.
Fabru, Polylactid+ (PLA+)p. 1 - Surface finish
The matte look makes 3D printed parts look very high-quality.
Fabru, Polylactid+ (PLA+)p. 1
Chemicals and environment (1)
- UV and outdoor: described in words
The only disadvantage compared to standard PLA is the poorer UV resistance.
UVFabru, Polylactid+ (PLA+)p. 1
Fiberlogy VELVET PLAStrength XY, MPa56Strength Z, MPa—Modulus XY, GPa3.1Charpy notched, kJ/m²—HDT 0.45, °C53HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C50–70Chamber, °CnoneDrying, °C, h504 h
Fiberlogy VELVET PLAFiberlogy
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy VELVET PLA9 valuesUnless a row says otherwise: specimen not stated; its document points to a moulded or resin bar | |||
| Tensile modulus orientation not stated | 3100 MPap. 1: Tensile Modulus ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 56 MPap. 1: Tensile Strength @ Yield ISO 527 MPa | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 28 MPap. 1: Tensile Strength @ Break ISO 527 MPa | ISO 527 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 5 %p. 1: Elongation @ Break ISO 527 % | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 3 %p. 1: Elongation @ Yield ISO 527 % | specimen not stated, ISO 527 | listed under other properties |
| Charpy impact strength | 17 kJ/m2p. 1: Charpy Impact Strength (Unnotched) @ 23℃ ISO 179 kJ/m2 | ISO 179As the sheet prints it: 23℃ ISO 179 | not in the median: unnotched |
| HDT at 0.45 MPa | 53 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa ISO 75 °C | ISO 75As the sheet prints it: 0.45 MPa ISO 75 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 63 °Cp. 1: Vicat Softening Temperature ISO 306 °C | specimen not stated, ISO 306 | |
| Density | 1.27 g/cm3p. 1: Specific Density ISO 1183 g/cm3 | specimen not stated, ISO 1183 | |
| Fiberlogy, PLA Velvet Filament2 valuesUnless a row says otherwise: specimen not stated | |||
| Charpy impact strength orientation not stated | 17 kJ/m²p. 1: Charpy impact strength (unnotched) @ 23°C | ISO 179tested at 23 °C | not in the median: unnotched |
| HDT at 0.45 MPa | 55°Cp. 1: Heat deflection temperature @ 0.45 MPa | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 50–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 50 °C for 4 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 200°C - 230°C; Bed 50°C - 70°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy VELVET PLAp. 1: Recommended printing settings
- Nozzle 200–230°C; Bed 50–70°C; Drying 50°C / 4 hoursFiberlogy, PLA Velvet Filamentp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber
Price
Not in the price sample.
Its 3 documents
What the maker says (1)
- Surface finish
Thanks to modified PLA, prints made with this filament feature a subtle, velvety finish.
Fiberlogy, PLA Velvet Filamentp. 1
FormFutura High Gloss PLAStrength XY, MPa71Strength Z, MPa—Modulus XY, GPa3.2Charpy notched, kJ/m²2.6HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C215–245Bed, °C30–65Chamber, °CnoneDrying, °C, h508 h
FormFutura High Gloss PLAFormFutura
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, High Gloss PLA7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3200 Mpap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 71 Mpap. 1: Tensile strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 3,6 %p. 1: Elongation at break | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 2,6 KJ/m²p. 1: Impact strength | ISO 179tested at @23° Cnotched | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 58° C °Cp. 1: Viscat softening temp. | ISO 306 | |
| Density | 1.24 g/ccp. 1: Specific gravity | ISO 1183 | |
| Melt mass-flow rate | 8,2 g/10minp. 1: Melt flow rate 210°C / 2,16kg ISO 1133 | ISO 1133As the sheet prints it: 210°C / 2 16kg ISO 1133 | |
Print settings
- Nozzle
- 215–245 °Cown data sheet
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle ± 215 - 245° CFormFutura, High Gloss PLAp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Surface finish
FormFutura High Gloss PLA is a modified 3D printing filament that is based on PLA (polylactic acid) and enhanced with other polymers and modifiers, which gives 3D printed parts a surface finish with an extremely high gloss and high level of light dispersion and reflection.
FormFutura, High Gloss PLAp. 1 - Surface finish
High Gloss PLA filament comes in various deep brilliant colors and allows you to 3D print parts with almost no visible layers.
FormFutura, High Gloss PLAp. 1
iSANMATE HS - PLAStrength XY, MPa51.4Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–240Bed, °C35–60Chamber, °CnoneDrying, °C, h508 h
iSANMATE HS - PLAiSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, HS - PLA Filament Technical Data Sheet6 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 51.384 MPap. 1: Tensile Strength | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 5.36 %p. 1: Elongation At Break | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 68 MPap. 1: Flexural Strength | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT | 55 ℃p. 1: Heat Deflection Temperature | DSC | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm3p. 1: Density | ASTM D792 | |
| Water absorption | <0.6 %p. 1: Water Absorption | ASTM D570 | |
Print settings
- Nozzle
- 200–240 °Cown data sheet
- Bed
- 35–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 200-240; Bed 35-60 ℃iSANMATE, HS - PLA Filament Technical Data Sheetp. 1: Recommended printing settings; p. 1: Print temperature; p. 1: Footnote
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Good for
Typical Application: Consumer goods, construction, molds and tooling, laboratory equipment, etc.
iSANMATE, HS - PLA Filament Technical Data Sheetp. 1 - Adhesion between layers
It has a fast extrusion rate, high speed and excellent interlayer bonding strength, which greatly improves the 3D printing speed.
iSANMATE, HS - PLA Filament Technical Data Sheetp. 1
MatterHackers MH Build Series PLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²4IzodHDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–210Bed, °C60Chamber, °CnoneDrying, °C, h508 h
MatterHackers MH Build Series PLAMatterHackers
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| MatterHackers, TECHNICAL DATA SHEET - MH Build Series PLA5 valuesThe same values also in MatterHackers, TECHNICAL DATA SHEET - Build Series PLA.Unless a row says otherwise: specimen not stated | |||
| Elongation at break orientation not stated | 8 %p. 1: Tensile Elongation at Breakalso in MatterHackers, TECHNICAL DATA SHEET - Build Series PLA | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 3600 MPap. 1: Flexural Modulusalso in MatterHackers, TECHNICAL DATA SHEET - Build Series PLA | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 97 MPap. 2: Flexural Strengthalso in MatterHackers, TECHNICAL DATA SHEET - Build Series PLA | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 4 kJ/M2p. 2: Notched Izod Impactalso in MatterHackers, TECHNICAL DATA SHEET - Build Series PLA | ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.25 g/cm³p. 1: Density | ISO 1183 | |
Print settings
- Nozzle
- 190–210 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in MatterHackers, MatterHackers Black MH Build Series PLA Filament - 1.75mm (1kg); bed in MatterHackers, MatterHackers Black MH Build Series PLA Filament - 1.75mm (1kg).
Its 3 print profiles, in the documents' words
- Nozzle 190-210c; Bed 60cMatterHackers, TECHNICAL DATA SHEET - Build Series PLAp. 1: Recommended printing settings; p. 1: Suggested printing bed material
- Nozzle 190°c-220°c; Bed 60°cMatterHackers, TECHNICAL DATA SHEET - MH Build Series PLAp. 2: Recommended printing settings
- Nozzle 205±15°C; Bed Not needed, but 40±15 °C if your printer has heated bedMatterHackers, MatterHackers Black MH Build Series PLA Filament - 1.75mm (1kg)p. 1: Technical Specifications for MH Build Series Black PLA Filament: Printer Settings
Price
Not in the price sample.
Its 4 documents
What the maker says (7)
- Printing advice
Compatible with the Bambu AMS (Automatic Material System)
MatterHackers, MatterHackers Black MH Build Series PLA Filament - 1.75mm (1kg)p. 1 - Printing advice
Compatible with the Bambu AMS (Automatic Material System)
MatterHackers, MatterHackers Black MH Build Series PLA Filament - 1.75mm (1kg)p. 1 - Good for
MH Build Series Black PLA is an affordable PLA filament intended for producing quality 3D-printed parts.
MatterHackers, MatterHackers Black MH Build Series PLA Filament - 1.75mm (1kg)p. 1 - Good for
Prototype affordably in product-ready colors
MatterHackers, MatterHackers Black MH Build Series PLA Filament - 1.75mm (1kg)p. 1 - Benefits
MH Build Series Black PLA filament is the most affordable material on the market that is still reliable and capable of producing high-quality results.
MatterHackers, MatterHackers Black MH Build Series PLA Filament - 1.75mm (1kg)p. 1 - Benefits
It's really easy to use
MatterHackers, MatterHackers Black MH Build Series PLA Filament - 1.75mm (1kg)p. 1 - Benefits
Environmentally friendly - much more biodegradable when compared to other petroleum-based plastics
MatterHackers, MatterHackers Black MH Build Series PLA Filament - 1.75mm (1kg)p. 1
MatterHackers PLAStrength XY, MPa60Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C60–70Chamber, °CnoneDrying, °C, h508 h
MatterHackers PLAMatterHackers
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| MatterHackers, TECHNICAL DATA SHEET - PRO Series PLA8 values | |||
| Tensile modulus orientation not stated | 3.6 MPaphysically implausiblep. 1: Tensile Modulus | ASTM D882 | not in the median: physically implausible as published |
| Tensile yield strength orientation not stated | 60 MPap. 1: Tensile Yield Strength | ASTM D882 | not in the median: measured on film |
| Tensile break strength orientation not stated | 53 MPap. 1: Tensile Strength at Break | ASTM D882 | not in the median: measured on film |
| Flexural modulus orientation not stated | 3.8 MPaphysically implausiblep. 1: Flexural Modulus | ASTM D790 | not in the median: physically implausible as published |
| Flexural strength orientation not stated | 83 MPap. 1: Flexural Strength | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 16 J/mp. 1: Notched Izod Impact | ASTM D256 | not in the median: in J/m |
| HDT at 0.45 MPa | 55 °Cp. 2: Heat Distortion Temperature | ASTM E2092As the sheet prints it: E2092 0.45 MPa | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/ccp. 2: Specific Gravity | ASTM D792 | |
| MatterHackers, TECHNICAL DATA SHEET - PRO Series PLA4 valuesThe same values also in MatterHackers, TECHNICAL DATA SHEET - PRO Series PLA and MatterHackers, TECHNICAL DATA SHEET - PRO Series PLA.Unless a row says otherwise: specimen not stated | |||
| Tensile yield strength orientation not stated | 8700 PSIp. 1: Yield Strengthalso in MatterHackers, TECHNICAL DATA SHEET - PRO Series PLA | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 7700 PSIp. 1: Tensile Strength at Breakalso in MatterHackers, TECHNICAL DATA SHEET - PRO Series PLA | ASTM D638 | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 6.0 %p. 1: Tensile Elongationalso in MatterHackers, TECHNICAL DATA SHEET - PRO Series PLAalso in MatterHackers, TECHNICAL DATA SHEET - PRO Series PLA | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength orientation not stated | 0.3 ft-lb/inp. 1: Notched Izod Impact | ASTM D256 | not in the median: in J/m |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 60–70 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 3 print profiles, in the documents' words
- Nozzle 190°c-230°c; Bed 60°c-70°cMatterHackers, TECHNICAL DATA SHEET - PRO Series PLAp. 1: Recommended printing settings
- Nozzle 190°c-230°c; Bed 60°c-70°cMatterHackers, TECHNICAL DATA SHEET - PRO Series PLAp. 1: Recommended printing settings
- Nozzle 190°C - 230°C; Bed 60°C - 70°CMatterHackers, TECHNICAL DATA SHEET - PRO Series PLAp. 2: Recommended printing settings
Price
Not in the price sample.
Its 4 documents
What the maker says (1)
- Good for
Made in the USA, PRO Series PLA filament is designed to produce accurate and seamless 3D printed parts perfect for prototyping end-use parts, life-like models, or for taking your everyday 3D printing to a higher caliber.
MatterHackers, TECHNICAL DATA SHEET - PRO Series PLAp. 1
Recreus PLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa3.4Charpy notched, kJ/m²7HDT 0.45, °C—HDT 1.8, °C50Price, CAD/kg—Nozzle, °C215–225Bed, °C40–60Chamber, °CnoneDrying, °C, h508 h
Recreus PLARecreus
Modified: cosmetic dense filler. Its values are kept out of the material's medians.
Sold as toughened or impact-modified: "enhanced durability that makes it less brittle than conventional PLA" (Recreus, PLA, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Recreus, TECHNICAL DATA SHEET PLA8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3400 MPap. 1: Tensile modulus (Young) | ISO 527 | not in the median: added filler or additive |
| Tensile strength (yield or break not stated) orientation not stated | 14 MPaphysically implausiblep. 1: Tensile strength | ISO 527 | not in the median: physically implausible as published |
| Elongation at break orientation not stated | 40 %physically implausiblep. 1: Elongation at break | ISO 527 | not in the median: physically implausible as published |
| Flexural modulus orientation not stated | 3500 MPap. 1: MEF Flexural Modulus Elasticity | ISO 178 | not in the median: added filler or additive |
| Charpy impact strength orientation not stated | 7 kJ/m²p. 1: Notched impact strengh (Charpy)n at +23°C | ISO 179tested at 23 °C | not in the median: added filler or additive |
| Charpy impact strength orientation not stated | 5 kJ/m²p. 1: Notched impact strengh (Charpy)n at -30°C | ISO 179tested at -30 °C | not in the median: tested below room temperature |
| HDT at 1.8 MPa | 50 °Cp. 1: HDT (01,82MPa) | ISO 75As the sheet prints it: 01,82MPa ISO 75-2 | not in the median: added filler or additive |
| Density | 1,38 g/cm3p. 1: Material density | ISO 1183 | |
Print settings
- Nozzle
- 215–225 °Cown data sheet
- Bed
- 40–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in Recreus, PLA; bed in Recreus, PLA.
Its 2 print profiles, in the documents' words
- Nozzle 215 - 225°C; Bed 40-60°CRecreus, TECHNICAL DATA SHEET PLAp. 1: Printing temperatures, bed temperature; p. 1: Minimal nozzle diameter
- Nozzle 200°C; Bed 60°C; Chamber PLA prints well in room temperatureRecreus, PLAp. 1: Temperature for 0.4mm nozzle; p. 1: Bed Temperature First Layer; p. 1: Build Surface Recommendations; p. 1: Temperature Control Tips; p. 1: Temperature Control Tips
Price
Not in the price sample.
Its 3 documents
What the maker says (50)
- Warping and shrinkage
Reliable Performance: Minimal warping and moisture resistance
Recreus, PLAp. 1 - Benefits
enhanced durability that makes it less brittle than conventional PLA
Recreus, PLAp. 1 - Benefits
Recreus PLA is the most versatile and widely used polymer in 3D printing, engineered for exceptional ease of use across all printer types.
Recreus, PLAp. 1 - Benefits
This biobased filament combines enhanced mechanical properties with improved impact resistance and reduced moisture absorption, making it perfect for both rapid prototyping and final parts.
Recreus, PLAp. 1 - Odour and emissions
Its odorless, non-toxic nature and minimal warping characteristics ensure reliable, high-quality prints every time.
Recreus, PLAp. 1 - Warping and shrinkage
minimal warping characteristics ensure reliable, high-quality prints every time
Recreus, PLAp. 1 - Surface finish
its industrial matte finish and outstanding detail quality
Recreus, PLAp. 1 - Good for
Designed for both industrial and personal use, this filament excels in quick prototyping, daily design needs, and short production runs of customized products.
Recreus, PLAp. 1 - Benefits
Whether you're a professional or hobbyist, Recreus PLA delivers consistent, high-quality results across all 3D printers.
Recreus, PLAp. 1 - Benefits
Universal Printing: Compatible with all 3D printers Easy Print
Recreus, PLAp. 1 - Benefits
Enhanced Properties: Improved impact resistance and durability
Recreus, PLAp. 1 - Surface finish
Superior Finish: Industrial matte surface with excellent detail
Recreus, PLAp. 1 - Good for
Rapid Prototyping: Quick visual models and concepts
Recreus, PLAp. 1 - Good for
Consumer Products: Phone cases and everyday accessories
Recreus, PLAp. 1 - Good for
Creative Design: Jewelry and decorative objects
Recreus, PLAp. 1 - Good for
Entertainment: Toys, figures, and game pieces
Recreus, PLAp. 1 - Good for
Short Production: Small batch custom products
Recreus, PLAp. 1 - Moisture sensitivity
Store in a cool, dry place
Recreus, PLAp. 1 - Moisture sensitivity
PLA is less hygroscopic than other materials, but proper storage helps maintain quality
Recreus, PLAp. 1 - Benefits
PLA (Polylactic Acid) is a biodegradable polymer known for its ease of printing, good surface quality and dimensional accuracy.
Recreus, PLAp. 1 - Good for
Perfect for decorative parts, prototypes, and general printing needs where mechanical properties are not critical.
Recreus, PLAp. 1 - Printing advice
PLA allows for moderate printing speeds while maintaining good print quality. These speeds are optimized for reliability and quality.
Recreus, PLAp. 1 - Printing advice
PEI sheet works excellent
Recreus, PLAp. 1 - Printing advice
Glass bed with proper cleaning
Recreus, PLAp. 1 - Printing advice
Textured surfaces for better adhesion
Recreus, PLAp. 1 - Printing advice
Clean surface with IPA before printing
Recreus, PLAp. 1 - Printing advice
PLA requires maximum cooling for best results
Recreus, PLAp. 1 - Printing advice
Full fan speed helps with bridging and overhangs
Recreus, PLAp. 1 - Printing advice
First layer needs no cooling for good adhesion
Recreus, PLAp. 1 - Printing advice
Small parts need maximum cooling
Recreus, PLAp. 1 - Printing advice
PLA prints well in room temperature
Recreus, PLAp. 1 - Printing advice
Enclosure is not recommended for PLA
Recreus, PLAp. 1 - Printing advice
Monitor first layer temperature and adhesion
Recreus, PLAp. 1 - Printing advice
Adjust fan speed only for first layer
Recreus, PLAp. 1 - Printing advice
Use maximum fan speed for all other layers
Recreus, PLAp. 1 - Adhesion between layers
1. Increase temperature by 5-10°C 2. Reduce cooling fan speed for first few layers 3. Clean build surface with IPA
Recreus, PLAp. 1 - Warping and shrinkage
1. Increase bed temperature to 60°C 2. Add brim (5-10mm) 3. Ensure no drafts in printing area
Recreus, PLAp. 1 - Printing advice
1. Lower temperature by 5°C 2. Increase retraction speed to 45mm/s 3. Adjust retraction distance
Recreus, PLAp. 1 - Printing advice
1. Increase temperature by 5-10°C 2. Clean nozzle or try cold pull 3. Check filament quality
Recreus, PLAp. 1 - Printing advice
1. Ensure 100% cooling 2. Reduce temperature by 5°C 3. Reduce print speed by 50%
Recreus, PLAp. 1 - Printing advice
Clean bed with IPA before each print
Recreus, PLAp. 1 - Printing advice
Level bed when heated to printing temperature
Recreus, PLAp. 1 - Printing advice
Use 0.2mm first layer height for better adhesion
Recreus, PLAp. 1 - Moisture sensitivity
Store in a dry place with desiccant
Recreus, PLAp. 1 - Printing advice
Always use cooling fan (except first layer)
Recreus, PLAp. 1 - Printing advice
Print first layer at 50% speed
Recreus, PLAp. 1 - Printing advice
Use brim for tall or large prints
Recreus, PLAp. 1 - Printing advice
Keep ambient temperature stable
Recreus, PLAp. 1 - Benefits
PLA is one of the easiest materials to print.
Recreus, PLAp. 1 - Printing advice
These settings are optimized for quality and reliability, but you may need to fine-tune based on your specific printer and environment.
Recreus, PLAp. 1
Spectrum FlameGuard PLAStrength XY, MPa36.8Strength Z, MPa—Modulus XY, GPa2.6Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–240Bed, °C40–60Chamber, °CnoneDrying, °C, h508 h
Spectrum FlameGuard PLASpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET FlameGuard PLA8 valuesThe same values also in Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29.Unless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2.6 GPap. 1: Young's Modulus | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 36.8 MPap. 1: Tensile Strength at Yield | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 10 %p. 1: Tensile Strain at Break | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 8.3 J/mp. 1: Notched Izod Impact Strength | ISO 180 | not in the median: in J/m |
| HDT | 55 °Cp. 1: HDT (amorphous) | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT | 90 °Cp. 1: HDT (crystalline)also in Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29 | no standard statedannealed at a temperature its sheet does not state for a time its sheet does not stateHDT (crystalline) | not in the median: another value of this product is in it |
| Density | 1.26 g/cm3p. 1: Specific Gravity | ASTM D792As the sheet prints it: D 792 | |
| Melt mass-flow rate | 10 g/10minp. 1: MFR (210°C, 2.16kg) | no standard namedAs the sheet prints it: 210°C 2.16kg | |
Print settings
- Nozzle
- 210–240 °Cown data sheet
- Bed
- 40–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
- Annealing
- temperature not statedown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 210-240°C; Bed 40-60°CSpectrum, TECHNICAL DATA SHEET FlameGuard PLAp. 1: Recommended printing settings; p. 1: Nozzle note; p. 1: Dry box; p. 1: * settings are based on a 0,4 mm nozzle.
- No temperature statedSpectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 22: Dry box recommended; p. 22: Ruby or hardened nozzle recommended
Price
Not in the price sample.
1 listing: 1 with no regular price per kilogram recorded
- 3D Printing Canada: 65 per kg, sale pricePolar White - Spectrum FlameGuard PLA Filament - 1.75mm, 1kg (SKU 81450)not used: no regular price per kilogram recorded; seen 30 Sep 2026
Its 3 documents
What the maker says (5)
- Benefits
Spectrum FlameGuard PLA is a halogen-free, flame-retardant filament designed for applications requiring both durability and fire safety, meeting V0 UL94 standards.
Spectrum, TECHNICAL DATA SHEET FlameGuard PLAp. 1 - Benefits
It is an eco-friendly alternative to FR ABS, offering recyclability and a significantly lower carbon footprint.
Spectrum, TECHNICAL DATA SHEET FlameGuard PLAp. 1 - Moisture sensitivity
Dry box not necessary
Spectrum, TECHNICAL DATA SHEET FlameGuard PLAp. 1 - Nozzle wear
Ruby or hardened nozzle not necessary
Spectrum, TECHNICAL DATA SHEET FlameGuard PLAp. 1 - Benefits
Halogen-free, flame-retardant PLA; eco-friendly; UL94 V0; 7x lower carbon footprint than ABS FR
Spectrum, Spectrum Filaments Product Portfolio 2025 — Prografen pp28–29p. 20
Spectrum THE FILAMENT PLA MatteStrength XY, MPa37Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C60HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C40–50Chamber, °CnoneDrying, °C, h508 h
Spectrum THE FILAMENT PLA MatteSpectrum
Data sheet shared with The Filament PLA Matte: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Matte6 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile yield strength orientation not stated | 37 MPap. 1: Tensile Strength at Yield | ASTM D638As the sheet prints it: D 638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 9 %p. 1: Elongation at break | ASTM D638As the sheet prints it: D 638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 2.2 Gpap. 1: Flexural Modulus | ASTM D790As the sheet prints it: D 790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength | 51,2 J/mp. 1: Izod Notched | ASTM D256As the sheet prints it: D 256 | not in the median: in J/m |
| HDT | 60 °Cp. 1: Heat Deflection Temperature | ASTM D648As the sheet prints it: D 648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.29 g/cm3p. 1: Specific Gravity | ASTM D792As the sheet prints it: D 792 | |
| Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Matte1 value | |||
| Izod impact strength orientation not stated | 51,2 J/mp. 1: Izod Notched | ASTM D256As the sheet prints it: D 256; notched | not in the median: in J/m |
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 40–50 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 195-220°C; Bed 40-50°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Mattep. 1: Recommended printing settings; p. 1: Dry box recommended; p. 1: Adhesive; p. 1: settings footnote
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Benefits
matte surface, biodegradable, user friendly, best choice for everyday use
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Mattep. 1 - Surface finish
Surface finish matte
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Mattep. 1 - Moisture sensitivity
Dry box recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Mattep. 1 - Nozzle wear
Ruby or hardened nozzle recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Mattep. 1
The Filament PLA MatteStrength XY, MPa37Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C60HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C40–50Chamber, °CnoneDrying, °C, h508 h
The Filament PLA MatteThe Filament
Data sheet shared with Spectrum THE FILAMENT PLA Matte: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 40–50 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 195-220°C; Bed 40-50°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Mattep. 1: Nozzle temperature, Bed temperature, Closed chamber for printing, Ruby or hardened nozzle; p. 1: Dry box recommended; p. 1: * settings are based on a 0,4 mm nozzle.
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Surface finish
Surface finish matte
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Mattep. 1 - Moisture sensitivity
Dry box recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Mattep. 1 - Nozzle wear
Ruby or hardened nozzle recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Mattep. 1
3D4Makers PLLAStrength XY, MPa50Strength Z, MPa—Modulus XY, GPa3.5Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C180–220Bed, °C40–60Chamber, °CnoneDrying, °C, h603 h
3D4Makers PLLA3D4Makers
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3D4Makers, PLLA Filament10 values | |||
| Tensile modulus orientation not stated | 3500 MPap. 1: Young’s Modulus ISO 527 | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile break strength orientation not stated | 50 MPap. 1: Tensile strength at break ISO 527 | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 5 %p. 1: Tensile elongation at break ISO 527 | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 3350 MPap. 1: Flexural Modulus ISO 178 | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength | 21 kJ/m2p. 1: Charpy impact strength (unnotched) ISO 179 | ISO 179 | not in the median: unnotched |
| HDT | 55-60 °Cp. 1: HDT Method B120 ISO 75-2 | ISO 75As the sheet prints it: 120 ISO 75-2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 61 °Cp. 1: Vicat Method A50 | ISO 306As the sheet prints it: 50 ISO 306 | |
| Melting temperature | 175 °Cp. 1: Melt temperature | no standard stated | |
| Melt mass-flow rate | 3 g/10minp. 1: MFI (190° ; 2,16 kg) | ISO 1133As the sheet prints it: ISO 1133; 2,16 kg | |
| Mould shrinkage orientation not stated | 0.1-0.2 %p. 1: Shrinkage | no standard stated | |
Print settings
- Nozzle
- 180–220 °Cown data sheet
- Bed
- 40–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 60 °C for 3 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 180-220 °C; Bed 40 - 60°C; Drying 3 hours, 60°C3D4Makers, PLLA Filamentp. 1: Recommended printing settings; p. 1: Drying Instruction; p. 1: Bed Adhesion
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Good for
Suitable for bioengineering research
3D4Makers, PLLA Filamentp. 1 - Benefits
This PLLA is industrially compostable according to NF EN 13432:2000 standard.
3D4Makers, PLLA Filamentp. 1 - Benefits
High transparency
3D4Makers, PLLA Filamentp. 1 - Benefits
Food safe
3D4Makers, PLLA Filamentp. 1
Nanovia PLA EF 3D850Strength XY, MPa58Strength Z, MPa—Modulus XY, GPa4.16Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–210Bed, °C50–70Chamber, °C20Drying, °C, h504 h
Nanovia PLA EF 3D850Nanovia
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Nanovia, Nanovia PLA EF 3D850 : Endocrine disruptor free : Nanovia10 values | |||
| Tensile modulus XY | 4155 MPap. 1: Young’s modulus (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer. | in the median |
| Tensile modulus orientation not stated | 3540 MPap. 1: Young’s modulus | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins at 0°, along with the tension stress. | not in the median: another value of this product is in it |
| Tensile strength (yield or break not stated) XY | 58 MPap. 1: Ultimate strength (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer. | in the median |
| Tensile strain at strength XY | 2.7 %p. 1: Elongation ultimate strength (+45° / -45° tab) | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins successively at 45° and -45° per layer. | listed under other properties |
| Tensile strain at strength orientation not stated | 2.6 %p. 1: Elongation ultimate strength | ISO 527As the sheet prints it: ISO 527-2/1Aprint settingsTest performed at 1mm/min on 3D printed test specimins at 0°, along with the tension stress. | listed under other properties |
| Izod impact strength | 1,18 kJ/m2p. 1: Impact IZOD notched | ASTM D256As the sheet prints it: D256 | not in the median: to another standard |
| HDT at 0.45 MPa | 80-90 °Cphysically implausiblep. 1: HDT-B (0,45 MPa) | ASTM E2092As the sheet prints it: 0,45 MPa E2092 | not in the median: physically implausible as published |
| Glass transition temperature | 55 – 60 °Cp. 1: Tg | no standard stated | in the median |
| Density | 1.24 g/cm3p. 1: Density | ISO 1183 | |
| Melt mass-flow rate | 7 – 9 g / 10 minp. 1: MFR | ISO 1133 | |
| Nanovia, PLA EF 3D850 official material safety data sheet2 valuesUnless a row says otherwise: specimen not stated | |||
| Glass transition temperature | 52 °Cp. 2: Tg | no standard stated | not in the median: replaced by a newer edition of the sheet or by the data sheet, so not used in deciding |
| Density | 1,00 g/cm3p. 2: Density | no standard stated | |
Print settings
- Nozzle
- 190–210 °Cown data sheet
- Bed
- 50–70 °Cown data sheet
- Heated chamber
- 20 °Cown data sheet
- Drying
- optional: 50 °C for 4 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190 – 210 °C; Bed 50 – 70 °C; Chamber 20 °C; Drying Dehydrate for 4h at 50°C prior to printing after prolonged exposure to humidity.Nanovia, Nanovia PLA EF 3D850 : Endocrine disruptor free : Nanoviap. 1: Recommended printing settings; p. 1: Drying note
Price
Not in the price sample.
Its 3 documents
What the maker says (7)
- Good for
perfectly suited for decorative indoor objects, frequent contact parts, and prototypes.
Nanovia, Nanovia PLA EF 3D850 : Endocrine disruptor free : Nanoviap. 1 - Good for
This certified endocrine disruptor free 3D filament is perfect for prototypes and toys.
Nanovia, Nanovia PLA EF 3D850 : Endocrine disruptor free : Nanoviap. 1 - Benefits
Nanovia PLA EF 3D850 is easy to print
Nanovia, Nanovia PLA EF 3D850 : Endocrine disruptor free : Nanoviap. 1 - Benefits
Certified toy safety for native, black, grey, blue, green and orange: EN 71-3
Nanovia, Nanovia PLA EF 3D850 : Endocrine disruptor free : Nanoviap. 1 - Pitfalls and limitations
For an outdoor usage, we recommend that you paint your print or submit them to an anti UV treatment, such as our Nanovia smoothing solution.
Nanovia, Nanovia PLA EF 3D850 : Endocrine disruptor free : Nanoviap. 1 - Pitfalls and limitations
However, due to PLA’s relatively low temperature resistance, pieces in direct sunlight should be avoided.
Nanovia, Nanovia PLA EF 3D850 : Endocrine disruptor free : Nanoviap. 1 - Benefits
The product is approved for food contact.
Nanovia, PLA EF 3D850 official material safety data sheetp. 2: Section7.2 safe storage, English column
Chemicals and environment (2)
- Acid resistance: described in words
Strong alkali or acids can degrade the material.
Effect of strong acids · strongNanovia, PLA EF 3D850 official material safety data sheetp. 2: Section10.3 possible side reactions - Alkali resistance: described in words
Strong alkali or acids can degrade the material.
Effect of strong alkalis · strongNanovia, PLA EF 3D850 official material safety data sheetp. 2: Section10.3 possible side reactions
Yousu PLAStrength XY, MPa60Strength Z, MPa—Modulus XY, GPa3.5Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–240Bed, °C60Chamber, °CnoneDrying, °C, h508 h
Yousu PLAYousu
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Yousu, Yousu PLA 3D FILMAENT Technical Data Sheet8 values | |||
| Tensile modulus orientation not stated | 3.5 GPap. 1: Tensile Modulus GPa | ASTM D638 | in the median |
| Tensile yield strength orientation not stated | 60 MPap. 1: Tensile Strength (60) | ASTM D638As the sheet prints it: ASTM D638; yield | in the median |
| Tensile break strength orientation not stated | 53 MPap. 1: Tensile Strength (53) | ASTM D638As the sheet prints it: ASTM D638; break | not in the median: another value of this product is in it |
| Elongation at break orientation not stated | 6 %p. 1: Tensile Elongation % | no standard stated | in the median |
| Izod impact strength | 16 J/mp. 1: Notched IZOD ASTM D256 J/m | ASTM D256 | not in the median: in J/m |
| Melting temperature | 155-170 ℃p. 1: Melt Point ℃ | no standard stated | |
| Density | 1.24 g/cm3p. 1: Density ASTM D792 g/cm3 | ASTM D792 | |
| Melt mass-flow rate | 7 g/10minp. 1: Melt Flow Rate ASTM D1238 g/10min 210℃, 2.16Kg | ASTM D1238As the sheet prints it: 210℃ 2.16Kg ASTM D1238 | |
Print settings
- Nozzle
- 190–240 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-240℃; Bed None needed (or 60℃ if applicable)Yousu, Yousu PLA 3D FILMAENT Technical Data Sheetp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
3D4Makers PLAStrength XY, MPa66Strength Z, MPa—Modulus XY, GPa3.03Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C170–220Bed, °C20–60Chamber, °CnoneDrying, °C, h508 h
3D4Makers PLA3D4Makers
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3D4Makers, PLA Filament7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3027 MPap. 1: Tensile (E) modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 66 MPap. 1: Tensile strength at yield | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Charpy impact strength orientation not stated | 3,4 kJ/m²p. 1: Impact strength - Charpy method 23˚C | ISO 179tested at 23˚C | not in the median: notch not stated |
| Glass transition temperature | 57°Cp. 1: Glass transition temp | ISO 11357 | in the median |
| Glass transition temperature | held back: the sheet's unit or table layout is unclearheld backp. 1: The glass temperature is typically around | no standard stated | not in the median: held back |
| Melting temperature | 80 and 150 °Cp. 1: melting temperature between | no standard stated | |
| Decomposition temperature | 250 °Cp. 1: decomposing temperature is roughly | no standard stated | |
| 3D4Makers, Technical data sheet 3D printing filament PLA Filament5 values | |||
| Tensile modulus orientation not stated | 3309 MPap. 1: Tensile Modulus MD ASTM D882 | ASTM D882 | not in the median: measured on film |
| Tensile strength (yield or break not stated) orientation not stated | 110,3 MPap. 1: Tensile Strength MD ASTM D882 | ASTM D882 | not in the median: measured on film |
| Elongation at break orientation not stated | 160 %p. 1: Elongation at Break MD ASTM D882 | ASTM D882 | not in the median: measured on film |
| Melting temperature | 145-160 °Cp. 1: Melting Point ASTM 3418 | no standard namedAs the sheet prints it: ASTM 3418 | |
| Density | 1.24 g/cm3p. 1: Density ASTM D1505 | ASTM D1505 | |
Print settings
- Nozzle
- 170–220 °Cown data sheet
- Bed
- 20–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): nozzle in 3D4Makers, PLA Filament.
Its 2 print profiles, in the documents' words
- Nozzle 170- 220 °C; Bed 20 - 60 °C3D4Makers, Technical data sheet 3D printing filament PLA Filamentp. 2: Recommended printing settings; p. 2: Bed Adhesion
- Nozzle 180 - 220°C; Bed 20 - 60°C3D4Makers, PLA Filamentp. 1: Printer nozzle temperature; p. 1: Heated bed temperature; p. 1: Bed Adhesion
Price
Not in the price sample.
Its 3 documents
What the maker says (9)
- Warping and shrinkage
Due to a low shrinkage factor PLA will not deform after cooling
3D4Makers, PLA Filamentp. 1 - Benefits
PLA Filament is recyclable but can also be biological decomposed in composting plants.
3D4Makers, PLA Filamentp. 1 - Warping and shrinkage
Due to a low shrinkage factor PLA will not deform after cooling, this makes the material ideal for 3D printing on FFF / FDM machines.
3D4Makers, PLA Filamentp. 1 - Benefits
Great printability
3D4Makers, PLA Filamentp. 1 - Benefits
Biodegradable
3D4Makers, PLA Filamentp. 1 - Benefits
Food contact approved
3D4Makers, PLA Filamentp. 1 - Printing advice
To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations.
3D4Makers, PLA Filamentp. 1 - Printing advice
Keep the 3D printer out of the sun.
3D4Makers, PLA Filamentp. 1 - Moisture sensitivity
When the 3D printer is not being used it is important to keep the 3D 4 MAKERS PLA Filament in a bag and stored in a cool (15-25˚C) and dry room away from UV light until it is used again.
3D4Makers, PLA Filamentp. 1
Fiberlogy FiberSatinStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²4IzodHDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C50Chamber, °CnoneDrying, °C, h404 h
Fiberlogy FiberSatinFiberlogy
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy FiberSatin9 values | |||
| Tensile modulus orientation not stated | 2500 MPap. 1: Tensile Modulus ASTM D882 MPa | ASTM D882 | not in the median: measured on film |
| Tensile yield strength orientation not stated | 48 MPap. 1: Tensile Strength @ Yield ASTM D882 MPa | ASTM D882 | not in the median: measured on film |
| Tensile break strength orientation not stated | 50 MPap. 1: Tensile Strength @ Break ASTM D882 MPa | ASTM D882 | not in the median: measured on film |
| Elongation at yield orientation not stated | 4 %p. 1: Elongation @ Yield ASTM D882 % | ASTM D882 | listed under other properties |
| Izod impact strength | 4 kJ/m2p. 1: Izod Impact Strength (Notched) @ 23℃ ISO 180 kJ/m2 | ISO 180As the sheet prints it: 23℃ ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 55 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa °C | ASTM E2092As the sheet prints it: 0.45 MPa E2092 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 55-60 °Cp. 1: Glass Transition Temperature Tg °C | ASTM D3418As the sheet prints it: D3418 | in the median |
| Melting temperature | 145-160 °Cp. 1: Melting Temperature Tm °C | ASTM D3418As the sheet prints it: D3418 | |
| Density | 1.2 g/cm3p. 1: Specific Density ASTM D792 g/cm3 | ASTM D792 | |
| Fiberlogy, FiberSatin PLA Filament - S2 - Fiberlogy1 value | |||
| Izod impact strength orientation not stated | 4 kJ/m²p. 1: Izod impact strength (notched) @ 23°C | ISO 180tested at 23°C | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 50 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 40 °C for 4 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fiberlogy, FiberSatin PLA Filament - S2 - Fiberlogy.
Its 2 print profiles, in the documents' words
- Nozzle 200°C - 230°C; Bed 50°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy FiberSatinp. 1: Recommended printing settings
- Nozzle 200–230°C; Bed 60°C; Drying 40°C / 4 hoursFiberlogy, FiberSatin PLA Filament - S2 - Fiberlogyp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Bed material; p. 1: Drying conditions; p. 1: Enclosed chamber
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Good for
Ideal for decorative indoor prints, ornaments, and design elements.
Fiberlogy, FiberSatin PLA Filament - S2 - Fiberlogyp. 1 - Surface finish
Fiberlogy FiberSatin is a semi-matte 3D printing filament that gives models a professional and elegant look, as if they weren’t printed on a 3D printer.
Fiberlogy, FiberSatin PLA Filament - S2 - Fiberlogyp. 1 - Surface finish
The filament masks layer lines, providing a slightly glossy, satin finish while remaining as easy to print as traditional PLA.
Fiberlogy, FiberSatin PLA Filament - S2 - Fiberlogyp. 1 - Surface finish
A semi-matte finish with a subtle sheen
Fiberlogy, FiberSatin PLA Filament - S2 - Fiberlogyp. 1
Fiberlogy FiberSilkStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²5IzodHDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C50–70Chamber, °CnoneDrying, °C, h404 h
Fiberlogy FiberSilkFiberlogy
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fiberlogy, TECHNICAL DATA SHEET Fiberlogy FiberSilk9 values | |||
| Tensile modulus orientation not stated | 2300 MPap. 1: Tensile Modulus ASTM D882 MPa | ASTM D882 | not in the median: measured on film |
| Tensile yield strength orientation not stated | 43 MPap. 1: Tensile Strength @ Yield ASTM D882 MPa | ASTM D882 | not in the median: measured on film |
| Tensile break strength orientation not stated | 42 MPap. 1: Tensile Strength @ Break ASTM D882 MPa | ASTM D882 | not in the median: measured on film |
| Elongation at yield orientation not stated | 5 %p. 1: Elongation @ Yield ASTM D882 % | ASTM D882 | listed under other properties |
| Izod impact strength | 5 kJ/m2p. 1: Izod Impact Strength (Notched) @ 23℃ ISO 180 kJ/m2 | ISO 180As the sheet prints it: 23℃ ISO 180 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 55 °Cp. 1: Heat Distortion Temperature @ 0.45 MPa °C | ASTM E2092As the sheet prints it: 0.45 MPa E2092 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 55-60 °Cp. 1: Glass Transition Temperature Tg °C | ASTM D3418As the sheet prints it: D3418 | in the median |
| Melting temperature | 145-160 °Cp. 1: Melting Temperature Tm °C | ASTM D3418As the sheet prints it: D3418 | |
| Density | 1.22 g/cm3p. 1: Specific Density ASTM D792 g/cm3 | ASTM D792 | |
| Fiberlogy, FiberSilk PLA Filament - S2 - Fiberlogy1 value | |||
| Izod impact strength orientation not stated | 5 kJ/m²p. 1: Izod impact strength (notched) @ 23°C | ISO 180tested at 23°C | not in the median: another value of this product is in it |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 50–70 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- 40 °C for 4 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fiberlogy, FiberSilk PLA Filament - S2 - Fiberlogy.
Its 2 print profiles, in the documents' words
- Nozzle 210°C - 230°C; Bed 50°C - 70°CFiberlogy, TECHNICAL DATA SHEET Fiberlogy FiberSilkp. 1: Recommended printing settings
- Nozzle 210–230°C; Bed 60°C; Drying 40°C / 4 hoursFiberlogy, FiberSilk PLA Filament - S2 - Fiberlogyp. 1: Printing temperature; p. 1: Bed temperature; p. 1: Build surface; p. 1: Drying conditions; p. 1: Enclosed chamber
Price
Not in the price sample.
Its 3 documents
What the maker says (8)
- Good for
Available in a wide range of vibrant colors, it’s ideal for eye-catching decorative and design projects.
Fiberlogy, FiberSilk PLA Filament - S2 - Fiberlogyp. 1 - Good for
Perfect for printing decorative models and figurines, giving them a luxurious, metallic look without the need for additional painting.
Fiberlogy, FiberSilk PLA Filament - S2 - Fiberlogyp. 1 - Benefits
High strength and impact resistance It ensures that the finished prints are not brittle and, rather than breaking under force, are able to absorb the impact energy.
Fiberlogy, FiberSilk PLA Filament - S2 - Fiberlogyp. 1 - Precision and tolerance
Low shrinkage ensures precise dimensions and better reproduction of details.
Fiberlogy, FiberSilk PLA Filament - S2 - Fiberlogyp. 1 - Surface finish
Fiberlogy FiberSilk is a 3D printing filament that combines a silky, metallic finish with the printability of standard PLA.
Fiberlogy, FiberSilk PLA Filament - S2 - Fiberlogyp. 1 - Surface finish
It produces elegant, glossy prints that hide layer lines and bring out every detail of the model.
Fiberlogy, FiberSilk PLA Filament - S2 - Fiberlogyp. 1 - Surface finish
A glossy, metallic finish with a deep color effect
Fiberlogy, FiberSilk PLA Filament - S2 - Fiberlogyp. 1 - Surface finish
It produces exceptionally smooth side walls on models, making the printed objects look as if they were injection-molded.
Fiberlogy, FiberSilk PLA Filament - S2 - Fiberlogyp. 1
FormFutura Tough PLAStrength XY, MPa46Strength Z, MPa—Modulus XY, GPa2.75Charpy notched, kJ/m²29.8HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C215–225Bed, °C30–65Chamber, °CnoneDrying, °C, h508 h
FormFutura Tough PLAFormFutura
Sold as toughened or impact-modified: "FormFutura Tough PLA is a 3D printer filament that is roughly 750% more impact resistant than regular PLA filaments." (FormFutura, Technical Data Sheet Tough PLA, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet Tough PLA6 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2750 Mpap. 1: Tensile modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile yield strength orientation not stated | 46 Mpap. 1: Tensile strength | printed specimen (implied by the document), ISO 527 | in the median |
| Charpy impact strength | 29.8 KJ/m²p. 1: Impact strength | ISO 179tested at 23° C (73° F)notched | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 57° C °Cp. 1: Viscat softening temp. | ISO 306 | |
| Density | 1.21 g/ccp. 1: Specific gravity | ISO 1183 | |
| Melt mass-flow rate | 8.75 g/10minp. 1: Melt flow rate | ISO 1133 | |
Print settings
- Nozzle
- 215–225 °Cown data sheet
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle ± 215 - 225° CFormFutura, Technical Data Sheet Tough PLAp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
FormFutura Tough PLA is a 3D printer filament that is roughly 750% more impact resistant than regular PLA filaments.
FormFutura, Technical Data Sheet Tough PLAp. 1 - Benefits
Our Tough PLA filament is a performance PLA that combines durability with ABS-like strength properties and yet it is a significantly stiffer 3D printing material than ABS filaments.
FormFutura, Technical Data Sheet Tough PLAp. 1 - Adhesion between layers
Tough PLA exhibits excellent layer adhesion allowing 3D printed objects to achieve similar mechanical strength properties compared to injection molding.
FormFutura, Technical Data Sheet Tough PLAp. 1
iSANMATE HS PLA MatteStrength XY, MPa58Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C30–65Chamber, °CnoneDrying, °C, h508 h
iSANMATE HS PLA MatteiSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, HS PLA Matte Filament Technical Data Sheet7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 58 MPap. 1: Tensile Strength | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 17 %p. 1: Elongation At Break | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 68 MPap. 1: Flexural Strength | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Melting temperature | 170-190 ℃p. 1: Melting Point | DSC | |
| Density | 1.22-1.24 g/cm3p. 1: Density | ASTM D792 | |
| Water absorption | <0.6 %p. 1: Water Absorption | ASTM D570 | |
| Melt mass-flow rate | 8-12 g/10minp. 1: Melt Index | ASTM D1238As the sheet prints it: 190℃ 2160g) ASTM D-1238 | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-220iSANMATE, HS PLA Matte Filament Technical Data Sheetp. 1: Print temperature
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
Excellent fluidity, perfectly adapted for high-speed printing
iSANMATE, HS PLA Matte Filament Technical Data Sheetp. 1 - Benefits
Outstanding crystallization speed, the model cools and sets quickly
iSANMATE, HS PLA Matte Filament Technical Data Sheetp. 1 - Benefits
No filament breakage during high-speed printing
iSANMATE, HS PLA Matte Filament Technical Data Sheetp. 1
iSANMATE PDSStrength XY, MPa58Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–210Bed, °C30–65Chamber, °CnoneDrying, °C, h508 h
iSANMATE PDSiSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, PDS Technical Data Sheet(TDS)8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 58 MPap. 1: Tensile Strength | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 19 %p. 1: Elongation at break | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 68 MPap. 1: Bending strength | ASTM D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 55 ℃p. 1: Vicat softening point A/120 | ASTM D648As the sheet prints it: ASTM D-648; method=A/120 | |
| Melting temperature | 170-190 ℃p. 1: Melting point | DSC | |
| Density | 1.22-1.23 g/cm3p. 1: Density | ASTM D792 | |
| Water absorption | <0.6 %p. 1: Water absorption | ASTM D570 | |
| Melt mass-flow rate | 15 g/10minp. 1: Melt finger(190℃,2160g) | ASTM D1238As the sheet prints it: ASTM D-1238; 2160g | |
Print settings
- Nozzle
- 190–210 °Cown data sheet
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-210iSANMATE, PDS Technical Data Sheet(TDS)p. 1: print temperature
Price
Not in the price sample.
Its 2 documents
What the maker says (6)
- Good for
It is mainly used in the production of outdoor advertising words, subtitles, signs, etc.
iSANMATE, PDS Technical Data Sheet(TDS)p. 1 - Good for
iSANMATE PDS advertising letter consumables are easy to operate, compatible with most desktop 3D printers, affordable and cost-effective, and are ideal for making outdoor signs.
iSANMATE, PDS Technical Data Sheet(TDS)p. 1 - Benefits
It adopts high-strength anti-ultraviolet PVC material, which has the characteristics of anti-aging and good weather resistance.
iSANMATE, PDS Technical Data Sheet(TDS)p. 1 - Benefits
It can maintain excellent stability even in harsh environments such as outdoor sunlight and rain, and can print text and patterns with good visual effects.
iSANMATE, PDS Technical Data Sheet(TDS)p. 1 - Benefits
Excellent heat resistance and short processing cycle
iSANMATE, PDS Technical Data Sheet(TDS)p. 1 - Benefits
Excellent hydrolysis resistance and product stability
iSANMATE, PDS Technical Data Sheet(TDS)p. 1
Nobufil PLAxStrength XY, MPa43Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²3.5IzodHDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C215–235Bed, °C55–75Chamber, °CnoneDrying, °C, h503–6 h
Nobufil PLAxNobufil
Sold as toughened or impact-modified: "Due to its impact modification PLAx offers increased tear and break resistance similar to ABS while maintaining the typical printing properties known from PLA." (Nobufil, Technical Datasheet PLAx, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Nobufil, Technical Datasheet PLAx12 valuesUnless a row says otherwise:print settingsFDM H column (the sheet does not say what H is) | |||
| Tensile strength (yield or break not stated) orientation not stated | 43 MPap. 1: Tensile strength, FDM H | ISO 527 | not in the median: set apart (never used to pass), no stated orientation |
| Tensile strength (yield or break not stated) orientation not stated | 45 MPap. 1: Tensile strength, Injection | ISO 527 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 11 %p. 1: Elongation at break, FDM H | ISO 527 | not in the median: set apart (never used to pass), no stated orientation |
| Elongation at break orientation not stated | 8 %p. 1: Elongation at break, Injection | ISO 527 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 3600 MPap. 1: Flexural modulus | ISO 178print settings not stated | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 87 MPap. 1: Flexural strength | ISO 178print settings not stated | not in the median: measured on a moulded bar |
| Izod impact strength orientation not stated | 3,5 kJ/m²p. 1: Izod Impact strength notched, FDM H | ISO 180 | not in the median: set apart (never used to pass), no stated orientation |
| Izod impact strength orientation not stated | 4,5 kJ/m²p. 1: Izod Impact strength notched, Injection | ISO 180 | not in the median: measured on a moulded bar |
| Izod impact strength orientation not stated | 25 kJ/m²p. 1: Izod Impact strength unnotched, FDM H | ISO 180 | not in the median: unnotched |
| Izod impact strength orientation not stated | 19 kJ/m²p. 1: Izod Impact strength unnotched, Injection | ISO 180 | not in the median: measured on a moulded bar |
| HDT at 1.8 MPa | 54 °Cp. 1: HDT A | ISO 75As the sheet prints it: HDT A ISO 75 | not in the median: measured on a moulded bar |
| Density | 1,19 g/cm³p. 1: Density | ISO 1183print settings not stated | |
Print settings
- Nozzle
- 215–235 °Cown data sheet
- Bed
- 55–75 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 50 °C for 3–6 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 225°C ± 10; Bed 65°C ± 10; Drying Pre-dry material for 3-6 hours at 50°C (max.).Nobufil, Technical Datasheet PLAxp. 1: Recommended printing settings; p. 1: Drying note; p. 1: Nozzle
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Benefits
Due to its impact modification PLAx offers increased tear and break resistance similar to ABS while maintaining the typical printing properties known from PLA.
Nobufil, Technical Datasheet PLAxp. 1 - Nozzle wear
Nozzle hardened
Nobufil, Technical Datasheet PLAxp. 1
3DJake mattePLAStrength XY, MPa47Strength Z, MPa—Modulus XY, GPa2.6Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C0–60Chamber, °CnoneDrying, °C, h508 h
3DJake mattePLA3DJake
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3DJake, Technical Data Sheet 3DJAKE mattePLA7 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 2600 MPap. 1: Tensile E-Modulus | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Tensile strength (yield or break not stated) orientation not stated | 47 MPap. 1: Tensile strength | ISO 527 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 19 %p. 1: Elongation at break | ISO 527As the sheet prints it: ISO 527-2 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at yield orientation not stated | 4 %p. 1: Elongation at yield | ISO 527 | listed under other properties |
| Flexural modulus orientation not stated | 2650 MPap. 1: Flexural E-Modulus | ISO 178 | not in the median: set apart (never used to pass), test bar not described as printed |
| Vicat softening temperature | 60 °Cp. 1: VICAT A (VST) | ISO 306 | |
| Melt mass-flow rate | 5 g/10minp. 1: MFR | ISO 1133 | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 0–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 200 – 230 °C; Bed ± 0 – 60 ˚C3DJake, Technical Data Sheet 3DJAKE mattePLAp. 1: Recommended printing settings
- Nozzle 200-230 ° C; Bed 0 - 60 °C3DJake, 3DJAKE mattePLA Black, 1,75 mm / 1000 gp. 1: Recommended processing temperature; p. 1: Recommended heating temperature
Price
Not in the price sample.
Its 3 documents
What the maker says (11)
- Printing advice
Easy printability: excellent adhesion and optimised print quality for detailed results.
3DJake, 3DJAKE mattePLA Black, 1,75 mm / 1000 gp. 1 - Surface finish
Matte finish
3DJake, 3DJAKE mattePLA Black, 1,75 mm / 1000 gp. 1 - Benefits
Good mechanical strength & tensile strength
3DJake, 3DJAKE mattePLA Black, 1,75 mm / 1000 gp. 1 - Benefits
Improved UV resistance
3DJake, 3DJAKE mattePLA Black, 1,75 mm / 1000 gp. 1 - Benefits
Easy to print
3DJake, 3DJAKE mattePLA Black, 1,75 mm / 1000 gp. 1 - Benefits
Easy to print PLA with matte finish in black
3DJake, 3DJAKE mattePLA Black, 1,75 mm / 1000 gp. 1 - Surface finish
Matte surface: ensures a high-quality finish and reduces visible layer lines.
3DJake, 3DJAKE mattePLA Black, 1,75 mm / 1000 gp. 1 - Benefits
Improved mechanical strength: high tensile strength, impact resistance and flexibility make it ideal for parts subject to mechanical stress
3DJake, 3DJAKE mattePLA Black, 1,75 mm / 1000 gp. 1 - Benefits
Durability: stable prints that can withstand higher stress
3DJake, 3DJAKE mattePLA Black, 1,75 mm / 1000 gp. 1 - Benefits
Improved UV resistance: protects the printed objects from discolouration and material deterioration caused by exposure to sunlight
3DJake, 3DJAKE mattePLA Black, 1,75 mm / 1000 gp. 1 - Good for
mattePLA is the ideal option for those who are looking for a reliable and versatile filament for exacting print projects.
3DJake, 3DJAKE mattePLA Black, 1,75 mm / 1000 gp. 1
Prusa Research Buddy3D PLAStrength XY, MPa53Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C50–60Chamber, °CnoneDrying, °C, hnone
Prusa Research Buddy3D PLAPrusa Research
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Prusa Research, Buddy3D Product card PLA8 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 60 MPa | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882As the sheet prints it: D882 | not in the median: measured on film |
| Tensile break strength orientation not stated | 53 MPap. 1: Breaking stress | ASTM D882 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 6 % | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882As the sheet prints it: D882 | not in the median: measured on film |
| Flexural modulus orientation not stated | 3.8 GPa | ASTM D790As the sheet prints it: D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 83 MPa | ASTM D790As the sheet prints it: D790 | not in the median: set apart (never used to pass), test bar not described as printed |
| Izod impact strength orientation not stated | 16 J/mp. 1: Notched impact strength, IZOD | ASTM D256 | not in the median: in J/m |
| HDT at 0.45 MPa | 55 °Cp. 1: Deflection temperature under load E2092 0.45 MPa °C | ASTM E2092As the sheet prints it: 0.45 MPa E2092 | not in the median: set apart (never used to pass), test bar not described as printed |
| Decomposition temperature | 250 °Cp. 2: Decomposition of PLA | no standard stated | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- not neededown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 200 – 230 °C; Bed 50 – 60 °C; Drying does not require drying before usingPrusa Research, Buddy3D Product card PLAp. 2: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Benefits
It is recommended by most producers as a starting material it has low shrink age and it doesn’t require special glue and bed heating, which makes it very easy to print.
Prusa Research, Buddy3D Product card PLAp. 1 - Benefits
very easy to print ready to use in almost every FDM 3D Printer
Prusa Research, Buddy3D Product card PLAp. 1 - Pitfalls and limitations
low temperature and chemical resistance
Prusa Research, Buddy3D Product card PLAp. 1 - Odour and emissions
It is odorless and biodegradable.
Prusa Research, Buddy3D Product card PLAp. 1 - Printing advice
Satisfying results could be achieved by using standard settings for PLA in available slicers and printers.
Prusa Research, Buddy3D Product card PLAp. 2
3DJake ecoPLA SparklingStrength XY, MPa50.8Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C35–60Chamber, °CnoneDrying, °C, h508 h
3DJake ecoPLA Sparkling3DJake
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3DJake, Technical Data Sheet 3DJAKE ecoPLA Sparkling5 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus orientation not stated | 475.737 MPa (TDS prints "475,737" with European decimal separator)physically implausiblep. 1: E-Modulus | ISO 527 | not in the median: physically implausible as published |
| Tensile yield strength orientation not stated | 50,80 MPap. 1: Tensile strength at Yield | ISO 527 | in the median |
| Elongation at break orientation not stated | 11.734 % (TDS prints "11,734" with European decimal separator)p. 1: Strain at break | ISO 527 | in the median |
| Density | 1.227 g/cc (TDS prints "1,227" with European decimal separator)p. 1: Specific gravity | ISO 1183 | |
| Melt mass-flow rate | 3,12 g/10 minp. 1: MFR 210 °C/2,16kg | moulded bar (resin supplier's value), ASTM D1238As the sheet prints it: 210 °C/2 16kg D-1238 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 35–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 210 – 230 °C; Bed If you have a heated bed the recommended temperature is ± 35-60˚C3DJake, Technical Data Sheet 3DJAKE ecoPLA Sparklingp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Warping and shrinkage
Due to its low tendency to warp 3DJAKE ecoPLA Sparkling can also be printed without a heated bed.
3DJake, Technical Data Sheet 3DJAKE ecoPLA Sparklingp. 1
3DJake magicPLAStrength XY, MPa45.8Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C35–60Chamber, °CnoneDrying, °C, h508 h
3DJake magicPLA3DJake
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3DJake, Technical Data Sheet 3DJAKE magicPLA5 valuesUnless a row says otherwise: printed specimen | |||
| Tensile modulus orientation not stated | 390 MPaphysically implausiblep. 1: E-Modulus | ISO 527 | not in the median: physically implausible as published |
| Tensile yield strength orientation not stated | 45.83 MPa (TDS prints "45,830" with European decimal separator)p. 1: Tensile strength at Yield | ISO 527 | in the median |
| Elongation at break orientation not stated | 20,4 %p. 1: Strain at break | ISO 527 | in the median |
| Density | 1.243 g/cc (TDS prints "1,243" with European decimal separator)p. 1: Specific gravity | ISO 1183 | |
| Melt mass-flow rate | 9,44 g/10 minp. 1: MFR 210 °C/2,16kg | moulded bar (resin supplier's value), ASTM D1238As the sheet prints it: 210 °C/2 16kg D-1238 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 35–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 210 – 230 °C; Bed If you have a heated bed the recommended temperature is ± 35-60˚C3DJake, Technical Data Sheet 3DJAKE magicPLAp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Warping and shrinkage
Due to its low tendency to warp 3DJAKE magicPLA can also be printed without a heated bed.
3DJake, Technical Data Sheet 3DJAKE magicPLAp. 1
Raise3D Hyper Speed PLA ProStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C60HDT 1.8, °C57Price, CAD/kg—Nozzle, °C190–230Bed, °C30–65Chamber, °CnoneDrying, °C, h50–606–12 h
Raise3D Hyper Speed PLA ProRaise3D
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
Raise3D, Raise3D Hyper Speed PLA Pro Technical Data Sheet17 valuesUnless a row says otherwise: printed specimenafter moisture conditioningConditionedas printedbefore annealedprint settingsNozzle temp.= 230 ºC; Bed temp.= 55 ºC; Print speed= 150 mm/s; Infill= 100 %; Infill angle= ±45 ° | |||
| Tensile modulus XY | 3100 ± 100 MPap. 1: Young’s modulus (MPa) (XY) | ISO 527 | not in the median: measured after moisture conditioning |
| Tensile modulus Z (ZX) | 2200 ± 150 MPap. 1: Young’s modulus (MPa) (ZX) | ISO 527 | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) XY | 37.5 ± 3.5 MPap. 1: Tensile strength (MPa) (XY) | ISO 527 | not in the median: measured after moisture conditioning |
| Tensile strength (yield or break not stated) Z (ZX) | 20.5 ± 4.5 MPap. 1: Tensile strength (MPa) (ZX) | ISO 527 | not in the median: measured after moisture conditioning |
| Elongation at break XY | 16.0 ± 8.0 %p. 1: Elongation at break (%) (XY) | ISO 527 | not in the median: measured after moisture conditioning |
| Elongation at break Z (ZX) | 3.0 ± 1.5 %p. 1: Elongation at break (%) (ZX) | ISO 527 | not in the median: measured after moisture conditioning |
| Flexural modulus XY | 3050 ± 150 MPap. 1: Bending modulus (MPa) (XY) | ISO 178 | not in the median: measured after moisture conditioning |
| Flexural modulus ZX | 2000 ± 200 MPap. 1: Bending modulus (MPa) (ZX) | ISO 178 | not in the median: measured after moisture conditioning |
| Flexural strength XY | 68.5 ± 2.5 MPap. 1: Bending strength (MPa) (XY) | ISO 178 | not in the median: measured after moisture conditioning |
| Flexural strength ZX | 45.5 ± 3.5 MPap. 1: Bending strength (MPa) (ZX) | ISO 178 | not in the median: measured after moisture conditioning |
| Charpy impact strength XY | 15.5 ± 4.5 kJ/m²p. 1: Charpy impact strength (kJ/m²) (XY) | ISO 179 | not in the median: measured after moisture conditioning |
| Charpy impact strength ZX | 5.0 ± 2.0 kJ/m²p. 1: Charpy impact strength (kJ/m²) (ZX) | ISO 179 | not in the median: measured after moisture conditioning |
| HDT at 0.45 MPa | 60.0 ± 2.0 °Cp. 2: Heat distortion temperature (°C) (60.0 ± 2.0) | ISO 75As the sheet prints it: ISO 75; 0.45 MPa | in the median |
| HDT at 1.8 MPa | 56.8 ± 2.0 °Cp. 2: Heat distortion temperature (°C) (56.8 ± 2.0) | ISO 75As the sheet prints it: ISO 75; 1.8 MPa | in the median |
| Density | 1.21 g/cm³p. 1: Density | specimen not stated, ISO 1183, GB/T 1033moisture state not statedtreatment not statedprint settings not stated | |
| Water absorption | 0.45 %p. 1: Water absorption (%) | specimen not stated, ISO 62As the sheet prints it: ISO 62: Method 1 | |
| Melt mass-flow rate | 4.0 - 6.5 g/10 minp. 2: Melt flow index (g/10 min) | specimen not stated, no standard namedAs the sheet prints it: 2.16 kg | |
Print settings
- Nozzle
- 190–230 °CBambu Lab Filament Guide
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 50–60 °C for 6–12 hown data sheet
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Drying Please dry the filament at 50 - 60 ºC for 6 - 12 hoursRaise3D, Raise3D Hyper Speed PLA Pro Technical Data Sheetp. 1: the notes under the test specimens' conditions, the sheet's only printing guidance; p. 2: Drying note; p. 2: Nozzle note. Its nozzle and bed temperatures are the specimens' print conditions, which are not printing guidance.
Price
Not in the price sample.
Its 2 documents
What the maker says (7)
- Good for
This material is ideal for rapid prototyping and the rapid production of small exterior parts without the need for molds.
Raise3D, Raise3D Hyper Speed PLA Pro Technical Data Sheetp. 1 - Surface finish
The addition of carbon powder and other additives enhances the matte finish surface, and after using the ironing function, the surface smoothness can be significantly improved.
Raise3D, Raise3D Hyper Speed PLA Pro Technical Data Sheetp. 1 - Adhesion between layers
Additionally, while the interlayer adhesion is slightly lower than Premium PLA, the material outperforms Premium PLA in terms of rigidity, tensile strength, and impact resistance.
Raise3D, Raise3D Hyper Speed PLA Pro Technical Data Sheetp. 1 - Odour and emissions
Odor / Almost odorless
Raise3D, Raise3D Hyper Speed PLA Pro Technical Data Sheetp. 1 - Moisture sensitivity
After drying, we recommend storing the filament into Raise3D Filament Dry Box during the printing.
Raise3D, Raise3D Hyper Speed PLA Pro Technical Data Sheetp. 2 - Moisture sensitivity
It is recommended to put the Hyper Speed PLA Pro that will not be used in the short term back into the original packaging bag and seal it for storage.
Raise3D, Raise3D Hyper Speed PLA Pro Technical Data Sheetp. 2 - Nozzle wear
Using abrasion resistance nozzle, such as hardened steel and above grade nozzle is highly recommended.
Raise3D, Raise3D Hyper Speed PLA Pro Technical Data Sheetp. 2
Spectrum THE FILAMENT PLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C185–215Bed, °C40–50Chamber, °CnoneDrying, °C, h508 h
Spectrum THE FILAMENT PLASpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA7 values | |||
| Tensile modulus orientation not stated | 3.2 Gpap. 1: Tensile Modulus | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
| Tensile yield strength orientation not stated | 58 MPap. 1: Tensile Yield Strength | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
| Tensile break strength orientation not stated | 45 MPap. 1: Tensile Strength at Break | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
| HDT | 55 °Cp. 1: Heat Distortion Temperature | ASTM E2092As the sheet prints it: E 2092 | not in the median: set apart (never used to pass), test bar not described as printed |
| Glass transition temperature | 60 °Cp. 1: Glass Transition Temperature | ASTM D3418As the sheet prints it: D3418 | in the median |
| Density | 1.24 g/cm3p. 1: Specific Gravity | ASTM D792As the sheet prints it: D 792 | |
| Melt mass-flow rate | 4 g/10minp. 1: MFR | ASTM D1238As the sheet prints it: D 1238 | |
| Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA1 value | |||
| Elongation at break orientation not stated | 5 %p. 1: Tensile Elongation | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
Print settings
- Nozzle
- 185–215 °Cown data sheet
- Bed
- 40–50 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 185-215°C; Bed 40-50°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT PLAp. 1: Recommended printing settings; p. 1: * settings are based on a 0,4 mm nozzle
- Nozzle 185-215°C; Bed 40-50°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT PLAp. 1: Recommended printing settings; p. 1: Dry box recommended; p. 1: Adhesive; p. 1: settings footnote
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Benefits
biodegradable, user friendly, best choice for everyday use
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLAp. 1 - Surface finish
Surface finish shiny
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLAp. 1 - Moisture sensitivity
Dry box recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLAp. 1 - Nozzle wear
Ruby or hardened nozzle recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLAp. 1
FormFutura EasyFil PLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C180–220Bed, °C30–65Chamber, °CnoneDrying, °C, h508 h
FormFutura EasyFil PLAFormFutura
Data sheet shared with FormFutura MagicFil Thermo PLA and FormFutura ReForm - rPLA: their values are one table, recorded once.
Sold as toughened or impact-modified: "With retaining the typical PLA features, EasyFil™ PLA is slightly modified with an impact modifier, making the filament tougher, less rigid, slightly softer and therefore “easy to print” at relatively low temperatures." (FormFutura, Technical Data Sheet EasyFil™ PLA, p. 1). The maker's statement, not a test result.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet EasyFil™ PLA10 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3310 Mpap. 1: Tensile modulus | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882 | not in the median: measured on film |
| Tensile strength (yield or break not stated) orientation not stated | 110 Mpap. 1: Tensile strength | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882 | not in the median: measured on film |
| Elongation at break orientation not stated | 160 %p. 1: Elongation at break | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882 | not in the median: measured on film |
| Flexural modulus orientation not stated | 2392.5 Mpap. 1: Flexural modulus ± | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 55.2 Mpap. 1: Flexural strength ± | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Impact strength, test unclear | 7.5 KJ/m²p. 1: Impact strength | no standard statedWhich test: cannot tell | listed under other properties |
| Vicat softening temperature | 60° C °Cp. 1: Viscat softening temp. | ISO 306 | |
| Melting temperature | 210 ± 10° C °Cp. 1: Melting termperature | no standard stated | |
| Density | 1.24 g/ccp. 1: Specific gravity | ASTM D1505 | |
| Melt mass-flow rate | 6.0 g/10minp. 1: Melt flow rate | no standard stated | |
| FormFutura, Technical Data Sheet ReForm™ - rPLA1 value | |||
| Impact strength, test unclear orientation not stated | 7.5 KJ/m²p. 1: Impact strength | no standard statedWhich test: cannot tell | listed under other properties |
Print settings
- Nozzle
- 180–220 °Cown data sheet
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle ± 180 - 220° CFormFutura, Technical Data Sheet EasyFil™ PLAp. 1: Recommended printing settings
Price
Not in the price sample.
Its 3 documents
What the maker says (3)
- Benefits
With retaining the typical PLA features, EasyFil™ PLA is slightly modified with an impact modifier, making the filament tougher, less rigid, slightly softer and therefore “easy to print” at relatively low temperatures.
FormFutura, Technical Data Sheet EasyFil™ PLAp. 1 - Benefits
By being slightly modified, EasyFil™ PLA is much longer preservable than normal PLA.
FormFutura, Technical Data Sheet EasyFil™ PLAp. 1 - Warping and shrinkage
Another great advantage of EasyFil™ PLA - compared to regular PLA - is EasyFil™’s low shrinkage factor, which makes EasyFil™ PLA nearly warp-free and therefore EasyFil™ PLA will not deform after cooling.
FormFutura, Technical Data Sheet EasyFil™ PLAp. 1
FormFutura MagicFil Thermo PLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C180–220Bed, °C30–65Chamber, °CnoneDrying, °C, h508 h
FormFutura MagicFil Thermo PLAFormFutura
Data sheet shared with FormFutura EasyFil PLA and FormFutura ReForm - rPLA: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 180–220 °Cown data sheet
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle ± 180 - 220° CFormFutura, Technical Data Sheet MagicFil™ Thermo PLAp. 1: Print temperature
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Benefits
MagicFil™ Thermo PLA is an “easy to use” high-end PLA (Poly-Lactic Acid ) type of 3D printer filament, which is slightly modified with an impact modifier, making the filament tougher, less rigid, slightly softer and therefore “easy to print” at relatively low temperatures.
FormFutura, Technical Data Sheet MagicFil™ Thermo PLAp. 1 - Benefits
As its name implies, MagicFil™ Thermo PLA has an unique and remarkable thermochrome feature as the filament, or printed object will change from colour at a temperature of 29˚C.
FormFutura, Technical Data Sheet MagicFil™ Thermo PLAp. 1 - Warping and shrinkage
MagicFil™ Thermo PLA is nearly warp-free and will not deform after cooling.
FormFutura, Technical Data Sheet MagicFil™ Thermo PLAp. 1
FormFutura Matt PLAStrength XY, MPa46Strength Z, MPa—Modulus XY, GPa3.97Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C215–235Bed, °C30–65Chamber, °CnoneDrying, °C, h508 h
FormFutura Matt PLAFormFutura
Modified: cosmetic dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet Matt PLA6 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3973 Mpap. 1: Tensile modulus | ISO 527 | not in the median: added filler or additive |
| Tensile yield strength orientation not stated | 46 Mpap. 1: Tensile strength | ISO 527 | not in the median: added filler or additive |
| Impact strength, test unclear | 3.0 KJ/m²p. 1: Impact strength ± | no standard statedWhich test: cannot tell | listed under other properties |
| Vicat softening temperature | 57° C °Cp. 1: Viscat softening temp. | no standard stated | |
| Density | 1.38 g/ccp. 1: Specific gravity | ISO 1183 | |
| Melt mass-flow rate | 14 g/10minp. 1: Melt flow rate | ISO 1133 | |
Print settings
- Nozzle
- 215–235 °Cown data sheet
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle ± 215 - 235° CFormFutura, Technical Data Sheet Matt PLAp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Surface finish
Formfutura Matt PLA (polylactic acid) is modified to have a rough and matt surface finish.
FormFutura, Technical Data Sheet Matt PLAp. 1 - Surface finish
Matt PLA has excellent 3D printing properties and combines a distinguished surface quality with fine details reinforced by its matt appearance.
FormFutura, Technical Data Sheet Matt PLAp. 1
FormFutura Premium PLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–225Bed, °C30–65Chamber, °CnoneDrying, °C, h508 h
FormFutura Premium PLAFormFutura
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, Technical Data Sheet Premium PLA10 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 3145 Mpap. 1: Tensile modulus | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882 | not in the median: measured on film |
| Tensile strength (yield or break not stated) orientation not stated | 105 Mpap. 1: Tensile strength | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882 | not in the median: measured on film |
| Elongation at break orientation not stated | 175 %p. 1: Elongation at break | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882 | not in the median: measured on film |
| Flexural modulus orientation not stated | 2364.3 Mpap. 1: Flexural modulus ± | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural strength orientation not stated | 54.4 Mpap. 1: Flexural strength ± | no standard stated | not in the median: set apart (never used to pass), test bar not described as printed |
| Impact strength, test unclear | 6.0 KJ/m²p. 1: Impact strength | no standard statedWhich test: cannot tell | listed under other properties |
| Vicat softening temperature | 62° C °Cp. 1: Viscat softening temp. | ISO 306 | |
| Melting temperature | 210 ± 10° C °Cp. 1: Melting termperature | no standard stated | |
| Density | 1.24 g/ccp. 1: Specific gravity | ASTM D1505 | |
| Melt mass-flow rate | 6.0 g/10minp. 1: Melt flow rate | no standard stated | |
Print settings
- Nozzle
- 190–225 °Cown data sheet
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle ± 190- 225° CFormFutura, Technical Data Sheet Premium PLAp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Benefits
Premium PLA has an excellent thermal stability and slightly faster crystallization process than modified PLA type of filaments.
FormFutura, Technical Data Sheet Premium PLAp. 1 - Benefits
This makes Premium PLA more suitable for 3D printing slightly more complex structures which require an increased hardening process of the layered filament.
FormFutura, Technical Data Sheet Premium PLAp. 1 - Warping and shrinkage
Premium PLA is nearly warp-free and therefore it will not deform after cooling.
FormFutura, Technical Data Sheet Premium PLAp. 1 - Surface finish
The Premium PLA colour palette is semi-transparent coloured, as the PLA filament is kept as pure as possible.
FormFutura, Technical Data Sheet Premium PLAp. 1 - Surface finish
Gloss 80 ASTM D1003 Gloss, 20°
FormFutura, Technical Data Sheet Premium PLAp. 1
FormFutura ReForm - rPLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C180–220Bed, °C30–65Chamber, °CnoneDrying, °C, h508 h
FormFutura ReForm - rPLAFormFutura
Data sheet shared with FormFutura EasyFil PLA and FormFutura MagicFil Thermo PLA: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 180–220 °Cown data sheet
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle ± 180 - 220° CFormFutura, Technical Data Sheet ReForm™ - rPLAp. 1: Print temperature
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Surface finish
Gloss 90 ASTM D1003
FormFutura, Technical Data Sheet ReForm™ - rPLAp. 1
Spectrum THE FILAMENT PLA HSStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²5HDT 0.45, °C60HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C40–55Chamber, °CnoneDrying, °C, h508 h
Spectrum THE FILAMENT PLA HSSpectrum
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA HS7 values | |||
| Tensile modulus orientation not stated | 3450 MPap. 1: Tensile Modulus | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
| Tensile strength (yield or break not stated) orientation not stated | 51 MPap. 1: Tensile Strength | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
| Elongation at break orientation not stated | 5 %p. 1: Elongation at Break | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
| Charpy impact strength | 5 kJ/m2p. 1: Charpy notched impact strength, 23°C | ASTM D882As the sheet prints it: 23°C D 882 | not in the median: set apart (never used to pass), test bar not described as printed |
| HDT at 0.45 MPa | 60 °Cp. 1: Heat deflection temperature (0.45MPa) | ASTM E2092As the sheet prints it: 0.45MPa E 2092 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm3p. 1: Density | ASTM D792As the sheet prints it: D 792 | |
| Melt mass-flow rate | 23 g/10minp. 1: MFR (210°C, 2.16kg) | ASTM D1238As the sheet prints it: 210°C 2.16kg D 1238 | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 40–55 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 190-220°C; Bed 40-55°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT PLA HSp. 1: Recommended printing settings: Nozzle temperature; p. 1: * settings are based on a 0,4 mm nozzle
- Nozzle 225-250°C; Bed 40-55°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT PLA HSp. 1: Recommended printing settings: Nozzle temperature (High Speed); p. 1: * settings are based on a 0,4 mm nozzle
- Nozzle 190-220°C; Bed 40-55°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT PLA HSp. 1: Recommended printing settings; p. 1: Dry box recommended; p. 1: Adhesive; p. 1: settings footnote; p. 1: Nozzle temperature (High Speed)
Price
Not in the price sample.
Its 3 documents
What the maker says (4)
- Benefits
efficient and high speed 3D printing up to 600mm/s
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA HSp. 1 - Surface finish
Surface finish shiny / matte
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA HSp. 1 - Moisture sensitivity
Dry box recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA HSp. 1 - Nozzle wear
Ruby or hardened nozzle recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA HSp. 1
3DJake mysteryPLAStrength XY, MPa44.8Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C35–60Chamber, °CnoneDrying, °C, h508 h
3DJake mysteryPLA3DJake
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| 3DJake, Technical Data Sheet 3DJAKE mysteryPLA5 values | |||
| Tensile modulus orientation not stated | 379.426 MPa (TDS prints "379,426" with European decimal separator)physically implausiblep. 1: E-Modulus | ISO 527 | not in the median: physically implausible as published |
| Tensile yield strength orientation not stated | 44.763 MPa (TDS prints "44,763" with European decimal separator)p. 1: Tensile strength at Yield | ISO 527 | in the median |
| Elongation at break orientation not stated | 19.951 % (TDS prints "19,951" with European decimal separator)p. 1: Strain at break | ISO 527 | in the median |
| Density | 1.234 g/cc (TDS prints "1,234" with European decimal separator)p. 1: Specific gravity | ISO 1183 | |
| Melt mass-flow rate | 9,84 g/10 minp. 1: MFR 210 °C/2,16kg | ASTM D1238As the sheet prints it: 210 °C/2 16kg D-1238 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 35–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 210 – 230 °C; Bed If you have a heated bed the recommended temperature is ± 35-60˚C3DJake, Technical Data Sheet 3DJAKE mysteryPLAp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (1)
- Warping and shrinkage
Due to its low tendency to warp 3DJAKE mysteryPLA can also be printed without a heated bed.
3DJake, Technical Data Sheet 3DJAKE mysteryPLAp. 1
Copper3D PLACTIVEStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–210Bed, °C0–60Chamber, °CnoneDrying, °C, h508 h
Copper3D PLACTIVECopper3D
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Copper3D, PLACTIVE Antibacterial Nanocomposite12 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus | 524,000 (3.6) psi (MPa)p. 4: Tensile Modulus | ASTM D882As the sheet prints it: D882 | not in the median: measured on a moulded bar |
| Tensile yield strength | 8700 (60) psi (MPa)p. 4: Tensile Yield Strength | ASTM D882As the sheet prints it: D882 | not in the median: measured on a moulded bar |
| Tensile break strength | 7700 (53) psi (MPa)p. 4: Tensile Strength at Break | ASTM D882As the sheet prints it: D882 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 6 %p. 4: Tensile Elongation, % | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882As the sheet prints it: D882 | not in the median: measured on film |
| Flexural modulus | 555,000 (3.8) psi (MPa)p. 4: Flexural Modulus | ASTM D790As the sheet prints it: D790 | not in the median: measured on a moulded bar |
| Flexural strength | 12,000 (83) psi (MPa)p. 4: Flexural Strength | ASTM D790As the sheet prints it: D790 | not in the median: measured on a moulded bar |
| Izod impact strength | 0.3 (16) ft-lb/inp. 4: Notched Izod Impact, ft-lb/in (J/m) | ASTM D256As the sheet prints it: D256 | not in the median: in J/m |
| HDT at 0.45 MPa | 55 °Cp. 4: Heat Distortion Temperature | ASTM E2092As the sheet prints it: E2092; 66 psi (0.45 MPa) | not in the median: measured on a moulded bar |
| Glass transition temperature | 55-60 °Cp. 4: Glass Transition Temperature, °C | specimen not stated, ASTM D3418As the sheet prints it: D3418 | in the median |
| Melting temperature | 145-160 °Cp. 4: Peak Melt Temperature | ASTM D3418As the sheet prints it: D3418 | |
| Density | 1.24 g/ccp. 4: Specific Gravity, g/cc | specimen not stated, ASTM D792As the sheet prints it: D792 | |
| Melt mass-flow rate | 6 g/10 minp. 4: MFR, g/10 min | specimen not stated, ASTM D1238As the sheet prints it: D1238 | |
Print settings
- Nozzle
- 190–210 °Cown data sheet
- Bed
- 0–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190 - 210 °C; Bed ± 0 - 60 °CCopper3D, PLACTIVE Antibacterial Nanocompositep. 4: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Benefits
Copper3D uses the best Nano-Copper additive in the world, functionalized and improved to provide the best antibacterial action against a wide range of microorganisms.
Copper3D, PLACTIVE Antibacterial Nanocompositep. 2 - Good for
Clinically tested in prosthesis for amputees with excellent results.
Copper3D, PLACTIVE Antibacterial Nanocompositep. 3 - Good for
Ideal for the manufacture of other medical applications where it’s dangerous to have bacterial contamination, such as postoperative prostheses, wound dressing and surgical equipment.
Copper3D, PLACTIVE Antibacterial Nanocompositep. 3 - Benefits
It has thermoforming characteristics that facilitates post-processing and final adjustments of the 3D printed application.
Copper3D, PLACTIVE Antibacterial Nanocompositep. 3
Extrudr PLA HIGH-SPEEDStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C≤ 250Bed, °C20–60Chamber, °CnoneDrying, °C, h508 h
Extrudr PLA HIGH-SPEEDExtrudr
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEED7 valuesThe same values also in Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEED and Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEED.Unless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus | 3500 MPap. 1: Tensile modulus ISO 527-1 MPaalso in Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEED | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a moulded bar |
| Tensile strength (yield or break not stated) | 50 MPap. 1: Tensile strength ISO 527-1 MPaalso in Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEED | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a moulded bar |
| Elongation at break | 5 %p. 1: Elongation at break ISO 527-1 %also in Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEED | ISO 527As the sheet prints it: ISO 527-1 | not in the median: measured on a moulded bar |
| Charpy impact strength | 5 kJ/m2p. 1: Charpy notched impact, 23°C ISO 179-1eA kJ/m2also in Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEED | ISO 179As the sheet prints it: 23°C kJ/m2 ISO 179-1eA | not in the median: measured on a moulded bar |
| Melting temperature | 175 °Cp. 1: Melting temperature DSC °Calso in Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEEDalso in Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEED | DSCAs the sheet prints it: DSC °C | |
| Density | 1.24 g/cm3p. 1: Density ISO 1183 g/cm3also in Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEED | ISO 1183 | |
| Melt mass-flow rate | 23 g/10minp. 1: Melt flow index (MFI) ISO 1133-A g/10minalso in Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEEDalso in Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEED | ISO 1133As the sheet prints it: MFI g/10min ISO 1133-A | |
| Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEED2 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| HDT at 0.45 MPa | 60 °Cp. 1: HTB, amorphous | ISO 75As the sheet prints it: ISO 75-1; 0.45MPa; method B; flatwise | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 105 °Cp. 1: HTB, crystalline | ISO 75As the sheet prints it: ISO 75-1; 0.45MPa; method B; flatwise | not in the median: measured on a moulded bar |
| Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEED1 valueThe same values also in Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEED. | |||
| Glass transition temperature | 60 °Cp. 1: Glass transition temperature DSC °Calso in Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEED | DSC | in the median |
Print settings
- Nozzle
- 250 °Cown data sheet
- Bed
- 20–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle up to 250°C; Bed 20-60°CExtrudr, TECHNICAL DATA SHEET PLA HIGH-SPEEDp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Recommended settings for printers with a 0.4mm Nozzle
- Nozzle up to 250°C; Bed 20-60°CExtrudr, TECHNICAL DATA SHEET PLA HIGH-SPEEDp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Recommended settings for printers with a 0.4mm Nozzle
- Nozzle up to 250°C; Bed 20-60°CExtrudr, TECHNICAL DATA SHEET PLA HIGH-SPEEDp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Recommended settings for printers with a 0.4mm Nozzle
Price
Not in the price sample.
Its 4 documents
What the maker says (6)
- Good for
Its superior flow characteristics and rapid cooling make it perfect for applications that require both efficiency and high quality, such as prototyping, design concept visualization, decorative objects, and functional parts.
Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEEDp. 1 - Benefits
Quick cooling for complex shapes and overhangs
Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEEDp. 1 - Benefits
PLA High-Speed is a specifically designed filament for fast 3D printing.
Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEEDp. 1 - Benefits
Biodegradable (EN 13432)
Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEEDp. 1 - Precision and tolerance
It enables more precise and detailed printing results at far higher speeds than standard PLA.
Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEEDp. 1 - Nozzle wear
Hardened Nozzle no
Extrudr, TECHNICAL DATA SHEET PLA HIGH-SPEEDp. 1
Fabru Polylactide (PLA)Strength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C50Chamber, °CnoneDrying, °C, h604 h
Fabru Polylactide (PLA)Fabru
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Fabru, Polylactide (PLA)7 values | |||
| Tensile modulus orientation not stated | 3610 MPap. 1: Tensile modulus (ASTM D882) | ASTM D882 | not in the median: measured on film |
| Tensile yield strength orientation not stated | 60 MPap. 1: Yield stress (ASTM D882) | ASTM D882 | not in the median: measured on film |
| Elongation at break orientation not stated | 6 %p. 1: Elongation at break (ASTM D882) | ASTM D882 | not in the median: measured on film |
| Elongation at yield orientation not stated | 6 %p. 1: Elongation at yield (ASTM D882) | ASTM D882 | listed under other properties |
| HDT at 0.45 MPa | 55 °Cp. 1: Heat deflection temperature | ASTM E2092As the sheet prints it: 0.45 MPa (ASTM E2092) | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm3p. 1: Density (ASTM D792) | ASTM D792 | |
| Melt mass-flow rate | 6 g/10minp. 1: MFR (ASTM D1238) | ASTM D1238 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 50 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- 60 °C for 4 hown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Differs in another document of this product, not used in deciding (a data sheet speaks before a product page, a newer edition before an older one): bed in Fabru, purefil PLA stahlblau 1kg 1.75 mm.
Its 3 print profiles, in the documents' words
- Nozzle 190-230 ° C; Bed 50-70 ° CFabru, purefil PLA stahlblau 1kg 1.75 mmp. 1: Nozzle temperature; p. 1: Printing table temperature
- Nozzle 190-230 °C; Bed Nicht benötigt, 50 °C empfohlen; Drying 60°C | 4hFabru, Polylactide (PLA)p. 1: Printing temperature; p. 1: Heated bed temperature; p. 1: Drying temperature / Drying time
- Nozzle 190-230 °C; Bed Nicht benötigt, 50 °C empfohlen; Drying 60°C; 4hFabru, Polylactide (PLA)p. 1: Drucktemperatur; p. 1: Heizbett Temperatur; p. 1: Trocknungstemperatur / Trocknungsdauer
Price
Not in the price sample.
Its 4 documents
What the maker says (21)
- Benefits
As a starting material, PLA is fundamentally biodegradable under special conditions.
Fabru, Polylactide (PLA)p. 1 - Benefits
Ideal material for beginners
Fabru, Polylactide (PLA)p. 1 - Pitfalls and limitations
Even at high temperatures in summer, PLA parts can deform!
Fabru, Polylactide (PLA)p. 1 - Pitfalls and limitations
Can become soft again from 60 degrees
Fabru, Polylactide (PLA)p. 1 - Pitfalls and limitations
Due to its hardness also more brittle and rather brittle
Fabru, Polylactide (PLA)p. 1 - Warping and shrinkage
less distortion than ABS
Fabru, Polylactide (PLA)p. 1 - Odour and emissions
Furthermore, PLA is characterized by many times more pleasant odor properties than other plastics during processing.
Fabru, Polylactide (PLA)p. 1 - Printing advice
A heated bed is advantageous for PLA filament, but not essential.
Fabru, Polylactide (PLA)p. 1 - Odour and emissions
Furthermore, PLA is characterized by many times more pleasant odor properties
Fabru, purefil PLA stahlblau 1kg 1.75 mmp. 1 - Benefits
The use of high-quality raw materials creates a 3D printer filament that is particularly easy to process.
Fabru, purefil PLA stahlblau 1kg 1.75 mmp. 1 - Precision and tolerance
Using a state-of-the-art manufacturing process, very low manufacturing tolerances are achieved, which leads to convincing printing results with all FDM 3D printers.
Fabru, purefil PLA stahlblau 1kg 1.75 mmp. 1 - Precision and tolerance
small diameter and roundness tolerances
Fabru, purefil PLA stahlblau 1kg 1.75 mmp. 1 - Benefits
easy to print
Fabru, purefil PLA stahlblau 1kg 1.75 mmp. 1 - Warping and shrinkage
minimal shrinkage
Fabru, purefil PLA stahlblau 1kg 1.75 mmp. 1 - Warping and shrinkage
little delay
Fabru, purefil PLA stahlblau 1kg 1.75 mmp. 1 - Moisture sensitivity
Low water absorption
Fabru, purefil PLA stahlblau 1kg 1.75 mmp. 1 - Benefits
High UV resistance
Fabru, purefil PLA stahlblau 1kg 1.75 mmp. 1 - Benefits
Low flammability
Fabru, purefil PLA stahlblau 1kg 1.75 mmp. 1 - Benefits
Heat resistance up to approx. 60°C
Fabru, purefil PLA stahlblau 1kg 1.75 mmp. 1 - Printing advice
We recommend using an air cooler when processing PLA filament.
Fabru, purefil PLA stahlblau 1kg 1.75 mmp. 1 - Pitfalls and limitations
However, the temperature below which PLA starts to soften is relatively low.
Fabru, purefil PLA stahlblau 1kg 1.75 mmp. 1
FormFutura Bulk PLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C58HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–225Bed, °C50–60Chamber, °CnoneDrying, °C, hnone
FormFutura Bulk PLAFormFutura
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| FormFutura, TECHNICAL DATA SHEET Bulk PLA5 values | |||
| Tensile modulus orientation not stated | 3400 MPap. 1: Tensile modulus | ASTM D882 | not in the median: measured on film |
| Tensile strength (yield or break not stated) orientation not stated | 47 MPap. 1: Tensile strength | ASTM D882 | not in the median: measured on film |
| Elongation at break orientation not stated | 5,5 %p. 1: Tensile elongation at break | ASTM D882 | not in the median: measured on film |
| HDT | 58 °Cp. 1: HDT | ASTM D648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm3p. 1: Specific Gravity | ASTM D792As the sheet prints it: D 792 | |
Print settings
- Nozzle
- 200–225 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- not neededown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle ± 200 - 225°C; Bed ± 50 - 60°C; Drying Not necessaryFormFutura, TECHNICAL DATA SHEET Bulk PLAp. 1: Recommended printing settings; p. 1: Nozzle; p. 1: Buildplate adhesion
Price
Not in the price sample.
Its 2 documents
What the maker says (6)
- Good for
Perfect for both large-scale additive manufacturing and small-batch prototyping.
FormFutura, TECHNICAL DATA SHEET Bulk PLAp. 1 - Good for
Prototyping & Product Development – 3D print accurate models and functional prototypes with high quality PLA filament.
FormFutura, TECHNICAL DATA SHEET Bulk PLAp. 1 - Good for
Ideal for visual models, sculptures, and hobbyist 3D printing.
FormFutura, TECHNICAL DATA SHEET Bulk PLAp. 1 - Good for
Manufacturing Aids & Jigs – Custom tools and fixtures to support production processes.
FormFutura, TECHNICAL DATA SHEET Bulk PLAp. 1 - Benefits
Experience level: Beginner
FormFutura, TECHNICAL DATA SHEET Bulk PLAp. 1 - Moisture sensitivity
Drying: Not necessary Drybox: Not necessary
FormFutura, TECHNICAL DATA SHEET Bulk PLAp. 1
nice essentials PLA BasicStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C55HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C20–60Chamber, °CnoneDrying, °C, h508 h
nice essentials PLA Basicnice essentials
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| nice essentials, Technical Data Sheet: PLA Basic10 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile modulus orientation not stated | 500 (3,5) MPaphysically implausiblep. 1: Tensile modulus | ASTM D882 | not in the median: physically implausible as published |
| Tensile strength (yield or break not stated) orientation not stated | 53 MPap. 1: Tensile strength | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882 | not in the median: measured on film |
| Tensile yield strength orientation not stated | 60 MPap. 1: Yield stress | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882 | not in the median: measured on film |
| Elongation at yield orientation not stated | 6 %p. 1: Elongation at yield | Film specimen (ASTM D882); not a printed or moulded bar, ASTM D882 | listed under other properties |
| Izod impact strength | 0,3 kJ/m²p. 1: Impact strength | ASTM D256 | not in the median: notch not stated |
| HDT | 55 °Cp. 1: HDT | ASTM E2092As the sheet prints it: E2092 | not in the median: set apart (never used to pass), test bar not described as printed |
| Melting temperature | 180-200 °Cp. 1: Melting temperature | ISO 3146As the sheet prints it: ISO 3146-C | |
| Density | 1,24 g/cm³p. 1: Density | ASTM D792 | |
| Melt mass-flow rate | 6 g/10minp. 1: MFR | ASTM D1238 | |
| Mould shrinkage orientation not stated | 0,4 %p. 1: Shrinking | ASTM D955 | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 20–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 200-230 °C; Bed 20-60 °Cnice essentials, Technical Data Sheet: PLA Basicp. 1: Recommended printing settings; p. 1: Heated Bed; p. 1: Hardened nozzle
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Benefits
The material is easy to process, supports high-speed printing up to 350 mm/s
nice essentials, Technical Data Sheet: PLA Basicp. 1 - Surface finish
delivers a glossy surface with fine details.
nice essentials, Technical Data Sheet: PLA Basicp. 1 - Nozzle wear
Hardened nozzle not required
nice essentials, Technical Data Sheet: PLA Basicp. 1 - Printing advice
Enclosure not required
nice essentials, Technical Data Sheet: PLA Basicp. 1
Spectrum THE FILAMENT PLA LiteStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C56HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C40–50Chamber, °CnoneDrying, °C, h508 h
Spectrum THE FILAMENT PLA LiteSpectrum
Data sheet shared with The Filament PLA Lite: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Lite5 values | |||
| Tensile modulus orientation not stated | 3400 MPap. 1: Tensile Modulus | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
| Tensile strength (yield or break not stated) orientation not stated | 47 MPap. 1: Tensile Strength | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
| Elongation at break orientation not stated | 5,5 %p. 1: Elongation at Break | ASTM D882As the sheet prints it: D 882 | not in the median: measured on film |
| HDT | 56 °Cp. 1: Heat Deflection Temperature | ASTM D648As the sheet prints it: D 648 | not in the median: set apart (never used to pass), test bar not described as printed |
| Density | 1.24 g/cm3p. 1: Specific Gravity | ASTM D792As the sheet prints it: D 792 | |
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 40–50 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 195-220°C; Bed 40-50°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Litep. 1: Recommended printing settings; p. 1: Dry box recommended; p. 1: Adhesive; p. 1: settings footnote
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Surface finish
Surface finish shiny
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Litep. 1 - Moisture sensitivity
Dry box recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Litep. 1 - Nozzle wear
Ruby or hardened nozzle recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Litep. 1
The Filament PLA LiteStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C56HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195–220Bed, °C40–50Chamber, °CnoneDrying, °C, h508 h
The Filament PLA LiteThe Filament
Data sheet shared with Spectrum THE FILAMENT PLA Lite: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 195–220 °Cown data sheet
- Bed
- 40–50 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 195-220°C; Bed 40-50°CSpectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Litep. 1: Nozzle temperature, Bed temperature, Closed chamber for printing, Ruby or hardened nozzle; p. 1: Dry box recommended; p. 1: * settings are based on a 0,4 mm nozzle.
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Surface finish
Surface finish shiny
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Litep. 1 - Moisture sensitivity
Dry box recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Litep. 1 - Nozzle wear
Ruby or hardened nozzle recommended: No
Spectrum, TECHNICAL DATA SHEET THE FILAMENT PLA Litep. 1
iSANMATE PLA i5+Strength XY, MPa48.5Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C30–65Chamber, °CnoneDrying, °C, h508 h
iSANMATE PLA i5+iSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, PLA i5+ Filament Technical Data Sheet5 valuesUnless a row says otherwise: specimen not stated | |||
| Tensile strength (yield or break not stated) orientation not stated | 48.5 MPap. 1: Tensile Strength | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Elongation at break orientation not stated | 2.5 %p. 1: Break Elongation | ASTM D638 | not in the median: set apart (never used to pass), test bar not described as printed |
| Flexural modulus orientation not stated | 69 MPaphysically implausiblep. 1: Flexural Modulus | ASTM D790 | not in the median: physically implausible as published |
| Melting temperature | 150-165 ℃p. 1: Melting Point | DSC | |
| Melt mass-flow rate | 10-20 g/10minp. 1: Melt Flow Index | ASTM D1238As the sheet prints it: 190℃ 2160g) ASTM D-1238 | |
Print settings
- Nozzle
- 190–230 °CBambu Lab Filament Guide
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
What the maker says (1)
- Surface finish
CPLA has good gloss and good processing performance
iSANMATE, PLA i5+ Filament Technical Data Sheetp. 1
eSUN eMarbleStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C45–60Chamber, °CnoneDrying, °C, h508 h
eSUN eMarbleeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, eMarble Technical Data Sheet2 values | |||
| Tensile strength (yield or break not stated) orientation not stated | 53 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Density | 1.24 g/cm3p. 1: Density GB/T 1033 | GB/T 1033 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-230℃; Bed 45-60°CeSUN, eMarble Technical Data Sheetp. 2: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Good for
Toys
eSUN, eMarble Technical Data Sheetp. 1 - Surface finish
eMarble is a PLA based 3D printing material with cool appearance as marble and the characteristics of easy to print as PLA.
eSUN, eMarble Technical Data Sheetp. 1
eSUN ePLA HSStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C45–60Chamber, °CnoneDrying, °C, h508 h
eSUN ePLA HSeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, ePLA+HS Technical Data Sheet7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 59 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 17.5 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 2695 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 78 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 4.1 kJ/m2p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 54 ℃p. 1: Heat distortion Temperature | GB/T 1634As the sheet prints it: GB/T 1634 0.45Mpa | not in the median: measured on a moulded bar |
| Density | 1.24 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 210 - 230℃; Bed 45-60°CeSUN, ePLA+HS Technical Data Sheetp. 2: Recommended printing settings; p. 2: Based on 0.4 mm nozzle
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Good for
COSPLAY
eSUN, ePLA+HS Technical Data Sheetp. 1 - Benefits
Excellent printability
eSUN, ePLA+HS Technical Data Sheetp. 1 - Benefits
Lines are not easily brittle and broken
eSUN, ePLA+HS Technical Data Sheetp. 1 - Benefits
As a result, we have selectively chosen ePLA+HS, also known as ePLA+HS, which is specifically designed to match high-speed printing and offers enhanced toughness.
eSUN, ePLA+HS Technical Data Sheetp. 1
eSUN ePLA MatteStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg25Nozzle, °C190–230Bed, °C45–60Chamber, °CnoneDrying, °C, h508 h
eSUN ePLA MatteeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, ePLA-Matte Technical Data Sheet7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 34.56 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 56.1 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 1119.41 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 41.21 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 33.15 kJ/㎡p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 51 ℃p. 1: Heat distortion Temperature | GB/T 1634As the sheet prints it: 0.45MPa GB/T 1634 | not in the median: measured on a moulded bar |
| Density | 1.174 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-230℃; Bed 45-60°CeSUN, ePLA-Matte Technical Data Sheetp. 2: Recommended printing settings; p. 1: Description
Price
24.5 CAD/kgthe median of its 2 regular prices in the sample
2 listings
- Shop3D.ca: 24 CAD/kgePLA-Matte - 1kg Spool 1.75mm / 1.75mm / Deep Black (SKU ePLA-Matte175DB1)in its price; seen 30 Sep 2026
- DigitMakers: 25 CAD/kgeSUN ePLA Matte Filament - 1.75mm 1kg / Deep Black (SKU ESUN-FL-MATTE-PLA-1.75-1KG-DP-BLK)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (7)
- Good for
Decoration
eSUN, ePLA-Matte Technical Data Sheetp. 1 - Benefits
Excellent printability
eSUN, ePLA-Matte Technical Data Sheetp. 1 - Benefits
Not easy to break
eSUN, ePLA-Matte Technical Data Sheetp. 1 - Benefits
Cost-effective
eSUN, ePLA-Matte Technical Data Sheetp. 1 - Benefits
Low density, one roll ePLA-Matte filament consumables are 21% more than other matte PLA product print models.
eSUN, ePLA-Matte Technical Data Sheetp. 1 - Surface finish
Matte surface effect
eSUN, ePLA-Matte Technical Data Sheetp. 1 - Supports and removal
Support easy to peel off
eSUN, ePLA-Matte Technical Data Sheetp. 1
eSUN ePLA STStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C45–60Chamber, °CnoneDrying, °C, h508 h
eSUN ePLA STeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, ePLA-ST Technical Data Sheet7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 34.3 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 90 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 1477 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 43 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 63 kJ/m2p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT | 52 ℃p. 1: Heat distortion Temperature | GB/T 1634 | not in the median: measured on a moulded bar |
| Density | 1.25 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 200- 230℃; Bed 45-60°CeSUN, ePLA-ST Technical Data Sheetp. 2: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Good for
The toughness is better than PETG, and it has good printability , suitable for printing mechanical parts with toughness and precision requirements.
eSUN, ePLA-ST Technical Data Sheetp. 1 - Good for
Mechanical engineering • The automobile industry
eSUN, ePLA-ST Technical Data Sheetp. 1 - Benefits
Excellent printability
eSUN, ePLA-ST Technical Data Sheetp. 1 - Benefits
High impact resistance, high elongation at break, high bonding strength and high printing accuracy.
eSUN, ePLA-ST Technical Data Sheetp. 1 - Printing advice
Remote printing needs to reduce the printing speed (≤40mm/s) to prevent potential feeding issue
eSUN, ePLA-ST Technical Data Sheetp. 2
eSUN ePLA-ChameleonStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg40Nozzle, °C190–230Bed, °C45–60Chamber, °CnoneDrying, °C, h508 h
eSUN ePLA-ChameleoneSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, Technical Data Sheet ePLA-Chameleon7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 26.1 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 3.9 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 3303 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 115.6 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 3 kJ/m2p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT | 52 ℃p. 1: Heat distortion Temperature | GB/T 1634 | not in the median: measured on a moulded bar |
| Density | 1.21 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190- 230℃; Bed 45-60°CeSUN, Technical Data Sheet ePLA-Chameleonp. 2: Recommended printing settings: Extruder Temperature, Build Platform Temperature; p. 2: Based on 0.4 mm nozzle
Price
40 CAD/kgits one regular price in the sample
1 listing
- DigitMakers: 40 CAD/kgeSun ePLA Chameleon 1.75mm 1kg / Tech Black (SKU ESUN-CHMELEON-175-1KG-TECHBLK)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (5)
- Good for
Cultural Creativity • Animation Industry
eSUN, Technical Data Sheet ePLA-Chameleonp. 1 - Benefits
Excellent printability
eSUN, Technical Data Sheet ePLA-Chameleonp. 1 - Benefits
Tough and not easily brittle
eSUN, Technical Data Sheet ePLA-Chameleonp. 1 - Surface finish
The ePLA-Chameleon prefers a special technique to give the filament a flowing and colorful effect, enhancing the vibrancy of solid-colored lines.
eSUN, Technical Data Sheet ePLA-Chameleonp. 1 - Printing advice
Reducing overhang angle structure in the model or the speed in printing to keep the cooling.
eSUN, Technical Data Sheet ePLA-Chameleonp. 2
eSUN ePLA-MagicStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg40Nozzle, °C190–220Bed, °C45–60Chamber, °CnoneDrying, °C, h508 h
eSUN ePLA-MagiceSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, Technical Data Sheet ePLA-Magic7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 34.18 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 4.25 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 3459 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 112 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 2.05 kJ/m2p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT | 52.3 ℃p. 1: Heat distortion Temperature | GB/T 1634 | not in the median: measured on a moulded bar |
| Density | 1.21 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190- 220℃; Bed 45-60°CeSUN, Technical Data Sheet ePLA-Magicp. 2: Recommended printing settings: Extruder Temperature, Build Platform Temperature; p. 2: Based on 0.4 mm nozzle
Price
40 CAD/kgits one regular price in the sample
1 listing
- DigitMakers: 40 CAD/kgeSun ePLA Magic Filament 1.75mm 1kg - Various Colors / Dark Twinkling Blue (SKU eSUN-PLA-175-1KG-MAGIC-DRK-TWNKLNG-BLUE)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (4)
- Good for
Cultural Creativity • Animation Industry
eSUN, Technical Data Sheet ePLA-Magicp. 1 - Benefits
Excellent printability
eSUN, Technical Data Sheet ePLA-Magicp. 1 - Benefits
Tough and not easily brittle
eSUN, Technical Data Sheet ePLA-Magicp. 1 - Printing advice
Reducing overhang angle structure in the model or the speed in printing to keep the cooling.
eSUN, Technical Data Sheet ePLA-Magicp. 2
eSUN eStars-PLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–230Bed, °C45–60Chamber, °CnoneDrying, °C, h508 h
eSUN eStars-PLAeSUN
Data sheet shared with eSUN PLA Clear: their values are one table, recorded once.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, Technical Data Sheet eStars-PLA7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 72 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 11.8 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 1915 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 90 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 5.4 kJ/m2p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat distortion Temperature | GB/T 1634As the sheet prints it: GB/T 1634 0.45Mpa | not in the median: measured on a moulded bar |
| Density | 1.2 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
| eSUN, PLA-CLEAR Technical Data Sheet5 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) | 72 MPap. 1: Tensile Strength | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break | 11.8 %p. 1: Elongation at Break | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus | 1915 MPap. 1: Flexural Modulus | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength | 90 MPap. 1: Flexural Strength | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength orientation not stated | 5.4 kJ/m2 kJ/m²p. 1: IZOD Impact Strength | printed specimen (implied by the document), GB/T 1843 | not in the median: notch not stated |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredeSUN PLA Clear's data sheet, shared
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- neededown data sheet
Its print profile, in the documents' words
- Nozzle 210 -230℃; Bed 45-60°CeSUN, Technical Data Sheet eStars-PLAp. 2: Recommended printing settings
Price
Not in the price sample.
Its 3 documents
What the maker says (5)
- Good for
Toys
eSUN, Technical Data Sheet eStars-PLAp. 1 - Benefits
Excellent printability
eSUN, Technical Data Sheet eStars-PLAp. 1 - Surface finish
Gorgeous luminous rainbow appearance effect
eSUN, Technical Data Sheet eStars-PLAp. 1 - Nozzle wear
Luminous PLA is easy to grind nozzle and extruder gear, it is recommended to use steel nozzle or ruby nozzle, hardened steel extruder gear will be perfect , if the nozzle is clogging , replace the throat and nozzle
eSUN, Technical Data Sheet eStars-PLAp. 2 - Printing advice
The longer the irradiation time, the better the luminous effect
eSUN, Technical Data Sheet eStars-PLAp. 2
eSUN PLA ClearStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C45–60Chamber, °CnoneDrying, °C, h508 h
eSUN PLA CleareSUN
Data sheet shared with eSUN eStars-PLA: their values are one table, recorded once.
Published values
No value is on file for this product.
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190 - 230℃; Bed 45-60°CeSUN, PLA-CLEAR Technical Data Sheetp. 2: Extruder Temperature, Build Platform Temperature
Price
Not in the price sample.
Its 2 documents
What the maker says (7)
- Good for
COSPLAY
eSUN, PLA-CLEAR Technical Data Sheetp. 1 - Good for
It can be used for conceptual model, rapid prototyping, and metal parts casting.
eSUN, PLA-CLEAR Technical Data Sheetp. 1 - Benefits
Easy to print
eSUN, PLA-CLEAR Technical Data Sheetp. 1 - Benefits
High speed printing
eSUN, PLA-CLEAR Technical Data Sheetp. 1 - Warping and shrinkage
does not need to close the cavity, low shrinkage rate, no warping, no cracking, and can print large size model
eSUN, PLA-CLEAR Technical Data Sheetp. 1 - Surface finish
Smooth printed surface
eSUN, PLA-CLEAR Technical Data Sheetp. 1 - Odour and emissions
No pungent smell when printing, safe and environmental protection.
eSUN, PLA-CLEAR Technical Data Sheetp. 1
eSUN PLA Matte DualStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C215–230Bed, °C45–60Chamber, °CnoneDrying, °C, h508 h
eSUN PLA Matte DualeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, ePLA-Matte Dual Technical Data Sheet7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 13.58 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 39 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 2786.4 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 56.72 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 3.41 kJ/㎡p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 54 ℃p. 1: Heat distortion Temperature | GB/T 1634As the sheet prints it: 0.45MPa GB/T 1634 | not in the median: measured on a moulded bar |
| Density | 1.174 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
Print settings
- Nozzle
- 215–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 215-230℃; Bed 45-60°CeSUN, ePLA-Matte Dual Technical Data Sheetp. 2: Recommended printing settings; p. 1: Description; p. 2: Based on
Price
Not in the price sample.
Its 2 documents
What the maker says (12)
- Good for
Decoration
eSUN, ePLA-Matte Dual Technical Data Sheetp. 1 - Good for
These characteristics make ePLA-Matte Dual very suitable for the verification of early concept models and the production of rapid prototypes.
eSUN, ePLA-Matte Dual Technical Data Sheetp. 1 - Benefits
Excellent printability
eSUN, ePLA-Matte Dual Technical Data Sheetp. 1 - Benefits
Not easy to break
eSUN, ePLA-Matte Dual Technical Data Sheetp. 1 - Benefits
Cost-effective
eSUN, ePLA-Matte Dual Technical Data Sheetp. 1 - Benefits
Low density
eSUN, ePLA-Matte Dual Technical Data Sheetp. 1 - Benefits
It is easy to remove from the model's surface, has high line strength, and is not prone to brittleness, ensuring the continuity and stability of long printing times and avoiding the trouble of nozzle clogging.
eSUN, ePLA-Matte Dual Technical Data Sheetp. 1 - Warping and shrinkage
It also has a low shrinkage rate, which makes it less likely to warp or crack, making it an ideal choice for printing large-sized models.
eSUN, ePLA-Matte Dual Technical Data Sheetp. 1 - Surface finish
Matte surface effect
eSUN, ePLA-Matte Dual Technical Data Sheetp. 1 - Surface finish
ePLA-Matte Dual is an outstanding ePLA printing material with a matte surface finish.
eSUN, ePLA-Matte Dual Technical Data Sheetp. 1 - Surface finish
The surface is delicate, with no obvious layer lines, easy to use, and does not require sealed printing.
eSUN, ePLA-Matte Dual Technical Data Sheetp. 1 - Supports and removal
Support easy to peel off
eSUN, ePLA-Matte Dual Technical Data Sheetp. 1
eSUN PLA UV Color ChangeStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C45–60Chamber, °CnoneDrying, °C, h508 h
eSUN PLA UV Color ChangeeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, Technical Data Sheet PLA UV Color Change7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 27.58 MPap. 1: Tensile Strength | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 2.88 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 2897.38 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 72.8 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 4.67 kJ/㎡p. 1: IZOD Impact Strength GB/T 1843 | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 50.75 ℃p. 1: Heat distortion Temperature GB/T 1634 | GB/T 1634As the sheet prints it: 0.45MPa GB/T 1634 | not in the median: measured on a moulded bar |
| Density | 1.25 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-230℃; Bed 45-60°CeSUN, Technical Data Sheet PLA UV Color Changep. 2: Recommended printing settings: Extruder Temperature, Build Platform Temperature; p. 2: Based on
Price
Not in the price sample.
Its 2 documents
What the maker says (9)
- Good for
Decoration
eSUN, Technical Data Sheet PLA UV Color Changep. 1 - Benefits
Excellent printability
eSUN, Technical Data Sheet PLA UV Color Changep. 1 - Benefits
Not easy to break
eSUN, Technical Data Sheet PLA UV Color Changep. 1 - Benefits
Cost-effective
eSUN, Technical Data Sheet PLA UV Color Changep. 1 - Benefits
Low density
eSUN, Technical Data Sheet PLA UV Color Changep. 1 - Surface finish
Upon exposure to light, the filament changes color on its own, creating an extraordinary visual effect.
eSUN, Technical Data Sheet PLA UV Color Changep. 1 - Surface finish
The material prints smoothly, resulting in a surface that is smooth and free from layer lines.
eSUN, Technical Data Sheet PLA UV Color Changep. 1 - Supports and removal
Support easy to peel off
eSUN, Technical Data Sheet PLA UV Color Changep. 1 - Supports and removal
The support material is easier to remove from the model surface compared to other materials.
eSUN, Technical Data Sheet PLA UV Color Changep. 1
eSUN PLA-RockStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg25Nozzle, °C210–230Bed, °C45–60Chamber, °CnoneDrying, °C, h508 h
eSUN PLA-RockeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, Technical Data Sheet PLA-Rock7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) | 18.08 MPap. 1: Tensile Strength | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 2.05 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 2705.1 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 55.8 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 4.43 kJ/㎡p. 1: IZOD Impact Strength GB/T 1843 | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 52.3 ℃p. 1: Heat distortion Temperature GB/T 1634 | GB/T 1634As the sheet prints it: 0.45MPa GB/T 1634 | not in the median: measured on a moulded bar |
| Density | 1.25 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 210-230℃; Bed 45-60°CeSUN, Technical Data Sheet PLA-Rockp. 2: Recommended printing settings
Price
25 CAD/kgits one regular price in the sample
1 listing
- DigitMakers: 25 CAD/kgeSUN PLA Rock Filaments 1.75 mm 1kg / Hornfels (SKU ESUN-PLA-ROCK-175-1KG-HRNFLS)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (9)
- Good for
Decoration
eSUN, Technical Data Sheet PLA-Rockp. 1 - Benefits
Excellent printability
eSUN, Technical Data Sheet PLA-Rockp. 1 - Benefits
Not easy to break
eSUN, Technical Data Sheet PLA-Rockp. 1 - Benefits
Cost-effective
eSUN, Technical Data Sheet PLA-Rockp. 1 - Benefits
Low density
eSUN, Technical Data Sheet PLA-Rockp. 1 - Benefits
It has high line strength and is not prone to brittleness, ensuring the continuity and stability of long-term printing, and avoiding the trouble of nozzle clogging.
eSUN, Technical Data Sheet PLA-Rockp. 1 - Surface finish
Matte surface effect
eSUN, Technical Data Sheet PLA-Rockp. 1 - Surface finish
PLA rock uses a matte formula, with a dull and frosted surface texture, inspired by the texture of rocks.
eSUN, Technical Data Sheet PLA-Rockp. 1 - Supports and removal
Support easy to peel off
eSUN, Technical Data Sheet PLA-Rockp. 1
eSUN PLA+CMYKStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg80Nozzle, °C210–230Bed, °C45–60Chamber, °CnoneDrying, °C, h508 h
eSUN PLA+CMYKeSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, PLA+CMYK Technical Data Sheet7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 63 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 20 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 1973 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 74 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 6 kJ/m2p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT | 53 ℃p. 1: Heat distortion Temperature | GB/T 1634 | not in the median: measured on a moulded bar |
| Density | 1.23 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
Print settings
- Nozzle
- 210–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 210- 230℃; Bed 45-60°CeSUN, PLA+CMYK Technical Data Sheetp. 2: Recommended printing settings; p. 2: Based on
Price
80 CAD/kgits one regular price in the sample
1 listing
- DigitMakers: 80 CAD/kgeSUN PLA+ CMYK - 1kg 1.75mm (SKU ESUN-CMYK-SET-1.75MM)in its price; seen 30 Sep 2026
Its 2 documents
What the maker says (4)
- Good for
Prototyping • Decoration
eSUN, PLA+CMYK Technical Data Sheetp. 1 - Benefits
Easy to print
eSUN, PLA+CMYK Technical Data Sheetp. 1 - Benefits
Good toughness
eSUN, PLA+CMYK Technical Data Sheetp. 1 - Surface finish
Smooth printed surface
eSUN, PLA+CMYK Technical Data Sheetp. 1
eSUN PLA+HS SilverStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–230Bed, °C45–60Chamber, °CnoneDrying, °C, h508 h
eSUN PLA+HS SilvereSUN
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, ePLA-HS Technical Data Sheet7 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) orientation not stated | 59 MPap. 1: Tensile Strength GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 15 %p. 1: Elongation at Break GB/T 1040 | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 2700 MPap. 1: Flexural Modulus GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 81 MPap. 1: Flexural Strength GB/T 9341 | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 4.3 kJ/m2p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 53 ℃p. 1: Heat distortion Temperature | GB/T 1634As the sheet prints it: GB/T 1634 0.45Mpa | not in the median: measured on a moulded bar |
| Density | 1.21 g/cm3p. 1: Density GB/T 1033 | specimen not stated, GB/T 1033 | |
Print settings
- Nozzle
- 190–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190-230℃; Bed 45-60°CeSUN, ePLA-HS Technical Data Sheetp. 2: Recommended printing settings; p. 2: Based on 0.4 mm nozzle
Price
Not in the price sample.
Its 2 documents
What the maker says (8)
- Good for
COSPLAY
eSUN, ePLA-HS Technical Data Sheetp. 1 - Good for
It can be used for early conceptual model and rapid prototyping.
eSUN, ePLA-HS Technical Data Sheetp. 1 - Benefits
Easy to print
eSUN, ePLA-HS Technical Data Sheetp. 1 - Benefits
Through the balance adjustment of the melt index and flow temperature, the ePLA-HS can flow smoothly in the molten state, and can be cooled faster during printing and molding.
eSUN, ePLA-HS Technical Data Sheetp. 1 - Benefits
With this method, the smooth flowing without plug and fast cooling without deformation can be obtained during high-speed printing
eSUN, ePLA-HS Technical Data Sheetp. 1 - Benefits
Through the optimization of materials, the dependence of fast printing on the cooling power of the printer is reduced, and the printability is excellent
eSUN, ePLA-HS Technical Data Sheetp. 1 - Surface finish
Smooth printed surface
eSUN, ePLA-HS Technical Data Sheetp. 1 - Surface finish
Compared with ordinary materials, the printing speed is faster, the surface quality is higher, and the detail performance is better
eSUN, ePLA-HS Technical Data Sheetp. 1
Extrudr BIOFUSIONStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C20–60Chamber, °CnoneDrying, °C, h508 h
Extrudr BIOFUSIONExtrudr
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Extrudr, TECHNICAL DATA SHEET BIOFUSION9 values | |||
| Tensile modulus orientation not stated | 3200 MPap. 1: Tensile modulus (E-Modulus) ASTM D882 MPa | ASTM D882 | not in the median: measured on film |
| Tensile strength (yield or break not stated) orientation not stated | 55 MPap. 1: Tensile strength ASTM D882 MPa | ASTM D882 | not in the median: measured on film |
| Flexural modulus | 2200 MPap. 1: E-Modulus ISO 178 MPa | ISO 178 | not in the median: measured on a moulded bar |
| Izod impact strength | 12 J/mp. 1: Impact resistance ASTM D256 kj/m² | ASTM D256notched | not in the median: in J/m |
| Vicat softening temperature | 75 °Cp. 1: VICAT A (VST) ASTM D1525 °C | ASTM D1525 | |
| Melting temperature | 200-210 °Cp. 1: Melting temperature ISO 3146-C °C | ISO 3146As the sheet prints it: ISO 3146-C | |
| Density | 1.25 g/cm³p. 1: Density ASTM D792 g/cm³ | ASTM D792 | |
| Melt mass-flow rate | 7 g/10minp. 1: MFR ASTM D1238 g/10min | ASTM D1238 | |
| Mould shrinkage orientation not stated | 0.3 %p. 1: Shrinking | ASTM D955 | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 20–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 200-230°C; Bed 20-60°CExtrudr, TECHNICAL DATA SHEET BIOFUSIONp. 1: Recommended printing settings; p. 1: Hardened Nozzle
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Benefits
The filament is very easy to process, which means that extraordinary results can be achieved even with little experience.
Extrudr, TECHNICAL DATA SHEET BIOFUSIONp. 1 - Warping and shrinkage
Low warping
Extrudr, TECHNICAL DATA SHEET BIOFUSIONp. 1 - Warping and shrinkage
Shrinking ASTM D955 % 0.3
Extrudr, TECHNICAL DATA SHEET BIOFUSIONp. 1 - Surface finish
The printed parts have an intense, metallic gloss.
Extrudr, TECHNICAL DATA SHEET BIOFUSIONp. 1 - Nozzle wear
Hardened Nozzle no
Extrudr, TECHNICAL DATA SHEET BIOFUSIONp. 1
Extrudr PEARLStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C140–210Bed, °C20–60Chamber, °CnoneDrying, °C, h508 h
Extrudr PEARLExtrudr
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Extrudr, TECHNICAL DATA SHEET PEARL10 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) | 34 MPap. 1: Tensile strength ISO 527 MPa | ISO 527 | not in the median: measured on a moulded bar |
| Elongation at break | 6.9 %p. 1: Elongation at break ISO 527 % | ISO 527 | not in the median: measured on a moulded bar |
| Flexural modulus | 2500 MPap. 1: Flexural modulus ISO 527 MPa | ISO 527 | not in the median: measured on a moulded bar |
| Flexural modulus | 1800 MPap. 1: E-Modulus ISO 178 MPa | ISO 178 | not in the median: measured on a moulded bar |
| Flexural strength | 30.1 MPap. 1: Flexural strength ISO 527 MPa | ISO 527 | not in the median: measured on a moulded bar |
| HDT at 0.45 MPa | 51 °Cp. 1: HDT/B ISO 75 °C | ISO 75As the sheet prints it: HDT B ISO 75 | not in the median: measured on a moulded bar |
| Vicat softening temperature | 58 °Cp. 1: VICAT A (VST) ISO 306 °C | ISO 306 | |
| Density | 1.25 g/cm³p. 1: Density ISO 2781 g/cm³ | specimen not stated, ISO 2781 | |
| Melt mass-flow rate | 4 g/10minp. 1: MFR ISO 1133 g/10min | specimen not stated, ISO 1133 | |
| Mould shrinkage orientation not stated | 0.67 %p. 1: Shrinking | specimen not stated, ISO 294As the sheet prints it: ISO 294-4 | |
Print settings
- Nozzle
- 140–210 °Cown data sheet
- Bed
- 20–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 140-210°C; Bed 20-60°CExtrudr, TECHNICAL DATA SHEET PEARLp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Recommended settings for printers with a 0.4mm Nozzle
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Benefits
Biodegradable (DIN EN ISO 14855)
Extrudr, TECHNICAL DATA SHEET PEARLp. 1 - Warping and shrinkage
Low warping
Extrudr, TECHNICAL DATA SHEET PEARLp. 1 - Warping and shrinkage
Shrinking ISO 294-4 % 0.67
Extrudr, TECHNICAL DATA SHEET PEARLp. 1 - Surface finish
PEARL comes from our BIO design range and impresses with its uniquely supple surface.
Extrudr, TECHNICAL DATA SHEET PEARLp. 1 - Nozzle wear
Hardened Nozzle no
Extrudr, TECHNICAL DATA SHEET PEARLp. 1
iSANMATE PLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C190–220Bed, °C0–50Chamber, °C0–40Drying, °C, h508 h
iSANMATE PLAiSANMATE
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| iSANMATE, PLA7 valuesUnless a row says otherwise: Film specimen (ASTM D882); not a printed or moulded bar | |||
| Tensile modulus orientation not stated | 3309 MPap. 1: Tensile Modulus MD | ASTM D882 | not in the median: measured on film |
| Tensile modulus | 3861 MPap. 1: Tensile Modulus TD | ASTM D882As the sheet prints it: ASTM D882, transverse direction | not in the median: measured on film |
| Tensile strength (yield or break not stated) orientation not stated | 110,3 MPatranscription correctedp. 1: Tensile Strength MD | ASTM D882As the sheet prints it: ASTM D882, machine direction | not in the median: measured on film |
| Tensile strength (yield or break not stated) | 144,7 MPap. 1: Tensile Strength TD | ASTM D882As the sheet prints it: ASTM D882, transverse direction | not in the median: measured on film |
| Elongation at break along the melt flow | 160 %p. 1: Elongation atBreak MD | ASTM D882 | not in the median: measured on film |
| Elongation at break | 100%p. 1: Elongation at Break TD | ASTM D882As the sheet prints it: ASTM D882, transverse direction | not in the median: measured on film |
| Density | 1.24 g/Cm3p. 1: Density | specimen not stated, ASTM D1505 | |
Print settings
- Nozzle
- 190–220 °Cown data sheet
- Bed
- 0–50 °Cown data sheet
- Heated chamber
- 0–40 °Cown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 190 -220 ºC; Bed 0-50 ºC; Chamber 0-40 °CiSANMATE, PLARecommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (2)
- Good for
PLA is widely used in education, home, machinery, electronic appliances, instrumentation, and other fields
iSANMATE, PLAp. 1 - Warping and shrinkage
PLA can print large models without a heating platform and warping will not happen easily. iT has a low shrinkage rate and performs well even when printing large- size models.
iSANMATE, PLAp. 1
Protopasta Brass Fill, Bronze Fill, Copper Fill HTPLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C195Bed, °C60Chamber, °C—Drying, °C, h—
Protopasta Brass Fill, Bronze Fill, Copper Fill HTPLAProtopasta
Modified: undisclosed dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Protopasta, Technical Data Sheet Rev .1 Brass Fill, Bronze Fill, Copper Fill HTPLA1 value | |||
| Density | 2.3 g/ccp. 1: Density approx. | no standard stated | |
Print settings
- Nozzle
- 195 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle [°C] 195; Bed [°C] 60Protopasta, Technical Data Sheet Rev .1 Brass Fill, Bronze Fill, Copper Fill HTPLAp. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Benefits
HTPLA is a semi-crystalline grade of PLA optimized for heat-treating for higher temperature use.
Protopasta, Technical Data Sheet Rev .1 Brass Fill, Bronze Fill, Copper Fill HTPLAp. 1 - Warping and shrinkage
Prior to printing, HTPLA parts should be scaled in the slicer to compensate for shrinkage when heat treating.
Protopasta, Technical Data Sheet Rev .1 Brass Fill, Bronze Fill, Copper Fill HTPLAp. 1 - Warping and shrinkage
Scale Values (x/y-axis) 101.5% Scale Values (z-axis) 99%
Protopasta, Technical Data Sheet Rev .1 Brass Fill, Bronze Fill, Copper Fill HTPLAp. 1 - Surface finish
Brass, Bronze, and Copper HTPLA print like plastic but finish like real metal for beautiful, durable parts from most standard 3D printers.
Protopasta, Technical Data Sheet Rev .1 Brass Fill, Bronze Fill, Copper Fill HTPLAp. 1 - Odour and emissions
Characteristics low odor, non-toxic, renewably sourced
Protopasta, Technical Data Sheet Rev .1 Brass Fill, Bronze Fill, Copper Fill HTPLAp. 1
Protopasta Magnetic Iron PLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C192Bed, °C60Chamber, °C—Drying, °C, h—
Protopasta Magnetic Iron PLAProtopasta
Modified: undisclosed dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Protopasta, Technical Data Sheet Rev. 1 Magnetic Iron PLA1 value | |||
| Density | 1.85 g/ccp. 1: Density approx. | no standard stated | |
Print settings
- Nozzle
- 192 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle [°C] 192; Bed [°C] 60Protopasta, Technical Data Sheet Rev. 1 Magnetic Iron PLAp. 1: Recommended printing settings; p. 1: Description
Price
Not in the price sample.
Its 2 documents
What the maker says (7)
- Benefits
Proto-pasta Rustable Magnetic Iron Metal PLA Composite is actually ferromagnetic.
Protopasta, Technical Data Sheet Rev. 1 Magnetic Iron PLAp. 1 - Benefits
Attracts magnets (neodymium type recommended for strongest attraction)
Protopasta, Technical Data Sheet Rev. 1 Magnetic Iron PLAp. 1 - Pitfalls and limitations
Magnetic Iron PLA is slightly more brittle than standard PLA and requires extra care when handling.
Protopasta, Technical Data Sheet Rev. 1 Magnetic Iron PLAp. 1 - Surface finish
Encapsulated in plastic, the iron maintains a stable matte, cast metal finish as printed, but can be rusted when desired.
Protopasta, Technical Data Sheet Rev. 1 Magnetic Iron PLAp. 1 - Nozzle wear
(try a wear-resistant and/or larger diameter nozzle for increased service intervals)
Protopasta, Technical Data Sheet Rev. 1 Magnetic Iron PLAp. 1 - Nozzle wear
Magnetic Iron filament is more abrasive than standard PLA and may require nozzle replacements and 1st layer adjustments.
Protopasta, Technical Data Sheet Rev. 1 Magnetic Iron PLAp. 1 - Odour and emissions
Characteristics low odor, non-toxic, renewably sourced
Protopasta, Technical Data Sheet Rev. 1 Magnetic Iron PLAp. 1
Protopasta Opaque HTPLA (v3)Strength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210Bed, °C60Chamber, °CnoneDrying, °C, h508 h
Protopasta Opaque HTPLA (v3)Protopasta
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Protopasta, Technical Data Sheet Rev 1. Opaque HTPLA (v3)1 value | |||
| Density | 1.2 g/ccp. 1: Density approx. | no standard stated | |
Print settings
- Nozzle
- 210 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle [°C] 210; Bed [°C] 60Protopasta, Technical Data Sheet Rev 1. Opaque HTPLA (v3)p. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Benefits
HTPLA is a semi-crystalline grade of PLA optimized for heat-treating for higher temperature use.
Protopasta, Technical Data Sheet Rev 1. Opaque HTPLA (v3)p. 1 - Pitfalls and limitations
PLA and HTPLA as printed, though both adequate performers in an office environment, have poor temperature stability, loosing significant stiffness at temperatures not much above 50C.
Protopasta, Technical Data Sheet Rev 1. Opaque HTPLA (v3)p. 1 - Warping and shrinkage
Prior to printing, HTPLA parts should be scaled in the slicer to compensate for shrinkage when heat treating.
Protopasta, Technical Data Sheet Rev 1. Opaque HTPLA (v3)p. 1 - Warping and shrinkage
Scale Values (x/y-axis) 101.8% Scale Values (z-axis) 99%
Protopasta, Technical Data Sheet Rev 1. Opaque HTPLA (v3)p. 1 - Odour and emissions
Characteristics low odor, non-toxic, renewably sourced
Protopasta, Technical Data Sheet Rev 1. Opaque HTPLA (v3)p. 1
Protopasta Quantum Dots (HTPLA)Strength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C220–240Bed, °C55–65Chamber, °CnoneDrying, °C, hnone
Protopasta Quantum Dots (HTPLA)Protopasta
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Protopasta, Technical Data Sheet Rev. 1 Quantum Dots (HTPLA)1 value | |||
| Density | 1.24 g/ccp. 1: Density approx. | no standard stated | |
Print settings
- Nozzle
- 220–240 °Cown data sheet
- Bed
- 55–65 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- not neededown data sheet
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 220-240C; Bed 55-65C; Drying We do not recommend drying our PLA-based materialsProtopasta, Technical Data Sheet Rev. 1 Quantum Dots (HTPLA)p. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (3)
- Moisture sensitivity
We do not recommend drying our PLA-based materials.
Protopasta, Technical Data Sheet Rev. 1 Quantum Dots (HTPLA)p. 1 - Moisture sensitivity
If you notice evidence of moisture (surface defects, popping sounds, underextrusion, etc), these can be addressed in the settings by increasing the speed and/or decreasing the temperature.
Protopasta, Technical Data Sheet Rev. 1 Quantum Dots (HTPLA)p. 1 - Odour and emissions
Characteristics Low odor, non-toxic, renewably sourced
Protopasta, Technical Data Sheet Rev. 1 Quantum Dots (HTPLA)p. 1
Protopasta Stainless Steel PLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C198Bed, °C60Chamber, °C—Drying, °C, h—
Protopasta Stainless Steel PLAProtopasta
Modified: undisclosed dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Protopasta, Technical Data Sheet Rev. 1 Stainless Steel PLA1 value | |||
| Density | 2.3 g/ccp. 1: Density approx. | no standard stated | |
Print settings
- Nozzle
- 198 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not stated
- Drying
- not stated
- Hardened nozzle
- not stated
Its print profile, in the documents' words
- Nozzle [°C] 198; Bed [°C] 60Protopasta, Technical Data Sheet Rev. 1 Stainless Steel PLAp. 1: Recommended printing settings; p. 1: Description
Price
Not in the price sample.
Its 2 documents
What the maker says (9)
- Benefits
Stainless Steel PLA is a dense material that prints as easily as standard PLA.
Protopasta, Technical Data Sheet Rev. 1 Stainless Steel PLAp. 1 - Pitfalls and limitations
The process may be less consistent on smaller nozzles (<. 4mm) and/or Bowden Type machines
Protopasta, Technical Data Sheet Rev. 1 Stainless Steel PLAp. 1 - Pitfalls and limitations
In filament form, Stainless Steel PLA is slightly more brittle than standard PLA and requires extra care when handling.
Protopasta, Technical Data Sheet Rev. 1 Stainless Steel PLAp. 1 - Surface finish
This stainless steel filled PLA can be Polished to look like Polished metal!
Protopasta, Technical Data Sheet Rev. 1 Stainless Steel PLAp. 1 - Surface finish
Material is matte Gray with a cast metal look before post-processing
Protopasta, Technical Data Sheet Rev. 1 Stainless Steel PLAp. 1 - Nozzle wear
Try a wear-resistant and/or larger diameter nozzle for increased service intervals.
Protopasta, Technical Data Sheet Rev. 1 Stainless Steel PLAp. 1 - Nozzle wear
Stainless Steel filament is more abrasive than standard PLA and may require nozzle replacements and 1st layer adjustments.
Protopasta, Technical Data Sheet Rev. 1 Stainless Steel PLAp. 1 - Odour and emissions
Characteristics low odor, non-toxic, renewably sourced
Protopasta, Technical Data Sheet Rev. 1 Stainless Steel PLAp. 1 - Printing advice
No heated bed required.
Protopasta, Technical Data Sheet Rev. 1 Stainless Steel PLAp. 1
Protopasta Translucent / Sparkly (HTPLA)Strength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C206Bed, °C60Chamber, °CnoneDrying, °C, h508 h
Protopasta Translucent / Sparkly (HTPLA)Protopasta
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Protopasta, Technical Data Sheet Rev. 1 Translucent / Sparkly (HTPLA)1 value | |||
| Density | 1.24 g/ccp. 1: Density approx. | no standard stated | |
Print settings
- Nozzle
- 206 °Cown data sheet
- Bed
- 60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle [°C] 206; Bed [°C] 60Protopasta, Technical Data Sheet Rev. 1 Translucent / Sparkly (HTPLA)p. 1: Recommended printing settings
Price
Not in the price sample.
Its 2 documents
What the maker says (6)
- Benefits
HTPLA is a semi-crystalline grade of PLA optimized for heat-treating for higher temperature use.
Protopasta, Technical Data Sheet Rev. 1 Translucent / Sparkly (HTPLA)p. 1 - Benefits
All materials in these categories print similar to standard PLA but can be heat treated for higher temperature resistance.
Protopasta, Technical Data Sheet Rev. 1 Translucent / Sparkly (HTPLA)p. 1 - Benefits
This means HTPLA parts maintain strength and form too much higher temperatures than PLA, ABS, or Polyesters like PET which loose structure as soon as 55C and by 100C.
Protopasta, Technical Data Sheet Rev. 1 Translucent / Sparkly (HTPLA)p. 1 - Warping and shrinkage
Prior to printing, HTPLA parts should be scaled in the slicer to compensate for shrinkage when heat treating.
Protopasta, Technical Data Sheet Rev. 1 Translucent / Sparkly (HTPLA)p. 1 - Warping and shrinkage
Scale Values (x/y-axis) 102.2% Scale Values (z-axis) 99%
Protopasta, Technical Data Sheet Rev. 1 Translucent / Sparkly (HTPLA)p. 1 - Odour and emissions
Characteristics low odor, non-toxic, renewably sourced
Protopasta, Technical Data Sheet Rev. 1 Translucent / Sparkly (HTPLA)p. 1
AzureFilm PLAStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C50–60Chamber, °CnoneDrying, °C, h508 h
AzureFilm PLAAzureFilm
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
AzureFilm, Technical Data Sheet PLA TDS8 valuesUnless a row says otherwise: Printed specimen at partial infillprint settings3D printer: Creality Ender 3; Nozzle temperature: 200 °C; Infill: 20 %; Slicer: Cura; Bed temperature: 55 °C; Shells: 2; Nozzle: 0,4 mm; Print speed: 50 mm/s; Layer height: 0,2 mm | |||
| Tensile modulus orientation not stated | 3,3 GPap. 1: Tensile modulus | no standard stated | not in the median: printed below 100 % infill |
| Tensile strength (yield or break not stated) orientation not stated | 59,0 MPap. 1: Tensile strength | no standard stated | not in the median: printed below 100 % infill |
| Elongation at break orientation not stated | 4,2 %p. 1: Strain at break (Tensile) | no standard stated | not in the median: printed below 100 % infill |
| Tensile strain at strength orientation not stated | 3,8 %p. 1: Strain at tensile strength [%] | no standard namedAs the sheet prints it: rate=50 mm/min | listed under other properties |
| Flexural modulus orientation not stated | 2,8 GPap. 1: Flexural modulus | no standard stated | not in the median: printed below 100 % infill |
| Flexural strength orientation not stated | 73,6 MPap. 1: Flexural strength | no standard stated | not in the median: printed below 100 % infill |
| Flexural elongation at break orientation not stated | 3,3 %p. 1: Strain at break (Flexural) | no standard stated | listed under other properties |
| Charpy impact strength orientation not stated | 10,4 kJ/m²p. 1: Charpy unnotched [kJ/m²] | no standard statedtested at 23 °C | not in the median: printed below 100 % infill |
| AzureFilm, Technical Data Sheet PLA TDS1 value | |||
| Tensile modulus orientation not stated | 3,3 MPaphysically implausiblep. 1: Tensile modulus [MPa] | no standard namedAs the sheet prints it: rate=1 mm/minprint settings3D printer: AzureFilm; Nozzle temperature: 200 °C; Infill: 20 %; Slicer: Cura; Bed temperature: 55 °C; Shells: 2; Nozzle: 0,4 mm; Print speed: 50 mm/s; Layer height: 0,3 mm | not in the median: physically implausible as published |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 50–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its 2 print profiles, in the documents' words
- Nozzle 200 – 230°C; Bed Not required (recommended 50-60 °C)AzureFilm, Technical Data Sheet PLA TDSp. 1: Recommended printing settings: Nozzle temperature, Heated bed; p. 1: Build platform
- Nozzle 200 – 230°C; Bed Not required (recommended 50-60 °C)AzureFilm, Technical Data Sheet PLA TDSp. 1: Nozzle temperature; p. 1: Heated bed; p. 1: Build platform
Price
Not in the price sample.
Its 3 documents
What the maker says (1)
- Benefits
This filament is suitable for parts that require high strenght and stiffness and easy processability (no warping, no irritating smell).
AzureFilm, Technical Data Sheet PLA TDSp. 1
eSUN eTwinklingStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C45–60Chamber, °CnoneDrying, °C, h508 h
eSUN eTwinklingeSUN
Modified: cosmetic dense filler. Its values are kept out of the material's medians.
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| eSUN, eTwinkling Technical Data Sheet6 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile strength (yield or break not stated) | 58 MPap. 1: Tensile Strength | GB/T 1040 | not in the median: measured on a moulded bar |
| Flexural modulus | 2100 MPap. 1: Flexural Modulus | GB/T 9341 | not in the median: measured on a moulded bar |
| Flexural strength | 70 MPap. 1: Flexural Strength | GB/T 9341 | not in the median: measured on a moulded bar |
| Izod impact strength | 4 kJ/m²p. 1: IZOD Impact Strength | GB/T 1843 | not in the median: measured on a moulded bar |
| HDT | 67 ℃p. 1: Heat distortion Temperature | GB/T 1634 | not in the median: measured on a moulded bar |
| Density | 1.41 g/cm³p. 1: Density | GB/T 1033 | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 45–60 °Cown data sheet
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 200- 230℃; Bed 45-60°CeSUN, eTwinkling Technical Data Sheetp. 2: Extruder Temperature, Build Platform Temperature
Price
Not in the price sample.
Its 2 documents
What the maker says (4)
- Good for
Toys
eSUN, eTwinkling Technical Data Sheetp. 1 - Benefits
This material is based on PLA material which bring it not only with characteristic of easy to print as PLA but also with special glittering color.
eSUN, eTwinkling Technical Data Sheetp. 1 - Pitfalls and limitations
The material is not easy to bend as the strong rigidity.
eSUN, eTwinkling Technical Data Sheetp. 2 - Printing advice
Try to avoid any bending in feeding.
eSUN, eTwinkling Technical Data Sheetp. 2
Extrudr PLA BASICStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C20–60Chamber, °CnoneDrying, °C, h508 h
Extrudr PLA BASICExtrudr
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Extrudr, TECHNICAL DATA SHEET PLA BASIC9 valuesThe same values also in Extrudr, TECHNICAL DATA SHEET PLA BASIC.Unless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus | 500 MPaphysically implausiblep. 1: Tensile modulus (E-Modulus) ASTM D882 MPa | ASTM D882 | not in the median: physically implausible as published |
| Tensile strength (yield or break not stated) | 53 MPaphysically implausiblep. 1: Tensile strength ASTM D882 MPa | ASTM D882 | not in the median: physically implausible as published |
| Tensile break strength | 60 MPaphysically implausiblep. 1: Stress at break ASTM D882 MPa | ASTM D882 | not in the median: physically implausible as published |
| Elongation at break | 6 %p. 1: Nominal elongation at break ASTM D882 % | ASTM D882 | not in the median: measured on a moulded bar |
| Izod impact strength | 0,3 kj/m²p. 1: Notched impact strength ASTM D256 kj/m²also in Extrudr, TECHNICAL DATA SHEET PLA BASIC | ASTM D256 | not in the median: measured on a moulded bar |
| HDT | 55 °Cp. 1: HDT ASTM E2092 °Calso in Extrudr, TECHNICAL DATA SHEET PLA BASIC | ASTM E2092As the sheet prints it: E2092 | not in the median: measured on a moulded bar |
| Melting temperature | 180-200 °Cp. 1: Melting temperature ISO 3146-C °Calso in Extrudr, TECHNICAL DATA SHEET PLA BASIC | ISO 3146As the sheet prints it: ISO 3146-C | |
| Density | 1,24 g/cm³p. 1: Density ASTM D792 g/cm³ | ASTM D792 | |
| Melt mass-flow rate | 6 g/10minp. 1: MFR ASTM D1238 g/10minalso in Extrudr, TECHNICAL DATA SHEET PLA BASIC | ASTM D1238 | |
| Extrudr, TECHNICAL DATA SHEET PLA BASIC5 valuesUnless a row says otherwise: Film specimen (ASTM D882); not a printed or moulded bar | |||
| Tensile modulus orientation not stated | 500 MPaphysically implausiblep. 1: Tensile modulus (E-Modulus) ASTM D882 MPa | ASTM D882 | not in the median: physically implausible as published |
| Tensile strength (yield or break not stated) orientation not stated | 53 MPaphysically implausiblep. 1: Tensile strength ASTM D882 MPa | ASTM D882 | not in the median: physically implausible as published |
| Tensile break strength orientation not stated | 60 MPaphysically implausiblep. 1: Stress at break ASTM D882 MPa | ASTM D882 | not in the median: physically implausible as published |
| Elongation at break orientation not stated | 6 %p. 1: Nominal elongation at break ASTM D882 % | ASTM D882 | not in the median: measured on film |
| Mould shrinkage orientation not stated | 0,4 %p. 1: Shrinking | specimen not stated, ASTM D955 | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 20–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its 2 print profiles, in the documents' words
- Nozzle 200-230°C; Bed 20-60°CExtrudr, TECHNICAL DATA SHEET PLA BASICp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Recommended settings for printers with a 0.4mm Nozzle
- Nozzle 200-230°C; Bed 20-60°CExtrudr, TECHNICAL DATA SHEET PLA BASICp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Recommended settings for printers with a 0.4mm Nozzle
Price
Not in the price sample.
Its 3 documents
What the maker says (7)
- Good for
It is ideal for a wide range of applications, including prototyping, architecture, modelling and DIY projects.
Extrudr, TECHNICAL DATA SHEET PLA BASICp. 1 - Benefits
Due to its low melting temperature, PLA Basic is very easy to print and enables the production of impressive end products with a glossy surface.
Extrudr, TECHNICAL DATA SHEET PLA BASICp. 1 - Benefits
High-speed printing up to 350 mm/s is possible with the material.
Extrudr, TECHNICAL DATA SHEET PLA BASICp. 1 - Benefits
Easy to process
Extrudr, TECHNICAL DATA SHEET PLA BASICp. 1 - Benefits
Biodegradable (EN 13432)
Extrudr, TECHNICAL DATA SHEET PLA BASICp. 1 - Warping and shrinkage
Shrinking ASTM D955 % 0,4
Extrudr, TECHNICAL DATA SHEET PLA BASICp. 1 - Nozzle wear
Hardened Nozzle no
Extrudr, TECHNICAL DATA SHEET PLA BASICp. 1
Extrudr PLA NX2 MATTStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C200–230Bed, °C20–60Chamber, °CnoneDrying, °C, h508 h
Extrudr PLA NX2 MATTExtrudr
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Extrudr, TECHNICAL DATA SHEET PLA NX2 MATT12 valuesThe same values also in Extrudr, TECHNICAL DATA SHEET PLA NX2 and Extrudr, SCHEDA TECNICA PLA NX2 MATT.Unless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus | 2600 MPap. 1: Tensile modulus (E-Modulus) ISO 527 MPaalso in Extrudr, TECHNICAL DATA SHEET PLA NX2 | ISO 527 | not in the median: measured on a moulded bar |
| Tensile strength (yield or break not stated) | 47 MPap. 1: Tensile strength ISO 527 MPaalso in Extrudr, TECHNICAL DATA SHEET PLA NX2 | ISO 527 | not in the median: measured on a moulded bar |
| Tensile break strength | 23 MPap. 1: Stress at break ISO 527 MPaalso in Extrudr, TECHNICAL DATA SHEET PLA NX2 | ISO 527 | not in the median: measured on a moulded bar |
| Elongation at break | 19 %p. 1: Nominal elongation at break ISO 527-2 %also in Extrudr, TECHNICAL DATA SHEET PLA NX2 | ISO 527As the sheet prints it: ISO 527-2 | not in the median: measured on a moulded bar |
| Tensile strain at strength | 4 %p. 1: Elongation at strength ISO 527 %also in Extrudr, TECHNICAL DATA SHEET PLA NX2 | ISO 527 | listed under other properties |
| Flexural modulus | 2650 MPap. 1: Flexural modulus (E-Modulus)ISO 178 MPaalso in Extrudr, TECHNICAL DATA SHEET PLA NX2 | ISO 178 | not in the median: measured on a moulded bar |
| Charpy impact strength | 7 kj/m²p. 1: Notched impact strength ISO 179/1eA kj/m²also in Extrudr, TECHNICAL DATA SHEET PLA NX2 | ISO 179As the sheet prints it: ISO 179/1eA | not in the median: measured on a moulded bar |
| Vicat softening temperature | 60 °Cp. 1: VICAT A (VST) ISO 306 °Calso in Extrudr, TECHNICAL DATA SHEET PLA NX2 | ISO 306 | |
| Melting temperature | 180-200 °Cp. 1: Melting temperature ISO 3146-C °Calso in Extrudr, TECHNICAL DATA SHEET PLA NX2 | ISO 3146As the sheet prints it: ISO 3146-C | |
| Density | 1.3 g/cm³p. 1: Density ISO 1183 g/cm³ | ISO 1183 | |
| Melt mass-flow rate | 5 g/10minp. 1: MFR ISO 1133 g/10minalso in Extrudr, SCHEDA TECNICA PLA NX2 MATTalso in Extrudr, TECHNICAL DATA SHEET PLA NX2 | ISO 1133 | |
| Mould shrinkage orientation not stated | 0.3 %p. 1: Shrinking | specimen not stated, ISO 294As the sheet prints it: ISO 294-4 | |
Print settings
- Nozzle
- 200–230 °Cown data sheet
- Bed
- 20–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its 3 print profiles, in the documents' words
- Nozzle 200-230°C; Bed 20-60°CExtrudr, TECHNICAL DATA SHEET PLA NX2 MATTp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Recommended settings for printers with a 0.4mm Nozzle
- Nozzle 200-230°C; Bed 20-60°CExtrudr, TECHNICAL DATA SHEET PLA NX2p. 1: Recommended printing settings; p. 1: Hardened Nozzle
- Nozzle 200-230°C; Bed 20-60°CExtrudr, SCHEDA TECNICA PLA NX2 MATTp. 1: Ugello; p. 1: Piano riscaldato; p. 1: Spazio chiuso; p. 1: Impostazioni consigliate per stampanti con ugello da 0,4 mm
Price
Not in the price sample.
Its 4 documents
What the maker says (12)
- Good for
It is also suitable for mechanically stressed parts due to its impact resistance and higher flexibility.
Extrudr, TECHNICAL DATA SHEET PLA NX2p. 1 - Benefits
PLA NX2 MATT & TOUGH is a new generation of PLA with improved mechanical properties compared to normal PLA.
Extrudr, TECHNICAL DATA SHEET PLA NX2p. 1 - Warping and shrinkage
Shrinking ISO 294-4 % 0.3
Extrudr, TECHNICAL DATA SHEET PLA NX2p. 1 - Precision and tolerance
The optimised interface offers detailed print quality.
Extrudr, TECHNICAL DATA SHEET PLA NX2p. 1 - Surface finish
Matte surface
Extrudr, TECHNICAL DATA SHEET PLA NX2p. 1 - Nozzle wear
Hardened Nozzle no
Extrudr, TECHNICAL DATA SHEET PLA NX2p. 1 - Good for
It is also suitable for mechanically stressed parts due to its impact resistance and higher flexibility.
Extrudr, TECHNICAL DATA SHEET PLA NX2 MATTp. 1 - Benefits
PLA NX2 MATT & TOUGH is a new generation of PLA with improved mechanical properties compared to normal PLA.
Extrudr, TECHNICAL DATA SHEET PLA NX2 MATTp. 1 - Warping and shrinkage
Shrinking ISO 294-4 % 0.3
Extrudr, TECHNICAL DATA SHEET PLA NX2 MATTp. 1 - Precision and tolerance
The optimised interface offers detailed print quality.
Extrudr, TECHNICAL DATA SHEET PLA NX2 MATTp. 1 - Surface finish
Matte surface
Extrudr, TECHNICAL DATA SHEET PLA NX2 MATTp. 1 - Nozzle wear
Hardened Nozzle no
Extrudr, TECHNICAL DATA SHEET PLA NX2 MATTp. 1
Chemicals and environment (2)
- UV and outdoor: described in words
Improved UV resistance
UVExtrudr, TECHNICAL DATA SHEET PLA NX2p. 1 - UV and outdoor: described in words
Improved UV resistance
UVExtrudr, TECHNICAL DATA SHEET PLA NX2 MATTp. 1
Extrudr PLA TOUGHStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C210–250Bed, °C35–60Chamber, °CnoneDrying, °C, h508 h
Extrudr PLA TOUGHExtrudr
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| Extrudr, TECHNICAL DATA SHEET PLA TOUGH11 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus | 3200 MPap. 1: Tensile modulus (Young‘s modulus) ISO 527-2 MPa | ISO 527As the sheet prints it: ISO 527-2 | not in the median: measured on a moulded bar |
| Tensile yield strength | 56,9 MPap. 1: Tensile strength at yield ISO 527-2 MPa | ISO 527As the sheet prints it: ISO 527-2 | not in the median: measured on a moulded bar |
| Elongation at break | 14 %p. 1: Elongation at break ISO 527-2 % | ISO 527As the sheet prints it: ISO 527-2 | not in the median: measured on a moulded bar |
| Flexural modulus | 3340 MPap. 1: Flexural modulus ISO 178 MPa | ISO 178 | not in the median: measured on a moulded bar |
| Flexural strength | 89,8 MPap. 1: Flexural strength ISO 178 MPa | ISO 178 | not in the median: measured on a moulded bar |
| Vicat softening temperature | 65 °Cp. 1: Vicat softening temp. ISO 306 A50 °C | ISO 306As the sheet prints it: ISO 306 A50 | |
| Vicat softening temperature | 150 °Cp. 1: Vicat softening temp. (*sintered) ISO 306 A50 °C | ISO 306As the sheet prints it: ISO 306 A50post-processingsintered | |
| Melting temperature | 180 °Cp. 1: Melting point (Tm) ISO 3146-C °C | ISO 3146As the sheet prints it: ISO 3146-C | |
| Density | 1.2 g/cm³p. 1: Density ISO 1183 g/cm³ | ISO 1183 | |
| Melt mass-flow rate | 21 ± 3 g/10minp. 1: Melt flow rate (MFR) ISO 1133-1 g/10min | ISO 1133As the sheet prints it: MFR g/10min ISO 1133-1 | |
| Mould shrinkage orientation not stated | 0.3 %p. 1: Mould shrinkage | specimen not stated, ISO 294As the sheet prints it: ISO 294-4 | |
Print settings
- Nozzle
- 210–250 °Cown data sheet
- Bed
- 35–60 °Cown data sheet
- Heated chamber
- not requiredown data sheet
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededown data sheet
Its print profile, in the documents' words
- Nozzle 210-250 °C; Bed 35-60 °CExtrudr, TECHNICAL DATA SHEET PLA TOUGHp. 1: Recommended printing settings; p. 1: Hardened Nozzle; p. 1: Recommended settings for printers with a 0.4mm Nozzle
Price
Not in the price sample.
Its 2 documents
What the maker says (6)
- Good for
It combines the ease of printing that PLA is known for with significantly improved impact resistance, ductility and overall toughness, making it ideal for functional prototypes, mechanical components, snap-fits, brackets and end-use parts subject to dynamic or shock loads.
Extrudr, TECHNICAL DATA SHEET PLA TOUGHp. 1 - Benefits
Increased flexibilty and break resistance
Extrudr, TECHNICAL DATA SHEET PLA TOUGHp. 1 - Benefits
Less brittle than standard PLA
Extrudr, TECHNICAL DATA SHEET PLA TOUGHp. 1 - Benefits
Biodegradable (EN 13432)
Extrudr, TECHNICAL DATA SHEET PLA TOUGHp. 1 - Warping and shrinkage
Mould shrinkage ISO 294-4 % 0.3
Extrudr, TECHNICAL DATA SHEET PLA TOUGHp. 1 - Nozzle wear
Hardened Nozzle No
Extrudr, TECHNICAL DATA SHEET PLA TOUGHp. 1
UltiMaker TOUGHStrength XY, MPa—Strength Z, MPa—Modulus XY, GPa—Charpy notched, kJ/m²—HDT 0.45, °C—HDT 1.8, °C—Price, CAD/kg—Nozzle, °C215Bed, °C30–65Chamber, °CnoneDrying, °C, h508 h
UltiMaker TOUGHUltiMaker
Published values
| Property | As published | Conditions | On the Overview |
|---|---|---|---|
| UltiMaker, MAKERBOT TOUGH FILAMENT9 valuesUnless a row says otherwise: moulded bar (resin supplier's value) | |||
| Tensile modulus orientation not stated | 395,000 psip. 2: Tensile Modulus | no standard namedAs the sheet prints it: 2723 MPa | not in the median: measured on a moulded bar |
| Tensile strength (yield or break not stated) orientation not stated | 5,710 psip. 2: Tensile Strength | no standard namedAs the sheet prints it: 39.3 MPa | not in the median: measured on a moulded bar |
| Elongation at break orientation not stated | 2.09 %p. 2: Elongation (%) | no standard stated | not in the median: measured on a moulded bar |
| Flexural modulus orientation not stated | 343,000 psip. 2: Flexural Modulus | no standard namedAs the sheet prints it: 2,364 MPa | not in the median: measured on a moulded bar |
| Flexural strength orientation not stated | 9,190 psip. 2: Flexural Strength | no standard namedAs the sheet prints it: 63.3 MPa | not in the median: measured on a moulded bar |
| Izod impact strength | 384 J/mp. 2: Notched IZOD Hinged (impact) 7.2 ft-lb/in | no standard namedAs the sheet prints it: impact 7.2 ft-lb/in | not in the median: in J/m |
| Izod impact strength orientation not stated | 2550 J/mp. 2: Unnotched IZOD Hinged (impact) 47.7 ft-lb/in | ASTM D256 | not in the median: in J/m |
| Glass transition temperature | 60-65°Cp. 2: Glass Temp | no standard stated | not in the median: the resin supplier's value, not a printed part |
| Melting temperature | 150-160 °Cp. 2: Melting Temp 302-320°F | no standard namedAs the sheet prints it: 302-320°F | |
Print settings
- Nozzle
- 215 °Cown data sheet
- Bed
- 30–65 °CBambu Lab Filament Guide
- Heated chamber
- not requiredBambu Lab Filament Guide
- Drying
- optional: 50 °C for 8 hBambu Lab Filament Guide
- Hardened nozzle
- not neededBambu Lab Filament Guide
Its print profile, in the documents' words
- Nozzle 215°CUltiMaker, MAKERBOT TOUGH FILAMENTp. 2: Nozzle Temp
Price
Not in the price sample.
Its 2 documents
What the maker says (5)
- Good for
Ideal for working prototypes and manufacturing aids
UltiMaker, MAKERBOT TOUGH FILAMENTp. 1 - Benefits
Highly-machinable for a wide range of post-processing techniques
UltiMaker, MAKERBOT TOUGH FILAMENTp. 1 - Warping and shrinkage
Significantly less warping and curling than ABS without the need for heated build plates
UltiMaker, MAKERBOT TOUGH FILAMENTp. 1 - Benefits
With MakerBot Tough filament, parts can be printed with ease on MakerBot 3D printers without the need for excessive adjustments or tweaking.
UltiMaker, MAKERBOT TOUGH FILAMENTp. 2 - Surface finish
Throw your printed part into the CNC or drill press; tap some threads and bolt on a steel bracket, or sand the surface down and apply paint for a finished presentation piece.
UltiMaker, MAKERBOT TOUGH FILAMENTp. 2
No product matches "".
Values are for the colour each sheet tested; pigment can change them.